Does Maintenance Wizard allow to register RAC node and if yes, then how?
Maintenance Wizard is not allowing to register additional nodes for RAC. This cause manual run for other nodes. Is there any way we can setup multiple nodes?
Example, we have two CM/Admin nodes and RAC database. We are using Maintenance Wizard version 2.19.
Thanks
Edit the following script to sort out bug 11699526.
$EOF_HOME/scripts/COMMON/eof1122e.sh
Line 131 reads "(CONNECT_DATA=(SID=${DB_SID})" change it to read "(CONNECT_DATA=(SERVICE_NAME=${DB_SID})".
Enter the database service name when configuring the DB nodes.
You will still need to do the OS related operations manually on node 2.
Robert
Similar Messages
-
Hi all,
Need help to setup High Availability at my workplace, can somebody please tell that Weblogic12c support Application Failover ?
If yes, then how does Weblogic12c detect an application failure (OutOfMemoryException)?
WebLogic Server - General@Hi there user,
you can achieve HA in different levels:
1. On a single machine - here you need to set up nodemanager. When started by nodemanager, any server failures will be detected and the nodemanager will try to restart it. OOME is an exception thrown by the JVM and the server state should go FAILED at some point then the NM will try to restart it. Nodemanager is the simplest HA solution you can and must implement for production environment;
2. On redundant machine - you can configure WLS clustering, but you will need more complex environment, i.e. you will need a load balancer in front of the cluster to reverse proxy the requests. This scenario is can also use nodemanager to control the WLS instances on each machine
3. Cluster with server/service migration - the most complex scenario where in cases of machine failure the WLS cluster can "relocate" resources (services and whole severs) to spare machines.
In your case OOME should cause the JVM respectively WLS to be unresponsive, hence the nodemanager will detect this at some point and will try to restart the WLS.
Hope this helps,
A. -
Hi,
I have a 10.2.0.3 RAC running on RHELv4. What is a node and disk ping in terms of Oracle RAC? I assume the node ping refers to the hangcheck-timer, or is this wrong? The only disk ping that I recall was in 9i but not heard of this in 10g unless it's something else.
Also, where would I configure these parameters?
Thanks.Try ML Note 294430.1: "CSS Timeout Computation in RAC 10g (10g Release 1 and 10g Release 2)" for example.
Thanks. -
Query on setting of ORACLE_HOME in RAC node and more errors
i m following oracle docs for install Oracle 10g R2 RAC on RHEL 5.
i am able to get through most of the part but one minor thing is still bugging me.
Enter commands similar to the following to set the ORACLE_BASE and
ORACLE_HOME environment variable in preparation for the Oracle Clusterware
installation:
■ Bourne, Bash, or Korn shell:
$ ORACLE_BASE=/u01/app/oracle
$ ORACLE_HOME=/u01/crs/oracle/product/10/app
$ export ORACLE_BASE
$ export ORACLE_HOMEthe above extract from the docs (B14203-09) says ORACLE_HOME should be set to the dir where clusterware is installed.
my query is do we change this ORACLE_HOME to '/u01/app/oracle/product/10/db_1' when we install the oracle database after we finish installing the clusterware.
Further, permissions for the /u01/crs directory should be root:oinstall and 775 during the installation of the clusterware and changed to 644 after installation of clusterware. is that correct? is it 644 or 640? does it need read access for every one?
Edited by: iinfi on Jul 5, 2009 1:42 AM
Edited by: iinfi on Jul 5, 2009 12:20 PMi initially thought not setting the oracle_home to the crs directory was the cause of the error message
[root@node1 ~]# /ora/app/oracle/product/10.2.0/crs/root.sh
WARNING: directory '/ora/app/oracle/product/10.2.0' is not owned by root
WARNING: directory '/ora/app/oracle/product' is not owned by root
WARNING: directory '/ora/app/oracle' is not owned by root
WARNING: directory '/ora/app' is not owned by root
WARNING: directory '/ora' is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Failed to upgrade Oracle Cluster Registry configurationthe crs directory is owned by root:oinstall with permissions set to 775. CRS and voting disks are raw devices set on my RHEL 5.3 with openfiler as storage (iSCSI targets)
[root@node1 node1]# cat /ora/app/oracle/product/10.2.0/crs/log/node1/client/ocrconfig_9680.log
Oracle Database 10g CRS Release 10.2.0.1.0 Production Copyright 1996, 2005 Oracle. All rights reserved.
