Does MSIKT4V Supports game port?

Hi, i've built my pc myself using MSI KT4V motherboard, athlon xp 2200, with 512MB DDR RAM. And the realtek sound card was built in.
I tried to install a cmedia 8738 sound card for it's gameport. I can get everything enable in the device manager but when i plug joypad into the gameport, nothing happens...???
Does my motherboard support game port, or what kind of problem am i looking at here?Software or hardware??
Thanks !!

I had the same problem with a logitech joystick I had... but I was using a sound blaster sound card, every time I tried to install it it would crash or do something I didn't like, I actually had to get the updated driver from logitech and then it worked sweet.  But that will only work if the gameport is being detected, you might need to visit C-Media's website to obtain the latest drivers for that card, if after all that it still doesn't work I recommend updating to a creative sound card, those work good with KT4V  

Similar Messages

  • MS 6534 game port support 2 joysticks?

    Can the MS 6534 game port support two joysticks? ?(

    It does, but considering the obsolete platform (SDR memory with a P4 is a very bad combo) this would not be cost effective.

  • I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

    I have a mid 2009 Macbook Pro and i know the Mini-display port does not support audio out but does it support HDMI out? or do i have to buy a Mini-display to DVI and then a DVI to HDMI adapters?

    Run MDP to HDMI for picture. Use a cable like this to run sound from your audio out on your Mac to your TV's audio in.  That's about all  you can do.

  • HT2693 I purchased Huawei Dongle and trying to connect with my NEW MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support. When I plugged in my the power is flowing in dongle due green light blinking twice in every 3 sec but no

    Hi,
    I purchased Huawei Dongle and trying to connect with my new MacBook Pro (OS- Mountain Lion) USB port 3.0 but unfortunately it does not support.
    When I plugged in my macbook the power is flowing in dongle due green light blinking twice in every 3 sec but no connection found or diver shown.
    Please let me know how I have to use it. I got some suggestion for USB hub 2.0 but It does not make any sense and driver installation.
    So please suggest proper direction to use it and provide link to install any driver.
    Thanks
    Tauheed Ahmad

    Yes Clinton I did same, but they were (Huawei customer support) surprised about this problem, They behave like they have no idea about USB 2.0 and  3.0 knowledge. They handsUp that reason I posted my problem in this forum.
    So is there any better solution to use any mediator between these USB version handling, Please let me know.
    Thanks
    Tauheed

  • Version 3.6.14 has a bug & does not support Java to play Pogo games - How do I install a earlier version?

    Pogo games plays on Java - the last version of Firefox 3.16.14 has a bug that does not support Java - I have been instructed by Pogo to install an earlier version of Firefox. How do I do that?

    Firefox 3.6.15 was just released to fix that Bug.
    You can use Help > '''Check for Updates''' to trigger an update to Firefox 3.6.15.

  • As apple does not support Adobe flash how do I watch youtube other  videos and play games?

    As apple does not support Adobe flash how do I watch youtube other  videos and play games?

    There is a YouTube built-in app for watching those videos. If you can't find the app (it can't be deleted), then check that it's not hidden via Settings > General > Restrictions > YouTube.
    For videos on other sites then you might find that some of them (probably more so if they are news sites) have their own apps in the App Store which might let you get some of the content that you want (and there is the built-in YouTube app). Also there are browsers such as Skyfire which 'work' on some sites - but judging by the reviews not all sites. If you want to play flash games then you are probably out of luck if you want to play on-line though the iSwifter app might work on some of them, but again some flash games have app versions in the store.

  • Does the ipod touch 3rd generation not support games?

    I recently purchased an ipod touch 3rd generation for my granddaughter.  We loaded music onto it with some difficulty but have been unable to load games.  Am I doing something wrong or does this unit not support games??

    Yes.
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Apple Club - filter apps by iOS version.
    App Store: Downloading Older Versions of Apps on iOS - Apple Club
    Also are yo sure yo have a 3G?
    A 3G goes to iOS 5.1.1 while a 2G only goes to iOS 4.2.1
    Identifying iPod models
    iPod touch (3rd generation)
    iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
    The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

  • Does EOP support custom TCP ports?

