Does Migration Licenses Include Upgrade of CUCM, UCCX, IMP, CUC?

Hi,
Does migration licenses include the upgrade of CUCM, UCCX, IMP and CUC from BE6K? The customer said that they currently have expired UCSS, but they purchased migrations licenses to v10.5. They purchased these items below. They are running v8.6 CUCM and UCCX 8.5.
MIG-CUCM-USR-B
Migration to UC Manager Enhanced - 1K - 10K Users
UCSS-U-UCM-B-1-1
UC Manager UCSS - 1 ENH User One Year Sub Tier B
CON-ESW-MIGCUC03
ESSENTIAL SW Migration to UC Manager Enhanced
MIG-CUCM-BASIC-B
Migration to UC Manager Basic - 1K - 10K Users
UCSS-UUCMBAS-B-1-1
UC Manager UCSS - 1 Basic User One Year Sub Tier B
CON-ESW-MIGCUCM0
ESSENTIAL SW Migration to UC Manager Basic

John
You don't need to pay any money for any major CUCM upgrade as long as you have active UCSS on it.  If as part of the migration to version 8.6 you purchased UCSS you are covered, otherwise you will need to pay for every major upgrade.
If you did buy UCSS then you can simply request the upgrade vie the PUT upgrade portal.
HTH,
Chris

Similar Messages

  • Does the license include both a desktop and  laptop installation??

    I have LR5 installed on my Mac Desktop and also want to install it on my Mac Air, does the license allow for this?

    Yes, assuming you have a perpetual licence, it allows this setup, as long as you do not use them both at the same time!

  • Does EBS license include tools for reporting and extracting data (queries)

    Hello,
    I'm recommending Oracle EBS to a customer and I need to mention what tools for reporting and extracting data (queries) are included in a Oracle EBS license.
    I hope you can help me with that information, or at least with providing me the place where I can get the info.
    Thanks in advance,
    A/P Sergio Maestri

    Hi,
    Thanks, I think the same ... but the customer asked me about it ... I supose my answer will be that he can use Reports Builder for reporting and Toad or PLSQL Developer to access to the database and make queries ...
    What about XML Publisher ? ...it can be used to make reports against an Oracle EBS database and integrate them into the EBS Application ?I believe you need a developer license to use Oracle Developer (Forms/Reports) for customizing/creating reports.
    Global Pricing and Licensing
    http://www.oracle.com/corporate/pricing/index.html
    And IINM, the same thing applied to XML Publisher -- See this thread for a similar discussion.
    eBiz & XML Publisher - Confusion
    http://forums.oracle.com/forums/thread.jspa?messageID=3834445
    Please contact your Oracle sales representative, he/she is the best one to answer such questions.
    Thanks,
    Hussein

  • I have adobe captivate on one laptop, I need it on another one as well.  Does the license include a second download

    How many computers can we have Adobe Captivate on with one license?

    A sinfle user license allows you to have the software installed and activated on two machines.

  • Does Standard Edition include a license to install Grid Control?

    Environment are some 10.2 Standard Edition RAC clusters... DB, CRS, listener, ASM with Database Control running on random nodes. I would like to know if the SE license includes the right to install and use Grid Control (instead of Database Control) to monitor the SE clusters? With GC I can have some failover with multiple OMS that I've used before to good effect, but I'm not sure if I can install it if this shop doesn't own EE licenses. Anyone know off hand?

