Does Muse support multiple renditions of the same site?

I have built a desktop website, but would also like to build a mobile version of the same site.
Can Muse support a desktop and mobile edition of the same website? So for example, if the user is viewing the site on an iPhone, they see a mobile-optimised site?
I ask this because as it stands, it appears that Muse can't create fully responsive sites yet - or am I wrong?
Thanks

Hey JDnm,
It is possible to create a mobile phone layout but this stands apart from the desktop version. Both can even have completely different content. So Muse can create different versions for mobile, tablet or desktop. But they are not responsive in the true meaning of the word. When you scale down the browser window on a desktop the Muse site doesn't switch to the mobile version. A true responsive site has a central code that contains the content which is adapted to the device or browser size through the use of different sets of cascading style sheets (or querys).
I hope that future versions combine the Edge reflow technology with Muse's layout ease. Managing three sets of content through Muse is a bit of a hassle today.
So you are not wrong, Muse serves up different versions for different devices but doesn't allow you to build true responsive pages.

Similar Messages

How to support multiple users at the same time?

Hi all,
I have a Labview software which controls a analyzer via GPIB connector. When user A is using the software, user B has to wait until A is done. But actually, the analyzer is not very busy, when user A is using the software.
I want user A, B, C and D can use the software at the same time. just like we can open Multiple websites at the same time.
How can I program the software, so that the software can be open multiple times? Do you have any example?
Thanks a lot.
Steven
Solved!
Go to Solution.

Are all the users going to be measuring the exact same thing from the same instrument?
It would be possible to write a separate instrument server application that would handle all the direct interactions with the instrument. When one of the users needed to access the instrument, they would gain access to it through this server.
The big, Big, BIG caveat is that each interaction with the instrument would need to be atomic. In other words each access would need to configure the instrument, initiate the reading, report the results, and then reset the instrument back to some known default value.
As Dennis said, not a trivial process, but probably do-able...
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How can I distinguish multiple tabs of the same site in the tab bar?

Hello,
I've been following some massive open online courses (MOOCs) and its been necessary to have several tabs open at the same time for the same site. I would like to be able to distinguish these tabs by being able to put a tag instead of the site url ('instructions', 'template', 'code', 'scratch', 'docs' etc. etc) and/or a colour code.
Does anyone know if and how this can be done?
Many thanks

This one colors tabs, but the author warns that it doesn't work with other tab-related extensions, so you probably need to keep searching for one that does everything you want:
https://addons.mozilla.org/en-US/firefox/addon/colorfultabs/
If you don't find a do-it-all extension, you can modify the tab titles with a userscript that is specific to that website. This is because the tab displays the text designated in the page as its title.
You either could "hard code" the list of words for each of the pages, or you could have a script extract information from the page, for example, the first main heading, or some other predictable bit of data. The script then would insert your preferred wording as the title of the page and Firefox will show that on the tab.
To see how that appears, so you know whether it would be useful, you could do this experiment:
On a web page that has useless tab text, open the Web Console using command+alt+k (Windows: Ctrl+Shift+k). In the line at the bottom next to the caret, paste the following code and press Enter:
document.title="Magic!";
If you decide you want a script written for this, you could try the request forum on userscripts''.''org:
[http://userscripts.org/forums/2 Ideas and script requests - Userscripts.org]
Although some people offer small payments, that usually isn't necessary to motivate people to help.
Let me give you a brief warning about that site, though: over the past year, a lot of popular scripts were duplicated and reposted with additional code that hijacks your Facebook account. Be cautious when installing scripts, check the reviews, make sure there are no references to Facebook.

Firefox opens new tabs automatically, so i end up with multiple tabs of the same site. it's like it is consistantly trying to restore my last session.

Firefox keeps reloading tabs from my recent history over and over. So i might end up with multiple tabs of Pandora, Google home page or other sites I go to all the time-all running at the same time . rebooting does not help.

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well. 
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

Can an Apple TV support multiple PC at the same time?