    I searched the sales and TechNet info but couldn't find anything definitive that says if Exchange Online Protection supports custom ports in a Hybrid model.  Does EOP require port 25, or can the outgoing and incoming connectors use custom ports?
    Also, the price is per user - but does that mean per AD user, or per alias? For example, if 100 users each have a primary SMTP address and 3 proxyAddresses, does that count as 100 licenses or 400?

    Does anyone know of a better forum for EOP questions?

  • I have an older airport express and my computer states that the air port utility version does not support it.  Do I need to download an update?  My Imac is from SEP of last year, the version with the optical drive

    I have an older airport express.  My airport utilities states that it does not support this base station.  I am try ing to use the airport express in conjunction with a base station to air play my itunes library in another room.  I have mountain lion on my Imac (purchased new in SEP of last year.  My Imac was the last issued with an internal dvd drive.

    Unfortunately, Apple discontinued support of the older AirPort base stations with the introduction of Lion and Mountain Lion.
    You might be able to use a somewhat complicated workaround.....not supported by Apple.....if you want to try to use the older AirPort Express.
    See this thread for details:
    https://discussions.apple.com/message/21397085#21397085
    More background info here:
    http://www.macworld.com/article/1167965/mountain_lion_and_the_ancient_airport_ba se_station.html

  • My account does not support the purchase of Games

    My account does not support the purchase of Games

    What happens when you try to buy something, does the 'buy' button not work, do you get any error messages ... ?
    If you are getting a message to contact iTunes Support then you can do so via this link and ask them and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
    If it's a different problem ... ?

  • Audigy 2 Game Port in Vis

    hi @ all?I'm new here and i've one important question!
    Does the Audigy 2 Game Port 00%?work?in Vista? I've scanned my PC with the Windows Vista Upgrade Advisor .0 and?this is the?result:?
    <span class="detailSummaryHeaderTextDiv">No issues were detected for these devices The following table contains devices that will automatically work after installation of Windows Vista.?Creative Game Port?????? Creative Technology Ltd
    ??is it 00% sure that the Game Port will automatically work in Vista???greez roflus

    [color="#999999">Thread :
    Creative Game Port
    http://forums.creative.com/creativel...essage.id=4732?[color="#999999">Thread 2:
    Controllers that use game ports (and other ports) are not supported in Vista!
    http://forums.creative.com/creativel....id=4909#M4909?[color="#999999">Thread 3:
    i need a little help with my joystick/gameport
    http://forums.creative.com/creativel....id=4862#M4862

  • Does the later 2009 MacBook support the Apple DVI to Video Adapter (s-video). I want to connect it to an old tv which does not support HDMI. Any suggestions?

    I have a late 2009 MacBook which I want to connect to an old LG tv. The tv does not support HDMI it only has the (red, while, and yellow) ports. Sorry I dunno the exact name for it.
    So I was thinking of using the Apple Mini DVI to Video Adapter (s-video), link below...
    http://store.apple.com/Catalog/dk/Images/M9319_screen.jpg
    But I'm afraid that the MacBook might not support the adapter.
    Can anyone give me a solution for this? Is there an alternative way of doing this? I'm kinda new to apple display adapters.

    The Late 2009 model 6,1 has a Mini DisplayPort not the Mini-DVI. To see which model you have go to the Apple in the upper left corner and select About This Mac, then click on More Info. When the System Profiler comes up check the Model Identifier.
    Composite is the name for the red, white and yellow RCA plugs on your TV or red, white and S-Video plugs. If you want to use the Composite input on your TV there’s no Mini DisplayPort to Composite. You’ll have to get a Mini DisplayPort to VGA adapter http://www.amazon.com/s/ref=nb_sb_ss_i_1_19?url=search-alias%3Delectronics&field -keywords=mini+displayport+to+vga&sprefix=mini+Displayport+to and a VGA Adapter to TV S-Video RCA Out Cable for PC Video. http://www.amazon.com/VGA-Adapter-S-Video-Cable-Video/dp/B000Y7T5UU/ref=sr_1_7?s =electronics&ie=UTF8&qid=1316369974&sr=1-7
    Only the Yellow plug or the S-Video plug for video will work. For sound you'll also need audio cables to the TV using a 3.5mm stereo headphone jack to RCA sound plugs. You attach it from the headphone jack of your MacBook to the appropriate input plugs on your TV  http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=min i-dvi&x=9&y=13#/ref=nb_sb_ss_i_2_19?url=search-alias%3Daps&field-keywords=macboo k+audio+cable&sprefix=macbook+audio+cable&rh=i%3Aaps%2Ck%3Amacbook+audio+cable

