Does MMX400R wifi pocket router support for iPad?

I'm using iPad wifi module.  I'm planning to purchase MicroMax pocket router 400R. I just want to know the pocket router will support iPad.

no i don't think it does wps. but i think you can still configure the wireless router with the ipad. if you connect to it, just type in the gateway address into safari, logon, and configure
uncle_tungsten wrote:
Sorry, I left out an assumption.  The router has not been configured; there is no configured SSIS, username, or password.  The wireless router requires an Ethernet connection be made with a PC, to connect to the IP address of the router and configure it.
   In my case, I want to configure without using a PC.  The router supports the WPS protocol which does not require configuring the SSIS,username, password.  My question was whether the iPad supports that protocol.  Then, I should be able to enable WPS and click the WPS start button on the router.  The iPad should then connect.

Similar Messages

  • How  to   find  article based  support  for  ipad  or  technical notes

    how  to   find  article based  support  for  ipad  or  technical notes

    The problem comes from VBUK/VBUP which are the control tables for most of SD tables (from VBAK/P to LIKP/PS and VBRK/P) and manage uniqueness of id in the module (and stores statuses). Even item tables don't refer to their header but both refer to the same VBUK record.
    e.g.
    LIPS : VBELN/POSNR -> VBUK/VBUP -> but you will only find LIKP/PS itself and no record in VBAK/VBAP
    LIPS : VBELV/POSNV -> VBUK/VBUP -> you should find VBAK/VBAP
    The table VBFA "Sales Document Flow" manages the relations from/to between two different SD documents which exist in VBUL/P and in only one other table depending on type of document. (Also note that the exact relationship may sometimes be modified to some extent by Customizing SD.)
    As Katan wrote, look for views defined in ddic, look also at logical databases (SE36) like VLV.
    You can also find valuable information in OSS notes/documents like 185530 - Performance: Customer developments in SD.
    Regards,
    Raymond

  • HT3702 why does Apple not go through PayPal for ipad game purchases?

    why does Apple not go through PayPal for ipad game purchases that are in your PayPal bank account? Not everyone uses credit cards

    The iTunes Store does allow purchases via PayPal, but only in the US. If you're in another country, PayPal is not available as a payment method.
    Regards.

  • Is there a list of apps with Airplay support for iPad 1 (drawing apps in particular)?

    I'm interested in a drawing or painting application that supports Airplay for iPad 1 in hopes to use the iPad as an electronic chalk board when coupled with a big TV. iPad 1 does not support Airplay Mirror so the app itself has to be able to stream screen content (just like iTunes for music on iPad 1). Have been searching for hours. None explicitly say that they do and I can't just buy every application until I find one that suppports airplay. Any suggestions would be greatly appreciated.

    I have some bad news for you. Of the very few drawing (including even photo retouching apps like iPhoto) apps that do support TV out are either iPad 2+ only (iPhoto) or while supporting wired external monitor connections, don't support the same over AirPlay.
    The closest hit is ArtStudio for iPad. On my iPad 1, it works just great over VGA / HDMI (that is, over wires) but not AirPlay. None of the other drawing apps I've tested (ArtRage, Draw! etc.) support external wired monitors, let alone AirPlay ones. iPhoto, in addition to not being a truly painting / drawing app, only shows  the results of operations, not even the interim state and is, therefore, completely useless. (And it's iPad 2+ only.)
    All in all, upgrade to iPad 2/3 and use AirPlay mirroring.

  • Does anyone know if the ZaggMate for iPad 1 will fit an iPad 2?

    Okay, so I didn't wait and bought my iPad in January (bought all my college texts as ebooks and they are on my iPad). I bought a Zaggmate keyboard/cover for it.
    http://www.zagg.com/accessories/zaggmate-ipad-case
    I was debating on upgrading to an iPad 2, but I don't want to buy a new Zaggmate if they are compatible....though the website is listing 2 separate "with keyboard" options for iPad 1 and iPad 2.

    Zagg's official stance is no..
    Will my original ZAGGmate work with the iPad 2?
    The original ZAGGmate was only designed to work with the original iPad. Because the outer dimensions of each iPad version are different from one another, the iPad 2 will not fit securely into the original ZAGGmate. While the ZAGGmate does work with most Bluetooth® devices, we do not recommend using it with your iPad 2.

  • Where does a developer download iOS5 beta for iPad?

    I'm a developer, but where exactly do I download iOS5 beta for iPad? In the Dev Center I only see the SDK for 4.3. Thanks.

    Thanks, I wanted to make sure. Many people mistakenly think that the iOS betas are available to the public or non-paid developers. If you can't find the beta, I'd suggest you ask for pointers in the developer forums:
    http://developer.apple.com/devforums/
    and if you can't get help there contact Apple Developer Support. We're really not allowed to discuss any specifics about unreleased Apple software in these public forums.
    Regards.