    Doesn't this licensing info pertain to the (separate) Database used for Grid Control (OMS) repository only?
    To me the paragraph just says that you can use a separate host for Grid Control server, without licensing additional Database processors (as long as you stick to the Special-use requirements).
    So, what about license for Grid Control itself? (i.e. Management Agents, OMS, Management Repository, ...) I believe this was the op's concern. And what does "provided ... targets managed ... are correctly licensed." really mean?
    Perhaps the licensing details for e.g. Database and AS can provide some information, if related license includes the right to install and use GC to manage such installations and deployments.
    I believe a license is "included" as long as you have a license agreement in place for your other products. I think this was also discussed a few times earlier on oracle-l.
    Either way, as Hans says above, you need to verify this for yourself, for your business. (Implicit, heard-of license rights are a bit hard to prove.)
    I'd better add:
    Not all of the functionality of OEM Grid (or Database) Control is ok to use without purchasing extra options. Some of it are requires EE and Management Packs.
    Message was edited by:
    orafad

  • Does my full Creative Cloud License include Photoshop Elements?

    Does my full Creative Cloud License include Photoshop Elements?

    You can do everything in Photoshop that you can do in Photoshop Elements, but it may be a different method.

  • Why did iPad 3 did not get airdrop ??? I read on internet that it does not need hardware upgrade as it's a software... So y is this injustice? The specs of iPad 3 is better thn iPad mini.. Still y did apple not include this in ios 7 update of iPad 3?

    Why did iPad 3 did not get airdrop ??? I read somewhere on internet that it does not need hardware upgrade as it's a software... So y is this injustice? The specs of iPad 3 is better thn iPad mini.. Still y did apple not include this in ios 7 update of iPad 3? Disappointed . (Hope they give us an update with airdrop included..)

    AirDrop uses special technology that is only available in the newest generation of wifi/bluetooth radio chip in the latest iOS devices. Airdrop can actually connect between devices without technically being logged into a network. Only the latest chips support that tech.

  • Bootable ISO images not visible in PCD when doing Migration Task

    We are looking to move from CUCM 8.6 to CUCM 10.0 using Prime Collaboration Deployment. We have the full 10.0 media for CUCM and IMP. We created an ISO image of each and uploaded them to the /fresh_install directory on the PCD server. When creating a migration task in PCD, when we get to the point to select an image and click Browse, nothing is there. We also tried downloading the bootable 10.5 media from PUT. After uploading that media, this was visible, but the 10.0 image we made from the original CD was not.
    It appears PCD is doing some sort of validation check against the ISO. What can we do to ensure we create a valid image from the Disc so PCD can see it?

    Hi, Jack.
    I have the same question, could you provide more details? Thanks!
    Say, in the log I found this: The given directory was located and searched but no valid options or upgrades were available. Note, the system cannot be downgraded so option and upgrade files for previous releases were ignored.
    But this does not clarify the question.

  • User Migration Licenses from BE5000/CME to 9.X ?

    Hello All,
    I would really appreciate if someone can help me understand how does Cisco send the migration user licenses after purchase?
    here is a brief summary of what my customer is trying to migrate from :
    - Customer has a BE5000 site with some 7962 phones and another CME site with some 7962/7937 phones
    - from reading the ordering guide I see I can use the following part numbers to migrate from those sites to 9.X
    L-MIGB-UCM-UWL-PRO & L-MIGE-UCM-UWL-PRO
    - Both sites have had their equipment shut down more than 3 months ago so we have no access to those servers incase the process involves logging on those systems to migrate the user licenses.
    The question I have is if I order migration licenses via those part numbers, do cisco send a PAK key or will I need to run something on the old BE5000 or CME to be able to retrieve those upgrade licenses?
    Thank you

    Hi,
    what I understand that u are using BE5K with version 8.x on MCS 7828 or below and are upgrading to Call Manager version 9 on different platform[Virtualised] ?
    the Part codes mentioned say that u are migrating Basic & Enhanced Users to Professional Users and placing the order since u do not have UCSS contract.
    You will get the single PAK code for total number of users to be migrated and the same needs to be entered on www.cisco.com/go/license along with ELM file .This file u would get once u migrate successfully to version 9 [license MAnagement---Licenses --other fulfiment options--generate ,now copy from ELM and paste on license page]
    other way is write mail to [email protected] along with Sales Order Number  and License Count Utility [LCU report] taken from existing call manager version .LCU is downloadable from Cisco.
    regds,
    aman

