Does MBP support UDF/packet reading stuff out of the box?

Hi
Just curious - if I pop in a CD-RW or DVD-RW can I drag and drop files onto it, or do I need to install an app like Nero ?
Thanks in advance.

You can create a special folder in the "Finder" (kind of like the explorer in windows) called a Burn Folder. Then you drag all the files you want onto this folder and burn it to disk. Something like Roxio's Toast software will give you more flexibility but it's not essential.
hope that helps
arum

Similar Messages

  • Does OIM Provides Orphan Accounts report generation Out of the Box ???

    Hi All ,
    Does OIM Provides Orphan Accounts report generation Out of the Box ???

    Nopes, OIM Doesn't.
    Custom Report
    Re: How to generate a report on 'Event Received' events for a resource objects
    http://download.oracle.com/docs/cd/B32386_01/generic.902/b32137/reporting.htm

  • Webcam and microsphone does not work on my new hp out of the box?

    Just bought from Best Buy? HP - 17.3" Pavilion Laptop - 4GB Memory - 320GB Hard Drive - Pewter
    When I turn on the webcam it says it is not enabled
    when I connect through skyp, it is says mic is not enabled.
    I verified them and they are enabled. This is just out of the box system.

    Hi hk33,
    Did you verify them in Device Manager?
    Once you have verified that they are enabled in the Device Manager go to Skype setup. 
    Setup the HP webcam as the video source for Skype. 
    Setup your microphone and sound for the notebook and then exit the setup.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Does Apex 3.0 have PDF creation out of the box?

    I was hoping that it does....

    No.
    There's a couple of threads a little ways down that explain it. You either have to have BI Publisher (Yikes!) or, go download another free package and install and configure it.
    Chad

  • Does the K8N Neo-FSR support the mobile chip out of the box

    just like the titles says
    does the K8N Neo-FSR support the mobile clawhammer out of the box.?
    if not what bios would i need,. or can anyone confirm what bios is being shipped on these motheboards now.

    Jim,
    From what I've read, there are updates to the memory controller and the addition of SSE3 support to Venice.  It's also reported to have some performance improvement over Winchester and Newcastle.  It will use a default 1.4v VCore.  Hopefully, It's power comsumption is on the same order as the 90nm Winchester's or less.
    If Monarch is shipping the combo with available Bios, you can bet they work.  I'm thinking of giving them a call on mine to transfer the 2yr warranty to my youngest daughter (it's a graduation gift) and to discuss the Bios 3.3 vs. 3.3B3 issues.   They shipped mine with B3, and I think there may be a reason.  The B3 works great with a simple WPCRSET patch of the CAS to RAS Delay.  That's why you see those memory settings working on mine.
    On the "boxed" vs. OEM, I think buying the combo with warranty and a better heatsink is a much better choice.  Use the Venus 7+ in my specs.  It's low profile, all copper, and one of the highest rated.  Monarch has it in their configurator.  It's as quiet as AMD's.  Monarch also gives you a 30 day free return with a Fedex prepaid shipping label in the package.
    Danno

  • Need MBP previous specs out of the box

    Just bought a new MacBook Pro on April 15, just a few weeks before the new MBP came out.
    1. Does anyone know what the previous MBP specs were out of the box?
    2. Can anyone tell what the difference between the two out of the box?
    Thanks.

    You can find product specs at support.apple.com/specs/.

  • HP Pavillion Does NOT work Straight Out of the Box after Purchase

    My daughter bought a new HP Pavillion from Office Depot before starting computer classes at the university.  The first one would not work at all and after the tech folks tried all that they could and it would not work, the Office Depot staff exchanged it for another one.  Straight out of the box, it does not work. It crashes constantly.  My daughter has spent HOURS that she needs for assignments on the phone with HP tech support.  Here is where she stands with the situation now:  She bought the extended warranty, but apparently that does not cover computers that don't work.  The HP warranty....does not apparently assure that you get a working computer either, even when it's just days old and won't function.  So....after spending from about 1p to nearly 6p today on the phone with HP tech support, she is not assured that it will work. 
    They are calling back on Friday to see.
    So if it is NOT working, are we just out of luck with a piece of junk that does not function except as a word processor?  That won't connect to the internet without crashing?  We have been given no options or assurances.
    ( Post edited by Moderator)  When you buy a computer, it should work when it's brand new.  If you have a warranty, does that mean that HP stands behind their product and refund the consumer's money when it doesn't?  The new HP Envy printer did not work, due to a defective ink cartridge enclosed with it.  Does any HP product work at all? 

    @Mariellynne 
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
    I work for HP

  • 12GB already used on out-of-the-box refurb MBP?

    Hi-
    Just a quick question--
    My refurbished 15-inch MBP (2.2 Ghz, 120 GB hard disk) just arrived. I took it out of the box, started up and registered, and was planning to shift things from my old Powerbook G4 in Target disk mode, etc, but haven't done ANYTHING else yet. Out of curiosity I clicked on About this Mac, and saw that my HD has a capacity of 111.47 GB (I understand that "120 GB" probably means about 111 GB in reality), but that there is only 99.05 GB available, and 12.42 GB already used. Is that how much is needed for the basic Tiger (10.4.10) and applications that came preloaded on my MBP? If not, any ideas why 12.42 already used? Should I do an erase-and-install with Tiger OS? Do you think Apple didn't fully clean or erase the disk?
    Thanks,
    Samantha

    When Apple says "120 GB hard drive" they mean 120 billion bytes. But strictly speaking, 1 GB is 10243 bytes, not 10003 bytes.
    So when Finder says "111.47 GB capacity", it means 111.47 gigabytes, which is 111.47×10243=119.69 billion bytes. So your question is actually what happened to the missing 296 MB (or 0.31 billion bytes), and the answer is one of rounding error, disk overhead, or an extra partition on the hard drive used for booting. (The Boot camp forum has comments about an "extra" 300MB partition on the hard drive.)
    Unfortunately, the misleading "x GB hard drive" label for what is really an x÷1.0243 GB drive has become an industry standard, and is always stated in the fine print.

