Does Mac OS X in 64 bits takes longer to boot than in 32 bits?
Hello, Does Mac OS X 10.6.3 in 64 bits mode takes longer to boot than in 32 bits mode?. If I boot Mac OS X in my MacBook Pro 5.1 in 64 bits mode it takes 51.3 sec, and if I boot it in 32 bits mode it takes 33.1 sec. I just want to know if this is normal or not. And in case this is normal I would appreciate it a lot if someone could explain me why it takes longer to boot in 64 bits mode than in 32 bits mode.
Thank you a lot for any help that you could give me
Just the opposite for me. My early 2008 Mac Pro definitely boots (and runs) faster in 64 bit mode. As Barry mentioned though, you may not want to do this.
The main rule is kernel extensions. If you have anything that needs to load on boot that is only 32 bit (mouse, keyboard, scanner or other type of driver/software), then you must boot in 32 bit mode or they won't load.
As long as all of your boot software is 64 bit compatible, then booting 64 bit is fine. 32 bit software you launch after the OS is up and running will still run as 32 bit with the OS in 64 bit mode.
Similar Messages
-
4" x 6" videos take longer to open than a 3" x 5" vid? Load time affected?
I think I know the answer to my question but I want to make sure before I go and change the sizes of all my little mini videos:
Does the speed at which a video opens depend (among other things) on the DIMENSIONS OF THE VIEWING BOX? So that a 3“ x 5” picture takes longer to open than, say, a 4“ X 6” picture?
Is the difference a noticeable one? If a larger picture means waiting only two more seconds for the video to open and show, then that seems an Ok payoff to me. But if the wait becomes considerably longer, than it probably is not Ok to the visitor.
Thank you.
~ Lorna in Southern California
http://web.mac.com/lorna6Winston C... I mean at the point where a visitor to my website has already opened the Big Album Index page and clicks onto one of my mini videos, like the Dominatrix Rise Up vid. If I were to make smaller the box in which you see the Dominatrix speaking, would that page open up faster? If yes, then is it substantially faster? Or am I ok just leaving the dimensions of the box alone?
~ Lorna in Southern California
mywebsite -
New I7 quad-core takes longer to boot up than old imac?
Just got my new I7 quad-core last night. (Looks gorgeous, by the way.) Transferred everything over from my old 24" 2.33GHz iMac.... all is well, only had one app hiccup so far (had to reinstall iTunes for some reason).
Anyway, did a side-by-side startup this morning, and the old iMac basically kicked the new one's butt - it started up about 50% faster.
Does this seem right? Is there a reason the new iMac, running basically the same exact system with same apps, preferences, etc, would take longer to boot up?i think the new one was rebooting from a bootable backup i had created. changed that in startup disc settings... seems faster rebooting now.
and i transferred everything over via migration assistant (allowed it to move everything upon my first startup when it asked if i wanted to transfer data from another mac).... -
LEOPARD SEEMS TO TAKE LONG TO BOOT UP???
I am new to MacIntosh. I was a former PC user that converted to a MacIntosh iMac 24" Screen. When I purchased the iMac, it came with Tiger OS. I recently purchased Leopard from Apple On-Line and I installed Leopard but it seems to take longer to boot up than Tiger did. Is that normal or did I do something wrong installing Leopard? Any suggestions would be appreciated.
Thanks in advance.
relaxedI've noticed the longer boot times as well. I first upgraded from Tiger and then bought a brand new hard drive and did a clean install. Both drives have a boot time about twice as long as Tiger did (40 seconds compared to 20 seconds).
I don't think you did anything wrong but it never hurts to run the disk repair options available to you. Rest assured that there have been many posts and mentions of the longer boot time and that it seems to be normal even with the .5.2 updates.
I guess there's nothing to worry about except being more relaxed for the 40 seconds? You can also just put the computer to sleep as opposed to shutting it off. Apple does a much better of 'hibernating' than MS did with Windows. But, from my own non-scientific experience, riding on a bus or car with hibernating Mac notebook could do something to the hard drive which I'd only had for 3 months. Mine died not too long after I started taking the rough-riding bus to work and had it in sleep mode. Don't know if there's a correlation, but there could be so I'm just throwing it out there.
Hope some of this helps! -
Why does my MacBook take long to boot up
If I force shutdown my MacBook then restart it, it stays on the load screen for minutes sometimes beyond an hour. I have already verified and repaired the disks and permissions but it still takes long to load. Any ideas why it could be taking so long to reboot?
The first thing to do is startup up in Safe Mode and see if the machine behaves acceptably. There is a second knowldege base article that may help give further guidance.
-
Macbook pro takes long to boot up 30 minutes
Hi all,
First of all, thanks for all the help this community has provided so far.
Unfortunately I haven't been able to find a solution so far.
Product:
MacBook Pro (13-inch, Mid 2010)
OS X 10.6.8
2.4GHz Intel core 2 duo
4GB 1067 MHz DDR3
It is quite old, but for no reason, the performance is going downhill and every day is taking longer to boot or work with it.