  • Offline upgrade of CUCM 8.6 to 10.5 vNIC question

    Currently doing an off line upgrade of a customer CUCM 8.6 system.  After building the VMs using the 10.5 OVA template, we found that the software would NOT load as it would fail during install.  Root cause was tracked down to an issue with the VM NIC.  10.5 builds this nic as a VMXNET3.  It was necessary to change this to E1000 to get the software to load.
    Is it a problem leaving this as an E1000 vNIC going into production?  Or do we really need to back it up and rebuild it, or swap out the vNIC to have it be officially supported? 
    TIA
    Cliff

    Gack!!!!  Once again burned by obscure information being located in an unexpected place.
    The procedure to modify the vNIC is in there, but it didn't really address the install on the v10 OVA with older software.  I found I could change it to an E1000 type, install the v8 software, then use the procedure in the readme to modify it to the VMXNET 3 adapter type.  That, and the need for the COP to recognize the media as valid really should have been made a lot more obvious.
    Seems like it would be a lot simpler to just include the COP files you might need on the ISO image, but I guess that would create something else to manage they really don't want to.
    Thanks Chris!.

  • I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

    I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

    They will simply use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences. This is something you could do yourself. You would need a Firewire cable to connect between your old computer and your new one. Migration Assistant is installed in the Utilities folder of your new computer.
    See Transferring files between two computers using FireWire and How to use Migration Assistant to transfer files from another Mac.

  • Upgrade from CUCM 7.1.5 to 9.1 (No UCSS and ESW contract)

    Hi,
    we have CUCM 7.1.5 cluster (two servers) with no UCSS and ESW contract.
    What would be the best and cheapest way to upgrade to CUCM 9.1.
    We are planning to use our VMWare system and buy only CUCM 9.1 software (no servers).
    Can the current DLU's be trensfered or do we have to buy everything from scratch.
    Regards.

    For using Jabber mobile if you go with UCL - you wil need enhanced/enhanced plus. Or you can use CUWL std or pro both. Choose the licensing type based on your needs keeping in mind the future path of your organization. If you go UCL you will need to buy add on licenses for voicemail, webex etc. If you choose CUWL Professional for every user you buy one license - which enables them to use phone, voicemail, webex, jabber etc. Choose according to your needs, now is the time you can upgrade the licensing as you will benefit from discounted prices.
    Below tables show the details:
    Refer:
    http://www.cisco.com/en/US/prod/collateral/voicesw/ps6882/ps9156/product_solution_overview0900aecd806cc7a4.pdf
    Please rate all helpful posts and mark the thread as answered if this resolves your queries.
    Terry

  • How can I determine what sites are being referenced within Central Admin Upgrade and Migration Manage Databases Upgrade Status?

    When I go to Central Admin > Upgrade and Migration  > Manage Databases Upgrade Status, I have 2 content databases which have the status:
    Database is up to date, but some sites are not completely upgraded.
    How can I determine which sites are not completely upgraded?

    Manage Databases Upgrade Status will provide you all active and offline DB details, you can get same result
    using below PowerShell cmdlet.
    Get-SPDatabase and Get-SPContentDatabase will provide all active database/Content DB in Farm which include Service application db, central admin DB.
    Get-SPDatabase | Format-Table Name, ID
    Coming back to your question, if you find that there are some site are not completely upgraded then run below command and understand the cause if issue on specific DB.
    Test-SPContentDatabase WSS_ContentDB_Name
    If you find any missing file issue in DB then resolve these issue to upgrade content database.
    (verify all customizations referenced within the content database are also installed in the web application. This cmdlet can be issued
    against a content database currently attached to the farm, or a content database that is not connected to the farm )
    Use the Upgrade-SPContentDatabase cmdlet
    to resume a failed database upgrade or begin a build-to-build database upgrade against a SharePoint content database
    Upgrade-SPContentDatabase WSS_Content
    reference:
    http://technet.microsoft.com/en-us/library/ff607813(v=office.15).aspx
    http://technet.microsoft.com/en-us/library/ff607941(v=office.15).aspx
    If my contribution helps you, please click Mark As Answer on that post and
    Vote as Helpful
    Thanks, ShankarSingh(MCP)