  • Dg4odbc to MySQL update errors: "does not support IS NULL in this context"

    I am having a problem with 'where x is null' clauses in update statements to MySQL from 11g, using dg4odbc. Updates using the clause 'where x is null' return errors like this:
    ORA-02070: database PLAZAHOST does not support IS NULL in this context
    The rejected queries never get to mysql. Furthermore, I noticed that select statements with 'where x is null' show up in the mysql query log with the where clause stripped out, although correct results are returned to SQLPlus. It looks as though 'where x is null' is stripped off by dg4odbc, which subsequently applies a secondary filter to the results received from MySQL.
    Note, both statements above work properly when issued from the MySQL client.
    Has anybody seen this? It's a big problem for me, but I can't find any references to other people having the same problem, so I assume I've got something misconfigured -- but I don't know what.
    I'm using MySQL ODBC 5.1 Driver, MySQL 5.1 Community Edition, and Oracle 11g R1 all running on a 32-bit Windows server.
    Thank you -- rick
    =============
    here's a spool of a sample oracle session:
    SQL> col descr1 for a40
    SQL> select * from t1@plazahost;
    id1 descr1
    1 hello
    2
    SQL> descr t1@plazahost
    Name Null? Type
    id1 NUMBER(10)
    descr1 VARCHAR2(255)
    SQL> select * from t1@plazahost where "descr1" is null;
    id1 descr1
    2
    SQL> update t1@plazahost set "descr1"='updated' where "descr1" is null;
    update t1@plazahost set "descr1"='updated' where "descr1" is null
    ERROR at line 1:
    ORA-02070: database PLAZAHOST does not support IS NULL in this context
    SQL> spool off
    =============
    here's the mysql query log snip for the oracle session:
    100804 10:24:20 1637 Connect     moms_oracle@MOMS_HOST on moms
              1637 Query     SET NAMES utf8
              1637 Query     SET character_set_results = NULL
              1637 Query     SET SQL_AUTO_IS_NULL = 0
              1637 Query     set autocommit=0
              1637 Query     select database()
              1637 Query     COMMIT
              1637 Query     SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED
              1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
              1637 Query     SHOW COLUMNS FROM `moms`.`t1`
              1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
              1637 Query     SHOW KEYS FROM `moms`.`T1`
              1637 Query     SHOW TABLE STATUS FROM `moms` LIKE 'T1'
              1637 Query     SHOW COLUMNS FROM `moms`.`t1`
              1637 Query     SELECT `id1`,`descr1` FROM `moms`.`t1` LIMIT 0
              1637 Query     SELECT A1.`id1`,A1.`descr1` FROM `T1` A1
              1637 Query     SELECT `id1`,`descr1` FROM `T1`
    100804 10:24:28 1637 Query     COMMIT
              1637 Quit     
    =============
    here's the Oracle HS trace file for the same oracle session:
    Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
    Heterogeneous Agent Release
    11.1.0.7.0
    Oracle Corporation --- WEDNESDAY AUG 04 2010 10:24:19.608
