Does MS outlook 2007 in client machine is recommended in Exchange 2010

Hi All,
We have a users who uses an outlook via citrix. The outlook clinet on citrix servers is 2007 SP1 and recently there is an upgrade at Exchange server from 2007 to 2010 and all users mail boxes are upgraded to Exchange 2010. After upgrading users mail box to
2010, there are many issue like
1. Outlook takes more time to load for few users.
2. Gets a pop-up "trying to connect to Exchange server".
3. Due to this, performance of citrix becomes very slow. Citrix works fine once outlook closes.
4. Another strange thing.....there are 2 mailboxes under Exchange 2007, when we send an email from these mail box the mail shows in Outbox but mail got delivered recipients and will not show up in Sent mails.. :(
Could you please give me some suggestions.

For 1-3 problem, you may try to run Outlook in safe mode ("Outlook.exe /safe") without Anti-virus running and check whether the performance of Outlook against Exchange in Citrix platform is fine. If the problem is not caused by client, I think there might
be something configuration problem on Citrix or Windows Server site.
Here is a discussion thread with the same topic from Citrix forum
http://discussions.citrix.com/topic/310220-poor-performance-on-new-xenapp-farm/
For the Question 4, please check the following Outlook option to check the result.
File > Options > Mail tab > Save messages section > tick the option "Save copies of message in the Sent Items folder"
Tony Chen
TechNet Community Support

Similar Messages

Remove Last Public Folder Database / Impact on Outlook 2007 - 2013 Clients ?? / Exchange 2010

Hello together,
we have an Exchange 2010 SP3 UR5 Infrastructure. Now the end is in sight for Public Folders :)
We want to Remove our Last Public Folder Database on our Organization.
How can i get this managed and what is the Outlook 2007+++ Client Impact on this Action ?
The Plan is:
Remove all Public Folder Content
Set the OAB to Web Distribution Only
Clear the “msExchHomePublicMDB” attribute on Exchange Databases
Clear the “siteFolderServer” attribute on CN=Exchange Administrative Group (FYDIBOHF23SPDLT)
Remove the Public Folder Database with ADSI
Is there anything else to do ?
Is there any Outlook Client Impact on this ? Does the Users get a Outlook Error like "your exchange administrator did some changes please restart" or is it transparent for the users ?
thanks for Feedback,
Best,
Martin

Hello,
Please follow the Naren.Neelam's suggestion.
Besides, I recommend you remove database via EMC or EMS. If you can't remove the database via EMC or EMS, and then you can use ADSIEDIT to remove the public folder database from the organization.
When you remove a public folder database, the Exchange database (.edb) file for the database and other files associated with the database aren't automatically deleted. You must delete the public folder database files manually.
Here are some articles for your reference.
http://technet.microsoft.com/en-us/library/dd876883(v=exchg.141).aspx
http://exchangeserverpro.com/exchange-2010-remove-public-folder-database/ (Note: Microsoft
is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please make sure that you
completely understand the risk before retrieving any suggestions from the above link.)
Cara Chen
TechNet Community Support

Outlook 2007 cached mode not working for old exchange 2003 users

For some reason outlook isn't receiving emails straight away when in cached mode for users which we moved (few years ago) from exchange 2003 to 2007 (we now have everyone on exchange 2010). I checked the security tab in AD and compared new and old users
and the permissions are completely different.
Creating a new AD account and linking the old email account to it, fixes the issue but that's not really an option for over 100 users.
Has anyone else had this issue?

Hello,
What's the difference between the permissions?
Can the users receive emails from OWA?
In addition, please make sure your Outlook 2007 has installed the latest update. And try to use
outlook/cleanips and check if it helps. See:
http://support.microsoft.com/kb/968773/en-us
Best Regards,
Steve Fan
TechNet Community Support

How to Get Outlook Client Version for MAC from Exchange 2010

Hi,
I want to know how many users in my organization are using Outlook for MAC or Email for MAC. What is the best way to extract this information from Exchange 2010 server. I can read the RPC Client Access logs by running logparser:
logparser.exe "SELECT distinct extract_suffix(client-name,0,'=') as User,client-software,client-software-version as Versio
n,client-mode,client-ip,protocol from 'D:\RPC\EXTC03\RCA_2014*.log' WHERE (operation='Connect') GROUP BY User,client-software,Version,client-mode,client-ip,protocol ORDER BY User" -nSkipLines:4 -i:CSV -rtp:-1 > D:\RPC\EXTC03\EXT
C03.TXT
How to extract Outlook for MAC clients from this command?
Hasan