The spinning ball appears after every action and it takes more than 30 minutes to boot (I'm now writing from a different laptop as it has become practically unusable). Good news is I did backup everything when it started performing poorly.
Actions so far:
Apple Hardware extended Test, run 3 times, no errors.
Check disk errors: no errors
Check and fix disk permissions: no improvement
I'm running out of ideas...
Obviously, it has been long time out of warranty, and I'm not sure is worth an expensive fix as I know I have to replace it soon.
I would like to keep it as a secondary laptop.
Do you have any ideas about tests I haven't run?
Thanks in advance!
System.log:
Oct 9 21:35:21 localhost bootlog[41]: BOOT_TIME: 1381350857 0
Oct 9 21:37:41 localhost DirectoryService[36]: Improper shutdown detected
Oct 9 21:38:28 localhost blued[42]: Apple Bluetooth daemon started
Oct 9 21:39:14 localhost com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:39:19: --- last message repeated 2 times ---
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: timed out waiting for IOKit to quiesce
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: Busy services :
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: MacBookPro7,1 [1]
Oct 9 21:39:19 localhost configd[39]: InterfaceNamer: No network stack object
Oct 9 21:39:20 localhost mDNSResponder[26]: mDNSResponder mDNSResponder-258.21 (May 26 2011 14:40:13) starting
Oct 9 21:39:21 MacBook-Pro-di-xxx-xxx configd[39]: setting hostname to "MacBook-Pro-di-xxx-xxx.local"
Oct 9 21:39:21 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:40:24 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:40:30: --- last message repeated 3 times ---
Oct 9 21:40:26 MacBook-Pro-di-xxx-xxx com.apple.usbmuxd[19]: usbmuxd-323 on Jul 29 2013 at 23:21:29, running 64 bit
Oct 9 21:40:30 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:40:31: --- last message repeated 3 times ---
Oct 9 21:40:31 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:40:31 MacBook-Pro-di-xxx-xxx mDNSResponder[26]: mDNSPlatformSetDNSConfig: Error: dns_configuration_copy returned NULL
Oct 9 21:40:31 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:40:34 MacBook-Pro-di-xxx-xxx root[73]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
Oct 9 21:40:34 MacBook-Pro-di-xxx-xxx root[73]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.euro.apple.com
Oct 9 21:40:34 MacBook-Pro-di-xxx-xxx root[73]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
Oct 9 21:40:42 MacBook-Pro-di-xxx-xxx XProtectUpdater[17]: NSURLConnection error: Error Domain=NSURLErrorDomain Code=-1009 UserInfo=0x102c0f2e0 "This computer’s Internet connection appears to be offline." Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1009 UserInfo=0x102c14e40 "This computer’s Internet connection appears to be offline.")
Oct 9 21:40:42 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.xprotectupdater[17]): Exited with exit code: 255
Oct 9 21:40:43 MacBook-Pro-di-xxx-xxx crsud[37]: INSERT-HANG-DETECTED: Tx time:4.395696, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Oct 9 21:41:46 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:41:46: --- last message repeated 2 times ---
Oct 9 21:41:46 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:42:07: --- last message repeated 3 times ---
Oct 9 21:42:07 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:42:08: --- last message repeated 9 times ---
Oct 9 21:42:08 MacBook-Pro-di-xxx-xxx /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[27]: Login Window Application Started
Oct 9 21:42:09 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:42:20: --- last message repeated 7 times ---
Oct 9 21:42:18 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.apple.SystemStarter): Failed to count the number of files in "/System/Library/StartupItems": No such file or directory
Oct 9 21:42:20: --- last message repeated 1 time ---
Oct 9 21:42:20 MacBook-Pro-di-xxx-xxx ntpd[15]: bind() fd 26, family 30, port 123, scope 6, addr fe80::f2b4:79ff:fe15:2ecd, in6_is_addr_multicast=0 flags=0x11 fails: Can't assign requested address
Oct 9 21:42:20 MacBook-Pro-di-xxx-xxx ntpd[15]: unable to create socket on en1 (5) for fe80::f2b4:79ff:fe15:2ecd#123
Oct 9 21:43:09 MacBook-Pro-di-xxx-xxx configd[39]: network configuration changed.
Oct 9 21:43:32 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[89]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:44:14 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:44:14 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Rescanning kernel extensions.