My boss and I were wondering if an Apple TV could help us in a specific situation.
Let's say we are having a meeting and we are 3 in the room. Alternatively, each of us will have to present some slides / share our PC Screen. Today, we have to unplug the VGA/HDMI cable, and pass it to the other. This is non value added.
The 3 of us are running Dell PC's with Windows 7 & XP, and we were wondering if we had an Apple TV device, could the 3 us be able to share/mirror our screen, and (with the remote or and app), switch from one screen to the other ?

Hi
So basically, we get the Apple TV2, connect it to our Flat Screen, then we would have to install "Airparrot" on all PC that would need to mirror its screen on the Flat Screen.
As for connecting and disconnecting, how does this work? Every PC is having like a"control" panel where you can disconnect/connect or you do this using the remote?
About if Xbox allows this, I'm not aware, but not sure who we could "justifying" getting an Xbox for the office, where as an AppleTV would make more sense
Thanks

How can I actually open multiple tabs of the same site, instead of performing the new "switch to tab" action?

For example, sometimes I would like to open multiple tabs of Google Maps to get directions to multiple locations, and I haven't found a way to do so without open a new instance of the browser. Thanks.

This one colors tabs, but the author warns that it doesn't work with other tab-related extensions, so you probably need to keep searching for one that does everything you want:
https://addons.mozilla.org/en-US/firefox/addon/colorfultabs/
If you don't find a do-it-all extension, you can modify the tab titles with a userscript that is specific to that website. This is because the tab displays the text designated in the page as its title.
You either could "hard code" the list of words for each of the pages, or you could have a script extract information from the page, for example, the first main heading, or some other predictable bit of data. The script then would insert your preferred wording as the title of the page and Firefox will show that on the tab.
To see how that appears, so you know whether it would be useful, you could do this experiment:
On a web page that has useless tab text, open the Web Console using command+alt+k (Windows: Ctrl+Shift+k). In the line at the bottom next to the caret, paste the following code and press Enter:
document.title="Magic!";
If you decide you want a script written for this, you could try the request forum on userscripts''.''org:
[http://userscripts.org/forums/2 Ideas and script requests - Userscripts.org]
Although some people offer small payments, that usually isn't necessary to motivate people to help.
Let me give you a brief warning about that site, though: over the past year, a lot of popular scripts were duplicated and reposted with additional code that hijacks your Facebook account. Be cautious when installing scripts, check the reviews, make sure there are no references to Facebook.

Multiple logins from the same site not working with iCloud Keychain

Hello all,
I am trying to use the iCloud Keychain with my iPhone and iPad. I use a website that has two different logins, each with its own password. On Mavericks, I am able to select the correct username/password from my iCloud Keychain by pressing the "down" arrow in the username box.
However, with my iOS devices, I am unable to access multiple logins. It merely Autofills the most recently used combination on whichever device most recently visited the site.
Is there any way to get multiple login support working for an iOS device?
Thank you!

It is possible that there is a problem with the files sessionstore.js and sessionstore.bak in the Firefox Profile Folder.
Delete the files sessionstore.js [2] and sessionstore.bak in the Firefox Profile Folder.
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
* http://kb.mozillazine.org/Profile_folder_-_Firefox
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well. 
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost, so you will have to create them again (make a note or bookmark them).
See also:
* [1] http://kb.mozillazine.org/Session_Restore
* [2] http://kb.mozillazine.org/sessionstore.js

How does iCal, or Calendar, order the display of multiple events for the same time?

I can't for the life of me figure out how iCal orders the display of multiple items at the same time. Does anyone have a clue? It's not alphabetical. It's not according the the order of the calendars in the left pane. Is it just random? Any help would be greatly appreciated.

In the focus lost eventhandling start a thread which does
the actual handling.
the new thread waits for a little time (0.1 seconds)
the click event of the button checks for a thread like the one above and tells it not to execute
This way you execute the for the lost focus event only if
the ok button isn't clicked in the same process ... not
realy good, because it kind of relies on the ordering of threads ... but maybe it still works for you?

I want to use multiple colors in the same box - Pantone plus process. I am trying to create a support plate of cyan under a PMS.

I want to use multiple colors in the same box - Pantone plus process. I am trying to create a support plate of cyan under a PMS.