  • Upgrade of cucm

    Hi everybody,
    I would like to upgrade my current cucm 7.1.5 to be6k 9.1.2 on new servers. First of all is it a recommended upgrade path using jump upgrade? On is it much safer to start a new clean installation?
    If i choose the jump upgrade i would like the license from my old cluster that will be converted to cuwl to be valid on the old cluster as long as i need to build configure the new cluster + the cuc. In term of software what i will need bootable cds etc ? Which is the safest path that you recommend?
    Regards
    Sent from Cisco Technical Support iPhone App

    Hello Michalis,
    As mentioned up here, you have two ways to do this upgrade. For me i tried both of them but from 7.1 to 8.6
    MCS to UCS.
    - you will need a fresh installation on UCS for 9.1.2 (with the same IP, Hostname, GW, NTP....etc of the running 7.1 cucm)
    a) Using BAT:
       * export your data from 7.1
       * Open these data again with BAT for 9.1
       * Restore your new BAT files to the fresh installed 9.1
       * Get the Lic MAC then make a licenese rehost by Cisco Licenses.
    b)Upgrade Files:
      *I think you won't find a direct upgrade file from 7.1 to 9.1
      *You will nees a temp server as transite ( let's call it server X) with the same IP, Host name, GW, NTP...etc
      * Install the same version 7.1 on the X server
      * Take a backup from the running server, then restore it to the X server
      * Upgrade to 8.5
      * Upgrade to 8.6 ( you will need a COP file forsure)
      * Then you can Jump to 9.1
      * Now Backup this transite server and restor on the fresh installed 9.1 on UCS
      * Licenses rehost is needed now.
    - You can make a test lap first before going to the cut off process. get some ip phones and check if they will work corectlly with the new 9.1
    - Cut off stage will be done and replace 7.1 with 9.1
    - no worries with VM, i already did that.
    good luck, and plese let me know the updates.
    Regards,
    Mohamed Helmy

  • License Included in UCM-7845-71-KIT

    Dear
    How can I know the License included on the Media Kit of the UCM 7.1 (2b)
    Know that the P.N of that product is
    UCM-7845-71-KIT

    Dear
    thank you again for reply
    I already have a lot of PAK code, but I don't know which PAK for NODE and which PAK for DLUs
    below is list of the PAK P.N that I have
    1         Unit    Include PAK Auto-expanding PAK for CUCM    CUCM-PAK
    1         Unit    Include PAK Auto-expanding PAK for IME 8.0    IME-PAK
    600     Unit    Include PAK Auto-expanding User for CUCM    CUCM-USR
    1         Unit    Include PAK Auto-expanding PAK for IME 8.0    IME-PAK
    1    Unit    TOP LEVEL SKU, UNIFIED CALLMANAGER SOFTWARE  SUBSCRIPTION    UCSS-UCM include the following:
              960    Unit    UC Manager Enh UCSS Less than 1K users - 1 user - 3 years    UCSS-UCM-3-1-A
              30    Unit    UC Manager Ess UCSS Less than 1K users - 1 user - 3 years    UCSS-UCM-ESS-3-1-A
              100    Unit    UCSS for UCM Pub user for three Year - 1 users    UCSS-PUB-3-1
    1    Unit    TOP LEVEL SKU, UNIFIED CALLMANAGER SOFTWARE  SUBSCRIPTION    UCSS-UCM include the following:
              100    Unit    UC Manager Enh UCSS Less than 1K users - 1 user - 3 years    UCSS-UCM-3-1-A
    Appreciate those information can help
    Message was edited by: Ahmed Samir Yousef

Maybe you are looking for