Does MARS 5.2 support FWSM software version 3.2?

Does MARS 5.2 support FWSM software version 3.2?

Hi Andrea,
No. MARS 5.2 only supports up to FWSM 3.1
And MARS 5.3 only supports FWSM 3.1.5
Please take a look for yourself at this document:
Supported and Interoperable Devices and Software for Cisco Security MARS Local Controller 4.2.x and 5.2.x
You can reach it via this link if you are logged into CCO:
http://www.cisco.com/en/US/partner/products/ps6241/products_device_support_table09186a0080467232.html
Hope this helps.
Best,
Paul

Similar Messages

  • Remote Desktop - The Remote Desktop administrator software does not match the installed client software version.

    Hi,
      I just upgraded to Mavricks and get this when I try to launch Remote Desktop:
    The Remote Desktop administrator software does not match the installed client software version.
    I tried removing the application and reinstalling it to no avail.  Any suggestions?
    Thanks.
    -David J. Eisen

    Hi coold88!
    I have an article for you that addresses your issue:
    Remote Desktop 3: How to install Remote Desktop Administrator software after the client software has been updated
    http://support.apple.com/kb/HT3596
    You will want to make sure you have the latest version of the software as well:
    About Apple Remote Desktop 3.7
    http://support.apple.com/kb/HT5896
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Does anybody knows advantaes inupdating the software version of ipod touch

    hi frnds,
    Does anybody knows advantaes in updating the software version of ipod touch to 1.1.4?...is there any particular feature in that?..

    It's got several bugfixes, but nothing major.
    I wouldn't know of a reason why you shouldn't update, except you've jailbroken your iPod...
    I'd say go ahead.
    Hope this helps.

  • Does LC 2.5 support MySQL 5.1.54?

    Hi
    I want to install LC 2.5, but I can't find the right version MySQL 5.1.30, which is written in the installation guide, in the MySQL official site. And it seems the a win32 version can download from other sites but I need a 64 bit version.
    So I need to know Does LC 2.5 support the latest version of MySQL?
    Thanks for your help.
    Shoku

    If you install the Turnkey version of LiveCycle ES2.5, it will install the supported MySQL version for you.

  • ?Finding Device ID of missing Ipod Touch that is not listed in our latest software version for ITunes

    Hi There,
    I'm trying to locate the device ID for our missing IPod touch.  It has not been used for a while, does not have the latest updated software version, and is not showing up in ITunes under devices, along with one Ipad and 2 Shuffles?
    Thasnks
    Steve

    Do you mean the serial number:
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number

  • I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

    I have MacBook 4.1 laptop with a Version 10.5.8 software. Does this software version support iCloud? Can this MacBook be updated to the latest software version?

    Once you are at 10.6.8 Lion is still available from Apple. You will have to call Apple Customer Care 1-800-692-7753 or 1-800-676-2775. to purchase it. Then within 3 days you will get an email with a code which you can use to download Lion from the App Store.  The price is $19.99.
    Lion will require at least 2gb of RAM but really needs 4gb to run smoothly.
    As for third party programs see this list for compatibility with 10.7 http://roaringapps.com/apps:table
    Also Lion doesn't run any Power PC programs. To see if you have any Power PC programs go to the Apple in the upper left corner and select About This Mac, then click on More Info. When System Profiler comes up select Applications under Software. Then look under Kind to see if any of your applications are listed as Power PC. Universal and Intel will run under Lion.
    Before Mac switched to Intel processors in 2006 they used Power PC processors from 1994 to 2005. Power PC 601 through 604, G3, G4 and G5. Applications written for the Power PC processors need the application called Rosetta to run on Intel processors. This was part of the Operating System in 10.4 and 10.5 but was an optional install in 10.6. With 10.7 Lion Apple dropped all support for Power PC applications.

  • What software version does the iPhone from technical support have?

