Does mxctrllib provide a call which returns a reference to all the logical names in MAX?

I'm looking for a call that returns all the MAX logical names on a system. I would populate a drop-down box with those names to allow the user to select a name at program run-time. Currently I hard code a particular logical name as a string and init the session. This is not flexible. Thanks ...

The NiMxCtrl.dll which is the server for the mxctrllib objects is meant for National Instruments internal product use only. There is no documentation for developing 3rd party apps that utilize its functionality.
I'm not sure if you are talking about the IVI logical names listed in MAX or not, but if you want to know where you can get a list of these, they are in the ivi.ini file found in your C:\VXIpnp\Win95\niivi directory. Just parse this file to read all of your IVI logical names and setup parameters.
Jason F.
Applications Engineer
National Instruments
www.ni.com/ask

Similar Messages

  • From which table could i get all the Variants of a specific ABAP program?

    Hi,
    From which table could i get all the Variants name which belong to a specific ABAP program?
    Thanks.

    Hi,
    Check the table starting with TVAR*.
    Regards,
    Atish

  • From which table could i get all the Variants of a ABAP program?

    Hi,
    From which table could i get all the Variants name which belong to a specific ABAP program?
    Thanks.

    Hi Hoo,
    You can get the variants of a ABAB Program from table <b>VARID</b>. Give the report name to the VARID-REPORT field and you will the list of variants for this report under field VARID-VARIANT and VARID-ENAME is the user who created the variant.
    Otherwise, You can use the function module RM_GET_VARIANTS_4_REPORT_USER to get the variants of a report
    Thanks,
    Vinay

  • Does OBIEE provide any tool or API for creating documentation for the RPD.

    Hi,
    I have a requirement to generate a user guide type of doc for a given subject area which should list following details.
    1. All the objects name and description entered for each objects in presentation layer.
    2. All the columns of each objects and their description entered in the presentation layer.
    3. All the objects and their hierarchies.
    Does OBIEE provide any tool or API through which we can generate documentation having these informations automatically?

    HI Venkat,
    Thanks for the reply. I have one question. If I give a description for any object or it's columns, that doesn't appear if I use Repository Documentation utility given in your link.
    Also if I populate the table from the flat file it generates and import into physical layer and bring into Presentation layer. It gives consistency check error while saving and in BI Answer I can't see any columns of that table. Do you have any workaround for that?
    I have also seen your other Article of Generating Metadata Dictionary. How is this different then the one you suggested.
    Thanks,
    Niraj

  • Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

    Help. I can´t slide to answer when the phone rings, and i´m missing a lot of phone calls! It doesn´t happens all the time but quite enough to be annoying. I´v restarted and updated it. Suggestions? Thanks

    When you said you have no fax machines on your line, that does include computers directly connected to the phone line?
    The reason that I ask is a computer with a dial-up modem (a non broadband modem) that can connect to your phone line, can have software that makes the computer act as a fax machine.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • A previous and unrelated text always appears when I need to send a new text. This prevents forwarding texts also, which I need to do all the time for my business. How can I fix? Please help!

    A previous and unrelated text always appears when I need to send a new text. This prevens forwarding texts also, which I need to do all the time for my businss. How can I fix? Please help?

    Hi,
    This sounds like it is about Window positions.
    iChat has Default places for Incoming Invites.
    Video is always top Center of your Screen
    Audio and Text chats are Upper right with the Audio slightly lower than Text Chats.
    Secondary invites are sort of Stacked like when you open multiple files from the same App.
    Your outgoing Windows are "Remembered" as to where the last one was when you used it.
    This can be an issue if you use your Mac with a second display and turn Off Mirroring.
    You windows can get "left" on the other screen.
    Go to System Preferences > Displays and turn On Mirroring and the windows should come back to one Screen/display.
    If this does not help go to your Home Folder/Library/Preferences and delete (Drag to Trash) com.apple.ichat.plist and restart iChat.
    Unfortunately you will need to reset any iChat Preferences you have changed from defaults.
    10:42 PM      Tuesday; April 26, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
    , Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • TS4006 Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Is the device lost or stolen? If so it may be turned off, not connected to the internet, and/or have a dead battery in which case it may never appear.
    The what next is then covered in:
    If your iPhone, iPad, or iPod touch is lost or stolen
    Reporting a lost or stolen Apple product

  • My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    My ringer is no longer working for text and email notifications. Only working for phone calls. I have gone through all the settings to see where something is off. Not finding anything. I have tried changing the tone and it just vibrates on everything.

    Ok so I happened to figure it out while on the phone to apple support. Even though the guy was very nice, I think I knew more than him! He was explaining very basic resolution principles I played about. I had the second option in displays resolution. All I did was unplug the HDMI cable, click on 'best for display' then plugged the HDMI in and my resolution on the normal monitor changed to the normal blue, then went black momentarily and then changed to a strange resolution but another window appeared that said SONY BRAVIA HDMI at the top! Hey presto! Don't know why it didn't do it yesterday - I probably left the HDMI cable in or something! Oh well. Problem solved!

  • HT201263 My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

    My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?

    JesusDGZ wrote:
    My ipod Touch does not want to turn on. I've tried all the different methods and I'm stuck and dont know what to do now. What else can I try?
    I have no clue what you mean by "all the different methods."  Here are my suggestions.
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • HT203167 I cannot sync my iPad or iPhone to iTunes on my Windows 8 PC, even though I have been doing this successfully for years. I have been through all the troubleshooting steps I can find in iTunes, to no avail. Help please?