How is the external drive formatted?
Allan

Does af:commandButton submit multiple requests at the same time?

Hi experts,
I have a question about af:commandButton behavior.
I have two commandButtons in a page. They are button1 and button2.
Button1 takes a few seconds to complete its request process.
So when I click button1, I can click button2 although button1 request is still being processed.
I checked how ADF faces handled this situation with servlet filter.
And I saw that button2 request was always submitted after button1 request was completed.
Due to this behavior, I would assume that commandButton is designed not to submit multiple requests at the same time and guarantees click order.
However I couldn't found any documents specifying this feature of commandButton.
If anyone knows it, could you share?
I know ADF Faces has busyStateListener to prevent user inputs during request round trip.
But I'd like to make it sure that I don't need to use busyStateListener if I just want to keep processing order.
Regards,
Atsushi

Hi,
Does anyone know the document specifying the behavior of af:commandButton in case I click two buttons in a page almost simultaneously?
Any help will be much appreciated.
Thanks in advance,
Atsushi

Find my Friends : Support for multiple users under the same Apple ID?

Can multiple users under the same Apple ID use the app to find each other? My daughter uses my Apple ID with her iPod touch which allows me to monitor her purchases but it seems that only one device under an ID can use the app at a time. If that is the case then it is a major disadvantage and I will need to go back to using latitude (or Find My iPhone which also allows me to see where all of my devices are at the same time)

http://isource.com/2011/10/16/how-do-you-set-up-icloud-for-a-family/
This worked for me.

There are multiple users with the same display name

Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regards

Hi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Under Options , Applications There are multiple entries for the same item (Acrobat Document). how can I delete the duplicates?

Under Options, Applications there are multiple entries for the same item. (Adobe Acrobat) . Three show Adobe Acrobat Reader 9.3 and the other shows (ask) or (save file) with no ability to select Acrobat Reader . Is there a way to edit this list to remove the duplicates and
the incorrect entry? Adobe installed a very quick update today.

They are all different. Hover your mouse pointer over each of the "Content Type" descriptions and you should see a "tooltip" to see that each has a different description.
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
* Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
* Shockwave Flash 10.1 r53
* Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox
#'''Update Shockwave Flash'''
#*Use Firefox to Download and SAVE to your hard drive from the link in article below
#*SAVE to your Desktop so you can find it
#*After download completes, close Firefox
#*Click on the file you just downloaded and install
#**Note: Vista and Win7 users may need to right-click the installer downloaded and choose "Run as Administrator"
#**Note: Most browsers other than IE will also get updated with this one download
#**Note: To update IE, same procedure '''but use IE''' to go: http://fpdownload.macromedia.com/get/flashplayer/current/install_flash_player_ax.exe
#*After installation, restart Firefox and check your version again.
#*'''Download link and other information''': https://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash
#* Also see: http://support.mozilla.com/en-US/kb/Installing+the+Flash+plugin
#* Also see (if needed): http://kb2.adobe.com/cps/191/tn_19166.html#main_Uninstall
#'''Update Java:'''
#* Download and update instructions: https://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox

Stop opening multiple instances of the same application

I am used to having graphic files on my desktop, when editing one I would simply right-click and pick "open with" > Photoshop (which is always open in its own desktop in my computer). Now out of the blue, if I do that, it loads another instance of Photoshop, which is certainly what I don't want. I can have 2, 3, 4 Photoshops running at the same time and editing the same image!
Any idea how to solve this? I searched but all I could find is people wanting the opposite i.e. opening multiple instances of the same app.

Your best bet to prevent this is to detach or unmount this drive; however, you can also try resetting your Mac's launch services, to have it re-scan only the Applications folders on your boot drive for programs to associate with documents and services you are using. Running the following command in the OS X Terminal will kill the current launch services database (its long, but copy and paste the entire line):
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill
Following this, run the following command to seed the database with the apps you currently have installed:
/System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -seed
Note that these changes will only apply when opening documents that have not been specifically assigned to a program. If you find a specific document continues to open the program on the external drive, then you can get info on it and change the associated program in the "Open With" section of the info window. After doing this, you might need to re-run these commands above, as opening the program will register it with OS X's launch services and have it now be available for automatically handling other documents.