    Version 11.1.0.7.0
    Entered hgogprd
    HOSGIP for "HS_FDS_TRACE_LEVEL" returned "DEBUG"
    Entered hgosdip
    setting HS_OPEN_CURSORS to default of 50
    setting HS_FDS_RECOVERY_ACCOUNT to default of "RECOVER"
    setting HS_FDS_RECOVERY_PWD to default value
    setting HS_FDS_TRANSACTION_LOG to default of "HS_TRANSACTION_LOG"
    setting HS_FDS_TRANSACTION_ISOLATION to default of "READ_COMMITTED"
    setting HS_NLS_NCHAR to default of "UCS2"
    setting HS_FDS_TIMESTAMP_AS_DATE to default of "TRUE"
    setting HS_RPC_FETCH_REBLOCKING to default of "ON"
    setting HS_FDS_FETCH_ROWS to default of "100"
    setting HS_FDS_RESULTSET_SUPPORT to default of "FALSE"
    setting HS_FDS_PROC_IS_FUNC to default of "FALSE"
    setting HS_FDS_CHARACTER_SEMANTICS to default of "FALSE"
    setting HS_FDS_MAP_NCHAR to default of "TRUE"
    setting HS_NLS_DATE_FORMAT to default of "YYYY-MM-DD HH24:MI:SS"
    setting HS_FDS_REPORT_REAL_AS_DOUBLE to default of "FALSE"
    setting HS_LONG_PIECE_TRANSFER_SIZE to default of "65536"
    setting HS_SQL_HANDLE_STMT_REUSE to default of "FALSE"
    setting HS_FDS_QUERY_DRIVER to default of "TRUE"
    setting HS_FDS_SUPPORT_STATISTICS to default of "TRUE"
    Parameter HS_FDS_QUOTE_IDENTIFIER is not set
    setting HS_CALL_NAME_ISP to "gtw$:SQLTables;gtw$:SQLColumns;gtw$:SQLPrimaryKeys;gtw$:SQLForeignKeys;gtw$:SQLProcedures;gtw$:SQLStatistics"
    Exiting hgosdip, rc=0
    ORACLE_SID is "plazahost"
    Product-Info:
    Port Rls/Upd:7/0 PrdStat:0
    Agent:Oracle Database Gateway for ODBC
    Facility:hsa
    Class:ODBC, ClassVsn:11.1.0.7.0_0006, Instance:plazahost
    Exiting hgogprd, rc=0
    Entered hgoinit
    HOCXU_COMP_CSET=1
    HOCXU_DRV_CSET=178
    HOCXU_DRV_NCHAR=1000
    HOCXU_DB_CSET=178
    HOCXU_SEM_VER=110000
    Entered hgolofn at 2010/08/04-10:24:19
    Exiting hgolofn, rc=0 at 2010/08/04-10:24:20
    HOSGIP for "HS_OPEN_CURSORS" returned "50"
    HOSGIP for "HS_FDS_FETCH_ROWS" returned "100"
    HOSGIP for "HS_LONG_PIECE_TRANSFER_SIZE" returned "65536"
    HOSGIP for "HS_NLS_NUMERIC_CHARACTER" returned ".,"
    Exiting hgoinit, rc=0 at 2010/08/04-10:24:20
    Entered hgolgon at 2010/08/04-10:24:20
    reco:0, name:moms_oracle, tflag:0
    Entered hgosuec at 2010/08/04-10:24:20
    Exiting hgosuec, rc=0 at 2010/08/04-10:24:20
    HOSGIP for "HS_FDS_RECOVERY_ACCOUNT" returned "RECOVER"
    HOSGIP for "HS_FDS_TRANSACTION_LOG" returned ""HS_TRANSACTION_LOG""
    HOSGIP for "HS_FDS_TIMESTAMP_AS_DATE" returned "TRUE"
    HOSGIP for "HS_FDS_CHARACTER_SEMANTICS" returned "FALSE"
    HOSGIP for "HS_FDS_MAP_NCHAR" returned "TRUE"
    HOSGIP for "HS_FDS_RESULT_SET_SUPPORT" returned "FALSE"
    HOSGIP for "HS_FDS_PROC_IS_FUNC" returned "FALSE"
    HOSGIP for "HS_FDS_REPORT_REAL_AS_DOUBLE" returned "FALSE"
    using moms_oracle as default value for "HS_FDS_DEFAULT_OWNER"
    HOSGIP for "HS_SQL_HANDLE_STMT_REUSE" returned "FALSE"
    Entered hgocont at 2010/08/04-10:24:20
    HS_FDS_CONNECT_INFO = "momsPlazaHost"
    RC=-1 from HOSGIP for "HS_FDS_CONNECT_STRING"
    Entered hgogenconstr at 2010/08/04-10:24:20
    dsn:momsPlazaHost, name:moms_oracle
