Does migration assn't copy the system also

does migration assn't copy the system also.

No. It is only for migrating user accounts and other computer settings. OS X must already be present.

Similar Messages

!0.5.8 How do I copy the 'system' form one internal Hard drive to an other (BY CD Packed up) Thank you

!0.5.8 How do I copy the 'system' form one internal Hard drive to an other (BY CD Packed up) I have tried but it will no show 'live' system folder - do and how can I bless it ? Thank you

Carbon Copy Cloner will allow you to de-select directory trees, so you could use it to copy over everything EXCEPT the /Users directory tree.
Mac OS X is NOT just the System Folder. If you do not copy over the rest of Mac OS X, it will not boot. So better to exclude Users and take everything else, then it is to try and pick and choose.
The other approach is to install a New Mac OS X, and then copy over the stuff you want from the home folder(s) and reinstall any apps you want.

HT1657 I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

I have rented a movie 8hours ago, and it will NOT play. The system also charged me twice, for the same movie! How can you help me please?

For the film not playing, you can use the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link.
Not sure whether you can request a refund for the double charge via the same link, if not then you can contact iTunes support here : http://www.apple.com/support/itunes/contact/ - click on Express Lane, then iTunes > iTunes Store

HT3180 I tried again later several times and am afraid the rental period will expire and will not be able to watch the movie. The system also does not allow me to re-purchase the movie.

I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/

Likely network related
What is your current connection, use speedtest
Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
If on wifi try Ethernet
Make sure DNS is set to automatic (settings - general - network)

HT4796 I am trying to copy my itunes library from my Vaio to my new iMac. Migration Assistant finished copying the music, but I can't find any of it and it isn't in iTunes. Help?

I just purchased my new iMac yesterday. I finally got Migration Assistant to transfer all of my music (around 65 GB), but ow it is nowhere to be found on the Mac and they have not been added to iTunes. Help?

In your case, it would be better to have transferred the library to an external drive from the PC. Then, connect it to the iMac and put the library onto the Music folder.
You used Migration Assistant, and it creates a new user with the transferred data.
Open  > Log Out, and log in the new user. Then, open a Finder window, choose Music in the sidebar and you will see the iTunes library. Now, you have to move the iTunes library to /Users/Shared (select Go menu -in the menu bar- > Go to Folder, type that and copy the iTunes library to it). Finally, log in the other user, go to the same folder and move the library to the Music folder.
After doing that, open System Preferences > Users and Groups, choose the user created by Migration Assistant and press the - button to remove it. This is easier if you have an external drive

Does LUKS encryption slow down the system?

How fast is the system after you encrypt / and /home partitions? Does anybody notice any difference compared to unencrypted partitions?
I'm thinking about encrypting partitions, but for speed reasons I don't know should I encrypt just /home or also the / partition.
I found nothing on LUKS homepage.

Technically it must be a little slower, but I never could notice it at all. If you do try it, watch top while you're working, the amount of CPU used by "kcryptd" is basically the amount of power you're giving up.

Recently I cannot view certain attached videos because I need the adobe flash player. It does not get installed and the system says it will do so once firefox is closed. pl.help

recently certain video or pictorial attachments to my e-mails be opened because the system requires the installation of the Adobe Flash player with Java plug-ins. The message also gives a link for installation. It appears to install but nothing really happens. Then the message advises that it will install automatically once security is uninstalled or when Firefox is off. Nothing seems to work. Please help. P.S. I recently also installed the Firefox 4.0 version also

1.Download the Flash setup file from here using Firefox: 
[http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe Adobe Flash - Plugin version]. 
Save it to your Desktop. 
2. Close Firefox using File > Exit 
then check the Task Manager > Processes tab to make sure '''firefox.exe''' is closed, 
{XP: Ctrl+Alt+Del, Vista: Shift+Ctrl+ESC = Processes tab}
3. Then run the Flash setup file from your Desktop.
* On Vista and Windows 7 you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). 
See this: 
[http://vistasupport.mvps.org/run_as_administrator.htm]