Deploy multiple instances of the same stateless session EJB

I have a stateless session bean.
The methods on the bean operate against DB tables.
Q: Can I deploy multiple instances of the same stateless session bean, but specify a different JNDI/datasource name in the deployment descriptor?
The method calls are all enclosed within a single invocation, just that I need to hit different databases (all with the same schema), and Id like to be able to lookup the EJB via a different JNDI name, and have the exact same functionality, just against different deployed datasources.
Does the spec allow/support this?
If not, any suggestions as to how to achieve this sort of functionality?
Im using JBoss 3.2.1 on Solaris, so Im not sure whether or not this is a JBoss "issue" or a limitation of the EJB Spec (or me being just plain wrong and trying to do something the "wrong way")
Nick

I have a stateless session bean.
The methods on the bean operate against DB tables.
Q: Can I deploy multiple instances of the same
stateless session bean, but specify a different
JNDI/datasource name in the deployment descriptor?
The method calls are all enclosed within a single
invocation, just that I need to hit different
databases (all with the same schema), and Id like to
be able to lookup the EJB via a different JNDI name,
and have the exact same functionality, just against
different deployed datasources.
Does the spec allow/support this?
If not, any suggestions as to how to achieve this sort
of functionality?
Im using JBoss 3.2.1 on Solaris, so Im not sure
whether or not this is a JBoss "issue" or a limitation
of the EJB Spec (or me being just plain wrong and
trying to do something the "wrong way")
NickI haven't done it but judging from the deployment descriptors yes.
For example if I have two bounded datasources java:/Database1 and java:/Database2
Lets say I have a session bean called MySession, then in your ejb-jar.xml you would have (notice that the desc, display, and ejb-name are the only differences)
<session>
<description>MySessionAlpha</description>
<display-name>MySessionAlpha</display-name>
<ejb-name>MySessionAlpha</ejb-name>
<home>com.mycorp.MySessionRemoteHome</home>
<remote>com.mycorp.MySessionRemote</remote>
<local-home>com.mycorp.MySessionLocalHome</local-home>
<local>com.mycorp.MySessionLocal</local>
<ejb-class>com.mycorp.MySessionFacadeBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/DataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
<session>
<description>MySessionBeta</description>
<display-name>MySessionBeta</display-name>
<ejb-name>MySessionBeta</ejb-name>
<home>com.mycorp.MySessionRemoteHome</home>
<remote>com.mycorp.MySessionRemote</remote>
<local-home>com.mycorp.MySessionLocalHome</local-home>
<local>com.mycorp.MySessionLocal</local>
<ejb-class>com.mycorp.MySessionFacadeBean</ejb-class>
<session-type>Stateless</session-type>
<transaction-type>Container</transaction-type>
<resource-ref>
<res-ref-name>jdbc/DataSource</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</session>
But now in the jboss.xml, we will have the following elements. What you may notice is that are bound to different remote and local jndi names. But the resource bindings are very different. The res-ref-name stays the same, but the jndi-name are different. I think this will work for you.
<session>
<ejb-name>MySessionAlpha</ejb-name> <jndi-name>ejb/com/mycorp/MySessionAlphaRemoteHome</jndi-name> <local-jndi-name>ejb/com/mycorp/MySessionAlphaLocalHome</local-jndi-name>
<resource-ref>
<res-ref-name>jdbc/datasource</res-ref-name>
<jndi-name>java:/Database1</jndi-name>
</resource-ref>
</session>
<session>
<ejb-name>MySessionBeta</ejb-name> <jndi-name>ejb/com/mycorp/MySessionBetaRemoteHome</jndi-name> <local-jndi-name>ejb/com/mycorp/MySessionBetaLocalHome</local-jndi-name>
<resource-ref>
<res-ref-name>jdbc/datasource</res-ref-name>
<jndi-name>java:/Database2</jndi-name>
</resource-ref>
</session>

Does Muse support multiple renditions of the same site?

Similar Messages

Maybe you are looking for