2009-07-05 02:03:01.250: [ OCRCONF][14166224]ocrconfig starts...
2009-07-05 02:03:01.253: [ OCRCONF][14166224]Upgrading OCR data
2009-07-05 02:03:01.300: [ OCRCONF][14166224]OCR already in current version.
2009-07-05 02:03:01.363: [ OCRCONF][14166224]Failed to call clsssinit (21)
2009-07-05 02:03:01.363: [ OCRCONF][14166224]Failed to make a backup copy of OCR
2009-07-05 02:03:01.363: [ OCRCONF][14166224]Exiting [status=failed]...can someone please throw some light as to what i am missing here.
thanks -
Is it possible to add a JComponent as a JTree node? If yes then please help
I am writing a java program in which I want to make my tree nodes editable by adding textfields, comboboxes, radiobuttons as nodes to the tree. So if anyone has any soluition please help!!!
"Search Forums"
has a wealth of information, and should be your first action when seeking a solution
here's the results of searching, keywords: JTree JTextField
http://onesearch.sun.com/search/onesearch/index.jsp?qt=Jtree+JTextfield&subCat=&site=dev&dftab=&chooseCat=javaall&col=developer-forums
plenty of the hits will have sample code you should be able to modify for your own needs -
The phone is not stolen but it does not work out side of the house
if it doesnt match that means your iPhone is not provisioned for the carrier you are trying to use. Your iPhone would need to be unlocked in order to use on other carriers. You will need to contact your carrier to see if this iPhone is unlocked py providing them the IMEI. If the iPhone is not unlocked you will need to contact the carrier that the iPhone is locked to to see if they will unlock the device to use on another carrier.
-
When I delete mail items on my Mac Pro it does not delete the same deleted items on my IPAD and I phone. I have to delete all items from each device. there must be a way to coordinate all three so that I can remove items on only one device and ICloud should coordinate them. Please help!
With iCloud emails (those of type me.com, mac.com or icloud.com), they should be deleted on all devices and computers when deleted on one - this assumes all devices/computers are logged into icloud using the same account.
For other email accounts that are not part of icloud, like Yahoo and personal domains, this will not work if the account is a POP account. In that case you must delete from all devices if the account is set up to not delete from the server.
It sounds like your account is a POP account. -
My iPhone 4s shuts down at least once a day, usually after I used it or when I'm not using it at all. It will not turn back on unless I reset it (by pressing home/power buttons) and when it turns back on, it runs like nothing happened. I have tried everything I can think of, update iPhone software, iTunes software, troubleshoot on Apple's Support page and reading other user's issues but I haven't seen anything similar. I erased and restore factory settings several times, made different backup attempts and even restored from recovery mode with iTunes. Everything goes great, no error message or anything unusual, until phone is off again, very frustrating. It doesn't seem to have a pattern to it, it happened when no apps were running as well as when a few apps were. The only thing I can think of is I haven't seen this happening when charger cable is plugged it. I don't really care about apps and content on the phone, but my contacts and voicemails are the only reason why I absolutely have to restore from backup, even after setting up a new phone, from iTunes. Other than that phone is brand new, battery is also great, nothing wrong with it (apparently).
I would like to know if somebody knows what this could be, and any ideas on how to fix it. Thank you.Start with this comprehensive troubleshooting article:
https://discussions.apple.com/docs/DOC-3521
Look at this one for possible solutions:
https://discussions.apple.com/docs/DOC-3353
Ciao. -
Rac node failed how do you bring it back up?
Example: If there are 3 RAC nodes and one becomes unavailable/fails, how do you bring it back up?
There are typically two basic reasons why a RAC node will go down.
A cluster issue, causing the node to be evicted. This usually means the node lost access to the cluster storage (e.g. no access to voting disks), or lost access to the Interconnect.
An o/s issue causing the node to fail. E.g. a kernel panic due to a page swap and memory not syncing, or a soft CPU lockup, etc.
You need to determine why it went down, and determine what is needed to enable it to join the successfully cluster again. -
My itunes does not want to work downloaded 5 times and still comes up with an error
my itunes does not want to work downloaded 5 times and still comes up how can I fix this ?
I have the same &*@#($@% problem....and I'm ******! I've tried everything. What error message are you getting? I am getting "Itunes folder could not be found or created. The default location is in my music folder". I've downloaded it a million times. It worked at first by going to a specific song and clicking it and/or plugging in my IPOD, but that stopped also.
