Does Magic Bullet Looks works with FCP X?

Hi guys, does magic bullet looks or mojo work with FCP X?

http://www.redgiantsoftware.com/blog/2011/06/24/final-cut-pro-x-and-red-giant/

Similar Messages

  • Why does Magic Bullet Looks not work

    Help,
    I am having troubles with the plugin Magic Bullet Looks working with FCP X. I understand it is up to Apple to update and fix this.
    Andy news on this issue?
    Tjapko

    Don't have the plugin.
    http://www.apple.com/feedback/finalcutpro.html
    Or: bugreport.apple.com if you have a developer account...

  • How well does Qmaster via Compressor work with FCP 7?

    How well does Qmaster via Compressor work with FCP 7?

    It works wonderfully as long as you are running (at least) OSX 10.5.6 + QT 7.6 on a serious intel mac.
    x

  • Why does magic mouse not work with duracel batteries

    I bought an iMac a few months ago.
    Now the batteries from the magic mouse are empty and I had to buy new ones.
    Only they don't work. I had to pick cheap batteries from others devices.
    Can anyone tell me which brand wil work?
    Thanks,
    Bernadette

    I bought my iMac 2 years ago, it came with a Magic Mouse, within several months I started having the same battery issues. I looked here, and on the Internet to find out if the problem was already known about, but found only people guessing wrongly at what the problem is. I do hope Apple has fixed this, but unfortunately many of got stuck with a junk Magic Mouse. As an Engineer with 25+ years of experience in the design of electrical contacts & connectors which includes over 2 dozen patents ... believe me when I say the problem here is that the recessed positive contacts (at the on/off switch end) are too deeply recessed to make contact with the industry allowed variation in AA batteries. Those contacts are too deeply recessed because the plastic is too thick (in the hole that forms the recess) and the metal contacts are not tightly up against the backside of that plastic wall, in fact it looks like they are installed with a gap and/or can deform/bend away further opening that gap even larger. As mentioned above many industry AA battery standards define the positive button contact height as being 1.0mm or larger ... however that plastic wall is about 1mm thick, add the gap for the metal contacts and you have no electrical contact no matter how much contact spring force there is at the negative end. Unfortunately, there is no simple good fix for the average person to perform, the recessed contacts can't be accessed to bend them to remove that gap and the pastic is too thick anyway .. leaving us with a "duct tape" fix, like wadding some tin foil into that positive terminal recess and swearing when it falls out during battery changes. A nice elegent fix, would involve disassembling the mouse, machining plastic, backing up those terminals... absurd right?... would be easier if Apple sent us a new mouse that works.
    This problem has nothing to do with overall battery length, battery diameter, or inadequate spring contact force from the negative mouse contacts. Also I doubt the brand or type of battery is the issue for anyone, the positive button heights vary among brands/types, but probably are 1.0mm or larger per the industry specs, Apple just didn't design this mouse to that industry spec, or they did not control their manufacturing quality to yield what they designed. This iMac was my FIRST Apple purchase after decades of avoiding and dismissing Apple, ironically they won me over with their progress and high quality products ... I'm rather disappointed.

  • Why does Magic Bullet looks crash my After Effects and computer when I open it?

    I don't really know how else to explain. I've tried re-installing both. I don't know what else to do. I'm on After Effects CS5.

    Just updated my display drivers.
    Then un-update them. MBL is, after all, driven by OpenGL and may frown on the slightest variation there. Also inquire with Red Giant Software what driver versions they support.
    Mylenium

  • Final cut express 4/magic bullet looks

    does magic bullet looks work with final cut express 4?

    Click on one of your source clips in the FCE Browser to select it, and  once selected type Command + 9 to see the Item Properties for the clip. Either report those properties here, or take a screen shot of the Item Properties and post that screen shot here.
    Next, click on the icon for the troublesome sequence in the FCE Browser to select it, and once selected type Command + 9 to see the properties for the sequence you are editing. Either report those properties here, or take a screen shot of the properties of your sequence and post that screen shot here.
    MtD

  • Magic Bullet Look Suite 2 Messing Up FCP

    I just installed Magic Bullet Look Suite 2, and now whenever I try to open FCP it tells me it has quit unexpectedly. You know when you first open the program, and as it's loading there's that box in the middle of the screen with the name and logo of the application? Well, in there you can see all the parts of FCP that it's loading, and when it gets to Magic Bullet Look Suite 2, that's when it closes. I've tried restarting my computer, uninstalling and reinstalling the files, but every time it causes FCP to close. Does anyone have a solution so that I can use Look Suite 2 without FCP closing every time?

    http://www.redgiantsoftware.com/magic.html
    I had an older version of the Magic Bullet plug ins and I just downloaded the newer version and my serial number worked fine.
    I did actually have one of the filters crash a render yesterday... so not all is good on my system either.

  • FCP Crashes while using Magic Bullet Looks

    Hi All,
    We have recently installed Magic Bullet Looks onto our main edit machine. However, using it causes FCP to crash with really annoying regularity. It seems to be related to either auto save or thumbnails (opening a sequence with Looks applied and it will crash while loading the thumbnails onto the timeline for example - that could be a coincidence as it crashes in many other situations as well but always when working with MBL))
    I've tried the usual preference trashing things but can't stop it happening. Anyone had any similar issues that they've been able to resolve? We aren't yet running Snow Leopard but I may try that as a potential solution.
    If it matters - the machine is dual 3.2 quad core with 6GB of RAM running FCP 7. It also has a Blackmagic Extreme card (tried turning external video off - no difference)
    All thoughts greatly appreciated,
    Regards and a happy new year to all,
    Richard

    Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
    R

  • Red line with Magic Bullet Looks

    Magic Bullet Looks in the Video Effects panel shows as a 32 GPU accelerated effect.
    However, when I add it to a clip in timeline one, two or three, I go from no lines (including yellow) to a red line above that clip.
    If it's a GPU accelerated effect why am I seeing a red line above the clip when I add that effect?
    My card is a 285 that works fine with everthing else.