Oct 9 21:44:14 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:44:56: --- last message repeated 8 times ---
Oct 9 21:44:28 MacBook-Pro-di-xxx-xxx ntpd[15]: time reset -4.894810 s
Oct 9 21:44:56 MacBook-Pro-di-xxx-xxx com.apple.launchctl.LoginWindow[96]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:46:38 MacBook-Pro-di-xxx-xxx loginwindow[27]: Login Window Started Security Agent
Oct 9 21:46:42 MacBook-Pro-di-xxx-xxx mdworker[82]: (Error) SyncInfo: Catalog changed during searchfs too many times -- falling back to fsw search /
Oct 9 21:46:42 MacBook-Pro-di-xxx-xxx loginwindow[27]: Login Window - Returned from Security Agent
Oct 9 21:46:42 MacBook-Pro-di-xxx-xxx loginwindow[27]: USER_PROCESS: 27 console
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[109]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Aqua[110]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Aqua[110]: launchctl: Dubious permissions on file (skipping): /etc/mach_init_per_user.d/com.adobe.SwitchBoard.monitor.plist
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.kodak.BonjourAgent): Unknown key for string: Kodak Version
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.kodak.BonjourAgent): Unknown key: Kodak Version
Oct 9 21:46:45 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Oct 9 21:46:46 MacBook-Pro-di-xxx-xxx com.apple.launchd[1] (com.wacom.pentablet[100]): Exited with exit code: 255
Oct 9 21:46:49 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:47:19: --- last message repeated 1 time ---
Oct 9 21:47:46 MacBook-Pro-di-xxx-xxx com.hp.messagecenter.launcher[131]: ThrottleProcessIO: throttling disk i/o
Oct 9 21:48:01 MacBook-Pro-di-xxx-xxx fontd[142]: Database content version mismatch (stored(15) != expected(14))
Oct 9 21:48:01 MacBook-Pro-di-xxx-xxx fontd[142]: Failed to open read-only database, regenerating DB
Oct 9 21:48:03 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.apple.Kerberos.renew.plist[126]): Exited with exit code: 1
Oct 9 21:48:03 MacBook-Pro-di-xxx-xxx Adobe Reader Updater Helper[137]: INSERT-HANG-DETECTED: Tx time:29.652770, # of Inserts: 0, # of bytes written: 0, Did shrink: NO
Oct 9 21:48:06 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.501[108] (com.apple.mrt.uiagent[125]): Exited with exit code: 255
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 713 at LoadConfigurationFile() [60/65794 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 713 at LoadConfigurationFile() [60/65794 ms]: First time checking the Info.plist!
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 948 bytes from the Info.plist.
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging key was found! Checking its value ...
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging prefix was found! Checking its value ...
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: No change in the logging value.
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: About to load configuration files ...About to load configuration files ...
Oct 9 21:49:26 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 8935 bytes from the global plist.
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOTwainScanToPath = /Library/Printers/Kodak/AiO_Printers/Utilities/Twain Scan To.app
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gNumPluginsToUse = 2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[0] = /Library/Image Capture/Devices/KODAK AiO Scan Driver.app
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[1] = /Library/Image Capture/Devices/KODAK AiO2 Scan Driver.app
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[0] = /Library/Printers/Kodak/AiO_Printers/AIOIO.plugin
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[1] = /Library/Printers/Kodak/AiO_Printers/AIO2IO.plugin
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[0] = 15
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[1] = 17
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelPID = 16421
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelName = 5100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelType = 0
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelPID = 16422
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelName = 5300
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelType = 1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelPID = 16423
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelName = 5500
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelType = 2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelPID = 16433
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelName = ESP 3
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelType = 3
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelPID = 16434
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelName = ESP 5
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelType = 5
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelVID = 16700
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelPID = 21251
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelName = Dell
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelType = 6
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelPID = 16446
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelName = ESP 7
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelType = 7
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelPID = 16447
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelName = ESP 9
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelType = 9
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelPID = 16451
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelName = ESP 3200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelType = 3200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelPID = 16449
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelName = ESP 5200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelType = 5200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelPID = 16467
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelName = ESP Office 4100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelType = 4100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelPID = 16468
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelName = ESP Office 6100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelType = 6100
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelPID = 16470
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelName = ESP 7200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelType = 7200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelPID = 16485
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelName = ESP 9200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelType = 9200
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelPID = 16457
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelName = ESP LION
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelType = 11
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelPID = 16471
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelName = 110
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelType = 110
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelPID = 16472
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelName = 115
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelType = 115
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelPID = 16477
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelName = 310
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelType = 310
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelPID = 16478
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelName = 315
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelType = 315
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelPID = 16473
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelName = ESP Office 2150
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelType = 2150
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelPID = 16486
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelName = ESP Office 2170
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelType = 2170
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelPID = 16482
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelName = Office HERO 6.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelType = 601
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelPID = 16484
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelName = HERO 5.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelType = 501
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelPID = 16483
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelName = HERO 7.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelType = 701
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelPID = 16487
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelName = HERO 9.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelType = 901
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelPID = 16493
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelName = HERO 3.1
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelType = 301
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelPID = 16490
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelName = ESP 1.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelType = 102
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelPID = 16491
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelName = ESP 3.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelType = 302
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelPID = 16475
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelName = HERO 6.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelType = 602
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelPID = 16474
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelName = HERO 8.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelType = 802
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelPID = 16488
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelName = HERO 2.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelType = 202
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelVID = 1034
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelPID = 16489
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelName = HERO 4.2
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelType = 402
Oct 9 21:49:29 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained all of gPrinterDescriptorArray[][]!
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 518 bytes from the local plist.