-
What does "Remote EOF_HOME" in Maintenance Wizard Refer To
We are trying to set up Maintenance Wizard 2.18 to do an 11.5.10.2 to R12.1 migration and cannot figure out what the value of "Remote EOF_HOME" should be or where it gets created..
I want to know exactly where that directory will be created. What it is used for would also be nice to know so I can make sure it has enought space.
Thanks in advance!Samuel,
Also note that there is a more detailed description of every one of the Node Attributes available right in the Define Nodes attribute screen. Just to the right of the field itself, there is a small "i" icon inside of a bubble. Clicking on that icon will show you more information to assist you in populating the attribute with the correct value.
-Vikki
Product Manager for the Maintenance Wizard -
Hi, I wish to buy an Adobe Master Collection CS3 (Corporate Edition) from someone in the US and I hope to use it in the UK. Does anyone know if this can be done without any problems, also does Adobe still allow people to register the CS3 Corporate Edition? any help would be greatly appreciated
The flaw is here:
corporate edition
...which essentially means it's most likely a volume license and thus not transferable in the first place. The rest is as Steve said - buying software on eBay is risky even on the best of days.
Mylenium -
Hello everyone,
I have met an error,that is our RAC node auto restart with below messages.
#/u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/alert_odsdb1.log
Fri Jun 07 12:23:42 2013
Thread 1 cannot allocate new log, sequence 58363
Checkpoint not complete
Current log# 2 seq# 58362 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58362 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Fri Jun 07 12:23:42 2013
NOTE: ASMB terminating
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
Errors in file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc:
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
ASMB (ospid: 32641): terminating the instance due to error 15064
Fri Jun 07 12:23:44 2013
ORA-1092 : opitsk aborting process
Fri Jun 07 12:23:46 2013
ORA-1092 : opitsk aborting process
Instance terminated by ASMB, pid = 32641
Fri Jun 07 12:25:02 2013
Starting ORACLE instance (normal)
Fri Jun 07 12:25:23 2013
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Public Interface 'eth0:1' configured from GPnP for use as a public interface.
[name='eth0:1', type=1, ip=135.33.2.13, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/oracle/product/11.2.0/dbhome_2/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options.
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Using parameter settings in server-side pfile /u01/app/oracle/product/11.2.0/dbhome_2/dbs/initodsdb1.ora
System parameters with non-default values:
processes = 4500
sessions = 6784
event = ""
spfile = "+DATA/odsdb/spfileodsdb.ora"
nls_language = "SIMPLIFIED CHINESE"
nls_territory = "CHINA"
memory_target = 170G
control_files = "+DATA/odsdb/controlfile/current.262.812288837"
control_files = "+DATA/odsdb/controlfile/current.261.812288837"
db_block_size = 8192
compatible = "11.2.0.0.0"
db_files = 4096
cluster_database = TRUE
db_create_file_dest = "+DATA"
db_recovery_file_dest = ""
db_recovery_file_dest_size= 38820M
thread = 1
undo_tablespace = "UNDOTBS1"
instance_number = 1
remote_login_passwordfile= "EXCLUSIVE"
db_domain = ""
dispatchers = "(PROTOCOL=TCP) (SERVICE=odsdbXDB)"
remote_listener = "odsdb-cluster-scan:1521"
job_queue_processes = 1000
audit_file_dest = "/u01/app/oracle/admin/odsdb/adump"
audit_trail = "DB"
db_name = "odsdb"
open_cursors = 300
diagnostic_dest = "/u01/app/oracle"
Cluster communication is configured to use the following interface(s) for this instance
169.254.37.103
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
Fri Jun 07 12:25:33 2013
PMON started with pid=2, OS id=22959
Fri Jun 07 12:25:33 2013
PSP0 started with pid=3, OS id=22962
Fri Jun 07 12:25:34 2013
VKTM started with pid=4, OS id=22971 at elevated priority
VKTM running at (1)millisec precision with DBRM quantum (100)ms
Fri Jun 07 12:25:34 2013
GEN0 started with pid=5, OS id=22977
Fri Jun 07 12:25:34 2013
DIAG started with pid=6, OS id=22979
Fri Jun 07 12:25:35 2013
DBRM started with pid=7, OS id=22981
Fri Jun 07 12:25:35 2013
PING started with pid=8, OS id=22983
Fri Jun 07 12:25:35 2013
ACMS started with pid=9, OS id=22985
Fri Jun 07 12:25:35 2013
DIA0 started with pid=10, OS id=22987
Fri Jun 07 12:25:35 2013
LMON started with pid=11, OS id=22989
Fri Jun 07 12:25:35 2013
LMD0 started with pid=12, OS id=22991