    My old iPhone (2g) died and I brought it to Apple. The Genius Bar replaced it with the same type of phone, but what is the software version? Is the phone that tech support gave me software 2.0, 2.1, or some older version?

    Are you kidding?
    You have the iphone. Look at it and see what version it has.
    Settings>General>About>Version
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

    If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
    "SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
    I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally.  Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
    Below is a SOLUTION (WORKING) !
    Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
    1) "HP Software Framework"
    2) "HP Service" [no typo - a real plain name]
    If not running, set Properties-->Manual and click "Start", make sure both are running.
    Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
    Should work from within Windows environment.
    Notes:
    a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
    I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
    b) After done, don't forget:
    *) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
    **) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled.  The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
    BUT nobody is requiring you to disable anything though.
    The solution merely states the fact:
    These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
    Simply restartung them solves your problem.  Usually
    Ya'll have a good day and enjoy!
    ===========
    BELOW ARE IMPORTANT WARNINGS:
    1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER.  DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
    2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
    3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware.  In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
    So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
    Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
    ===
    Stan M. Starinski, MSEE.

    Hello Ceramics.
    Your ProBook is an Enterprise model.  It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product.  Here is a link.
    Have a great day!
    Please click the white star under my name to give me Kudos as a way to say "Thanks!"
    Click the "Accept as Solution" button if I resolve your issue.

  • TS3694 i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015

    i was doing update on my apple iphone 3g 8gb during update an error ocured namely 1015. and when i was doing restoration of my previous software version once again error ocured namely 1015.
    and 2nd i have downloaded few free apps like face book twitter etc on my itunes but when iam installing them to my iphone its not installing i dont know why plz help me to install them thanks

    Errors related to downgrading iOS
    The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
    Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
    Maybe you phone has been jailbroken

  • I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    I accidently deleted Safari and now I can't reinstall because it keeps telling me there is a newer version on my computer.  The issue is my system does not support the newer version.  Does anyone know how I can get around this?

    Apple wanted to charge me 50 bucks jsut to talk to someone! 
    I believe you may be referring to the $49 ASL agreement at AppleCare? That is only when/if you are out of AppleCare Protection.
    Can you get to an AppleStore Genius Bar?
    They may be able to fix this for you. No charge.
    I highly doubt that. There is a $70 charge for troubleshooing software issues, EVEN IF there is AppleCare Warranty on the hardware.
    However, since there is no charge for an appointment at a Bar, go make one, and see what options they give you. Let us know how it goes.

  • I have an idea for a new feature of the calendar app on a new software version. Does anyone know how to contact Apple to let them know the idea?

    I have an idea for a new convenient feature of the calendar app on a new software version. Does anyone know how to contact Apple to let them know the idea?

    First see here  >  http://www.apple.com/legal/policies/ideas.html
    You can leave Feedback here  >  http://www.apple.com/feedback/

  • I have an I Pod Nano and would get messages to update my software.   In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs.  My current software version is 1.0.2.  What am I doing wrong or is it something in the software.  I h

    I have an I Pod Nano and would get messages to update my software.  In my I Tunes I have 1,900 songs but after the updates it will only sync 933 songs.  My current software version is 1.0.2.  What am I doing wrong or is it something in the software.  I have not done anything different in my I Tunes and all songs are checked.  Could someone please help or advise me what to do?

    Thank you Gail, but not to be ignorant but can I send you a print screen on what I am looking at.  I will try am explain what I see: I hooked up my I Pod Clicked on Music checked Sync Music 1909 Songs select Playlist, Artists, albums, and genres checked Include music videos Playlists checked 50's Music checked 70's Music checked 80's Music checked 90's Music checked 2000 Music checked 2010 Music   These are songs that I downloaded onto my I Tunes.  I bought me a new computer but when my data was transferred from old computer to new computer a lot of my songs on my hard drive were lost, but they were able to save all my songs on I tunes.  My I Pod is still connected Clicked on "On this Ipod" Music 938  Songs 2.2 days So my question to you is if I have 1,909 songs on my ITunes how come only 938 transferred to my IPod.  I checked my IPod and it shows only 938 songs transferred.  This did not happen before until I Tunes asked me if I wanted to update to a newer version.  Last month I did have all my 1,909 songs on my I Pod.  I hope this explains what I am asking