    I cannot sync my iPad or iPhone to iTunes on my Windows 8 PC, even though I have been doing this successfully for years. I have been through all the troubleshooting steps I can find in iTunes, to no avail. Help please?

    I seem to be having the same problem on my Windows 8 laptop... I am able to update my iPod Nano through iTunes but my iPhone is not recognized as a device in iTunes. Have been able to update my iPad until recently. Is this a bug fix that Apple can help with? I'd rather not uninstall all my Apple programs if I can avoid it...

  • Does installation of Server.app 3.1.1 on Mavericks change the OS Name?

    Does installation of Server.app 3.1.1 on Mavericks change the OS Name as seen in sw_vers?

    littlejon1 wrote:
    Ah. Now, we're getting somewhere! That's more like what I'm looking for. Thanks.
    Suggestion, if somebody hasn't already tested this: Might want to follow the removal instructions for Server.app (see Help > Removing Serfver) and confirm whether that .ServerSetupDone file does or does not continue to exist, before you bet on that as the detection path.

  • So does anyone have any info on if apple know about all the problems with the iTunes update?

    By problems I mean:
    . The unability to sync music from your laptop/computer to your apple device
    . The slowness
    . Unable to log in
    . Being told that the laptop/computer being used isn't recognised
    . Clicking on music and it flicking through really quick without playing and then not playing after, but still being on apple device.
    + all the other problems i've seen mentioned on this page. It's pretty clear the new updates have glitches that urgently need fixing and a lot of people are encountering some or multiple of these problems.
    I've not seen or heard any announcement whether they know or not or if they're doing something to fix this, because they need to. Urgently.

    Hi JamilMereck,
    first of: you can edit previous posts in a time-frame of some minutes (haven't measured it ...).
    After that they become non-editable.
    I admit I have used microphones some years back with and without PCs (have switched to Macs 2.5 years ago).
    But I always had the mics connected to a mixing desk, which provided Phantom Power.
    Since I gave up my 'Singing Career' (wasn't good enough) I also abandoned the use of microphones.
    To your questions:
    It might be that PCs with specified Microphone-In ports are also providing power to them or the microphones themselves do not need any power.
    And the 'compatible with...' refers to the usage on computers in general.
    The iMic from Griffin works with OSX 10.5 (scroll down on the webpage to 'Product Compatibility' the left icon symbolizes OSX 10.5).
    As said above, I am no longer up-to-date in usage of microphones, but when you want to use a microphone with the standard connector you have to get either a microphone preamp or a mixer.
    If you use the mic only (really only) with your Mac Pro, you might wanna look for USB-connected mics from Samson or Audio Technica for example.
    And don't get upset, I understand you fully and any kind of 'insult' is for the manufacturers and not for me
    Stefan

  • Report Column Attributes Does Not Display All the Column Names

    Good Morning,
    I have an interactive query Select * from table_name. I have to select * since my query returns well over 32k. I have 162 columns in the query. On the screen, all the columns are displayed; however, on the report tab, only about half of the columns are displayed. The rest are cut off. I need to be able to go into these field's attributes. Is this an APEX bug, or am I just missing something.
    Regards,
    Kelly

    Hello Tony,
    I can't break them out because APEX is limited to one interactive report per page. There is need to be able to do computations on the data, which interactive reports allows. The data is all statistical.
    Regards,
    Kelly

  • In which table can i get all the SC for an approver.

    Hello, i need to get a list of all SCs that an approver X has in his inbox.How can i do this(table preferably)?
    thx in advance

    Hi,
    You can do the following :
    Run FM   SAP_WAPI_CREATE_WORKLIST by giving the User Id as Input. This will return all the workitems WIS[] for the user irrespective  of the Business Objects.
    Use this result and filter by reading the records from  table sww_contob. you can give the object type to this as 'BUS2121' . and lv_cont_obj_name ='REQREQ'   and map the work id with WIS[].
    This would give you all the records meant for approval for an approver.
    Best Regards,
    Sapna

  • Portlet to return 'description' field of all the child pages

    How do I create a dynamic portlet that return the description of all the pages that a user has access to?

    This is all the subpages that the user has access to given a page.

Maybe you are looking for

  • How to find out which validation is failed.

    Hi Experts, Here is another problem I am facing. I am getting an exception during record update. com.sap.mdm.commands.CommandException: com.sap.mdm.internal.protocol.manual.ServerException: One or more records failed a validation I am not able to pri

  • When posting GI for Non valuated material in Delivery geting error (M8147)

    Hi Experts We have a problem that we are trying to send a material from one plant in one company code to another plant in another company code (Inter Company Stock Transfer Order). The material is of type Non Valuated (So it has no valuation class).

  • STRING field in a table

    I have a table in SAP(PLM) where I need to change the existing 255 CHAR fields to 1250 CHAR long.  There are six fields in the table that I need to change.  All the BAPIs using the table are all created and so using LCHAR data type is not going to be

  • Can't install any dmg files...

    As soon as I double click on the dmg file, the disk utility screen appears... and thats it. Jean

  • ¿Should I go for less desviation media absolute or for less total error in forecast?

    Hello, I have started using forecast process for automatic reorder level, I have set the system to use automatic mode and I used also "parameter optimization" in order to get the less DMA because it is an indicator for an accurate forecast, but since