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPluginIndex_RTC = 1
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gScanPathPrefix = /tmp/aioscan
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOMaxSharedPrinters[0] = 8
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOMaxSharedPrinters[1] = 8
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOSharedMemoryBlockSize[0] = 66560
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOSharedMemoryBlockSize[1] = 131072
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 731 at LoadConfigurationFile() [70/70924 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 731 at LoadConfigurationFile() [70/70924 ms]: ... Finished loading configuration files.... Finished loading configuration files.
Oct 9 21:49:30 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 388 at main() [70/70924 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 388 at main() [70/70924 ms]: *** Starting Bonjour Agent! ****** Starting Bonjour Agent! ***
Oct 9 21:49:32 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:49:34: --- last message repeated 1 time ---
Oct 9 21:49:34 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 209 at SwitchEventsRegister() [70/74683 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 209 at SwitchEventsRegister() [70/74683 ms]: Switch events are now registered!Switch events are now registered!
Oct 9 21:49:35 MacBook-Pro-di-xxx-xxx WindowServer[78]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Oct 9 21:49:35 MacBook-Pro-di-xxx-xxx com.apple.WindowServer[78]: Wed Oct 9 21:49:35 MacBook-Pro-di-xxx-xxx.local WindowServer[78] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 607 at LoadConfigurationFile() [90/1610 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 607 at LoadConfigurationFile() [90/1610 ms]:
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: First time checking the Info.plist!
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 1259 bytes from the Info.plist.
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging key was found! Checking its value ...
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Logging prefix was found! Checking its value ...
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: No change in the logging value.
Oct 9 21:50:01 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: About to load configuration files ...About to load configuration files ...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: <CFURL 0x10c5b0 [0xa
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: 0669ec0]>{type = 0, string = /Library/Printers/Kodak/AiO_Printers/KodakAi
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: OBonjourAgent.app/Contents/MacOS/KodakAiOBonjourAgent, encoding = 134217984, base = (null)}
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Read 8935 bytes from the global plist.
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOTwainScanToPath = /Library/Printers/Kodak/AiO_Printers/Utilities/Twain Scan To.app
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gNumPluginsToUse = 2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[0] = /Library/Image Capture/Devices/KODAK AiO Scan Driver.app
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOICAScanDriverPath[1] = /Library/Image Capture/Devices/KODAK AiO2 Scan Driver.app
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[0] = /Library/Printers/Kodak/AiO_Printers/AIOIO.plugin
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gAiOPluginPath[1] = /Library/Printers/Kodak/AiO_Printers/AIO2IO.plugin
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[0] = 15
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained gPrinterDescriptorArrayNumItems[1] = 17
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelPID = 16421
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelName = 5100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][0].modelType = 0
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelPID = 16422
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelName = 5300
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][1].modelType = 1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelPID = 16423
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelName = 5500
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][2].modelType = 2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelPID = 16433
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelName = ESP 3
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][3].modelType = 3
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelPID = 16434
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelName = ESP 5
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][4].modelType = 5
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelVID = 16700
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelPID = 21251
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelName = Dell
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][5].modelType = 6
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelPID = 16446
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelName = ESP 7
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][6].modelType = 7
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelPID = 16447
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelName = ESP 9
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][7].modelType = 9
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelPID = 16451
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelName = ESP 3200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][8].modelType = 3200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelPID = 16449
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelName = ESP 5200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][9].modelType = 5200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelPID = 16467
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelName = ESP Office 4100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][10].modelType = 4100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelPID = 16468
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelName = ESP Office 6100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][11].modelType = 6100
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelPID = 16470
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelName = ESP 7200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][12].modelType = 7200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelPID = 16485
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelName = ESP 9200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][13].modelType = 9200
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelPID = 16457
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelName = ESP LION
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[0][14].modelType = 11
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelPID = 16471
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelName = 110
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][0].modelType = 110
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelPID = 16472
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelName = 115
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][1].modelType = 115
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelPID = 16477
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelName = 310
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][2].modelType = 310
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: 3].modelPID = 16478
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelName = 315
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][3].modelType = 315
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelPID = 16473
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelName = ESP Office 2150
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][4].modelType = 2150
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelPID = 16486
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelName = ESP Office 2170
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][5].modelType = 2170
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelPID = 16482
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelName = Office HERO 6.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][6].modelType = 601
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelPID = 16484
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelName = HERO 5.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][7].modelType = 501
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelPID = 16483
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelName = HERO 7.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][8].modelType = 701
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelPID = 16487
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelName = HERO 9.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][9].modelType = 901
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelPID = 16493
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelName = HERO 3.1
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][10].modelType = 301
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelPID = 16490
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelName = ESP 1.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][11].modelType = 102
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelPID = 16491
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelName = ESP 3.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][12].modelType = 302
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelPID = 16475
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelName = HERO 6.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][13].modelType = 602
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelPID = 16474
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelName = HERO 8.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][14].modelType = 802
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelPID = 16488
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelName = HERO 2.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][15].modelType =
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: 202
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelVID = 1034
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelPID = 16489
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelName = HERO 4.2
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: gPrinterDescriptorArray[1][16].modelType = 402
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: Obtained all of gPrinterDescriptorArray[][]!