* Load Monitor used for high load check
* New Low - High Load Threshold Range = [61440 - 81920]
Fri Jun 07 12:25:35 2013
LMS0 started with pid=13, OS id=22994 at elevated priority
Fri Jun 07 12:25:35 2013
LMS1 started with pid=14, OS id=22998 at elevated priority
Fri Jun 07 12:25:35 2013
LMS2 started with pid=15, OS id=23002 at elevated priority
Fri Jun 07 12:25:35 2013
LMS3 started with pid=16, OS id=23006 at elevated priority
Fri Jun 07 12:25:35 2013
RMS0 started with pid=17, OS id=23010
Fri Jun 07 12:25:35 2013
LMHB started with pid=18, OS id=23013
Fri Jun 07 12:25:35 2013
MMAN started with pid=19, OS id=23015
Fri Jun 07 12:25:35 2013
DBW0 started with pid=20, OS id=23017
Fri Jun 07 12:25:35 2013
DBW1 started with pid=21, OS id=23019
Fri Jun 07 12:25:35 2013
DBW2 started with pid=22, OS id=23022
Fri Jun 07 12:25:35 2013
DBW3 started with pid=23, OS id=23024
Fri Jun 07 12:25:35 2013
DBW4 started with pid=24, OS id=23026
Fri Jun 07 12:25:35 2013
DBW5 started with pid=25, OS id=23028
Fri Jun 07 12:25:35 2013
DBW6 started with pid=26, OS id=23031
Fri Jun 07 12:25:35 2013
DBW7 started with pid=27, OS id=23033
Fri Jun 07 12:25:35 2013
LGWR started with pid=28, OS id=23035
Fri Jun 07 12:25:35 2013
CKPT started with pid=29, OS id=23037
Fri Jun 07 12:25:35 2013
SMON started with pid=30, OS id=23039
Fri Jun 07 12:25:35 2013
RECO started with pid=31, OS id=23041
Fri Jun 07 12:25:35 2013
RBAL started with pid=32, OS id=23043
Fri Jun 07 12:25:35 2013
ASMB started with pid=33, OS id=23045
Fri Jun 07 12:25:35 2013
MMON started with pid=34, OS id=23048
Fri Jun 07 12:25:35 2013
MMNL started with pid=35, OS id=23052
Fri Jun 07 12:25:35 2013
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
NOTE: initiating MARK startup
starting up 1 shared server(s) ...
Starting background process MARK
Fri Jun 07 12:25:35 2013
MARK started with pid=37, OS id=23056
NOTE: MARK has subscribed
lmon registered with NM - instance number 1 (internal mem no 0)
Reconfiguration started (old inc 0, new inc 119)
List of instances:
1 2 (myinst: 1)
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 valid according to instance 2
* domain 0 valid = 1 according to instance 2
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration started (old inc 119, new inc 121)
List of instances:
1 2 (myinst: 1)
Nested reconfiguration detected.
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
LMS 0: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 3: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 2: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
LMS 1: 0 GCS shadows cancelled, 0 closed, 0 Xw survived
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Fri Jun 07 12:25:45 2013
Submitted all GCS remote-cache requests
Fri Jun 07 12:26:08 2013
Fix write in gcs resources
Reconfiguration complete
Fri Jun 07 12:26:10 2013
LCK0 started with pid=40, OS id=23632
Fri Jun 07 12:26:10 2013
Starting background process RSMN
Fri Jun 07 12:26:10 2013
RSMN started with pid=41, OS id=23646
ORACLE_BASE not set in environment. It is recommended
that ORACLE_BASE be set in the environment
Reusing ORACLE_BASE from an earlier startup = /u01/app/oracle
Fri Jun 07 12:26:11 2013
ALTER SYSTEM SET local_listener=' (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=135.33.2.13)(PORT=1521))))' SCOPE=MEMORY SID='odsdb1';
ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:11 2013
NOTE: Loaded library: System
Fri Jun 07 12:26:11 2013
SUCCESS: diskgroup DATA was mounted
Fri Jun 07 12:26:11 2013
NOTE: dependency between database odsdb and diskgroup resource ora.DATA.dg is established
Fri Jun 07 12:26:16 2013
Successful mount of redo thread 1, with mount id 3452000551
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Lost write protection disabled
Completed: ALTER DATABASE MOUNT /* db agent *//* {1:9971:2} */
ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Picked broadcast on commit scheme to generate SCNs
Thread 1 advanced to log sequence 58364 (thread open)
Thread 1 opened at log sequence 58364
Current log# 2 seq# 58364 mem# 0: +DATA/odsdb/onlinelog/group_2.265.812288839
Current log# 2 seq# 58364 mem# 1: +DATA/odsdb/onlinelog/group_2.266.812288839
Successful open of redo thread 1
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Fri Jun 07 12:26:21 2013
SMON: enabling cache recovery
Fri Jun 07 12:26:23 2013
minact-scn: Inst 1 is a slave inc#:121 mmon proc-id:23048 status:0x2
minact-scn status: grec-scn:0x0000.00000000 gmin-scn:0x0000.00000000 gcalc-scn:0x0000.00000000
Fri Jun 07 12:26:34 2013
[23651] Successfully onlined Undo Tablespace 2.