Hi Hasan,
As far as I know, Outlook for Mac (Office 2011) uses Microsoft's EWS (Exchange Web Service). So you probably need to collect and focus on EWS logs, not RCA.
Anyway, Karl is right that you'd better post your question in our Exchange forum, where you can get more experienced responses:
https://social.technet.microsoft.com/Forums/exchange/en-US/home?category=exchangeserver
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Migrate client data from Notes to Exchange 2010

Hello!
We have no administrator access to Lotus Notes server and therefore we want to perform the client data (mails and contacts) migration. We need to move the mails
from Notes (8.5) to Outlook (2010 or older which will be connected to Exchange 2010).
Question: is it possible to do it without purchasing additional migration software? If yes, then what is the best way to accomplish this?
Thanks!

DAMO 8.0.2 supports Outlook 2007
It is available in two places:
(1) The IBM Passport Advantage Website.
(2) Located on the Lotus Notes "All Clients" CD in the Apps folder.
Is there an 8 release of Domino Access for Microsoft Outlook?
https://www-304.ibm.com/support/docview.wss?dc=DB520&rs=3025&uid=swg21265830&context=SSPQ69&cs=UTF-8&lang=en&loc=en_US&rss=ct3025lotus
MCTS: Messaging | MCSE: S+M

How to force Outlook's Junk email fitler to not filter Exchange 2010 SP1 accepted domains?

Hello,
I wonder if there really is no way how to reach the result described in the title question. Because
http://support.microsoft.com/kb/2458522 says:
This issue occurs because of a functionality change that is introduced in Exchange Server 2010 SP1. In Exchange Server 2010 SP1, domains that are configured as accepted domains are no longer allowed in the junk email lists of a mailbox.
So please tell us Microsoft how can we force Outlook to accept internal domain as a trusted senders and not apply Junk email filter on it?
There was already a long discussion about the steps here
http://social.technet.microsoft.com/Forums/en-US/outlook/thread/15f857c6-0ed4-4004-9d90-cb5d16361752 so please don't offer anything described there.
Thank you,

Trying to deal with the Outlook Junk Email Filter is not very easy and had been a pain in the butt.
The ONLY way to ensure the Outlook 2010 Junk Email filter honors "white listed" emails is to stamp the email with SCL -1. Setting a transport rule will do that but it is not very flexible.
I was able to resolve these issues by simply enabling the Exchange 2010 Anti-Spam agents on each hub transport server. We have no Edge Server but we use a couple of Ironports at the gateway which provide the bulk of AntiSpam. We didn't think we would
need the Exchange AntiSpam so we hadn't initially enabled. After months of trying to resolve people's complaints of emails from internal system ending up in Junk, this solution worked for us.
This is the order in which it was done.
1. We set the receive connectors for the internal systems for bypassing Anti Spam. We basically have 2 receive connectors, one for internal system with no relay, and one for internal systems who are allowed external relay.
Get-ReceiveConnector "server\name of the recieve connector" | Add-ADPermission -User "“NT Authority\Anonymous Logon” -AccessRights ExtendedRight
-ExtendedRights ms-exch-bypass-anti-spam
Note: If you use SMTP Authentication, Exchange will only mark the emails as "Internal" and not assign a SCL of -1. It can only be on anonymous connections.
Note: We have a separate receive connector for the Ironports delivering external email that will not bypass Anti-Spam. These emails will receive a SCL rating of 0-9
2. We set the global SCL to 6 (default is 4). You can set it to whatever you want.
Set-OrganizationConfig -SCLJunkThreshold 6
So basically, any email tagged with SCL 7-9 will be moved to Junk by Exchange.
3. Set-ContentFilterConfig -SCLQuarantineEnabled $False -SCLDeleteEnabled $False -SCLRejectEnabled $False
We don't want delete, reject or quarantine anything on Exchange. Just move email to Junk folder if SCL 7-9 and have user deal with it.
4. Set the Internal SMTP Servers by adding each Exchange server's IP Address to the Global Transport Settings. I used EMC, Organization Config, Global Settings, Transport Settings properties, Message Delivery tab. Do NOT add any other "internal" servers
here, only the Exchange servers.
5. Then we installed the AS agents on each HT Server.
Starting with the first server
Stop MSExchange Transport service
D:\Program Files\Microsoft\Exchange Server\V14\Scripts>.\install-AntispamAgents.ps1
After installation, disable all the agents except for Content Filtering Agent. This agent has to be enabled for Exchange to stamp the email with SCL -1. I used EMC, Organization Config, Hub Transport. You will see a new tab called Anti-Spam. Disable everything
except Content Filtering.
Start MSExchange Transport service.
Repeat on each HT server. (You won't have to repeat the disabling of the agents as that is a global setting)
6. You can add global safe senders by doing the following.
$list = (Get-ContentFilterConfig).BypassedSenders
$list
$list.add("[email protected]")
$list.add("[email protected]")
Set-ContentFilterConfig -BypassedSenders $list
The message headers are stamped with
For emails sent through the Internal connector
X-MS-Exchange-Organization-Antispam-Report: MessageSecurityAntispamBypass
X-MS-Exchange-Organization-SCL: -1
OR
For external emails from a safe sender
X-MS-Exchange-Organization-Antispam-Report: ContentFilterConfigBypassedSender
X-MS-Exchange-Organization-SCL: -1
OR
For all other external emails
X-MS-Exchange-Organization-SCL: 0
Good Luck. This has basically stopped all the calls about "legitimate" email in Junk Email folder.