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 625 at LoadConfigurationFile() [100/2978 ms]: PID 130 Thread 0xA00D8540 Configuration.cpp Line 625 at LoadConfigurationFile() [100/2978 ms]: ... Finished loading configuration files.... Finished loading configuration files.
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: A previous signal setting for A previous signal setting for SIGTERMSIGTERM existed, so we save it... existed, so we save it...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2978 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2978 ms]: Preserving old signal handler Preserving old signal handler truetrue for for SIGTERMSIGTERM
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 331 at AssignSignal() [100/2978 ms]: A previous signal setting for A previous signal setting for SIGABRTSIGABRT existed, so we save it... existed, so we save it...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2979 ms]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 159 at PreserveOldSignal() [100/2979 ms]: Preserving old signal handler Preserving old signal handler truetrue for for SIGABRTSIGABRT
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [100/2979 ms]: New thread created: 0xB0185000 from within 0xA00D8540
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 1955 at CommandLine() [100/2979 ms]: Initializing Command Line Mutex...
Oct 9 21:50:02 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 1958 at CommandLine() [100/2979 ms]: ...Command Line Mutex initialized
Oct 9 21:50:13 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 996 at AiOLibrary_InitializeLibrary() [100/13195 ms]: At the start of library initialization, this process has 4 threads running.
Oct 9 21:50:13 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerPrinterAPI.cpp Line 999 at AiOLibrary_InitializeLibrary() [100/13195 ms]: ******************* LIBRARY INITIALIZED *******************
Oct 9 21:50:13 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 882 at StartScanHostBroadcast() [100/13207 ms]: We have a listening socket #5
Oct 9 21:50:22 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [100/22740 ms]: New thread created: 0xB0218000 from within 0xA00D8540
Oct 9 21:50:24 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB0218000 TigerLibraryUtilities.cpp Line 2737 at ThreadExit() [100/24972 ms]:
Oct 9 21:50:24 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerTCPUtilities.cpp Line 560 at BonjourBrowserClientCallback() [100/24972 ms]: About to kill thread We are completing this thread!0xB0218000
Oct 9 21:50:25 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 1017 at StartScanHostBroadcast() [100/25311 ms]: Starting Bonjour ScanTo service for: MacBook-Pro-di-xxx-xxx
Oct 9 21:50:28 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 445 at GetApplicationListFromPrefs() [110/28542 ms]: Found Scan Host Application: Preview
Oct 9 21:50:28 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 PumaScanHost.cpp Line 863 at ConstructScanHostBonjourTXTRecord() [110/28542 ms]: Scan Host Bonjour TXT Record = txtvers=1.vid=040a#mfg=Eastman Kodak Company,product=Host ScanTo Service AppCnt=01.A00=Preview
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38464 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38464 ms]: ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #00!!
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38630 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 456 at main() [110/38630 ms]: ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #ICA Scan Driver installed, so we do NO USB Button Listening for Plugin #11!!
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 main.cpp Line 473 at main() [110/38630 ms]: PID 130 Thread 0xA00D8540 main.cpp Line 473 at main() [110/38630 ms]: No list of pids, so we are doing no USB Button Listening!No list of pids, so we are doing no USB Button Listening!
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [110/38631 ms]: PID 130 Thread 0xA00D8540 TigerLibraryUtilities.cpp Line 2571 at ThreadCreate() [110/38631 ms]: New thread created: New thread created: 0xB031C0000xB031C000 from within from within 0xA00D85400xA00D8540
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 553 at RTCThread() [110/38632 ms]:
Oct 9 21:50:38 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 553 at RTCThread() [110/38632 ms]: 10 second delay in place before RTC starts up ...10 second delay in place before RTC starts up ...
Oct 9 21:50:41 MacBook-Pro-di-xxx-xxx com.apple.kextd[10]: Can't create kext cache under / - owner not root.
Oct 9 21:50:48: --- last message repeated 1 time ---
Oct 9 21:50:48 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 568 at RTCThread() [110/48632 ms]: PID 130 Thread 0xB031C000 RTC.cpp Line 568 at RTCThread() [110/48632 ms]: ****** RTC Starting up! ******
Oct 9 21:50:48 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: ****** RTC Starting up! ******
Oct 9 21:50:48 MacBook-Pro-di-xxx-xxx com.kodak.BonjourAgent[130]: PID 130 Thread 0xB031C000 RTC.cpp Line 571 at RTCThread() [110/48632 ms]: PID 130 Thread 0xB031C000 RTC.cpp Line 571 at RTCThread() [110/48632 ms]: ****** Turning on RTC! ************ Turning on RTC! ******
Oct 9 21:51:37 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[171]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:51:38 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KeystoneDaemon logServiceState] GoogleSoftwareUpdate daemon (1.1.0.3659) vending:\n com.google.Keystone.Daemon.UpdateEngine: 2 connection(s)\n com.google.Keystone.Daemon.Administration: 0 connection(s)
Oct 9 21:51:38 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateEngine updateProductID:] KSUpdateEngine updating product ID: "com.google.Keystone"
Oct 9 21:51:39 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSCheckAction performAction] KSCheckAction checking 1 ticket(s).