Undo initialization finished serial:0 start:2061372614 end:2061384964 diff:12350 (123 seconds)
Verifying file header compatibility for 11g tablespace encryption..
Verifying 11g file header compatibility for tablespace encryption completed
Fri Jun 07 12:26:34 2013
SMON: enabling tx recovery
Database Characterset is ZHS16GBK
No Resource Manager plan active
Starting background process GTX0
Fri Jun 07 12:26:35 2013
GTX0 started with pid=45, OS id=23931
Starting background process RCBG
Fri Jun 07 12:26:35 2013
RCBG started with pid=46, OS id=23933
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
Fri Jun 07 12:26:35 2013
QMNC started with pid=48, OS id=23940
Completed: ALTER DATABASE OPEN /* db agent *//* {1:9971:2} */
Fri Jun 07 12:26:38 2013
Starting background process CJQ0
Fri Jun 07 12:26:38 2013
CJQ0 started with pid=55, OS id=23977
Fri Jun 07 12:27:56 2013
Thread 1 advanced to log sequence 58365 (LGWR switch)
Current log# 1 seq# 58365 mem# 0: +DATA/odsdb/onlinelog/group_1.263.812288839
Current log# 1 seq# 58365 mem# 1: +DATA/odsdb/onlinelog/group_1.264.812288839
Fri Jun 07 12:28:18 2013
Starting background process SMCO
Fri Jun 07 12:28:18 2013
SMCO started with pid=70, OS id=25166
Fri Jun 07 12:29:01 2013
Thread 1 cannot allocate new log, sequence 58366
Trace file /u01/app/oracle/diag/rdbms/odsdb/odsdb1/trace/odsdb1_asmb_32641.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_2
System name: Linux
Node name: odsdb1
Release: 2.6.18-308.el5
Version: #1 SMP Fri Jan 27 17:17:51 EST 2012
Machine: x86_64
Instance name: odsdb1
Redo thread mounted by this instance: 0 <none>
Oracle process number: 33
Unix process pid: 32641, image: oracle@odsdb1 (ASMB)
*** 2013-05-14 15:37:08.705
*** SESSION ID:(3499.1) 2013-05-14 15:37:08.705
*** CLIENT ID:() 2013-05-14 15:37:08.705
*** SERVICE NAME:() 2013-05-14 15:37:08.705
*** MODULE NAME:() 2013-05-14 15:37:08.705
*** ACTION NAME:() 2013-05-14 15:37:08.705
NOTE: initiating MARK startup
*** 2013-05-14 15:37:16.835
instance health monitoring reports instance shutting down
*** 2013-06-07 12:23:42.700
NOTE: ASMB terminating
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
error 15064 detected in background process
ORA-15064: ? ASM ??????
ORA-03113: ?????????
?? ID:
?? ID: 2047 ???: 5
kjzduptcctx: Notifying DIAG for crash event
----- Abridged Call Stack Trace -----
ksedsts()+461<-kjzdssdmp()+267<-kjzduptcctx()+232<-kjzdicrshnfy()+53<-ksuitm()+1332<-ksbrdp()+3344<-opirip()+623<-opidrv()+603<-sou2o()+103<-opimai_real()+266<-ssthrdmain()+252<-main()+201<-__libc_start_main()+244<-_start()+36
----- End of Abridged Call Stack Trace -----
*** 2013-06-07 12:23:42.783
ASMB (ospid: 32641): terminating the instance due to error 15064
/u01/app/grid/diag/asm/+asm/+ASM1/trace/alert_+ASM1.log
NOTE: ASMB process exiting, either shutdown is in progress
NOTE: or foreground connected to ASMB was killed.
