Does Mail Trigger for Supplier in CLM .

Hi All ,
My question is regarding sell side part in CLM.
As there is no sell side part in CLM but as contract creation happen between Supplier and buyer? then Mail trigger at application level communicated to supplier?  Or  some supplier can be added in Collaborator so that they can get mail?
Please suggest me for my above understanding as soon as possible
Thanks
Peeyush Ranjan

Hello Peeyush,
In CLM we have sell side. -- vendor login
In order to trigger the mails to the suppliers regarding contract creation, new version for contract document contract supplier users should be added as contacts to the respective supplier.
Also enable the notifications at contract document types.
Note:- The phase of the contract document should be external in order to trigger the mails to supplier contacts
Regards,
Vennela

Similar Messages

  • Urgent!! How does mailing address for contacts work in CRM 5.2?

    In creating a new contact, one has the choice of selecting from one of the addresses entered for the Account the contact is associated with.
    Is there a way to enter a mailing address for just the contact independent of the addresses entered for the account or at least designate one for the mailing address for the contact. When editing the contact, it shows a section to enter home address but not mailing address.
    Maximum points for helpful answer!!

    Originally Posted by vBDKv
    It's pretty much like CMSS-3D, just better.
    CMMS-3D works like this http://forums.creative.com/showthrea...l=1#post521522
    CMSS leaves SBX 3D positioning for dead.

  • Dynamic Mail trigger for IT0019 Tasks Reminder.

    Hi PA Experts:
    I have a requirement to trigger a dynamic mail (for the Tasks in IT0019) to the Personnel Administrator to remind the Tasks.
    ex: A mail to be triggered by the system to remind the Administrator as and when the date arrives to followup with the various tasks (such as Probation Confirmation, Appraisal Due, Contract Expiry etc..). Here the mail to be sent to the SAP Inbox and Outlook as well.
    Pls suggest how to configure.
    Thanks and regards,
    Srikanth Reddy

    Hi Srikanth/Shiva/Hems,
    hope u r doing good.
    Configuring Mail Triggering in M0001 Feature is pretty straight forward.
    T001P-MOLGA='10'
    T0000-MASSN='10'
    M0001
    For this to work, Maintain
    Feature M0001
    SBWP - here u ll configure mail addressess , clik the distribution list button.
    RCNEW - here u ll give the value which u configured in SBWP Tcode(M- for mail, V- Distribution list).
    hope u try and it works, pls do update.
    Regards
    Rohit.S

  • Mail trigger for Task assigned in collaboration room

    Hi,
    When a task is assigned to an user, mail does not get triggered to the assignee, but triggers to only tracker.
    Is it possible to trigger mail for the assignee to?. Also is there any way to set alert mail for the tasks both for assignee and tracker?
    Regards,
    Sasikala

    Hi,
    I have similar requirement like this,
    In Restricted Room, User A request membership, After this owner get the notification mail for that request.
    is possible to send notification to User A by mail or in UWL notification?. how can we achieve this?
    Request Membership for Restricted Room is calling the below mentioned class,
    Name : RoomRequestMembershipCommand
    Value : com.sap.netweaver.coll.roomui.api.uicommands.UIRequestMembershipCommand (Class)
    From this class, i didnt understand how the mail (where the action is occuring) sends to the Room Owner.
    Room Owner getting the member request notification through mail, but Owner have to get the notification in Collaboration My tasks instead of getting notification through mail.  how can i achieve this?
    Thanks and Regards,
    Senthil

  • E-mail trigger for BP creation

    Hi
    We have a requirement where a e-mail needs to be triggered once a BP is created.
    Please provide me some inputs as to how to achieve the same
    regards
    Subhasis

    Hi Subhasis,
    The best way to do it, is to start a workflow that start when the standard event 'CREATED' of the object BUS100605 is triggered.
    to do it
    1 - go to transaction SWO1 create a sub type for the object BUS100605 and add a a method "SendMail".
    2- Go to transaction PFTC and create a worflow that start after the event 'created' of the BUS100605.
    3- In the workflow creae a tak that call you "SendMail" method.
    I Hope that this basic explanation will help you.
    regadrs
    Jacques

  • Why does Mail delay for up to 30 seconds before sending messages?

    This did not  happen in Mountain Lion and it's one of a number of annoying new things I'm encountering in Mavericks.
    Every time I compose an email and hit "Send" the mail goes into the outbox and sits there for a while - sometimes a long while (up to 10 seconds or more) before it gets sent.
    Not only that: I then get a message in "Mail activity" that a much larger number of messages is being sent. Even if I'm only sending one, "Mail activity" tells me that 5, 6, 10  messages are being sent.
    Is anyone else wresting with these really annoying issues in Mail?

    Double-checking all settings is good. Along the way, one thing to try:
    Have a look at your SMTP server settings to see if the port is set to "default" or "custom".  If it is "default" try switching to custom using one of the numbers listed under "default". That fixed it for me on one of my accounts.
    (To do all this:  Mail, Preferences, Accounts, Outgoing Mail Server, Edit SMTP server list, Advanced.)
    charlie

  • Why does Mail 'check for new messages' despite it being set to 'manual'?