Oct 9 21:51:40 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction starting update check for ticket(s): {(\n <KSTicket:0x505320\n productID=com.google.Keystone\n version=1.1.0.3659\n xc=<KSPathExistenceChecker:0x502c00 path=/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/>\n serverType=Omaha\n url=https://tools.google.com/service/update2\n creationDate=2013-03-10 09:43:17\n >\n)}\nUsing server: <KSOmahaServer:0x21d490\n engine=<KSDaemonUpdateEngine:0x215e40>\n params={\n EngineVersion = "1.1.0.3659";\n ActivesInfo = {\n "com.google.Keystone" = {\n LastActiveDate = 2013-10-09 21:51:32 +0100;\n LastActivePingDate = 2013-10-08 08:00:24 +0100;\n LastRollCallPingDate = 2013-10-08 08:00:24 +0100;\n };\n "com.google.Chrome" = {\n LastActiveDate = 2013-10-08 18:18:34 +0100;\n LastActivePingDate = 2013-10-08 08:00:01 +0100;\n LastRollCallPingDate = 2013-10-08 08:00:01 +0100;\n };\n "com.google.android.mtpviewer" = {\n LastActivePingDate = 2013-05-19 08:00:00 +0100;\n LastActiveDate = 2013-05-19 18:17:07 +0100;\n LastRollCallPingDate = 2013-05-19 08:00:00 +0100;\n };\n "com.google.talkplugin" = {\n LastActiveDate = 2013-09-18 22:04:59 +0100;\n LastActivePingDate = 2013-09-19 08:00:00 +0100;\n LastRollCallPingDate = 2013-10-08 08:00:11 +0100;\n };\n };\n UserInitiated = 0;\n IsSystem = 1;\n OmahaOSVersion = "10.6.8_i486";\n Identity = KeystoneDaemon;\n AllowedSubdomains = (\n ".omaha.sandbox.google.com",\n ".tools.google.com",\n ".www.google.com",\n ".corp.google.com"\n );\n }\n>
Oct 9 21:51:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateCheckAction performAction] KSUpdateCheckAction running KSServerUpdateRequest: <KSOmahaServerUpdateRequest:0x223110\n server=<KSOmahaServer:0x21d490>\n url="https://tools.google.com/service/update2"\n runningFetchers=0\n tickets=1\n activeTickets=1\n rollCallTickets=1\n body=\n <?xml version="1.0" encoding="UTF-8" standalone="yes"?>\n <o:gupdate xmlns:o="http://www.google.com/update2/request" protocol="2.0" version="KeystoneDaemon-1.1.0.3659" ismachine="1">\n <o:os platform="mac" version="MacOSX" sp="10.6.8_i486"></o:os>\n <o:app appid="com.google.Keystone" version="1.1.0.3659" lang="en-us" installage="213" brand="GGLG">\n <o:ping r="1" a="1"></o:ping>\n <o:updatecheck></o:updatecheck>\n </o:app>\n </o:gupdate>\n>
Oct 9 21:52:01 MacBook-Pro-di-xxx-xxx com.apple.launchctl.Background[178]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
Oct 9 21:54:07 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[NSTask(KSKill) killGroup] [NSTask killGroup] process group 173 did not respond to TERM, sending KILL.
Oct 9 21:55:31 MacBook-Pro-di-xxx-xxx kernel[0]:
Oct 9 21:55:49: --- last message repeated 1 time ---
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSOutOfProcessFetcher(PrivateMethods) helperDidTimeout:] KSOutOfProcessFetcher timeout while waiting for fetch. [com.google.UpdateEngine.CommonErrorDomain:1502]
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSServerUpdateRequest(PrivateMethods) fetcher:failedWithError:] KSServerUpdateRequest fetch failed. (productIDs: com.google.Keystone) [com.google.UpdateEngine.CoreErrorDomain:702 - 'https://tools.google.com/service/update2'] (KSOutOfProcessFetcher timeout while waiting for fetch. [com.google.UpdateEngine.CommonErrorDomain:1502])
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.4294967294[177] (0x1005030e0.anonymous.ksfetch[173]): Failed to add kevent for PID 173. Will unload at MIG return
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx com.apple.launchd.peruser.4294967294[177] (0x1005030e0.anonymous.ksfetch[173]): Unloading PID 173 at MIG return.
Oct 9 21:55:49 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateCheckAction(PrivateMethods) finishAction] KSUpdateCheckAction found updates: {( )}
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSPrefetchAction performAction] KSPrefetchAction no updates to prefetch.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSMultiUpdateAction performAction] KSSilentUpdateAction had no updates to apply.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSMultiUpdateAction performAction] KSPromptAction had no updates to apply.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSoftwareUpdateDaemon[167]: -[KSUpdateEngine(PrivateMethods) updateFinish] KSUpdateEngine update processing complete.
Oct 9 21:55:50 MacBook-Pro-di-xxx-xxx GoogleSHello London0910. There isn't much more troubleshooting you can do to speed up the computer. I would review this thread for maybe additional resources and suggestions: http://goo.gl/w9o60j
-
I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?
