Does "Military Grade Security" exist for WLANS

After reading about all the vulnarabilities of WLANS I am unsure if any are good enough. The latest is dynamic WEP, Temporal key integrity protocol, and Message integrity check. Are any of these good enough to use in a military application. Is EAP good enough.

This depands on what cyrptographic standards are required by the military application. For most highly classified applications the military requires its own non-commercial "type-1" cryptography to be used. There are specialist companies looking at integrating this technology into WLANs - contact your Cisco rep for details. For less highly classified material, most military applications require the use of an "approved" encryption algorthim. In Australia and the US, RC4 (the basis for WEP) is not approved for military use. The solution is to use IPSec, which uses DES, an approved algorithm, on top of WLANs ro provide the necessary confidentiality, authenticty and integrity. Typical deployment sceanrios include IOS/IPSec on routers for point-to-point links and the VPN3000 for client to base-station links.

Similar Messages

Does a weblogic.jar exist for client

Hello,
does a weblogic.jar exist for client, that is not so big?
thanks,
dorin

http://dev2dev.bea.com/resourcelibrary/whitepapersdetail.jsp?highlight=whitepapers&filePath=components%2Fdev2dev%2Fresourcelibrary%2Fwhitepapers%2Fwhitepapersmallfootprintclient.htm
Dorin Dragan-Sassler <[email protected]> wrote:
Hello,
does a weblogic.jar exist for client, that is not so big?
thanks,
dorin--
Dimitri

Does the photography cloud exist for students for a lower price? and what about updates?

Does the Photography-Cloud, including PS and Lightroom (12,95€ per month), also exist for students and pupil for a lower price?
Will the Photography-Cloud be updatet with any change on the programs?
Thanks for any answer.

Start here https://creative.adobe.com/join/edu
One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
http://www.adobe.com/products/creativecloud/students.edu.html
http://www.adobe.com/products/creativecloud/buying-guide-education.html
http://www.adobe.com/education/students/student-eligibility-guide.edu.html
ID Proof http://www.adobe.com/store/au_edu/academic_id.html

Does anyone understand Security settings for Portfolios??

Thanks, Philip, you answered part of my question. I'm still searching for a way to keep people from printing or editing my artwork I place in the portfolio I'm building in Acrobat. Anyone's help would be greatly appreciated. I can't seem to find any specific information, at least none I can understand, on this simple problem.
Using Adobe Acrobat Pro 9.1.3 on a Mac. Creating a portfolio of my artwork to either burn to cd or email. I want the recipient to ONLY be able to VIEW the artwork, not print or edit. I do not understand the Security settings, and I have read the section on Choosing a security method. Still confused. After going to File> Modify PDF Portfolio> Secure Portfolio..... what do I choose in all the Security settings? I'm sure some of the people viewing the portfolio will have a full version of Acrobat, and not just the reader. Please help or advise where I can find more online help for this simple problem. Thanks.
Bgin_Agin_OK

As for editing art work you can do the as I suggested with layer with Opacity set to 1% then Flatten That will prevent (Or should) the editing art work.
AS for locking preventing printing and editing You can set that inTools > Security settings (then password protect).
Note Security is fairly easy for anyone to evercome. There are bunches of programs out on the net to do just that.
Most Honest, Ethical, persons will abide. But there are I am afraid in today's world little of that left. So there is better than 50/50 chance your stuff will be swiped.I would not dream of doing such, except if it was one I created, I set password on, and forgot the password.
When I was growing up, when I was about 7, I picked up a pencil in a 5&10 cent store and when my mother found it when we got out the door she marched me back in , told me to give the pencil back, and applogize. Then when I got home my bottom was smoked. I still remember my backside smarting all these years. I would no more steal anything. than I would try to kill someone. Just not in my nature.
In todays world if a kid did similar, the parent is more likely shrug it off, or ask the kid how they got away with it , show and ask them how.
A sad comentary on the world.

How does the round robin work for WLANs in the WLC?