Fri Jun 07 12:23:42 2013
NOTE: client exited [14808]
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
Fri Jun 07 12:23:44 2013
Received an instance abort message from instance 2
Please check instance 2 alert and LMON trace files for detail.
LMD0 (ospid: 31201): terminating the instance due to error 481
Instance terminated by LMD0, pid = 31201
Fri Jun 07 12:24:30 2013
* instance_number obtained from CSS = 1, checking for the existence of node 0...
* node 0 does not exist. instance_number = 1
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Private Interface 'eth1:1' configured from GPnP for use as a private interconnect.
[name='eth1:1', type=1, ip=169.254.37.103, mac=00-26-55-eb-61-89, net=169.254.0.0/16, mask=255.255.0.0, use=haip:cluster_interconnect/62]
Public Interface 'eth0' configured from GPnP for use as a public interface.
[name='eth0', type=1, ip=135.33.2.8, mac=00-26-55-eb-61-88, net=135.33.2.0/27, mask=255.255.255.224, use=public/1]
Picked latch-free SCN scheme 3
Using LOG_ARCHIVE_DEST_1 parameter default value as /u01/app/11.2.0.2/grid/dbs/arch
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
[grid@odsdb1 cssd]$ file core.30481
core.30481: ELF 64-bit LSB core file AMD x86-64, version 1 (SYSV), SVR4-style, from 'ocssd.bin'
[grid@odsdb1 cssd]$ gdb
gdb gdbserver gdbtui
[grid@odsdb1 cssd]$ gdb ocssd.bin core.30481
GNU gdb (GDB) Red Hat Enterprise Linux (7.0.1-42.el5)
Copyright (C) 2009 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-redhat-linux-gnu".
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>...
Reading symbols from /u01/app/11.2.0.2/grid/bin/ocssd.bin...(no debugging symbols found)...done.
[New Thread 30486]
[New Thread 30530]
[New Thread 30526]
[New Thread 30525]
[New Thread 30523]
[New Thread 30522]
[New Thread 30521]
[New Thread 30520]
[New Thread 30519]
[New Thread 30504]
[New Thread 30503]
[New Thread 30495]
[New Thread 30485]
[New Thread 30484]
[New Thread 30483]
[New Thread 30481]
Reading symbols from /u01/app/11.2.0.2/grid/lib/libhasgen11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libhasgen11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocr11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocr11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrb11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrb11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libocrutl11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libocrutl11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libclntsh.so.11.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxn2.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxn2.so
Reading symbols from /lib64/libdl.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/libdl.so.2
Reading symbols from /lib64/libm.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libm.so.6
Reading symbols from /lib64/libpthread.so.0...(no debugging symbols found)...done.
[Thread debugging using libthread_db enabled]
Loaded symbols for /lib64/libpthread.so.0
Reading symbols from /lib64/libnsl.so.1...(no debugging symbols found)...done.
Loaded symbols for /lib64/libnsl.so.1
Reading symbols from /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libasmclntsh11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libcell11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libcell11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libskgxp11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libskgxp11.so
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnnz11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnnz11.so
Reading symbols from /lib64/libc.so.6...(no debugging symbols found)...done.
Loaded symbols for /lib64/libc.so.6
Reading symbols from /usr/lib64/libaio.so.1...(no debugging symbols found)...done.
Loaded symbols for /usr/lib64/libaio.so.1
Reading symbols from /lib64/ld-linux-x86-64.so.2...(no debugging symbols found)...done.
Loaded symbols for /lib64/ld-linux-x86-64.so.2
Reading symbols from /u01/app/11.2.0.2/grid/lib/libnque11.so...(no debugging symbols found)...done.
Loaded symbols for /u01/app/11.2.0.2/grid/lib/libnque11.so
Reading symbols from /opt/oracle/extapi/64/asm/orcl/1/libasm.so...(no debugging symbols found)...done.
Loaded symbols for /opt/oracle/extapi/64/asm/orcl/1/libasm.so
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7fff505fd000
Core was generated by `/u01/app/11.2.0.2/grid/bin/ocssd.bin '.
Program terminated with signal 6, Aborted.