CRS process does not startup automatically when the system is rebooted

Hi. all.
SOME TIMES(not always), CRS process ( exactly OracleCRService on
windows2003) does not startup automatically when the windows2003 is
rebooted.
O/S is windows2003 server.
DB is 10.2.0.2.0 RAC database that has 2 nodes.
I am testing a RAC database configuration, and thus rebooting one node
intentionally by turn.
I have tested about 20 times, and 17 times is OK. All required process is up
and all instance is up.
However, 3 times, OracleCRService services does not start, and concequently
database instance does not start automatically.
Here is the log of "crsd.log" file on the active node.
2007-05-31 17:43:13.281: [ CRSEVT][1720]32Processing RecoveryDone
2007-05-31 17:46:51.968: [ CRSRES][3876]32StopResource: setting CLI values
2007-05-31 17:46:52.437: [ OCRMAS][2368]th_rcfg_con: pudata retval [12]. Member [2] might have gone down
2007-05-31 17:46:52.437: [ OCRMAS][2368]proath_master: Node [2] came up/down 1/0 [1]. Problem retrieving pubdata. Should get down reconfig soon
2007-05-31 17:48:26.890: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.000: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.109: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.218: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.328: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.437: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.546: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.656: [ CRSCOMM][2852]32Retrying after CLSC timeout tonmsp109
2007-05-31 17:48:27.750: [ COMMCRS][2668]clsc_send_msg: (028BA8A0) NS err (12571, 12560), transport (533, 57, 0)
2007-05-31 17:48:27.750: [ CRSCOMM][2852]32CLSC connect failed tonmsp109ret = 9
2007-05-31 17:48:27.859: [ CRSEVT][2852]32invokepeer ret 200
2007-05-31 17:48:27.859: [ CRSRES][2852]32Remote start never sent to nmsp109: X_E2E_NotSent : Failed to connect to node: nmsp109
(File: caa_CmdRTI.cpp, line: 492
2007-05-31 17:48:27.859: [ CRSRES][2852][ALERT]32Remote start for `ora.nmsp109.gsd` failed on member `nmsp109`
Is there anyone who can help me?
Thanks in advance.
Best Regards.
Message was edited by:
user507290

oops- wrong forum!
Please try the RAC forum.

HT5824 when I make revisions to my calendar on my iphone, it does not sync and copy the revisions onto my desktop outlook ....how can I do that ?

how can I copy calendar revisions I make on my iphone to my desktop PC's Outlook ?

Hello bsquared94,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
http://support.apple.com/kb/HT2519
Click the download icon to download that item.
Best of luck,
Mario

Does my MAC Air meet the system requirements for Creative Cloud

My 11-inch MacBook Air, purchased 8/22/13, has the following configuration:
1/3 GHz Dual-Core Intel Core i5, Turbo Boost up to 2.6GHz
8GB 1600MHz LPDDR3 SDRAM
128GB Flash Storage
I will be using Photoshop, Dreamweaver, and InDesign

Yes, I've been perusing this page and have spoken with tech support at Apple who referred me to Adobe.
Adobe lists a multi-core Intel processor. I have a Dual-Core Intel Core i5, Turbo Boost up to 2.6GHz. Is a Dual-Core the same as a Multicore?
Multicore Intel processor
Mac OS X v10.7.5, v10.8, or v10.9
2 GB of RAM
1 GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1280 x 1024 display with 16-bit video card
QuickTime 7.6.6 software required for HTML5 media playback

Why does deleting a folder from the Desktop also delete it from my Favorites in my 'Computer' window?

I have a folder on my Desktop that I've dragged and dropped into my Favorites in the side bar. When I try to delete the folder from the Desktop, it wants to delete it from my favorites, as well. How can I delete the folder from the Desktop without deleting the one in my Favorites?

Items in the favorites bar are simply references to physical folders on the hard drive.
There are ways around this if you simply do not want to see the folder from the desktop.
You can move the folder somewhere else on your hard drive. The reference in favorites should still point to the correct folder.
Or you can hide the folder itself by typing the terminal command
chflags hidden
then drag and drop the offending folder into the terminal window.
So you will see something like this – chflags hidden /Users/YourName/Desktop/FolderName
Then press enter and bam, folder invisible but still in favorites.

External Harddisk read only after the system hand during I copy some folders to my external drive.

I'm using macbook pro mid 2010.
I could not write my external HDD 1TB (WD) after I copying the folder from local folder to external folder via my parallel desktop.
During the copying, the system hang halfway and no choice i terminate the copy. SInce that, i could not write my HDD either from OSX or via parallel desktop.
When i check the infer, the HDD shown read only. I truing to use the disk utility to verify the disk but I could not click on the button.
Appreciate someone could advice me beside backup and reformat the HDD.
Thank you!