We recently added two more RADIUS servers in the enterprise for redundancy. Our main WLAN had only one RADIUS server for PEAP authentication. We have Prime configured to email us with mostly the default notifications. I recently started getting these emails:
I started digging into one of the controllers and I found these messages:
Notice how, if you start reading up from the bottom, you can see 10.2.80.201 failed to authorize user "unknown" and the controller then deactivated that radius instance and shifted to the next one. Then... after a while, another "unknown" user tried to authenticate, and again, the controller then abandoned that radius instance and then went to the next one in line. That process keeps repeating itself after it cycles through all three of the radius instances, then starts over.
Is this normal behavior, or do you know if I have misconfigured something?
Thanks in advance!

There can be cause to adjust the EAP timers....but check if you are set to radius aggressive failover or not.
show radius summary
Vendor Id Backward Compatibility................. Disabled
Call Station Id Case............................. lower
Call Station Id Type............................. Mac Address
Aggressive Failover.............................. Enabled
Keywrap.......................................... Disabled
Fallback Test:
    Test Mode.................................... Off
    Probe User Name.............................. cisco-probe
    Interval (in seconds)........................ 300
MAC Delimiter for Authentication Messages........ hyphen
MAC Delimiter for Accounting Messages............ hyphen
if you are, then one failure will cause you to move to the next radius index.
config radius aggressive-failover disable <-- three consecutive users need to be ignored by AAA before the next indes is moved to.
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

Does something like this exist for mac somewhere?

http://www.bitboost.com/pawsense/
I've recently gotten a cat that loves my desk and keyboard. I've had to resort to unplugging my keyboard whenever i'm not by it. While it isn't a big deal, i'd prefer it if i didn't have to. Is there something similar for mac?

yeah, i know that's an option too, but the problem is it doesn't work when i'm watching a movie or something full screen or have just stepped away from my computer for a second.

Does an upgrade still exist for iphoto '08 to '09?

I took RAW photos (.cr2) with my newish Canon G12, and iPhoto '08 can't interpret them, nor can the MacBook (early '08), currently running MacOS 10.5.8. I could of course upgrade to Snow Leopard, then upgrade to Lion, then upgrade to iLife '11, but I'd rather not spend the money on this aging system. Also, I'm in the middle of finishing a thesis, so I'm just a bit worried about stirring the pot. I have found the camera file update (v3.5) which should allow iPhoto to use the .cr2 files, but apparently i need Iphoto '09 for that. This single upgrade seems to be the best solution, but I just can't seem to find the old '09 for download...? Any suggestions are greatly appreciated. Cheers.

There is no iPhoto 09 to download. The only way to install 09 is from an iLife 09 install disk. You might get one of those on ebay.
Regards
TD

Does Hyperion Integration Server exist for AS400?

I need drill through to AS400. I have IBM Data warehouse 7.1 y db2 olap 7.1 on AS400, but sql drill through come with Integration Server.There are any way to install integration server on AS400??

Yes.. ShowCase is porting EIS 6.5 for the iSeries/AS400. It should be released by late Q3 2002. Check either with IBM or ShowCase (depending on where you got your DB2 7.1) for 8.1 availability

Does the app "ubersocial" exist for iPhone!

It is a twitter client suposively for blackberry, iPhone and web. I see it fir iPhone on their site but it is nit in the AppStore?

Ubercurrent is currently in the AppStore, it looks alot like ubersocial fir iPhone that is on their website. I'm confused as to why ubermedia doesn't state the status of this app fir iPhone. On their site it clearly shows "ubersocial for iPhone" they even have a link to the app in the AppStore but it doesn't work. So is it Ubercurrent or uber social?
Here is the link for ubersocial for iPhone. http://ubersocial.com/iphone/#
But it is not in the AppStore ??
Message was edited by: Michael0320

Does Oracle HTTP server exist for Windows Server 2008 64 bit?

Hello!
We are moving our database 10.2.0.4 from Windows 2003 32 bit to the new server Windows Server 2008 64 bit,
and I didn't search Apache on the companion disk.
Will it be released later?
What will be alternative?
Irina.