I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac. -
Mac OS 10.4 Mail takes longer to receive than on Outlook Express 5
I receive email via Outlook Express 5.0.6 within an hour (but hate to use it). It can take Mac OS 10.4.8 Mail up to 24 hrs longer. Mail Preferences are set to: Check for new mail:” Every 30 min.” Under Accounts>Advanced: “Enable This Account” and “Include when automatically when checking for new mail” are both checked. The ISP is Comcast. What is the problem?
We have the same problem. The user rights under Leopard are not interpreted correctly while the Tiger clients show the correct entries. I´ve posted another topic to that thing...
-
Does Mac OS 10.8.2 support dictionary in language other than English.
Does Dictionary in Safari and Mail support language other than English (say Chinese and Japanese)? In iOS, I can simply highlight a word, press "Define" and boom...result is there. But in Mac OS, I tried highlighting Chinese and Japanese words, dictionary replied with "Result not found". Is this a setting issue or foreign language dictionary is not yet available in 10.8.2? Thanks!
Wow.....that's fantastic! I couldn't understand a word from my supplier before. Now it works, thanks Tom!
-
Why does wifi takes longer with Lion than Snow Leopard?
My Macbook pro doesn't find my Airport nearly as quick with Lion as it did with Snow Leopard. Many times it will even jump over to another persons unlocked network even though my Airport is at the top of the preferred list of networks. It also shows a box saying that I am not connected even after I am connected, so then I have to click the box just to remove it. This is annoying as ****. Why is this happening? There weren't any similar problems when upgrading fron Leopard to Snow Leopard.
My Macbook pro doesn't find my Airport nearly as quick with Lion as it did with Snow Leopard. Many times it will even jump over to another persons unlocked network even though my Airport is at the top of the preferred list of networks. It also shows a box saying that I am not connected even after I am connected, so then I have to click the box just to remove it. This is annoying as ****. Why is this happening? There weren't any similar problems when upgrading fron Leopard to Snow Leopard.
-
Macbook Pro takes long to boot up, Freezes easily, Gets Gray Screen saying restart
I've had my Macbook Pro 13 since November 2010, I am still running Snow Leopard, never upgraded or anything. Since last March, my computer takes a long time to turn on, get to the screen where I log in. If I click anything when it gets to the screen right away, I can't click anything, the mouse moves, but nothing responds. I have to wait a good 15-20 minutes before I can click anything. I usually turn my computer on, and leave, come back 25-30 minutes later, and log in. When I have over 3 applications open, ex Firefox, MS Word, Spotify, my computer lags, and sometimes freezes. The freezes last from 30 seconds, to me having to restart the computer. Sometimes the computer freezes randomly when I'm just browsing. Around 70-80% of the time, when I play a video, using flash player like youtube, my computer lags, and after watching a video or 2, the computer freezes. Most of the time, the freeze stays frozen, and around 10 minutes later my mouse can move, but the screen is frozen, and the rainbow loading symbol starts. I just restart the computer. Sometimes, around once every 2 days, or sometimes it happens around 10 times in a couple of hours of me using the computer, my computer gets a gray screen that descends down the screen, it says in multiple languages that I have to immediately restart my computer by pressing the power button down and then pressing it again. Oh, and the bottom of my computer always gets really really hot when I use it.
It is a huge hassle, I can still use the computer, but I would love it if my computer was fixed.I am still running Snow Leopard, never upgraded or anything.
What about updates? Check software update.
How large is your hard drive and how much hard drive space do you have left?
Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer. Now reboot.
If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again. If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up. At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver.
If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode.
If the Mac starts up correctly, restart without pressing the "shift" key.
If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
(If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
Restart your computer when done.
Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
Remove any 3rd party ram.
Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
Oh, and the bottom of my computer always gets really really hot when I use it.
User Tip: How to deal with MacBook Pro and MacBook heat?
Per your user manual: Do not operate your MacBook Pro on a pillow or other soft material, as the material can block the airflow vents. Never place anything over the keyboard when operating your MacBook Pro. Never push objects into the ventilation openings.
From MacBook Pro: Care, Use, and Safety Information
For prolonged use, place your MacBook Pro on a flat, stable surface. Do not place your MacBook Pro on your lap or other body surface for extended periods of time. Prolonged body contact can cause discomfort and potentially a burn. -
Macbook now takes longer to boot up after recent software update
On 2/19 I installed the following updates for my MacBook -
iPhoto v6.0.6
Front Row v1.3.1
AirPort Base Station Update 2007-002 v5.2.1
iDVD v6.0.4
MacBook EFI Firmware v1.1
Mac OS X update combined Intel 10.4.11
My MacBook is the 2 ghz intel core 2 duo with 1gb 667 mhz ddr2 sdram, if that matters. What happens is that the initial gray screen during startup is blank for 25 secs. then the Apple logo appears. Soon after, all is quick and good. It's just the weird blank screen that I'm wondering about. Why is it doing this and is this an indication of a problem? What can I do about it? Let me know if you need more info, though I"ll be going to work soon and won't have my laptop.