  • NI-DNET software version 1.4.2 does not show up on Labview 8.2

    I am using the NI Devicenet PCI card in my system. After installing the 1.4.2 software, I had no trouble communicating with my Devicenet controller with Labview 8.0. After downloading Labview 8.2, I no longer get the devicenet vi's on the Instrument I/O pulldown menu. I can find the VI's by choosing "Select a VI" and then browsing my directories until I find the VI I want, but this is very time consuming. Also under Find Examples, therre were a few Devicenet examples under Hardware Input and Output. Those examples are no longer there.
    Thanks,
    Roger

    Hi Roger,
    NI-DNET 1.4.2 supports only LabVIEW versions that were released when NI-DNET 1.4.2 got released (LabVIEW 7.0 ... 8.0). Please use NI-DNET 1.5.1 if you need NI-DNET support for LabVIEW 8.2.
    You can find it on ftp://ftp.ni.com/outgoing/NI-DNET151.exe
    It will be available through the regular download channel in the next few days.
    Regards,
    -B2k

  • Do the Imac support Corel graphics software?  Or does Apple make its own graphics software?

    Does the Apple Imac support Corel Draw for graphics design?  Or does Apple provide its own graphics software package when making an Imac purchase?

    There are thousands of graphics apps available for OS X. A very quick look on Corel's web site showed Corel Draw is not available for OS X, probably another reason Corel is in sad financial shape. Apple does not include any graphics creation software when you buy an iMac what is included is OS X and the iLife suite of products.
    If you are interested in a substitute for Corel Draw then I'd recommend using Google to search for OS X alternatives, I'm sure you will not have a problem finding many suitable alternatives.

  • Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi. Does anyone know what video editing software is compatible with my MacBook - version 10.6.3? I am looking to edit films and already have Final Cut Pro, but am looking for something a little more basic and easier to use. Thanks. Vicki

    Hi Cereskit
    Thanks again for the message. I've done the updates and have the App Store on my desktop. I went into it and searched for imovie but couldn't find the basic imovie, which I presume is what I'd need for editing?, rather than imovie 11 for £10.49, which is for making trailers, it seems. Also, were you saying that imovie would be free?
    Vicki

Maybe you are looking for

  • Field missing in the sales order.

    Hi Experts, We have notification for which the sales orders are created. Whenever some changes are made in the notification they get reflected in teh sales order once u open it an save it again. But this time when we made some changes on the notifica

  • I have the app and the toolbar on my browser won't let me re-sync!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    I"m so out done!!!!!!!!!!!!!!!!!!! I can't re-sync my Iphone with my browser....there is nothing that says manage my account!!! I signed out by mistake on my iphone and now can't resync....what a pain! I've reinstalled the app 2 times....and still no

  • Comprehensible question regarding the usage of a ccBPM in SAP PI 7.31

    Hello experts, I have got basic question about the useage of ccBPM in PI 7.31 double Stack. I haven't  created any ccBPM before so the whole set up process is new for me. We are currently using several ccBPM already which where created by our colleag

  • Site Definition issues when entering remote info in DWcs3

    good day, I am hoping someone can assist me with getting one of my new sites up and running. I am still on Dreamweaver CS3 as my hard drive at thsi time can not support hte size of CS4. I have created a new website for a friend of mine and she has pr

  • Need sql query

    Hi, I need a query having the column name with comma... For Ex. select table_name from user_tables; I need the output as one, two, three, etc..., Kinldy provide me the query,... Rgds... Edited by: user537350 on May 28, 2009 10:20 PM