Outlook 2013 - Lost Ability to Send Text Messages - Exchange 2010

Hi Folks,
I have an exchange 2010 server that has been up and running for 3+ years. I use MS exchange and Outlook 2010/2013 for receiving and replying to text messages on an Android based phone.
Without upgrading or changing anything, this past week one of my Outlook 2013 clients lost the ability to send or reply to text messages. In Outlook under "Home:New Items" the "New Text Message" option was gone. The exchange account was
still receiving text messages that were sent to the phone. But when I hit reply it said account not setup.
I checked on another computer with an Outlook 2013 client, and it still had the option for "New Text Message". I contacted Outlook support, and they just wasted 45 minutes of my times and said they can't help because exchange was involved.
Now several days later, all my clients have lost the option of "New Text Message". It's not greyed out from the list, it's gone.
Thanks for the help!
Dave B

I recommend that you post this in the Outlook Forum: http://social.technet.microsoft.com/Forums/en-US/outlook/threads
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Keep exchange 2007 Hub transport & CAS during migration to Exchange 2010

Hello,
during a migration from exchange 2007 to exchange 2010 is it supported to keep the old exchange 2007HUB and CAS in charge of the outside mail flow (send/receive) and OWA service.
Here is the scenario :
Actual OWA url : https : // webmail . compagnie . com (2007)
Future OWA url : https : // owa . compagnie . com 2010)
Keep the old url accessible for the users which have not be migrated to the new exchange 2010 MBX server.
Indicate to the migrated users to use the new url instead of the old one.
Keep the old hub transport server (2007) handle the mail flow (send/receive) to the outside.
At the end, when all the users will be migrated, configure the new 2010 Hub/cas to handle the mail flow (send/receive) to the outside.
Thanks a lot for your answers.
David

Thanks for your answers.
So if I have understood right, the only thing I have to take care about (in order to let the 2007 cas/hub server handle the external mail flow (on which the MX is bind) until all mailboxes are migrated) is to add the 2010 cas/hub server in :
Organization Configuration ---> send connector ---> Actual 2007 send connector --> Source server
Thanks a lot.
David
That will take care of the outbound message flow, yes.
Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Configuring Internet email, Hub transport, Client access (POP/IMAP) in Exchange 2010

Hi,
I was trying to configure Exchange Server 2010 for sending email to outside of the domain. For example I want to
send email from Exchange to Gmail. More over I also like to know how to enable Client Access
POP and IMAP in exchange server 2010. I already registered a
domain in Godaddy. How to configure Godaddy domain for enabling Exchange internet email configuration.
My atmosphere
Windows Server 2012
Exchange Server 2010 SP3
Domain host Godaddy
Any help highly appreciated. Thanks

The questions you have covers the full Exchange configuration!
To send an email outside, you need to create a send connector in Exchange 2010
http://technet.microsoft.com/en-gb/library/aa997285(v=exchg.141).aspx
You need to sort out your certificate and Exchange urls before enabling IMAP and POP. Both pop and imap services are disabled by default. You can go to services snapin and start the services by setting them from disabled to automatic.

TS3999 Why does my outlook 2007 update from iCloud?

iPhone to could works, as does cloud to iPhone. iPhone to cloud to 2nd iPhone if fine too. Outlook to iPhone also works. The olypart that is not working is iCloud to outlook?

