Does Mavericks support lightscribe?

I used to print label with Disc Cover 3 and a Lacie external lightscribe CD/DVD drive with snow leopard.
Since I upgraded to Mavericks Dic Cover doesn't see my lightscribe drive aymore?
I couldn't find any new driver for mac os available yet.
Do you know if Mavericks still supports lightscribe and if drivers are available?
Thanks and regards,
Valerio

It would seem Lacie stopped supporting Lightscribe a long time ago - circa 2009.
See http://www.lacie.com/uk/support/drivers/index.htm?id=10008
Therefore it looks like you are not going to find any Mavericks compatible software. If you have an older iMac which can boot in to Snow Leopard then an option would be to have an additional boot disk setup for Snow Leopard with the old LightScribe software.
You could also read the following and try the software it referrs to.
See http://www.tuaw.com/2013/06/24/lightscribe-software-for-optical-disc-labels-fina lly-updated/
The following might also be a suitable replacement for Disc Cover, it claims to support LightScribe and Mavericks
See http://smilesoftware.com/disclabel/download.html

Similar Messages

Does Mavericks support the LSILogic LSI7404EP?

Hello again,
I've got an Xserve early 2009 running OS X Server 10.5.8 that I've been told is upgradeable to Mavericks.
It has a Promise VTrak E-Class 16 x SATA RAID Subsystem that attaches to it via the LSILogic LSI7404EP and is running Firmware version 1.3.23.0
If I upgrade to Mavericks, will I still be able to see the RAID?
All I want is to utilise the raid for archiving, but I need it updated to work with the newest iMacs.
Cheers,
-Mark

Ah, yes. I was burned by the demise of Final Cut Server also. You could not beat the price and the feature set was decent.
As for the GPU, you have two PCI Express expansion slots. One full height and one half height. So, you can add a discreet graphics card to the unit. As far as I know there is no replacement for the built in card. That GForce is as far as it goes. Also, I don't recall there being many options that work in the slots as I do not believe there is the optional power cable to support the newest of cards. You can take a look at some of the cards that were offered in the MacPro from around the same time but be careful what you purchase. I think there are crazy solutions like external PCI cases that can provide faster graphics but I am not sure you want to invest in a machine of such age.
Good luck.
Reid
Apple Consultants Network
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store
Author "Mavericks Server – Control and Collaboration" :: Exclusively available in Apple's iBooks Store

Does maverick support iPhoto 08

I recently downloaded Mavericks and it now seems that I cant access iPhoto. I have an old version i
Photo 08 version 7.1.5.. Is this my problem? I guess I will have a problem with iMovie 08 as well (version 7.1.4). I had previously purchased Snow Leopard upgrading from the Leopard which came with my iMac way back in 2007.
Is the only option to purchase the latest i Photo? Will I then be able to access my photos?
Thanks in advance

When I right click on iPhoto I get a pop up box - see below - with iPhoto library, i Photo (ticked),options. show all windows, hide and quit. I cant open i Photo,
I cant open iPhoto library nor can I open it in Finder
I have time machine on regular backup but cant get anything to show in iPhoto except the library stating the number of GB

Does Mavericks support FCP 7?

Hi there,
I had FCP 7 (FCP 5 with FCP 7 upgrade pack) and I'm near to needing a hardware upgrade, so just want to see what the state of play is on my accompanying software.
Appreciate any advice/support.
Thanks,
Mark

Boot Camp forum is here:
http://discussions.apple.com/category.jspa?categoryID=237
In any case a simple search got this:
http://support.apple.com/kb/HT3986

I run a studio in Atlanta. I am doing an upgrade to Protools 11. Avid does not support Yosemite. Mavericks is no where to be found on App store. Had to purchase Mountain Lion. I am losing money waiting on Apple to "ship" / email me a activation

I run a studio here in Atlanta. YEster day morning I called an Apple store to see if I could buy a copy of Mavericks. They forwarded me to Apple Care. Apple Care tech and myself could not find Mavericks anywhere on the app store. Avid does not support Yosemiteam yet, so I had no other choice but to purchase Mountain Lion. It has been over 24 hours waI ting on Apple to "ship" / email me a code to download from the app store. I read a lot of horror stories from when they rolled out Mountain Lion in 2012 about it taking 72 hours to receive the codes. I hope that maybe it doesn't take that l9ng this time because I am losing money by the minute. Microsoft would have had a code to me in minutes. This is just crazy. I have used Apple products for years, but this is very disappointing. Anyone else ordered Mountain Lion recently? How long dI'd it take Apple to "ship" you your code via email? Thanks

From what I've read on these forums over the past few months, it hasn't gotten any better. An electronic order from any company shouldn't take more than 12 hours for a system to respond to, but people have been waiting up to a week for their redemption code email to arrive. It makes no sense to me why it would take that long.