    optn:
    ##>Connect Parameters (len=43)<##
    ## DSN=momsPlazaHost;
    #! UID=moms_oracle;
    #! PWD=*
    Exiting hgogenconstr, rc=0 at 2010/08/04-10:24:20
    DriverName:myodbc5.dll, DriverVer:05.01.0005
    DBMS Name:MySQL, DBMS Version:5.1.35-community-log
    Exiting hgocont, rc=0 at 2010/08/04-10:24:20
    SQLGetInfo returns Y for SQL_CATALOG_NAME
    SQLGetInfo returns 64 for SQL_MAX_CATALOG_NAME_LEN
    Exiting hgolgon, rc=0 at 2010/08/04-10:24:20
    Entered hgoulcp at 2010/08/04-10:24:20
    Entered hgowlst at 2010/08/04-10:24:20
    Exiting hgowlst, rc=0 at 2010/08/04-10:24:20
    SQLGetInfo returns ` for SQL_IDENTIFIER_QUOTE_CHAR
    SQLGetInfo returns Y for SQL_COLUMN_ALIAS
    2 instance capabilities will be uploaded
    capno:1991, context:0x0001ffff, add-info: 0
    capno:1992, context:0x0001ffff, add-info: 1, translation:"`"
    Exiting hgoulcp, rc=0 at 2010/08/04-10:24:20
    Entered hgouldt at 2010/08/04-10:24:20
    0 instance DD translations were uploaded
    Exiting hgouldt, rc=0 at 2010/08/04-10:24:20
    Entered hgobegn at 2010/08/04-10:24:20
    tflag:0 , initial:1
    hoi:0x12f03c, ttid (len 26) is ...
    00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
    10: 322E3130 2E333131 3531 [2.10.31151]
    tbid (len 23) is ...
    00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
    10: 315D5B31 2E345D [1][1.4]]
    TXN Capable:3, Isolation Option:0xf
    Exiting hgobegn, rc=0 at 2010/08/04-10:24:20
    Entered hgodtab at 2010/08/04-10:24:20
    count:1
    table: T1
    Entered hgopcda at 2010/08/04-10:24:20
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:255, sign:1, radix:10
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    The hoada for table T1 follows...
    hgodtab, line 651: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:1, WHT=6 (TABLE_DESCRIBE)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 255 255 0/ 0 0 0 0 descr1
    Exiting hgodtab, rc=0 at 2010/08/04-10:24:20
    Entered hgodafr, cursor id 0 at 2010/08/04-10:24:20
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:20
    Entered hgotcis at 2010/08/04-10:24:20
    Calling SQLStatistics for T1
    Calling SQLColumns for moms_oracle.T1
    Column "id1": dtype=4, colsize=10, decdig=0, char_octet_length=0, cumulative avg row len=4
    Column "descr1": dtype=12, colsize=255, decdig=0, char_octet_length=255, cumulative avg row len=195
    Exiting hgotcis, rc=0 at 2010/08/04-10:24:20
    Entered hgopars, cursor id 1 at 2010/08/04-10:24:20
    type:0
    SQL text from hgopars, id=1, len=40 ...
    00: 53454C45 43542041 312E6069 6431602C [SELECT A1.`id1`,]
    10: 41312E60 64657363 72316020 46524F4D [A1.`descr1` FROM]
    20: 20605431 60204131 [ `T1` A1]
    Exiting hgopars, rc=0 at 2010/08/04-10:24:20
    Entered hgoopen, cursor id 1 at 2010/08/04-10:24:20
    hgoopen, line 83: NO hoada to print
    Exiting hgoopen, rc=0 at 2010/08/04-10:24:20
    Entered hgodscr, cursor id 1 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    Entered hgopcda at 2010/08/04-10:24:20
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:20