Verify your upgradeSQL made it thru by looking in
~/Music/iTunes/Mobile Applications
on the Mac where you sync your iPhone for the YourApp.ipa file. Copy this file to a working folder and run this Terminal command:
unzip YourApp.ipa
and look for upgradeSQL.
BTW, this assumes you purchased a copy of you own App.
Message was edited by: xnav

Outlook 2010 client ask for credential when Exchange 2010 server restart

Hi,
Each time our Exchange server is restarted (most of time for update installation), all open Outlook clients are prompt for credential.
This is annoying because when the users come back, sometime they don't take care about the credential windows and believe that's they don't receive any mail and start to prompt the support when they notice that's their mail come to their mobile but
not on Outlook...
One solution is to ask everybody to shut their computer down every time an update of the server is planned. But as the users are, by design, very lazy and don't really care about this kind of things. It isn't an acceptable solution.
Does anyone know if there is a way for stopping Outlook to ask about credential when it loose temporarily the connection with Exchange ?
Thanks for reading

Hi,
Just checking in to see if the information from Ed (DareDevil57) was helpful. Please let us know if you would like further assistance.
Regards,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

How to sync BB and Microsoft Outlook 2007 and Business Contact Manager using Microsoft Exchange

Is a third party application needed to sync BB with Business Contact Manager? How is this done?
Thank you for your help and consideration.
Louie

Hi, and welcome to the forums!
See if this link if pertinent:
http://www.blackberry.com/btsc/search.do?cmd=displayKC&docType=kc&externalId=KB03090&sliceId=SAL_Pub...
If you need more information, please ask!
If not, please resolve the thread. Just place the check in the post that
answered your questions.
Thanks.
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Outlook for Mac mailbox is almost full with exchange 2010

I have a Mac user who's mailbox is almost full. On a PC we just archive email and it goes into a .pst. What do I do with this Mac?
This topic first appeared in the Spiceworks Community

You can disable this in the registry. This is not a Cisco documented or recommended option. I have done it for customers who were really adament about the notifications.
Here are the steps to do on your Unity server. Again I want to stress I'm not sure if this is Cisco supported but it's a simple change that requires no reboot.
1. Backup your windows registry
2. Open regedit
3. Browse to HKEY_LOCAL_MACHINE\Software\Active Voice\MalEx\1.0
4. Open the REG_DWORD DisableStatusCheck
5. Change the value from 0 to 1
This should take effect right away. This is a universal system all off for the Unity server only. Exchange is not effected.
Please rate any helpful posts
Thanks
Fred

About MS-Outlook 2007

Hello Guys,
I have some questions, I haven't worked on MS-Outlook for a long time so I have forgotten some of the concepts related to e-mails and outlook.
My questions are as follows:
Q.1 When we are actually seting up or configuring an e-mail account on MS-Outlook 2007, 1st do we need to make sure that the specific user for whom we are seting up e-mail account on MS-Outlook 2007 on client machine already has e-mail account on the
Exchange Server? I mean he should already have mailbox created on MS-Exchange Server ?
Q.2 Can we also use MS-Outlook to create a new e-mail account or we can just create a new profile on MS-Outlook?
Thanks

My questions are as follows:
Q.1 I mean he should already have mailbox created on MS-Exchange Server ?
Q.2 Can we also use MS-Outlook to create a new e-mail account or we can just create a new profile on MS-Outlook?
Email accounts need to exist before they can be configured in an Outlook profile - Outlook doesn't create email accounts - it connects to them via the desired protocol (Exchange, POP3, Imap, EAS/Mapi etc)
Karl Timmermans [Outlook MVP] "Outlook Contact Import/Export/Data Mgmt" http://www.contactgenie.com

Problem with outlook 2007

i have problem in outlook 2007 , i cannot sending external emails through exchange 2010 sp1
but i can send from owa and outlook 2010 good to extenal and internal i use autodicovry
i dont see any error on outlook or event viewe or view quee nothing
and massge not distintions external emai

Please try to enable RPC encryption on Outllook 2007 and see If it works.
Outlook 2007
To manually update an existing Outlook 2007 profile so that it uses RPC encryption with Exchange 2010, follow these steps:
In Control Panel, open the Mail item.
Click Show Profiles.
Select your profile, and then click Properties.
Click E-mail Accounts.
Select the Microsoft Exchange Server account, and then click Change.
In the dialog box that contains your mailbox server and user name, click More Settings.
In the Microsoft Exchange dialog box, click the Security tab.
Click to select the Encrypt data between Microsoft Office Outlook and Microsoft Exchange check box, and then clickOK (The
screen shot for this step is listed below).
https://support.microsoft.com/kb/2006508?wa=wsignin1.0
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Does MS outlook 2007 in client machine is recommended in Exchange 2010

Similar Messages

Maybe you are looking for