Mavericks Server; smbd: File system does not support 0x0, time/size attrs

So I recently installed a Mac Mini with Mavericks and Server 3.2.2 in the main office of my company and everything has been going well, minus a few expected bugs, until recently. Starting last week we've been experiencing random intervals where File Sharing stopped working altogether, and I'd been able to reboot and get it running again. Unfortunately, as I'm the Systems and Server Admin, I've been too busy to look at the logs until now (following the degradation of one of the drives in our DAT-Optic RAID system, I figured it was time to make it a priority), and I'm seeing dozens of entries in the system logs regarding the process smbd with file system does not support errors.
Here's an example.
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.107 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.108 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.110 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.119 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.124 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.125 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X40000, file attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0 time attrs
11/19/14 9:56:21.130 AM smbd[602]: File system does not support 0X0, size attrs
11/19/14 9:56:21.131 AM smbd[602]: File system does not support 0X40000, file attrs
As far as I can tell, nothing else has changed in our system except for the fact that one of the drives died and was rebuilt as of yesterday (these smbd problems extend to last week shortly after I updated to 3.2.2 I believe). Any help would be much appreciated. I would normally first attempt a repair permissions to see if the issue is related to a bad plist somewhere but the last time we did that, our ACLs were duplicated across our file share and often incorrectly. I'm not sure if it's just me but the last Mac Server software I used was Snow Leopard Server (when it was still a full OS version) and it was infinitely more stable than what I've experienced thus far with Server 3. Anyway, I appreciate any help/advice that can be given and I apologize for the rant.

Been getting the same errors for a while.
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
Believe they are related to random disconnects from the file server (10.9.5).

Mavericks does not support VM Fusion. What can we do?

Mavericks does not support VM Fusion. Can we downgrade?

Can you be clearer about the problem? Are you trying to install VMware Fusion on a Mavericks system? If so, what version of Fusion? Have you upgraded to version 6 or 7?
http://blogs.vmware.com/teamfusion/2013/10/vmware-fusion-6-and-os-x-mavericks-th e-perfect-combo.html

Okay, just tell me now that Mavericks does not support iMovie 6 HD which I have migrated across my devices since it first came out as iMovie 4. If this is true, then I will just jump off the nearest bridge, as I use it as a business.

Okay, just tell me now that Mavericks does not support iMovie 6 HD which I have migrated across my devices since it first came out as iMovie 4 and have supplemented with third party add ons from 3Gee. If this is true, then I will just jump off the nearest bridge, as I use it for my videography business. Since upgrading to Mav, I can not get the program to launch and am getting no pop up to tell me what is going on. It let me open and start a project at first, but then I was half way through and it crashed and I lost everything and now will not launch at all. Does anyone out there still use this magnificent program? Please help—the wedding I just commissioned is on hold and I am not want looking forward to facing a bridezilla.

right now just to get yer work done, get ahold of any OS that will run iM6HD and get it done. then dump MAVRICKS (wait till 10.9.2 at least) and retro back to OSX 10.6..or 10.7 (if you have it). I use FCExpress4 on 10.6....you might want to consider keeping a dedicated mini or something that ONLY runs your editing sw. I have 2 older machines that I will never upgrade because the editing SW wont run on the newwer OSs.
abuve all, be honest with your client. we all got kind of blindsided by this initial relese (like a bug infested matress).
ask if they have any apple stuff that has Mavricks probs. bridzillas only happen when they are out of the loop. Keep them informed. but ...also be ready to duck.
hope this helps.

I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?6

I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?

