Does MSI 5850/70 have 100% fan speed for 2-3 secs when turning computer on?

Hi,
I currently have radeon 4870 and would like to upgrade to dx11 hardware. I seems that there are a lot of 4870/5850/5870 cards with stock coolers having this feature: they spin fan at 100% for couple seconds when I turn conputer on. And I don´t really like it. Question is, does MSI 3-in-1 High Efficiency Fan behave similarly on 5850/5870 series? If it does, can it be turn off using Afterburner or BIOS modding?

Yup, all new(er) cards do it, from any brand/manufacturer, so its not just an MSI thing.
And no there is no way to turn it off, unless you can write bioscode, or perhaps mount a different aftermarket cooler.
But why do you want to turn it off, like mentioned, they do this for a reason and its only a few seconds.
Ive said it before and I say it once, the sound is too short and too high pitched to wake people up, unless they sleep next to the computer.
Also, if you mod bios, or mount an aftermarket cooler and some goes wrong, bye bye warranty.
Read here also:
https://forum-en.msi.com/index.php?topic=133818.msg1006545#msg1006545

Similar Messages

MSI HD7950(twin frozr) 100% fan speed .. anymore solutions

Hi guys
i purchased a msi HD7950 twin frozr from ebay however it runs at 100% all of the time and no software can tame it ... ive also followed the guide and removed the faulty D201 diode which also never worked as the card still runs at 100% ( speedfan reports 4000rpm )
so apart from the faulty diode and using software is there anything else i can do .... ?
i was considering strapping 2 x 120mm fans to the card powered directly from the psu and a 3rd party gpu cooler ( such as the arctic cooling range ) also came to mind allthough these tend to be expensive
i also considered a fan limiter i got with a previous 3rd party gpu cooler .... if i reduced the fan speed power from 12v to 7v would this make any difference ?
many thanks

Well at what temp does the gpu/ram/vrms run at? Check with Afterburner: >>How to use MSI Afterburner<<

GTX 560 TI HAWK 82-84'c at 100% fan speed

Hello
I've noticed my hawk becoming VERY loud while playing games, Final Fantasy XIV and Deus EX: Human Revolution to name a couple. I downloaded Afterburner to see what the temperatures were and I'm astounded to see my card at 82'c at near 100% fan speed. I have the fan profile on performance mode and I have a well ventilated Cooler Master Storm Sniper with 3 200mm fans at the top, front, and side and one 120mm fan at the rear. My ambient room temperature is about 24'c so it's not my room temp.
Here's a screenshot while FF14 is running.
Touching the side support brace bar is hot to the touch.
EVERYTHING is at the default clock speed/voltage.
I think the cooler or something with the card is defective!
Should I set up a RMA ASAP?
If I should:
How long is the RMA process?
Does MSI offer an advance RMA service similar to EVGA?

Quote from: Henry on 19-October-11, 08:00:19
If you don't cause any physical damage to the card there should be no problem.
Svet, is that what you use to clean it, Jim Beam whiskey and a cross peen hammer to scrape the gooey stuff off? You should be using Everclear 190 proof instead, 151 proof at the very least.
Maybe I should check mine just to be sure. I took a look at my 465 last week and found the HSF mounting screws were loose.
Quote
Svet, is that what you use to clean it, Jim Beam whiskey and a cross peen hammer to scrape the gooey stuff off? You should be using Everclear 190 proof instead, 151 proof at the very least.
At final cleaning stage for old TIM [1st used the toilet paper, a special one, its doing excellent job for the task and its tenderly]
then used this[dunno how they are called in English]:
and then since the heatisnk surface and chip start shinning with light of clean and no any sign of TIm left,
i used a drop of Jim Beam whiskey over the
then clean both surfaces again, then start cleaning them again with the same, but with dry one.
Quote
and a cross peen hammer to scrape the gooey stuff off?
The Cross peen hammer on the photos is only for respect and i don't use it of course
Quote from: Newbie121 on 19-October-11, 19:41:06
What are those arrows? is that where i get to unscrew the entire cooling pipes away from the graphic board?
Just to check with you the pipes and fans are meant to be removed and installed back - right? I meant they are not glued or riveted in - correct?
The arrows shows the 4 for screws which you have to unscrew 1st.
Yes, they hold the entire heatsink+fans to the VGA's PCB
Quote
Just to check with you the pipes and fans are meant to be removed and installed back - right? I meant they are not glued or riveted in - correct?
They are not riveted, only the screws hold them.
There is TIM which works like a glue, which also holds the heatink to the GPU chip surface.
Once you unscrew all 4 screws, then you need to take off the entire heatsink,
don't use force, don't push it directly in up direction, start with small slides the entire heatsink as it makes contact with GPU's chip surface where the TIM is installed and works as glue, so start slide little by little, not too much and not too sharply cause the heatsink can hit and broke some of the PCB capacitors.
Just use little and small slides until you feel that heatsink is now disconnected from the TIM/GPU surface, then take it off carefully.
You have to disconnect FAN cable from PCB as well.

MOVED: [VIA] Does MSI KT3 Ultra have a 1/5 divider?

This topic has been moved to Overclockers & Modding Corner.
[VIA] Does MSI KT3 Ultra have a 1/5 divider?

