Does migration to CUCM 8.6 to 9.1 requires aditional Money?

Hi pals!
We just completed migration to CUCM 8.6 a year ago, we are now (we want to) moving to 9.1, we have a question, if it requires aditional money $$$$ (license), por for upgrade or just a minor patch.
Also.
Does it also requires CUC 9.1?
Does it also requires CUPS 9.1 too?
I just read the quick guide to migration and I have a loot of questions, my Cisco Parthner is really busy right now with another projects, so I Think i just get the point of this topic.
another BIG question.
When will version 10 be releaded (more less)?
I would better wait for version 10 instead version 9.1
Can you provide some interesting links?
I appreciate your time for your response, and I thank to you in advance.
regads.
john.

John
You don't need to pay any money for any major CUCM upgrade as long as you have active UCSS on it. If as part of the migration to version 8.6 you purchased UCSS you are covered, otherwise you will need to pay for every major upgrade.
If you did buy UCSS then you can simply request the upgrade vie the PUT upgrade portal.
HTH,
Chris

Similar Messages

Does Migration Licenses Include Upgrade of CUCM, UCCX, IMP, CUC?

Hi,
Does migration licenses include the upgrade of CUCM, UCCX, IMP and CUC from BE6K? The customer said that they currently have expired UCSS, but they purchased migrations licenses to v10.5. They purchased these items below. They are running v8.6 CUCM and UCCX 8.5.
MIG-CUCM-USR-B
Migration to UC Manager Enhanced - 1K - 10K Users
UCSS-U-UCM-B-1-1
UC Manager UCSS - 1 ENH User One Year Sub Tier B
CON-ESW-MIGCUC03
ESSENTIAL SW Migration to UC Manager Enhanced
MIG-CUCM-BASIC-B
Migration to UC Manager Basic - 1K - 10K Users
UCSS-UUCMBAS-B-1-1
UC Manager UCSS - 1 Basic User One Year Sub Tier B
CON-ESW-MIGCUCM0
ESSENTIAL SW Migration to UC Manager Basic

John
You don't need to pay any money for any major CUCM upgrade as long as you have active UCSS on it. If as part of the migration to version 8.6 you purchased UCSS you are covered, otherwise you will need to pay for every major upgrade.
If you did buy UCSS then you can simply request the upgrade vie the PUT upgrade portal.
HTH,
Chris

Migrating from CUCM 8.6 to CUCM 10.0 - Do I have to upgrade presence as well?

Hello Raees,
I've got a question regarding the Migration from CUCM 8.6 to 1.0, I went through the below "Ask the Expert" article.
https://supportforums.cisco.com/discussion/12103966/ask-expert-cisco-unified-communications-manager-cucm-version-100
My question is, the CUCM 10.0 upgrade mentions the following on page 22
"Refresh upgrade of Unified Communications Manager nodes only
Complete the high-level tasks listed in this section when you want to perform a refresh upgrade of only the
Unified Communications Manager nodes in your network. When you upgrade Unified Communications
Manager nodes without upgrading IM and Presence nodes, ensure that the installed version of the IM and
Presence Service is compatible with the new version of the Unified Communications Manager software."
I would only like to Upgrade the CUCM nodes but the client is using Presence 8.6 as well, would I have to upgrade Presence 8.6 to something else as well or can I just upgrade to CUCM 10.0 and the presence 8.6 would work with it, if I have to upgrade Presence as well then what version of Presence would I have to upgrade to and for the "Refresh Upgrade for Presence" can you mention the SKU that I got to get off the Product Upgrade Tool.
Since it's going to be a Refresh Upgrade for CUCM from 8.6 to 10.0 can you as well provide me with the SKU for the upgrade that I got to purchase, I can see two of them as follows:
UCM-10.X-SW-K9-XU=
CUCM Software Version 10.X for PUT Only, Export Unrestricted
UCM-10.X-SW-K9=
CUCM Software Version 10.X for PUT Only
Thanks
Aamer

Thank you for the reply Chris,
I have a few more questions with regards to what you mentioned in your reply, I'd be glad if you could clarify:
I have not dealt with IMP before...
1) is it like a plugin that runs on CUCM instead of a full fledged server or is it a stand alone server like CUPS (just renamed/rebranded).... I have till date been dealing with CUPS as a stand alone server that integrates with CUCM via the CUCM -> System-> Application Server Option.
2) If it's a plug-in then how would the upgrade be done from the CUPS Stand Alone to this IMP that runs within the CUCM Server or would it be a fresh installation or some activation of services within CUCM... and if it's a stand alone server then what Upgrade Image do I need to upgrade CUPS 8.6.4 to IMP 10.0 or 10.5.
I'm sorry but the upgrade path for CUPS 8.6.4 to IMP 10.0/10.5 is not clear for me, could you help me understand the migration for CUPS 8.6.4 to IMP 10.0/10.5..... could you as well advise any documentation that shows detailed steps for the upgrade from CUPS 8.6.4 to IMP 10.0/10.5... the CUCM upgrade is clear to me from the Upgrade Guide.
Thank you
Aamer

Does migrating data erase it from the source computer?