Boomba29 wrote:
I'm still using 'good ole' Appleworks 6 on Snow Leopard. I'v heard that Maverick does NOT support Appleworks 6. Is this true?? Are my 20 years of Appleworks files now useless?
Word Processing documents can be opened directly in Pages 4 (AppleWorks 6 only) but this is no longer available from Apple - the new Pages 5 (Mavericks required) does not open AppleWorks documents. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.) Panergy Software's docXConverter v3.2 ($19.95) can convert Appleworks 5 and 6 Word Processing documents to RTF (though it has been reported that it can only handle documents which contain only text, not those which include images or frames). The latest version of the free LibreOffice has announced that it can open AppleWorks 6 Word Processing documents and an ability to open ClarisWorks documents has been reported: it does appear to be able to handle at least some embedded images.
Draw Documents can be opened directly only in EazyDraw (the more expensive version from their website, not the cheaper one from the Mac App Store, and you will need v4.0 'Retro' not the most recent version) or Intaglio (though this appears not to be able to handle very complex drawings). LibreOffice will open simple Draw documents but I found it very unreliable with complex ones.
Spreadsheets can be opened directly only in the older versions of Numbers - the new version for Mavericks will not do this. The old version is no longer available from Apple. (Again, the older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Presentations can be opened directly only in the older versions Keynote; again, the new version for Mavericks will not do this. The old version is no longer available from Apple. (The older version is contained in the iWork '09 box set which may still be available from Amazon and other independent retailers.)
Nothing will open Database documents. You would need to export the data as ASCII and import it into another database program; you will lose your formatting and calculations will come over as the result, not the calculation.
This article examines 'abandoning Appleworks' in detail:
http://wilmut.uk/aw

Mavericks-updated QT now does not support chapter exports!?

Hello,
For the last few years, I've been able to take a .mov edited in Prores 422, with FCP, and save as a master. Then, I'd open that file with Quicktime, and export as 1080P.
The result before tonight has been a moview with H.264 encoding (considerable smaller than 422), with 'text', or Chapter Markers.
Example of file info: Apple ProRes 422, Linear PCM, Timecode, QuickTime Text
Now.. after installing Mavericks.. the same process just creates 'AAC, H.264'.
The text codec has been stripped.
1) Is there a good workflow, or do I have to install metadata hoot.. or handbrake?
2) Can I roll back to a quicktime version prior to the version Mavericks has tweaked.. and still keep Mavericks?
Please help. Thank you in advance!
~Bob

Been getting the same errors for a while.
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:04.975 AM smbd[1112]: File system does not support 0X0, size attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X40000, file attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0 time attrs
1/13/15 11:38:05.124 AM smbd[1112]: File system does not support 0X0, size attrs
Believe they are related to random disconnects from the file server (10.9.5).

Pages 5.0 version does not support pictures in header

I recently installed new soft OS X Maverick and along with this also renewed soft for Numbers, Pages, Keynote, and some more apps.
Pages version 5.0 does not support its earlier version pre-set headers and footers. All the logos (picture files) I had inserted for my company template in the header are gone and I cannot re-enter them either. Does anyone can give e a hint on how to use picture files in Pages version 5.0 templates?
This is first time in 2+ years that I prefer to use MsWord over Pages on my Mac, which is a pity.
*I have tried to get used to new soft versions of numbers and pages now for around 3 weeks but it cannot make me to change my opinion that the eralier versions were much better. Unfortunately with OS X Maverick I have to use new versions for these apps, or do I, any hints?
I already deleted once (2 weeks ago) OS X Maverick and switched back to OS X Mountain Lion (I use TM), but then decided after while to still update the op system soft to newest one available, as I've hoped that developers in Apple will come up with their soft improvements and bug fixes soon enough.
Among the other disomforts (like pages, numbers and changed tag system) Safari is much slower than with previous version.
Any hints are appreciated!
Thanks, Paul

https://discussions.apple.com/message/21546508#21546508 check this out

Tuxera Version That Comes with HDTC705XK3A1 Does Not Support on Install on MAC OSX 10.9.2

The Tuxera version pre-installed (2012.3.6) on my hard drive does not support Mac OS X 10.9.2
I first looked at the support site and it says there isn't any updates for drivers & software for the Toshiba 500GB Canvio Connect Portable Hard Drive (HDTC705XK3A).
I am on OSX 10.9.2 and would like a working copy of Tuxera to use with my new Toshiba drive. Please advise where I get the updated version. Going to Tuxera requires buying a copy of the software.
Thanks,
Doug

I have the same problem after an upgrade to my iMac. Fortunitely, a wWindows machine will read your drive. I also have a new Macbook Pro with 10.9.3 on it and it loaded Tuxera correctly. Not sure why it works on one not the other. I wnet through the following steps:
After I upgraded my iMAC to Maverics, I could not see my NTFS drives in finder or on the desktop. I could see my NTFS drives in Disk Utility but they were grayed out and are not accessible. I could boot the iMac in Windows and have access to all of my NTFS drives.
I tried reinstalling the latest version, 2013.2, downloaded from your web page. I can see my NTFS drives but could not write to them. I then got the following message when the system started up, "invalid product key". When I opened Tuxera from the system preferences page I get the following message on the Activation page, "Current status: Invalid product key. Limited performance mode." I have tried reloading Texura from the Toshiba drive, but the process doesn't complete the last step.
As a last step, I uninstalled Tuxera and can not reinstall it. I get the message "The Tuxera NTFS for Mac installer could not detect your Toshiba External HDD. Please attach it to your Mac and run the installer again. I'm running the installer from the Toshiba drive so the installer should detect it.
Please note, I have a new Macbook Pro that came with Mavericks and I loaded Tuxera from the same Toshiba drive. It has no problems writing to it. The upgrade to Mavericks caused the problem.