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
(gdb) where
#0 0x000000369ea30265 in raise () from /lib64/libc.so.6
#1 0x000000369ea31d10 in abort () from /lib64/libc.so.6
#2 0x00002afc67f9aeda in scls_abort (flags=0) at scls.c:7088
#3 0x000000000040babd in clssscExit (thrd=0x10d325a0, status=clssscreasonSHUTNORM) at clsssc.c:2155
#4 0x0000000000446221 in clssgmClientShutdown (thrd=0x10d325a0, cmInfo=0x10b40090) at clssgmc.c:6415
#5 0x0000000000436707 in clssgmProcClientReqs (thrd=0x10d325a0, clctx=0x10b40630) at clssgmc.c:704
#6 0x0000000000436405 in clssgmclientlsnr (thrd=0x10d325a0) at clssgmc.c:644
#7 0x000000000040ac2f in clssscthrdmain (thrd=0x10d325a0) at clsssc.c:1716
#8 0x000000369fa0677d in start_thread () from /lib64/libpthread.so.0
#9 0x000000369ead49ad in clone () from /lib64/libc.so.6
(gdb)
2013-06-07 12:19:37.377: [ CSSD][1085888832]clssscSelect: cookie accept request 0x10b40630
2013-06-07 12:19:37.377: [ CSSD][1085888832]clssgmAllocProc: (0x2aaab0133ea0) allocated
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: properties of cmProc 0x2aaab0133ea0 - 1,2,3,4,5
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: Connect from con(0x6ae44fa) proc(0x2aaab0133ea0) pid(14139/14139) version 11:2:1:4, properties: 1,2,3,4,5
2013-06-07 12:19:37.379: [ CSSD][1085888832]clssgmClientConnectMsg: msg flags 0x0000
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.384: [ CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(1/0x2aaab010c5c0)
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmRegisterShared: grp DBODSDB, mbr 0, type 1
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmQueueShare: (0x2aaab0085790) target global grock DBODSDB member 0 type 1 queued from client (0x2aaab010c5c0), global grock DBODSDB, refcount 23
2013-06-07 12:19:37.385: [ CSSD][1085888832]clssgmRegisterShared: global grock DBODSDB member 0 share type 1, refcount 23
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssscSelect: cookie accept request 0x2aaab0133ea0
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssscevtypSHRCON: getting client with cmproc 0x2aaab0133ea0
2013-06-07 12:19:37.391: [ CSSD][1085888832]clssgmRegisterClient: proc(69/0x2aaab0133ea0), client(2/0x2aaab0061f10)
what is the problem
Edited by: 徐振富 on 2013-6-7 下午6:38
Edited by: 徐振富 on 2013-6-7 下午6:45is your ASM instance up?
If not, trying bring up ASM instance up just by itself and see if it throws any error?
Post status of crsctl status cluster -all -
We have our company's database on Oracle Real application clusters database consisting of two RAC nodes. We would like to perform some hardware upgrades on both the RAC nodes. Could anyone please tell if it is OK to shutdown one instance at a time and remove all the network/interconnect cables from it and at the same time the other RAC node keeps working. After one node is upgraded and all the network/interconnect cables are connected back to it, will everything be just OK like before or are there are certain things to be cautious about ?
Thanks in advanceI think you got to do a clean shutdown so that it does not require any instance recovery when you re-open the database
SQL>SHUTDOWN TRANSACTIONAL
would allow all the current transactions to complete then shutdown the db -
How does Dynamic Quorum work for a two Node DAG
Hi All,
I have a two node DAG with a FS witness server. One of the node is 'down' (I have kept it like that), cluster has quorum and all services are online.
What I'm trying to understand is if a node's State=Down, isn't the Dynamic Quorum Group Manager suppose to trigger and set the DynamicWeight to '0' for that server.
In my case its not doing so, please let me know if this the way it is, or something is not quite right and I need to fix it.
Troubleshooting info below:
PS C:\Windows\system32> Get-ClusterNode | ft name, dynamicweight, state, nodeweight,id -AutoSize
Name DynamicWeight State NodeWeight Id
exch1 1 Down 1 1
exch2 1 Up 1 2
PS C:\Windows\system32> (Get-Cluster).WitnessDynamicWeight
1
PS C:\Windows\system32> Get-ClusterResource
Name State OwnerGroup ResourceType
Cluster IP Address Online Cluster Group IP Address
Cluster Name Online Cluster Group Network Name
File Share Witness (\\fs1... Online Cluster Group File Share Witness
(Validation test)
Validate Quorum Configuration
Description: Validate
that the current quorum configuration is optimal for the cluster.
Validating cluster quorum settings.