  • Why does my download of iOS 8 for ipad keep timing out?

    Why does my download of iOS 8.1 upgrade for ipad keep timing out? tried it about 20 times.

    When downloading, did you login to the Exchange?
    Did you add it to My Widgets in the Widget Browser with the button in the bottom right hand corner of the widget browser?
    There is more info about the widget here http://www.html5video.org/kaltura-html5/
    Which version of DreamWeaver are you using?
    Is your document whre you want to insert it the right doctype for it? Ought to be <!DOCTYPE HTML>
    And, are you fully update to DraeamWever 11.0.3.4964?
    Message was edited by: Nini Tjäder

  • Does Aironet 1100/1120/1130 support for IPv6 ?

    Experts,
    I find much document, but not found information about whether those support for IPv6 e.g. dual-stack like newer series.
    Has anyone used to test on those?
    Thank you in advance for any info,
    Nipat.p

    Hi,
    When working with WLCs if you are running code 7.2 you will be able to support IPV6 but this code is only supported by the latest model of WLCs and the APs that are supported under this code.
    On previous WLCs models that support up to code 7.0, the WLC only handles IPV6 pass through after code 6.0 since it does not support native IPV6.

  • Why does MSI P4N have no support for Intel Preslor and Asus Nforce 4 does??

    Well as you've probably guessed it im new to the forums (howdy all  ). I currently own a MSI P4N diamond motherboard and quite frankly i most dissapointed with what has been called (by too many reviewers) a great board.
    First off i see very little changes taking place with each bios update, of which does not seem to happen regularly at all. (lets face it no board is perfect especially the Nforce 4 range from MSI for Intel CPU's).
    Secondly overclocking a Pentium D 830, which i may add should be capable of overclocking very well on an Intel Nforce board, can barley reach 3.4 Ghz (i know its mobo issue as the CPU is water cooled and overclocks to way beyond 3.7 on an 955X board).
    Thirdly the North bridge fan was poorly stuck on my motherboard in that on installing my motherboard into my case it popped off like the lid of a pringles tub by a slight movement of my hand  .
    And last but least... why does the MSI P4N diamond motherboard not support Intels latest 65nm CPU's when ASUS's and Gigabyte's Nforce 4 motherboards work well with the Pentium D and the 65nm range of Intel CPU's. Upon also reading about the next gen of Intel CPU's the Conroe, the 975X motherboards will support the future CPU via a bios update and it has been said that the same is likely to happen for the Nforce 4 range... however once again due to the lack of support for the MSI P4N diamond by MSI i believe all of us owners of this pathetic (an over statement really but its going to be that way if MSI keeps this up) over hyped motherboard will get a simple NO in the CPU support table for the next gen range of CPU's.   
     

    Where did you get the information regarding the MSI P4N diamond's release date?
    Are you in the United Kingdom? As it was released at the same time as the other Nforce 4 boards here (i was on the edge of my seat waiting for the Nforce boards to be released on overclockers.co.uk for sale) In the end though i bought my mothreboard in October, which is a good few weeks after release.
    Is there any kind of SLI 32 on MSI's plans? this is what worries me as they have made a move in the 975X department but have not made any further developmentes in the Nforce range for Intel, which to the average joe kind of indicates loss of intrest in this field from the company.
    I am overall pleased with my motherboard, when using a single core CPU, as overclocking was a sheer joy, but as soon as the dual core CPU went in the mothreboard behaves like a drunk man coming from a pub. I am aware that the Nforce 4 chipsets struggle with the dual core CPU's but surely Nvidia were informed by Intel about the dual core CPU's being released in the future.

  • Does intel latest  mother boareds support for the Solaries 10 OS

    Hello Friends this is Mr.MA.Prakash from India. I want to know intel latest mother boards not supporting solaries 10. i tried installing on some intel mother board numbers.
    please suggest, which intel latest mother board support for the solaries 10 operating system.
    thanking u.
    ma.prakash.

    I've had a fun time last week setting up an Intel MFSYS25 blade server and MF5000SI quad-core Xeon blades with Solaris 10.
    I only had Solaris 10u4 (8/07) on hand, and it only worked in 32-bit mode (boot with kernel/unix explicitly specified, as in Safe mode descriptor).
    However adding patches (back from Jan 2008) helped, and the system works fine in 64-bit mode.
    I believe it should work with Solaris 10u5 since it includes these patches and newer ones, but haven't checked.