Macbook Pro Retina HDMI Does Not Support 2560 x 1080

I have both the early and late 2013 rMBP 15 inch but it seems like the early 2013 does not support my Dell U2913WM at maximum resolution of 2560 x 1080 for some reason on HDMI. Are the HDMI ports any different between the two? I'm tried using SwitchResX, but at 2560 x 1080, I can only go up to 53 Hz before it says invalid configuation on the early 2013 rMBP. On the late 2013 rMBP, it can output 2560 x 1080 at 60 Hz fine. It would seem like both graphics cards are more than capable of pushing this resolution, and if I connect through Displayport, they're both fine too. I was hoping to use HDMI though to free up a Thunderbolt port. Why are the HDMI ports not outputting at the same capabilities?

Absolutely, I understand that but I'm wondering if or why Apple has limited the HDMI port on the early 2013 rMBP. HDMI 1.4 should be more than capable at outputting up to 4k resolution, so it would seem like Apple is intentially limiting the early 2013 rMBP to HDMI 1.2? At least one post from as early as 2012 seems to suggest that installing Windows on a rMBP allows higher outputs. I thought Mavericks included support for HDMI 1.4 (http://www.reduser.net/forum/showthread.php?101431-10-9-Mavericks-4K-working-tes ting-it-now) but did they not extend it down to the early 2013 rMBP? Seems like it would be able to support it, no?
Perhaps the better question is whether anyone has been able to output anything at over 1080P on anything other than the latest rMBP after upgrading to Mavericks?
From the earlier discussion:
"The port definitely supports it, but OS X is another story. If I boot into Windows and connect it to a display capable of displaying 2560x1440 over HDMI, it just works. If I'm in OSX, it refuses to allow anything over 1920x1200. Even if I try to force the resolution with SwitchResX, it doesn't work. If I create a custom resolution with a 40Hz refresh rate instead of 60Hz, then it does actually work. 2560x1440 @ 40Hz fits within the bandwidth constraints of a single link at 165MHz. So it appears that OSX limits the port to 1.2 frequencies. I'm not realy sure why -- HDMI 1.4 should allow for frequencies upto 340MHz, and the hardware is clearly capable based on Windows."
Now that Mavericks supports higher than 1080P over HDMI at least on the latest rMBP, did they just not extend that support to earlier rMBP's even though the hardware is capable of it?

Does iBooks support .cbr files?

Does anyone know if iBooks for Mavericks supports .cbr (comic) files? I have a bunch of comics I have saved and wanted to know if they were compatible with iBooks.

I am just joinning the Apple world and I don't know much about it yet, but, I believe there may be an app that does what you need, instead of the iBooks app.

Latest version of itunes does not support Quicktime can not play movie from library

Latest version of Itunes does not support Quicktime. I can not play movies out of my itunes. Please fix

I don't usually download video from the iTunes store. I had a couple of long plane rides coming up and thought I might have time to watch the Stanford IOS7 programming class. On the plane I discovered this issue which has gone unaddressed since 2011 and has been worsened in Mavericks. in 2011 the advice was to open iTunes' get info pane and click run in 32 bit. That worked at least for some people. In Mavericks, iTunes will not launch in 32 bit.
For the files you can locate in the finder ( mine are at
/Users/raine001/Music/iTunes/iTunes\ Media/iTunes\ U/Developing\ iOS\ 7\ Apps\ for\ iPhone\ and\ iPad/1.\ Class\ Logistics\,\ Overview\ of\ iOS\,\ MVC\,\ Objective-C.mp4
) you can click on the file in the finder and it will launch in QuickTime. For some reason on the plane I could see the first lecture in the iTunes view but, although I could see all the other lectures in the finder, I could not see the first one.
Ah well, maybe some other year I'll think about getting up to speed on ios7. Heck, maybe by then they will design a decent user experience.

Does Mavericks support lightscribe?

Similar Messages

Maybe you are looking for