Hi
Did you find a solution to your question ? I am also looking for installing appex http Server on a W2008 X64 Server.
Thanks for a answer.
Matthias

Does 2GB ram stick exist for iMac Intel Core Duo?

looking to max out my iMac on Ram (at least 2GB) as i Find it real slow with the 512MB it comes standard with.
1) Is my only option to buy 2 x 1GB or is there a 2GB stick on the market?
2) If going for the 2 x 1GB am I going to see a significant difference beyond just having the standard 512MB paired to a new 1GB?
Thanks

I bought 2 1GB sticks of Ram, installed them... ran my iMac 20 Intel core duo, then went to 1.5 GB of RAM. Honestly, I don't see the advantage of going to 2 GB. Personally save yourself the $$$ and wait about a year or 2 then upgrade. I am returning 1 stick which I paid 109 for. BTW Fry's electronics has Corsair 1 GB PC5300 sticks for 109.00 with a 20.00 rebate. Cosair if definitely a name you can trust.
Personally 1.5 GB is te magic number.
To comment on GLO's comment about pairs: There is no reason to match your memory. These iMac's do not run in dual channel mode. I contacted AppleCare and was told that there is no advantage running paired sticks of memory on the new machines.

I use photoshop elements version 11 and just bought a nikon d750. Photoshop elements can't open/read the raw/NEF-file. Does a photoshop elements raw converter exist for Nikon d750 ??? And where can I get it ?

I use photoshop elements version 11. I just bought a nikon d750. Photoshop elements can't read/open the raw/NEF-file.
Does a raw converter exist for this camera and where can I find it ?
Thanks for any help.
erwing97792269

You need Adobe camera raw version 8.7. Unfortunately your software pre-dates the camera. ACR 8.7 is only compatible with PSE13. But it is possible to download and install the free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.7
Mac download (.dmg file) click here DNG Converter 8.7
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

Node id does not exist for the current application server id

Hi gurus,
when i start application services (adstrtal.sh) i encounter the following error: Node id does not exist for the current application server id.
i executed the command select server_id from fnd_nodes and had the following output
SERVER_ID
991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
i also checked the .dbc files under $FND_TOP/secure, there were two HOSTNAME_SID.dbc files (IPPDDVP_VIS.dbc and ippddvp_vis.dbc) with different APPL_SERVER_ID
ippddvp_vis.dbc == 9827D18C8C2E8816E043C0A86452881611641850934523625093287478849136
IPPDDVP_VIS.dbc == 991D192B1CFC10F2E043C0A8645210F226563381082071204628231314463687
Please help me out.
thanks.

i cleaned the FND_NODES TABLE as per metalink note 260887.1. i run autoconfig on db/apps tier. Now when i start the application, i encounter the following error:
applmgr >./adstrtal.sh apps/apps
You are running adstrtal.sh version 115.19
Executing service control script:
/dvp2/product/viscomn/admin/scripts/VIS_ippddvp/adapcctl.sh start
script returned:
adapcctl.sh version 115.55
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener is not running.
Starting Apache Web Server Listener (dedicated HTTP) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
Apache Web Server Listener (PLSQL) is not running.
Starting Apache Web Server Listener (dedicated PLSQL) ...
Cannot reconnect to gateway
Cause: Application Object Library is unable to reconnect to your gateway ORACLE account after you unsuccessfully attempted to sign-on.
Action: Check that your gateway environment variable is set correctly.
adapcctl.sh: exiting with status 0
.end std out.
.end err out.
please what should i do next to resolve this problem.
thanks

OTL Error - Hrs - Element link does not exist for the duration of the entry

Hi,
We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
I have re-run the security list generation (we are using static list).
The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
We are using 11.5.10.2
Thankss

Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

My ipod wont let me buy any apps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

my ipod wont let me buy any appps because it says i have an invalid security code for my moms credit card but its the right one. and it also says i owe money for upgrading an app does anyone know how to remove my moms credit card cause i cant figure itout

To change asccount information see:
Changing Account Information
For the code issue this may help.
iTunes Store: My credit card's security code or zip code does not match my bank's records
For a standard iTunes account you need a valid payment method even for free apps and app updates.
What is making it think that you own money for an app upgrade?

Does "Military Grade Security" exist for WLANS

Similar Messages

Maybe you are looking for