    hgodscr, line 506: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    Exiting hgodscr, rc=0 at 2010/08/04-10:24:21
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    SQLBindCol: column 1, cdatatype: -16, bflsz: 4
    SQLBindCol: column 2, cdatatype: 1, bflsz: 257
    2 rows fetched
    Exiting hgoftch, rc=0 at 2010/08/04-10:24:21
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:21
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
    0 rows fetched
    Exiting hgoftch, rc=1403 at 2010/08/04-10:24:21
    Entered hgoclse, cursor id 1 at 2010/08/04-10:24:23
    Exiting hgoclse, rc=0 at 2010/08/04-10:24:23
    Entered hgodafr, cursor id 1 at 2010/08/04-10:24:23
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:23
    Entered hgopars, cursor id 1 at 2010/08/04-10:24:23
    type:0
    SQL text from hgopars, id=1, len=31 ...
    00: 53454C45 43542060 69643160 2C606465 [SELECT `id1`,`de]
    10: 73637231 60204652 4F4D2060 543160 [scr1` FROM `T1`]
    Exiting hgopars, rc=0 at 2010/08/04-10:24:23
    Entered hgoopen, cursor id 1 at 2010/08/04-10:24:23
    hgoopen, line 83: NO hoada to print
    Exiting hgoopen, rc=0 at 2010/08/04-10:24:23
    Entered hgodscr, cursor id 1 at 2010/08/04-10:24:23
    Entered hgopcda at 2010/08/04-10:24:23
    Column:1(id1): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
    Entered hgopcda at 2010/08/04-10:24:23
    Column:2(descr1): dtype:12 (VARCHAR), prc/scl:255/0, nullbl:1, octet:256, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2010/08/04-10:24:23
    hgodscr, line 506: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    Exiting hgodscr, rc=0 at 2010/08/04-10:24:24
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:100, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 256 256 0/ 0 0 0 0 descr1
    SQLBindCol: column 1, cdatatype: -16, bflsz: 4
    SQLBindCol: column 2, cdatatype: 1, bflsz: 257
    2 rows fetched
    Exiting hgoftch, rc=0 at 2010/08/04-10:24:24
    Entered hgoftch, cursor id 1 at 2010/08/04-10:24:24
    hgoftch, line 117: Printing hoada @ 02A32DDC
    MAX:2, ACTUAL:2, BRC:2, WHT=5 (SELECT_LIST)
    DTY NULL-OK LEN MAXBUFLEN PR/SC CST IND MOD NAME
    4 INTEGER Y 4 4 0/ 0 0 0 0 id1
    12 VARCHAR Y 5 256 0/ 0 0 0 0 descr1
    0 rows fetched
    Exiting hgoftch, rc=1403 at 2010/08/04-10:24:24
    Entered hgoclse, cursor id 1 at 2010/08/04-10:24:27
    Exiting hgoclse, rc=0 at 2010/08/04-10:24:27
    Entered hgodafr, cursor id 1 at 2010/08/04-10:24:27
    Exiting hgodafr, rc=0 at 2010/08/04-10:24:27
    Entered hgocomm at 2010/08/04-10:24:28
    keepinfo:0, tflag:1
    00: 4D4F4D53 44422E38 62393537 3032392E [MOMSDB.8b957029.]
    10: 322E3130 2E333131 3531 [2.10.31151]
    tbid (len 23) is ...
    00: 4D4F4D53 44425B32 2E31302E 33313135 [MOMSDB[2.10.3115]
    10: 315D5B31 2E345D [1][1.4]]
    cmt(0):
    Entered hgocpctx at 2010/08/04-10:24:28
    Exiting hgocpctx, rc=0 at 2010/08/04-10:24:28
    Exiting hgocomm, rc=0 at 2010/08/04-10:24:28
    Entered hgolgof at 2010/08/04-10:24:28
    tflag:1
    Exiting hgolgof, rc=0 at 2010/08/04-10:24:28
    Entered hgoexit at 2010/08/04-10:24:28
    Exiting hgoexit, rc=0 at 2010/08/04-10:24:28