That may be possible Wonkanoby , i'm not arguing against that (where the 5 divider kicks in).
But the issue is with going from 166 and upwards divider stays at 5 forever and cause you trouble with agp & pci devices.
Maybe I was unclear with the sentense:
"Fuzzy logic up the fsb so the divider divides by 5 all the way up beyond 166 PCI/AGP frequency then follows ."
What I meant is from 166 and further upwards the divider is 5 nomatter what the fsb/mem freq. is .
This way a fsb overclock to say 190~200 gives near 40mhz 80mhz on pci bus / agp as there is no
divider 6 kicking in on Kt333 . And theese pci/agp frequencys is not any good for your equiptment .

Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?

My desktop computer m9200T running Win7 Home Premium crashes often. It seems to be temperature related.
I had tried SpeedFan, but my computer crashed everytime I ran it. SpeedFan window scrolled 20 some lines of text than the computer crashed. Is there an utility for monitoring cpu/gpu temperature and fan speed for desektop m9200T?
This question was solved.
View Solution.

Hi,
Only have one temperature monitoring application running or you could end up with erroneous readings.
Try PC Wizzard. Depending on your hardware, you should see temperatures for CPU, GPU and disk. At the same site you can also try HW Monitor.
I am running a custom motherboard and it comes with its own software for this purpose. HW Monitor seems fairly complete.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great

I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!

The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying.

How do I delete documents from my iPad that were added when it ran regular Acrobat, now that it has switched to DC? The docs are not on the cloud, and DC does not seem to have a delete function for non-cloud docs.

I use an iPad. It automatically switched me from old-fashioned Acrobat to DC. How do I delete docs that were put on my iPad with the old Acrobat? They are not in the cloud, and DC does not seem to have a delete function for them.

Hi,
By default, Acrobat DC for iOS displays recently viewed files. You need to switch to other file location (such as Local, Document Cloud, Creative Cloud) to delete, rename, move, or duplicate files.
You can switch to Local, if you would like to see the files and folders that are locally stored on your iPad.
Would you take a look at the following document to see how you can switch to other file location and delete files?
How to manage files in Acrobat DC for iOS
Please let us know if you have additional questions. Thank you.

Does my MacBook Pro have an inernal convertor for European use?

Does my MacBook Pro have an internal convertor for use in Europe with a standard adaptor or do I have to get a separate convertor?

MBP power block autoconverts.
You just need a plug-end converter from your home country (making no assumption abiut USA) to the countries' (many have different and unique styles) you intend to visit.

Does Presenter 9 just have a plug-in for powerpoint

Does Presenter 9 just have a plug-in for PowerPoint 2013? Do people need to buy the full Presenter 9?

Presenter 9 is a plug-in to PowerPoint. Captivate 7 is a standalone application with much of the same functionality.

Ideal fan speed for retina mac pro

Dears,
Kindly need information about idel fan speed for MacBook Pro (Retina, 13-inch, Mid 2014), I feel on my right side the fan is running continuously.

The fan always runs continuously. Typical idle speed is around 2000 RPM. Maximum speed is around 5-6000 RPM.

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off. Please if anyone has any idea that I do, let me know. thanks

My iPad does not restart, I have kept the button for more than 10 seconds and will not turn off.
Please if anyone has any idea that I do, let me know.
thanks

Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: You have to hold 2 buttons down together.

Lick on the icon in appstore which allows to gift an app or copy link , post to facebook etc does not open it stucks.Also same case for itunes and moreover when I play music in iTunes it

Itunes and appstore problems:
i have an iPhone 5 whenever I try to click on the icon in appstore which allows to gift an app or copy link , post to facebook etc does not open it stucks.Also same case for itunes and moreover when I play music in iTunes it stops ..start again stops and start again ..stops and does not play..so I am unable to make gift purchase and listen to the songs..are these bugs or what? help

ps when syncing it jumps through steps 1 - 4 real fast, i seem to remeber iphone showing the number of tracks transferring and names, but i see nothing? then it sits on 5 saying "waiting for changes to be applied"

TS1424 I purchased songs from an EP then bought the album once it was released and have been charged twice for the same song when I already own it. How do I get refunded?

I purchased songs from an EP then bought the album once it was released and have been charged twice for the same song when I already own it. How do I get refunded?

Contact iTunes Customer Service
Apple Support iTunes Store Contact Us

HT204053 I have an Apple ID for App Store and when I try to log in to the iCloud, I get the message " this Apple ID is validbut not iCloud account "

Hi,
I have an Apple ID for App Store and when I try to log in to the iCloud, I get the message " this Apple ID is validbut not iCloud account "
Thanks.

http://www.youtube.com/watch?v=gmOmd_WFp6o
This was helpful for getting icloud set up from my pc...but someone said that they had it on their pc and then it disappeared. Fun! Fun! Fun!

The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts.

The default account option in iOS for contacts is missing; while I have multiple account options for mail and contacts are turned on for iCloud and other accounts. I previously was able to select between my Microsoft Exchange Contacts (work account) and iCloud (personal), but both those options are now gone. I tried turning contacts for both off and on and rebooting, but it didn't help. Any ideas?

Just a guess but if the exchange account is from your employer, your employer may have installed a security profile to your device preventing you from adding or editing contacts in the exchange account by removing the Default Account setting. You would need to check with your employer's IT department to confirm this. You could also test this by adding a Gmail account and turning on contacts syncing with Gmail to see if the setting reappears.

Does MSI 5850/70 have 100% fan speed for 2-3 secs when turning computer on?

Similar Messages

Maybe you are looking for