    I want to only receive new email either once per hour or better still manually (once or twice during the day at a time chosen by me). That way I won't be bombarded with emails all day and can get on with my work.
    So, I set the 'check for new messages' to 'manually'.
    Nevertheless I get email coming in frequently. Possibly every time I send an email, it also checks for new incoming mail (I'm not sure but that's my hunch).
    How can I stop Mail from pulling in my new incoming email?
    Any answers to this? If I can't figure this out or it's not possible in Apple Mail, it might be time to switch (but I don't want to!)
    Thanks in advance
    Dan

    Thanks Linc, works great.
    There should be a hint for this in Mail's preferences, underneath the 'check for messages' option

  • While running F110 mail trigger should happen at the time of payment Run

    Hi Experts,
    I have configured FBZP and automatic mail trigger for Payment Advice also.  Now while running F110 then at the time of Proposal Run the mail is getting triggered. But since its proposal it can be edited also. So I need the mail should trigger at the time of Payment Run. Plz suggest how to achieve this.
    Thanks in Advance,
    Arabinda

    Check this note: 836169
    may be helpful with the config and setup, its a consulting note....

  • Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    Hiya, I've got a weird problem with my iPhone4. On the 'home page' of my iPhone the mail symbol tells me there's a new mail waiting for me. However, there's no new mail to be found. Does anyone know what the problem is? Thanks

    This response is a little late as I just read about your problem. I have a 2012 Dodge Charger and a 2012 Chrysler Town and Country and both worked flawlessly with the iPhone 5s my wife and I had. However, we just upgraded to the iPhone 6 and Uconnect will receive calls but you cannot answer them. You can callout successfully, however. the annoyance being the inability to answer incoming calls in the HandsFree mode.

  • PO/ Invoice created for supplier does not exist for particular company code

    Hi Gurus,
    We have a case where PO created w.r.t supplier X does not exist for any company code A. Also Invoice is generated.
    As per my analysis:
    1. Purchasing organization is assigned to the particular plant and Plant does assigned to company code. This purchasing organization does not assigned to any company code and kind of centrally allowed to any company code based on above link.
    2. Supplier X does exist for the purchasing organization. And in Partner function-For PI (Invoice presented) partner function, it is defined for another supplier Y. This Y supplier does exist for company code A and might be the reason, it is allowing creating PO and Invoice.
    Please correct me, if I am wrong or If there will be any other reason for the same. Just for your information, there is no Info record exist for this PO as it is created for service without any material number.
    Thanks for your response.
    Best regards,
    Karun Kumar

    You can create vendor only with reference to purchase organization and withoout company code.
    for this vendor, you can create PO and MIGO and system will allow but when you try to post the invoice system will prompt you to enter different invoice party. if you dont enter different invoice party, system will throw an error message "vendor is not defined in XXXX.
    So in your case, your analysis is correct.

  • I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto.  My iCloud email works ok otherwise.  I have check all mail settings for ID and password.

    I get "mail server does not recognize your Apple ID and password" when I try to share a picture via email in iPhoto.  My iCloud email works ok otherwise.  I have checked all mail settings for ID and password.

    In the iPhoto preferences ==> accounts delete the account and re-enter it - sometimes that resolves this
    Or IMHO the best long term solution is to set Apple Mail as the iPhoto e-mail client in the iPhoto preferences and use it - it has a number of advatages and has fewer problems
    LN

  • Does the SCC-DI01 can be set as a trigger for strain gage measuremen​t?

    I used the SCC-SG01 to measure the strain. I need a trigger to activate the gages to get the data when the test happen. Can I use the SCC-DI01 as a trigger for gages for my test? If I can, how I can do it?   

    Hello hopezx,
    The 2345 is a fairly passive device that does not actually have a lot built into it other than the signal conditioning. So the actual thing that we need to look at is the DAQ card that you have attached to the 2345.  What you need to check on is the product page on ni.com to see if your device support digital triggering.  If it does, then you can use a digital trigger for your task just like any other.  
    Please post back if you have any other questions or would like some more details.  If you do post back, please make sure to let us know what other hardware you are using.  
    ColeR
    Field Engineer

  • Does Mail need to be open for emails to appear in Notifications?

    I love the notifications feature in Mavericks, and in particular, I like that incoming emails pop up like in iOS. My question is, does Mail app need to be open for emails to appear in Notifications?

    On the Mac, Mail needs to be open to be notified of incoming Mail. I tend  to leave the app open all the time, just collapsed into the Dock, getting notified by Notification Centre as emails arrive and leaving a red badge on the Mail icon in the Dock if Mail arrived whilst I was away.

  • Why does mail want pw for icloud each time it opens

    why does mail want pw for icloud each time it opens?

    System Preferences>iCloud
    Uncheck Mail from the apps that sync with iCloud.
    It'll stop.

  • HT5627 Does Mail (Mavericks) have any limitations for size, numer of mailboxes, folders, messages, etc.?

    Does Mail (Mavericks) have any limitations for size, numer of mailboxes, folders, messages, etc. ?

    Ah, so you're not considering running OS X Server here, you're running OS X client and asking about the mail client — looks like both the Apple bot that suggested that support article and I were confused.
    Mavericks Mail.app does have a few flakies that I've noticed but does work.  If Mail.app gets confused, restart it and see if it's less confused.  If the accounts get confused and start tossing the password prompt, remove and re-add the accounts.  When re-adding the accounts, don't use the Internet Accounts path, use the Mail > Preferences path.
    Do make a backup or two before the Mavericks upgrade, and most definitely configure and use Time Machine or some other backup tools after the upgrade.
    If you do decide to go to server (which is where I'd thought this question was originally headed), then you can download everything to your own local server — that'll take some add-on software to pull the mail from your ISP, or a set of mail-forwarding rules to push the mail, and some command-line tweaks to relay the mail out (as you're probably on a DHCP dynamic residential IP address), but that'll work, too.

Maybe you are looking for