    is null statement is post processed. This means in case of a select ALL records from the remote database are fetched into the Oracle database and the is null statement is then processed locally in the Oracle db.
    So thze select will work as it is handled internally in the Oracle database. This also means as But "is null" isn't sent to the foreign MySQL db the update clause will fail with ORA-02070: database PLAZAHOST does not support IS NULL in this context
    You need to recode the statement or use passthrough statements.

  • While configuring speed 1000 i am getting error as sw2-storage-vdc(config-if)# speed 1000 ERROR: Ethernet2/6: Configuration does not match the port capability.

    storage-vdc(config-if)# show module
    Mod  Ports  Module-Type                         Model              Status
    2    32     1/10 Gbps Ethernet Module           N7K-F132XP-15      ok
    sw1-gd78(config-if)# sh module
    Mod  Ports  Module-Type                         Model              Status
    2    48     1/2/4/8 Gbps FC Module              DS-X9248-96K9      ok
    4    8      10 Gbps FCoE Module                 DS-X9708-K9        ok
    7    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    active *
    8    0      Supervisor/Fabric-2a                DS-X9530-SF2AK9    ha-standby
    10   22     4x1GE IPS, 18x1/2/4Gbps FC Module   DS-X9304-18K9      ok
    Mod  Sw              Hw      World-Wide-Name(s) (WWN)
    2    5.2(2)          1.1     20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
    4    5.2(2)          0.107   --
    7    5.2(2)          1.8     --
    8    5.2(2)          1.8     --
    10   5.2(2)          1.3     22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
    sw1-gd78(config-if)# sh run int ethernet4/6
    !Command: show running-config interface Ethernet4/6
    !Time: Mon Feb 20 22:56:12 2012
    version 5.2(2)
    interface Ethernet4/6
      no shutdown
    sw1-gd78(config-if)# no shut
    sw1-gd78(config-if)# speed 1000
    ERROR: Ethernet4/6: Configuration does not match the port capability.
    sw1-gd72# sh int ethernet4/6 capabilities
    Ethernet4/6
      Model:                 DS-X9708-K9
      Type (SFP capable):    10Gbase-SR
      Speed:                 1000,10000
      Duplex:                full
      Trunk encap. type:     802.1Q
      Channel:               yes
      Broadcast suppression: percentage(0-100)
      Flowcontrol:           rx-(off/on/desired),tx-(off/on/desired)
      Rate mode:             dedicated
      QOS scheduling:        rx-(2q4t),tx-(1p3q4t)
      CoS rewrite:           yes
      ToS rewrite:           yes
      SPAN:                  yes
      UDLD:                  yes
      Link Debounce:         yes
      Link Debounce Time:    yes
      MDIX:                  no
      Port Group Members:    none
      TDR capable:           no
      FabricPath capable:    yes
      Port mode:             Switched
    sw1-gd72# sh int ethernet4/6 transceiver details
    Ethernet4/6
        transceiver is present
        type is 10Gbase-SR
        name is CISCO-FINISAR
        part number is FTLX8571D3BCL-CS
        revision is C
        serial number is FNS12090EMJ
        nominal bitrate is 10300 MBit/sec
        Link length supported for 50/125um OM2 fiber is 82 m
        Link length supported for 50/125um OM3 fiber is 300 m
        Link length supported for 62.5/125um fiber is 26 m
        cisco id is --
        cisco extended id number is 4
               SFP Detail Diagnostics Information (internal calibration)
                                         Alarms                  Warnings
                                    High        Low         High          Low
      Temperature   36.21 C        75.00 C     -5.00 C     70.00 C        0.00 C
      Voltage        3.29 V         3.63 V      2.97 V      3.46 V        3.13 V
      Current        8.11 mA       11.80 mA     4.00 mA    10.80 mA       5.00 mA
      Tx Power       -2.65 dBm       1.49 dBm  -11.30 dBm   -1.50 dBm     -7.30 dBm
      Rx Power       -2.21 dBm       1.99 dBm  -13.97 dBm   -1.00 dBm     -9.91 dBm
      Transmit Fault Count = 0
      Note: ++  high-alarm; +  high-warning; --  low-alarm; -  low-warning

    Ankit,
    You are trying to set speed 1000 on a 10g sfp.
    type is 10Gbase-SR
    You will need to insert a 1gig sfp and then you will be able to set the speed.
    Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?