Witness Type: File Share Witness
Witness Resource: \\fs1.contoso.com\dag1.contoso.com
Cluster managed voting: Enabled
Voter Name
State
Assigned Vote
Current Vote
File Share Witness (\\fs1.contoso.com\dag1.contoso.com) (\\fs1.contoso.com\dag1.contoso.com)
Online
1
1
exch1
Down
1
1
exch2
Up
1
1
This quorum model will be able to sustain failures of 1 node(s) if the file share witness remains available
and 0 node(s) when the file share witness goes offline or fails.
This quorum configuration can be changed using the Configure Cluster Quorum wizard. This wizard can be started from the Failover
Cluster Manager console by selecting the cluster name in the left hand pane, then in the right "actions" pane selecting "More Actions..." and then selecting "Configure Cluster Quorum Settings...".
When all servers were up
node/2+1 = 2/2+1=2 required for quorum and we have 3 votes
When 1 server gone 1/2+1=1 quorum should recalculate to this. But its still considering 3 votes out of 1down server+1up server+1witness. Ideally I should be able to loose the witness too aftersome time and still maintain quorum(unlike what
the validation test is saying).
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.Hi Simon,
Thanks for your response.
I have done some study, testing and what I figured out is this.
Split brain syndrome is prevented by always requiring a majority of the DAG members (and in the case of DAGs with an even number of member, the DAG witness server) to be available and interacting for the DAG to be operational.
All DAGs with an even number of members must use a witness server.
Hence a 3 node cluster behaves differently than a 2 node. Exchange 2013 DAG kind of forces you to have a witness server always.
You can specify only a name for the DAG and leave the Witness server and
Witness directory fields empty. In this scenario, the task will search for a Client Access server that doesn't have the Mailbox server role installed. It will automatically create the default witness directory and share on that Client Access
server and configure the DAG to use that server as its witness server.
You can
'overridde the quorum configuration using Windows2012 Failover Cluster Manager', however using it to modify a DAG is not recommended.
If you open Failover Cluster Manager in Administrative Tools, you’ll find the Database Availability Group (DAG), cluster networks and so on. Don’t try to manage the DAG
using the Failover Cluster Manager, as this isn’t supported. The Exchange Management Console (EMC) or the Exchange Management Shell (EMS) are the only ways to manage the DAG.
Unless you’re doing a DC switchover and/or being assisted by Microsoft Support services (premier)
Now back to the point:
When we are left with 2 nodes and 1 witness server for Exchange HA. The Dynamic Quorum functionality kind of stops dealing with it. As 2nodes/2+1=2votes this means we need to have atleast 2 votes to have quorum.
So if we assume Dynamic Quorum triggers and removes 2 votes, 1 from Witness and 1 from nodeB.
Then the new formula we have is 1node/2+1=1vote which would mean this would allow us to loose both the witness and the nodeB. And nodeA will be the last man standing as in this
article.
However having this scenario in a two node cluster brings in the split-brain problem. As if there is a full disconnect of nodeA site and nodeB+Witness can talk, they form quorum , nodeB mounts the database. Which is undesirable.
Hence Dynamic Quorum keeps the votes to 3 in a 2nodes+1witness scenario contrary to what is expected and in turn keeps everything running fine till we have 2votes available, just like 2010,Windows2008 days.
Regards,
Satyajit
Please “Vote As Helpful”
if you find my contribution useful or “Mark As Answer” if it does answer your question. That will encourage me - and others - to take time out to help you.
Maybe you are looking for
-
Bought Premier Elements 13 yesterday. EVERY time I try to open a set of clips with Editor, I am told I have to sign into my Adobe first. I do this and wait for several minutes for the password dialogue box to open, enter my password. then wait and wa
-
Ora-20001 when creating a form on table with report (bug?)
Having some trouble creating a "Form on table with report". 1) I pick my table 2) take most of the defaults on the page where you pick the report type (interactive) and the page number (I changed it to 950). next-> 3) Do not use tabs. Next-> 4) Selec
-
HT5313 it seems the comupter is frozen during the update of OS X Lion TO v10.7.5
it seems the comupter is frozen during the update of OS X Lion TO v10.7
-
Steps for creating T.code for SAP Query
Hi Friends, I have developed and SAP Query through SQ01, i want to assign an T.code for that. What are the steps we have to do in SE93. Regards Kumar M
-
Updating ALV Screen after getting New Out put ( After BACK no old o/p )
Hi All I have got a ALV output with check box in it and a post button on application toolbar. If I am clicking a row and clicking post button I am able to get new alv output wherein I am removing clicked row from newer output screen. ( I am doing by