Does migrating data erase it from the source computer?

no, its in both locations
http://support.apple.com/kb/ht4889

Does Migration Assistant Have "Drive Options"?

We're planning on acquiring a new iMac this upcoming week, one the has both the 256 GB SSD and the 2 TB HD.
We want to use Migration Assistant in association with our current iMac which only has a 1 TB drive.
Question: does Migration Assistant offer the user choices of where the files from the old iMac are migrated to on the new iMac?
More specifically, we want to put the applications on the 256 GB SSD and all other files on the 2 TB internal HD.
Will Migration Assistant allows us to do this?

Have a read here http://web.me.com/pondini/AppleTips/SetupOther.html
Stefan

Does migration assistant move files or copy them?

I'm running Yosemite on a separate partition. I want to copy some of my information from 10.6.8, but I want to leave 10.6.8 intact, as it is still (and will remain for quite some time) my primary operating system. Does migration assistant move the information, or copy it?

It will copy info and won't delete anything from the originating drive. If you are just looking to copy some files, log back into the 10.6.8 and copy them to the user desktop account of the other drive.
If you are looking to migrate a user account, be aware that the account name will need to be different than the one you are currently using in Yosemite.

Does migration assn't copy the system also

does migration assn't copy the system also.

No. It is only for migrating user accounts and other computer settings. OS X must already be present.

I purchased an app, but it does not work. Can I cancel it and get my money back?

I purchased an app two days ago but it does not work. Can I cancel it and get my money Back?
I have in ipad2
Thank you

You can always try to contact iTunes Support:
http://apple.com/support/itunes/

Does the new Lithium polymer battery in MBP C2D require calibration?

Does anyone know for sure if Lithium polymer batteries require calibration?

It is best to calibrate your battery every 4 to 8 weeks. Do not calibrate any more frequently as that can also reduce your battery's performance. And no, this is specfic to Apple but with Lithium batteries as a whole.

Bootable ISO images not visible in PCD when doing Migration Task

We are looking to move from CUCM 8.6 to CUCM 10.0 using Prime Collaboration Deployment. We have the full 10.0 media for CUCM and IMP. We created an ISO image of each and uploaded them to the /fresh_install directory on the PCD server. When creating a migration task in PCD, when we get to the point to select an image and click Browse, nothing is there. We also tried downloading the bootable 10.5 media from PUT. After uploading that media, this was visible, but the 10.0 image we made from the original CD was not.
It appears PCD is doing some sort of validation check against the ISO. What can we do to ensure we create a valid image from the Disc so PCD can see it?

Hi, Jack.
I have the same question, could you provide more details? Thanks!
Say, in the log I found this: The given directory was located and searched but no valid options or upgrades were available. Note, the system cannot be downgraded so option and upgrade files for previous releases were ignored.
But this does not clarify the question.

HT4889 Am I wrong or does Migration Assistant not work in Mountain Lion (10.8.2) when migrating from a PowerPC running Tiger (10.4.11)? Apple really needs to get on the ball or face losing people buying their new desktop products.

The title alone speaks to my frustration about this issue.
Used the process that was recommended by Apple to migrate from my "Lampshade" iMac (PPC running 10.4.11) to the new iMac (Intel running 10.8.2) and I got bupkiss...
Just a spinning wheel (not beachball) and no drive recognized using Migration Assistant for both nor when using Target Mode on the iMac running 10.4.11 and Migration Assistant on the iMac running 10.8.2. Which is ironic, or more accurately oxymoronic, since the iMac in Target Mode (10.4.11) is recognized on the desktop of the iMac running 10.8.2 but not in the Migration Assistant. And before you can misdiagnose..it is not the Thunderbolt connection since I have the Apple recommended Thunderbolt to Firewire adapter and also used the Firewire 400 to 800 cable to expedite the transfer.
On a personal note...
I'm not bashing Apple for this...they are "head and shoulders" above the competition in what they do but I've been burned a few times so I feel I can share a small bit of loyal customer advice...I understand your iOS and mobile products hold huge sway in company focus and market-share but I find it a tad unwise to slack on the desktop applications. I don't recall any app for the iPhone/iPad family being made on the iPhone/iPad...only from desktop applications if I recall correctly. And how can I clearly "Move my Mac even further ahead" as your marketing states when I can't even migrate my files from my old Mac to my new one in a simple fashion as per your instructions?
I thank anyone in advance with an answer or even a workaround for this issue and please have a great day.