I've got the same problem here with a Seagate external HD. I've been able to install Leopard on another Western Digital HD and boot from it to copy some files to a newly purchased external, but in Leopard I can't copy my 180GB music library because of several errors. It either says that the file names cannot be copied because they are too similar to another file name (accidental dupes in the library) or that the names are too long to be copied and neither make any sense. I'm trying to figure out how to move all of my music over without having to go through it file by file and without losing anything.
I was able to easily copy all other information from the hard drive; the music is the last remaining item I need before I reformat the external and use it in Snow Leopard as a TM backup drive.

Problems downloading iTunes 10.6.3. The System keeps telling me that download is corrupted.

I have just bought a MBP Retina Display and have successfully mapped all my old apps and files across to this machine from the old MBP. In doing a Software Update for the system I had the problem above when trying to upgrade iTunes. Any similar problems anyone out there ?

Found the solution. I went to the Downloads page and manually downloaded the 10.6.3 update and ran it. Probably registration problems I had when migrating iTunes from old machine to new. !

Selective cloning of the system (HDD to SSD)

Hello there! First things first, my system is:
MacBook Pro9.2 (mid 2012) [13inch, non-Retina]
OSX Yosemite 10.10.1
Now the situation: I have stock 500gb HDD, which is almost filled. Im planning on buying a smaller SSD (256gb) [thinking of Crucial - just in case] to install it as my primary disk, having HDD aboard in Optibay.
The question is: what is the best (if there is exact) way to copy the system and essential user data/apps/settings (incl. Keychain and stuff) to a new smaller drive? (avoiding as much as possible additional backups, temporarily erasing things that exceed the space limit, moving data here and there to create a smaller partition and whatnot). In other words, what tool is more suitable to do such selective cloning, be it Time Machine (I have this option, the whole BU is bigger than 256gb), Migration Assistant, Disk Utility or 3rd party stuff like CCC/SuperDuper etc.?
Thanks!

Install OS X Using Internet Recovery
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed SSD (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.
See the following to finish:
How to use an SSD with your HDD
If you are going to use an SSD as a boot drive together with your existing HDD as the "data" drive, here's what you can do.
After installing the SSD you will need to partition and format the SSD using Disk Utility. Then, install OS X on the SSD. After OS X has been installed boot from the SSD. Use Startup Disk preferences to set the SSD as the startup volume.
Open Users & Groups preferences. Click on the lock icon and authenticate. CTRL- or RIGHT-click on your user account listing in the sidebar and select Advanced Options from the context menu. You will see a field labeled "Home dir:" At the right end you will see a Change button. Click on it. In the file dialog locate the Home folder now located on the HDD (HDD/Users/account_name/.) Select the folder, click on Open button. Restart the computer as directed. When the computer boots up it will now be using the Home folder located on the HDD.
Another more technical method involving the Terminal and aliases is discussed in depth here: Using OS X with an SSD plus HDD setup - Matt Gemmell. This is my preferred approach because I can select which of the Home's folders I want on the HDD and which I don't want. For example, I like to keep the Documents and Library folders on the SSD because I access their content frequently.
Be sure you retain the fully bootable system on your HDD in case you ever need it.

Deleting the system

Compliance Calibrator 5.2 issue:
We have development system ECC 6 system D01 and it is connected to the GRC . Now we have done sod analysis and USER sync up.
I have been assigned to remove that system and then do P01, but when i go there to delete the system it says cannot do it , since there is data for the connection.
How i can clean the system , i mean the data from the system.
Second question for multiple systems ,i mean D01 , Q01 , P01 , which are connected to the system , will GLOBAL ruleset will work on all of them ? I saw somewhere the function risk is tied to the system also ??
Is anybody running this for multiple systems i mean 46C , ECC , BW system and how does the ruleset look like.