  • Why Java Web Start doesn't support Pack200 out-of-the-box?

    Hello All,
    Why Java Web Start doesn't support Pack200 out-of-the-box? I was hoping that Java 6 would make things easier by adding direct support for Pack200 in Java Web Start and JNLP without needing to use servlets, etc.? All my clients are Java 5 or above so I can't push the Pack200 compressed version of the jar to every single one of them and there is no selection process needed. But I can't do it because of the servlet or complex Apache server setup requirement (it would be a headache to get customers' web server admins to set up Apache or whatever web server that way).
    My question is why is there unwillingness to add Pack200 support directly to Java Web Start and JNLP so that you can start Pack200 compressed jars just like you would start any jar using Java Web Start? Is te a technical problem?
    Thank you,
    Mete Kural

    Hallo,
    I didn�t try it, but the webstart FAQ�s read:
    Can I use Pack200 compression with the JnlpDownloadServlet?
    Yes. The JnlpDownloadServlet distributed in the samples directory of the JDK now supports Pack200. If you deploy yourfile.jar along with yourfile.jar.pack.gz the packed file will be downloaded when the client is running Java Web Start 1.5.0 or later.
    http://java.sun.com/javase/6/docs/technotes/guides/javaws/developersguide/faq.html#217
    For further information you may want to look at
    http://java.sun.com/javase/6/docs/technotes/guides/javaws/developersguide/downloadservletguide.html#pack200
    The configuration of the server and the the servlet (as described in the second link) is as easy as it seems.
    I got it working on the first try and it was my first experience with websevers at all.
    Bye Schippe
    Message was edited by:
    Schippe

  • Out of the box support for Solaris 10???

    I'm curious to what video and network cards are supported out of the box for Solaris 10? I have already viewed the HCL, but the list doesn't really give a straight answer.

    I'm curious to what video and network cards are supported out of the box for Solaris 10? I have already viewed the HCL, but the list doesn't really give a straight answer.

  • Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall  I do.Thank you

    Hi, my product is under warranty and has a power button issue. Greek dealer doas not support it becouse I bought it from the us. wharT shall  I do.Thank you

    It can only be serviced in the country where it was originally sold.  Take it back to the US or send it to someone you know there to take it in for service.

  • My Foxtab page websites slip out from the boxes and are all muddled up. I have uninstalled and reset but still does it. My system is Windows 7

    For about 4 weeks my Foxtab will not work properly. I fill the boxes with websites but they slip out from the boxes and when I click on one of them I get a different website. I have uninstalled Firefox and set up[ again but this makes no difference.

    If the FoxTab extension isn't working properly then you need to contact FoxTab for support.
    *https://addons.mozilla.org/firefox/addon/foxtab/
    *http://www.foxtab.com/support/

  • My phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    my phone has gone into recovery mode on its own.  says to connect to itunes.  i have restored it 10 times and it does nothing please help me i am out of the country and desparate

    Open iTunes on computer. Connect iPhone to computer. If the iPhone is recognized in Recovery Mode, then Restore the Firmware. If not recognized, then hold both Home and Power Buttons until the iPhone is recognized in Recovery Mode. Usually takes about 20 seconds of holding both buttons. Restore the iPhone Firmware.

  • I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time

    I can pair my iPhone 4 with my MacBook and my Macbook Pro but they will not connect. My iPhone keeps telling me it does not support this even with bluetooth turned on.The devices section keeps searching all the time. Is this an antenna problem? Or something else ?

    Your iphone is right, it is not supported. The iphone's bluetooth protocols do not include file transfer, but are intendes only for headsets, stereo headphones, cars, and keyboards.

  • Out of the Box MacBook Pro does not burn DVD DL

    Hi
    My new out of the Box MacBook Pro 2,8 Ghz, 500 GB HD does not burn DVD DL.
    Its telling me something like "Servo Error" in Toast 10.0.4 and also iTunes with a big playlist in DataDVD burn mode does not get the job of burning a DVD DL done.
    It makes me soooo sad.
    I had problems with my DVD Drive on my Power Book G4 12", also on my MacBook 2,16 Ghz even after a repair it would not burn DVD DL.
    So what to do?

    Hi
    Thanks for the tips.
    Well since its a absolutely new MacBook Pro it should burn DL as stated on the Box. So I call the store and they will sent me a new one.That worked very nice and smoothly, so here on costumer care apple is on the very big side.
    I hope the new one will burn em right away.
    You know: Why do they put such bad drives in their so nicely build MacBooks? I don't get it at all. Maybe we are short before Bluray and so they putting inn all the old drives.... Who knows.
    Its well know that apple is not using very good drives in their computers.
    Na ja so ist es halt.
    Keep the good work up!

Maybe you are looking for