http://support.apple.com/kb/ht4889
Migration from Mac OS X v10.4 Tiger to OS X Lion
Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
On the Mac you want to transfer data from, Restart, and immediately hold the T key.
Wait for the FireWire logo to appear on the screen. If it does not, restart and try again.
Connect both Macs via the FireWire cable.
On the Mac you want to transfer data to, Open the Migration Assistant application.
Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
Select the option "From a Time Machine backup or other disk" and click Continue.
Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

After applying Hotfix 2910552,while doing Migration from Win XP to Win 8.1 got Error 800700C1

Hi,
I have two SCCM Lab. Both have same configuration and hotfix(2910552) installed.
I am doing hardlink migration from Windows XP to Windows 8.1.
In one of the lab migration from XP to win 8.1 have successfully implemented after applying the hotfix 2910552,and then after updating the Boot image. But i am getting issue while doing the same on my second lab. The error in log file is
Command line execution failed(0x800700C1)
Failed to install boot image,is not a valid win32 application
Failed to reboot the system(0x800700C1)
Thanks
Pallavi

Thank you for sharing the solution.
If your question was resolved/answered, you should mark the thread as "answered".
Then you should make e new thread/question for the new error you get. This will make it alot easier for other users, modetrators and Microsoft to help you. It will also make it much eaiser for othe people with the same issue to search the forums.
Thank you.
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
www.ronnipedersen.com/ and www.SCUG.dk/ | Twitter
@ronnipedersen

Cisco CallManager 5.1.3 Migration to CUCM 8.6

Hello
I am trying to migrate a Cisco Call Manager v5.1.3 to a new CUCM v 8.6 running on a VM.
I made a DSR backup from Call Manager v5.1.3 and try to install it in a VM running the same version (5.1.3) but I am receiving the following error message:
At least one of the servers which was requested to be restored is not connected: CUCMPUB. This may be due to Master or Local Agent being down., Restore Completed...
Any ideas about how to upgrade this server in a VM? I would not like to upgrade the production server...
Thanks in advance
Miguel Neira

Thanks for your response
The services are running...
Backup and Restore Services
Service Name Status
Cisco DRF Master
Running
Cisco DRF Local
Running

Does migrating database to 7.8 change the structure or ? of the database?

Good Morning Community,
I had migrated Maxdb Database from 7.6 to 7.8 and i realize the dbmcli connect to the database but he prints this error when i execute my usual queries:
ERR
-24988,ERR_SQL: SQL error
-4004,Unknown table name or unknown schema:FILIALEN
what's happen? i check with an other application it uses the java sap driver of maxdb 7.6 it works but the queries work for some privelege account not all the account those queries must work by all the account
Need Help to find out Maxdb 7.8

Why do you execute queries with DBMCLI ?
DBMCLI is a Database Management server CLIent.
For SQL queries, use SQLcli !
And based on the error message I've got the impression that you're logging on to the database with an SQL user that is not the owner of the tables.
Therefore, you're SQL statements (which we would have to see for more detailed analysis of your problem) would have to specify the schema of the tables you're selecting data from.
But all this has not changed from MaxDB 7.6 to 7.8!
The upgrade does not re-define your database contents.
regards,
Lars

Migration of CUCM and CUCX

I plan to execute an upgrade of CUCM and CUCX from version 7.1.3.30000-1 to a version 9.1.1.20000-5 (CUCM) as well CUCX 7.0(1)SR05_Build504 to 9.0.2.10000-71(CUCX) respectively on a VMware ESXI 5.0 . I will be grateful if someone finds a little time to help me to make the upgrade plan
Cisco unified contact center express
Current version :Cisco application administration-7.0(1)SR05_Build504
                  pakage cisco unified ccx premium
                  cluster default
New version: Cisco Unified CCX Administration
             System version : 9.0.2.10000-71
Cisco Unified Call Manager
Current version :sysystem version 7.1.3.30000-1
New version:system version 9.1.1.20000-5
Please check the snapshot of the current versions
Regards
Akhilesh Nambiyath

Since you're a partner you should be able to go here, then it's time to do some reading
https://communities.cisco.com/community/partner/collaboration/migration?view=overview
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Does migration to CUCM 8.6 to 9.1 requires aditional Money?

Similar Messages

Maybe you are looking for