rem This is for Temporary Rule fix and DONOT use it in future
rem Contact VIRSA Support for any issue
rem Pass only the system that are required to delete
SPOOL C:\DATA_CLEANUP.TXT
prompt Delete system specific rules in Action Rule Table
delete from <SCHEMA>.VIRSA_CC_ACTRULE
where vsyskey = '&1';
prompt Delete all System specific Alert details
delete from <SCHEMA>.VIRSA_CC_ALLASTRUN
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_ALLISTDTL
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_ALTCDLOG
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_AUTHMAP
where vsyskey = '&1';
prompt Delete system specific rules in Critical Action Rule Table
delete from <SCHEMA>.virsa_cc_cract
where vsyskey = '&1';
delete from <SCHEMA>.virsa_cc_cractt
where vsyskey = '&1';
prompt Delete system specific rules in Critical Permission Rule Table
delete from <SCHEMA>.virsa_cc_crprm
where vsyskey = '&1';
prompt Delete system specific rules in Critical Profile Table
delete from <SCHEMA>.virsa_cc_crprof
where vsyskey = '&1';
delete from <SCHEMA>.virsa_cc_crproft
where vsyskey = '&1';
prompt Delete system specific rules in Critical Role Table
delete from <SCHEMA>.virsa_cc_crrole
where vsyskey = '&1';
delete from <SCHEMA>.virsa_cc_crrolet
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_dataexd
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_fldmap
where vsyskey = '&1';
prompt Delete system specific rules in Function Action Table
delete from <SCHEMA>.virsa_cc_funcact
where vsyskey = '&1';
prompt Delete system specific rules in Function Permission Table
delete from <SCHEMA>.virsa_cc_funcprm
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_funcsys
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_lastrun
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_lsysgrp
where vsyskey = '&1';
prompt Delete system specific rules in Org User Mapping Table
delete from <SCHEMA>.virsa_cc_orgusers
where vsyskey = '&1';
prompt Delete system specific rules in Permission Rule Table
delete from <SCHEMA>.virsa_cc_prmrule
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_supp_det
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_supp_hdr
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_supp_text
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_syscract
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_syshmap
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_sysrule
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_syssapobj
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_sysusr
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_textkey
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_usrmap
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_xsrulemap
where vsyskey = '&1';
delete from <SCHEMA>.VIRSA_CC_xsysgrp
where vsyskey = '&1';
prompt Delete System details
delete from <SCHEMA>.virsa_cc_system
where vsyskey = '&1';
delete from <SCHEMA>.virsa_cc_systemc
where vsyskey = '&1';
delete from <SCHEMA>.virsa_cc_systemt
where vsyskey = '&1';
commit;
prompt Truncating VIRSA_CC_GENOBJ Table
truncate table <SCHEMA>.virsa_cc_genobj DROP STORAGE;
prompt Truncating VIRSA_CC_GENOBJT Table
truncate table <SCHEMA>.virsa_cc_genobj DROP STORAGE;
prompt Truncating VIRSA_CC_GENUSR Table
truncate table <SCHEMA>.virsa_cc_genusr DROP STORAGE;
prompt Truncating VIRSA_CC_GENACT Table
truncate table <SCHEMA>.virsa_cc_genact DROP STORAGE;
prompt Truncating VIRSA_CC_GENPRM Table
truncate table <SCHEMA>.virsa_cc_genprm DROP STORAGE;
prompt Truncating VIRSA_CC_GPRMLIST Table
truncate table <SCHEMA>.virsa_cc_genobj DROP STORAGE;
prompt Truncating VIRSA_CC_SYSUSR Table
truncate table <SCHEMA>.virsa_cc_sysusr DROP STORAGE;
prompt Truncating VIRSA_CC_ACTVL Table
truncate table <SCHEMA>.virsa_cc_ACTVL DROP STORAGE;
prompt Truncating VIRSA_CC_PRMVL Table
truncate table <SCHEMA>.virsa_cc_PRMVL DROP STORAGE;
prompt Truncating VIRSA_CC_CRACTVL Table
truncate table <SCHEMA>.virsa_cc_CRACTVL DROP STORAGE;
prompt Truncating VIRSA_CC_CRPRMVL Table
truncate table <SCHEMA>.virsa_cc_CRPRMVL DROP STORAGE;
prompt Truncating VIRSA_CC_ROLEVL Table
truncate table <SCHEMA>.virsa_cc_ROLEVL DROP STORAGE;
prompt Truncating VIRSA_CC_CRROLEVL Table
truncate table <SCHEMA>.virsa_cc_CRROLEVL DROP STORAGE;
prompt Truncating Management Tables
truncate table <SCHEMA>.virsa_cc_MGALERTS DROP STORAGE;
truncate table <SCHEMA>.virsa_cc_MGCRTR DROP STORAGE;
truncate table <SCHEMA>.virsa_cc_MGMTBU DROP STORAGE;
truncate table <SCHEMA>.virsa_cc_MGMTTOT DROP STORAGE;
truncate table <SCHEMA>.virsa_cc_MGRISKD DROP STORAGE;
truncate table <SCHEMA>.virsa_cc_MGRISKS DROP STORAGE;
SPOOL OFF

Does migration assn't copy the system also

Similar Messages

Maybe you are looking for