    Magic Bullit Looks is not a accelerated effect, so that is why you are seeing the red line.
    Effects with the icon on the left are accelerated.

  • After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

    Hi,
    I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
    I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
    On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
    I am running:
    MacBook Pro
    OS 10.9.4
    Processor  2.3 GHz Intel Core i72.3 GHz Intel Core i7
    Memory  8 GB 1333 MHz DDR3
    Graphics  AMD Radeon HD 6750M 1024 MB
    Cuda  6.0.54
    The footage is Apple Quicktime ProRes HQ
    I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
    I am at a loss as of how to fix or even work around this. Any help would be appreciated.
    Thanks

    There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

  • Adobe premiere pro cc 2014 freezing with magic bullet looks

    Hi-
    I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it.  The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable.  Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved.  I've already done hours and hours of editing in 2014 only to keep having crashes.
    Is anyone looking into this or has any recommendations so I can get work done.
    Thanks!
    -Lok

    I don't use magic bullet Looks but is that a 3rd party plugin?
    If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
    http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

  • XML Crashing FCP while importing.  Magic Bullet Looks could be the problem

    Hi All,
    Need a little help here.
    I am using FCP 6.0.5 on a power mac G-5.
    I am trying to open an XML which was exported out of FCP 7 as a version 4 XML.
    Magic Bullet Looks is being used on the project, and I think this is were the problem is.
    when importing the XML it crashes FCP when I select the Include Video/Audio Effects.
    When I import the XML without this option selected it opens fine.
    I have MB Looks Installed on machine, so the Plugins are there.
    Just wanted to see if anyone has dealt with this issue or might have any insight to the problem.
    I can post the Crash info on the specific thread if that can help.
    Thanks!

    Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
    R

  • I am not able to use Magic Bullet Looks with the After Effects trial

    Jeff,
    I am having troubles with downloading a trial. I am currently trying to find ways to edit videos using Magic Bullet Looks. I have found many ways, but when I go to download the Magic Bullet looks, it says After Effects cs6. For some reason it does not install even though I have the trial version of After Effects. So when I open After Effects, and go to the effects tab, it does not show up. I have looked on tutorials and many other ways.
    I also tried downloading the trial of After Effects at, http://prodesigntools.com/adobe-cs6-direct-download-links.htmlrfer
    Please Help,
    - jhsurfer

    If you're having difficulty installing or using Magic Bullet Looks, then I recommend asking the folks who make that plug-in, Red Giant:
    http://www.redgiant.com/products/all/magic-bullet-looks/

  • Crash upon return to FCP from Magic Bullet Looks

    Problem:
    MacPro 2.8Ghz, Early 2008, Nvida 8800GT GFX Card, FCS3, Decklink HD 10.6.4, Magic Bullet Looks 3, ProRes 1080 footage cut on ProRes 720 timeline.
    After returning from placing a grade on a clip in Looks, at the first click of the mouse inside FCP, the whole app crashes. Digital Rebellion - Crash Analyzer says is a Graphics Cards/ Driver issue and the crash is related to quick draw!.
    Everything on the System is updated.
    I don't believe that the GFX card needs to be updated and work on other suites using older hardware and don't have this issue.
    Anyone know anything more as to why this would be happening?

    Hi -
    Check this out - it restored functionality for me (don't know if this is the latest info, this is the link I had on file):
    http://www.redgiantsoftware.com/support/faq/product-specific/magic-bullet-looks/ 175/
    MtD

  • Photoshop cc problem with Magic Bullet Looks 2 !

    I am having trouble with using Red Giants' Magic Bullet photolooks 2 plugin  with PS CS6 (32&64).
    The standalone program works fine on its own but fails to launch properly from PS's filter menu. It tries to launch the app but then reports an error Sorry, an error occurred (12288), Corrupted memory profile, then an error Can't open dest profile. These errors can't be cleared except by going into task manager to kill the app. Photoshop reports the error as LooksBuilder failed to launch. Please ensure the application has not been renamed or moved from the install location and then  Could not complete the Photolooks command because of a problem with the filter module interface.
    Please Help
    i heard that the fix is by the color management , but i dont know how

    Disable those plugins until you can get an update from the plugin manufacturer.  Just change the name of the folder they're in to start with ~ and relaunch Photoshop.
    Also, the magic bullet looks have nothing to do with color management.

Maybe you are looking for

  • Crystal Report Error under vs 2005

    Hi, I shifted my machine from windows 32 to windows 64 bit. I install VS 2005 & Crystal Reportfor .Net framework (x86) now when am running my application which is developed in 32 bit os, it gives me error. "NewGenerator' no suitable method found to o

  • How to upload the Excel sheet into SAP

    Hello Gurus, Please let me know the steps how to upload excel sheet file in sap at one time.Suppose i have entered the employee details and their caste .This detail has been maintained in Excel.I want to know the total steps how to upload this total

  • Infinity Speed Drops

    Hi all. I sincerely wish that I had taken the time to read up on BT before moving my broadband services over. Unfortunately in my area the choice is rather limited and the offer of Infinity was, in principle, too good to be true. I had my service ins

  • Getting iTunes Back after swapping computers

    My computer died, and I can't figure out how to get my iTunes back on my new computer Can anyone help?

  • OSMF Caption Support

    Hi all, With the recent US legislation requiring online broadcasts to support closed captioning (Fall 2012 is the first deadline), I was wondering what the current and future state of captioning in OSMF. My understanding of the current state is that