Thanks!
SueFirst thin you et a chance, Use Disk Utility to verify/Repair the HD, then Repair Permissions then reboot, if the problems persist try reinstalling the big Combo update...
The combo update for Intel-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
Repair Permissions afterwards, reboot.
It is generally trying to repair the HD in that "blank" period... or having trouble reading it. -
My 24" iMac takes 6 rimes longer to boot than my 20"
I have an early 25" iMac, 10.5.2 2.16, 2GB, 500HD. I takes nearly 6 minutes to boot up. I also have an older 20" iMac 10.5.2 2.0, 1GB, 250K with almost exactly same software, etc that boots in less than a minute. Why is the newer model so slow? I do have the 24" connected to 500GB USB for Time Machine.
Steve Anderson5 wrote:
Hi,
I'm not sure this will help but it's worth a try - leave your 24" on overnight go to the "Energy Saver" in Preference set the computer to "Never" Sleep and un-check the box at the bottom to keep the hard drive active. It's OK to put the "Display" to sleep. In the wee hours of the morning the Mac will run certain maintenance programs automatically that may help out your slow boot up. I have a 24"it boots from a cold start in about 30 seconds with several fire wire drives cascaded to the FW 800 port. Maybe you have tried this approach just thought I'd chime in.
Hope it helps,
Steve
Good advice Steve (and the Ancients).
Another option I have used in the past to handle system maintenance is MacJanitor, but it is not made specifically for Intel Macs, and can be buggy. I have found this alternative though, you may want to check it out rather than leave your iMac on 24hrs a day:
http://www.giantmike.com/widgets/Maintidget.html
the site also has this:
http://www.giantmike.com/speedX.html
Let us know how it goes.
~Kort -
ICloud account takes longer to send than other accounts.
I have several accounts configured on my iPhone 4. I've got Yahoo, Gmail and Outlook.com. I just created an iCloud mail account yesterday. So far it takes a fee minutes before my email from my iCloud account gets sent while I have no problems of delay whatsoever in sending with any other of my accounts. How come?
I was having the same problem; but I've found a workaround that might help. Here's what to do:
Set up your iCloud account on your iPhone/iPad with whichever email address you want as your main one; either .me or .mac.
Set up a Gmail account if you don't already have one. It doesn't matter if you don't ever intend you use it for sending email.
Go to your 'Mail, Contacts, Calendars' settings on your iPhone/iPad, and add the Gmail account if you don't already have one set up.
Go into your Gmail settings and under 'Account' list all the email addresses you want want to send from as your secondary option. In my case, I had already set up iCloud with .mac so I've listed the .me one in my Gmail settings. Put a comma and space between each email address. I've got three email addresses listed here. (See screen grab). Oddly, I didn't seem to have the comma key available on my iPad, so I listed my email addresses in 'Notes' and cut/pasted them in.
Now when you send an email, you should have all those addresses available to send from.
Hope this helps.
Tom. -
SAINT/SPAM UPDATE takes longer time more than 12hours
Hi everyone,
I am doing SAINT/SPAM UPDATE version 33 on NW70 systems running on windows 2003 x64 servers with oracle 10g database. The update is running for more than 12 hours and has not finished yet.
Normally SAINT/SPAM update wud take 15 to 20mins. But this is very unusual.
Has anyone faced similar problems before ?
Please suggest solutions if any
thanks
MosesCheck the import monitor and the tp system log to check the status of the patch... please post here any errors found.
Loging using DDIC
ensure 000 client you login
ensure your active login session on CI instance (in case multiple instances)
ensure to shutdown/stop all other instances (Dialog Distances) running on other hosts
This information is inacurate and missleading... You don't need to logon with DDIC you can use any user with the right authorizations, also you don't need to shutdown any instances.
Regards
Juan
Maybe you are looking for
-
Cleaning ou tmy registry recently, I discovered that photoshop is leaving entries in the registry for every file I edit. These are "recent" file entires, but instead of deleting any more than ten, it is keeping them all!!! It does it every time you e
-
How do I delete my current number from showing up on my old iPhone 5?
So my girlfriend and I both upgraded our iPhone 5 to the our new iPhone 6. We backed up both phones and transferred everything to the new phones. I was thinking about selling the phones but I noticed that my current number is still on my old phone
-
I need some drivers for my CD-RW/DVD-ROM drive
I have been going through the apple site for a few hours here and I would really like to speak to a human being about this. This is not hard. I have a Pismo PowerBook G3, which I purchased online, used. Wiped the HD when I got it, installed 10.2.8. U
-
How to run abap reports thru ITS
Hi I have a abap report ( SE38) ,it has a transaction code ( TCODE) ZXXXX. Now i want to run that report from ITS by clicking on the hyperlink. How can I do it .what are the steps involve Regards Ashish
-
Strange reboots and suprising solution !!!
HI !!! I'd like to share my strange experience . What happend - after replecing mobo everything work greate except dial-up connection to interent via Zoltrix modem . I got reboots 1 second after dial-up number selection . It happends in Windows