  • Preview on Device support for iPad

    I've just created our custom Adobe Content Viewer for iPad with new Viewer Builder and installed new tools and folio builder. From my understanding i need some third party app, which will allow me access files on iPad - i'm using PhoneView. So, my setup is that PhoneView is running, custome Adobe Content Viewer is running in foreground on iPad, but Folio Builder panel still don't offer me "preview on iPad". What i should do for enabling this feature? And yes, i'm on Mac...
    Thanks for help

    Hm, seems that statement "However, Preview on Device for the iPad requires a third-party utility such as Phone Disk." should be more like "However, Preview on Device for the iPad requires a third-party utility Phone Disk." - with this utility i can make preview on device working, when i'll set connection root for Adobe Viewer.

  • What are the optimum wifi router settings for ipad mini

    My new iPad Mini WiFi access is really slow on my home WiFi network.  All my other WiFi devices are working fine.  I have a D-Link DIR655 Wireless Router - What are the optimum router setting to ensure compatibility with the iPad?

    I'm having the same issue with a TP-LINK router.

  • HT4623 Does apple offer any "trade-in" for Ipad 1....are we stuck forever at OS 5.1?

    Does Apple offer any trade-in value for those of us early-adopters who bought the first version of ipad???    Are we forever stuck at OS 5.1 as OS 6 is not supported on the original Ipad?  

    Your only option is to sell the iPad and buy a new one.
    How to Sell Your Old iPad  http://tinyurl.com/85d69lk
    Other sources to sell.
    eBay Instant Sell http://instantsale.ebay.com/?search=ipad
    Sell and Recycle Used Electronics - Gazelle http://www.gazelle.com/
    For instant gratification in selling a used iPhone or iPad, Gazelle’s Gadget Trader, an iOS app, is tough to beat. In seconds it detects the device and reveals how much it is worth in good condition. Tap the Sell This Phone to Gazelle button and the deed is done.
    Sell Electronics for Cash - Next Worth  http://www.nextworth.com/
    Buy My Tronics  http://www.buymytronics.com/
    Sell Your iPad http://www.sellyourmac.com/mac-product-guides/ipad.html
    Totem http://www.hellototem.com/
     Cheers, Tom

  • VGA Adapter no longer Supported for iPAD

    VGA Adapter no longer supported. I have an iPAD 1 which i use for business to do presentations. Since upgrading the VGA adapter no longer works. What are my options to correct this issue?

    I have used Keynote to present presentations at customer sites and conferences via the VGA Adapter, a VGA cable and projector. This is the only application that i used the adapter for. I recently upgraded to v5.1 and the first presentation i did since the upgrade was Wed, May 2, 2012 where i was embarrised to find it no longer worked in front of a large number of customers. A little warning would have been helpful.

  • What is the cheapest way to get wifi in a home for Ipad mini - if we already have internet (but no wifi setup)

    Trying to get my sister set up with wifi.  She is getting an ipad mini for Christmas and has internet, but no wifi.  Is there any restriction on the Airport version that this ipad mini will/won't work with?
    I have found many 'used' Airport Express units on Amazon, but just need to make sure that these older models will work with this new ipad mini for her.

    I don't use Facetime, but if it is available on the Internet, she will be able to access it by entering the Web address for the site in the browser of the iPad.
    I just need something inexpensive since we are having to 'add that' for her.
    Since you are familiar with Apple products, the Express would make sense.
    The setup of the Express will very easy from the iPad. Look for the info in this link about Easy Setup:
    http://www.apple.com/airportexpress/#setup
    You can download a manual for the Express Model A1264 by using the link below:
    AirPort Express 802.11n (1st Generation) - Setup Guide

Maybe you are looking for

  • Has anyone had any success in correcting Maps mistakes?

    On multiple occasions I've submitted a correction using the function within Maps to report errors, but nothing is ever done.  Has anyone ever had any success in getting Apple's attention and getting something fixed?  Or is the submitting a correction

  • How to define categorywise charge account in Inventory or Purchasing respon

    Hi Oracle Gurus, Please advise on below Query: while raising PO, if we select item in puchase order system automatically defaults material charge account from organization parameters. my requirement is: I want to define charge account sepeartely for

  • Extending one Region Controller but need hold button id in Another Region

    Hi All, I am extending one Region() Controller.But i need to get control to a Button in a different region(Page Button Bar: (EffDateFooterRN)). I tried to use PageLayoutBean as well as OASubmitButtonBean but it is returning null. Can anyone help on t

  • Need Expertise Advice

    Hai, IDOC to JDBC (Staging table) IDoc is pushed in to XI. XI maps IDoc to staging table structure XI does the look up of other database tables while mapping.           How to do the database look up??? XI inserts data in to staging table with the st

  • Syncing bookmarks question?

    When I first got my iPhone, I synced my IE bookmarks. After that, I left it unchecked. I noticed today that the IE bookmarks were gone. If I do a snyc without bookmarks being checked, does it remove my bookmarks? I saw no need to sync them every time