  • Lexmark does not support USB printing with Airport express

    See email from Lexmark:
    Hi Herman,
    Welcome to Lexmark e-mail support. I appreciate your query into Lexmark.
    Lexmark Inkjet printers are host based & work only USB attached. Currently Lexmark International does not support Airport Express on these printers.
    If you have any more questions or concerns, please contact me at your convenience and I will be happy to assist you. (If I am not available, another representative will reply to you as soon as possible.) To respond, please select "Reply" in your e-mail software, and be sure that the past e-mail is included in this reply.
    Regards,
    Arshad
    Lexmark Technical Support
    ***Original Message***
    On Sun Jun 18th 03:20:53 PM EST 2006, hernan.
    Dear Mamta,
    Thank you very much for your support. I already tried what you
    mention, but still without success. I downloaded again the x1100 all
    in one driver but still I can't print.
    Any suggestions?
    Thank you,
    Hernan
    -----Original Message-----
    From: [email protected] [mailto:[email protected]]
    Sent: Sunday, June 18, 2006 7:30 AM
    To: hernan
    Subject: Re:Lexmark Technical Support (Req# 942782055)
    Dear Hernan,
    Thank you for contacting us regarding this matter. I appreciate the
    opportunity to assist you, and I hope my suggestions will provide a
    resolution.
    Please follow the steps given below:
    1. Click on "Start," "Control Panel" and "Printers and Faxes."
    2. Right click on the Lexmark printer icon.
    3. Click on "Properties."
    4. Click on "Ports" tab.
    5. Place a check mark against "Enable Bidirectional Support."
    6. Click on "OK."
    You may copy and paste the web address given below to access the
    Lexmark 1000/1100 Color Jet printer Windows XP driver:
    http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:
    1:0:1:0:0&emeafr
    ame=&fileID=1580&searchLang=en&searchLang=en
    Please use the following steps to download the Lexmark 1100 Color Jet
    printer Windows XP driver to your desktop:
    1. Click on "Download Now."
    2. On the "File Download" screen, choose "Save."
    3. The next screen will be titled "Save As." Choose to "Save in
    Desktop"
    and click "OK."
    4. You should see files being transferred.
    ***Note*** If your browser uses a different file downloading format
    than specified above, you will need to resort to your browsers help
    files for downloading instructions. The object of steps 1 - 4 is to
    download the driver to your desktop. This way it is easily accessible.
    5. Once the files have completed downloading, double click on the icon
    with your file name.
    6. On the "Win Zip Self-Extractor" screen click "OK."
    7. To unzip the downloaded file choose "Unzip."
    8. A screen will then display the number of files unzipped
    successfully, click "OK."
    9. Please follow the on screen instructions to complete installation
    of your Lexmark printer.
    If you have any more questions or concerns, please contact me at your
    convenience and I will be happy to assist you. (If I am not available,
    another representative will reply to you as soon as
    possible.) To respond,
    please select "Reply" in your e-mail software, and be sure that the
    past e-mail is included in this reply.
    [AOL Users: In order to include the previous e-mail, you must
    highlight it with your mouse when you are replying.]
    If you need to reply, please be sure to include in your message all
    information from prior e-mail messages & replies. If your e-mail
    client automatically deletes prior e-mail thread information, it will
    cause a delay while we look up your support history. If this is the
    case you may want to save the old e-mails as attachments and attach
    them to the current e-mail.
    Sincerely,
    Mamta V
    Lexmark eSupport Team
    http://support.lexmark.com
    Rate Your Support Experience! Your feedback is extremely valuable to
    us.
    Please click the link below to participate in the Lexmark Customer
    Support Survey.
    http://support.lexmark.com//cgi-bin/survey.cgi?getSurveyID=7
    07&getSurveyName
    =
    ***Original Message***
    On Sat Jun 17th 06:20:55 AM EST 2006,
    hernan.>
    I purchased the Apple airport express that connects
    multiple
    wireless-networked PCs to a usb printer.
    is there a driver that can make this work?. I configured
    the printer
    according to the manual, received a test page and so on, but now it
    takes ages to start printing and printing never gets to 100%
    completion but to 99%. I am not able to cancel printing jobs and this
    is a whole mess.
    Best regards,
    Hernan
    vaio pcg-6c2l and IBM x40   Windows XP   Both service pack2

    Did you have a question?

Maybe you are looking for