Does my Linksys E2000 support VDSL2?

My dutch ISP (Online) has sent us a new modem/router, a HUAWEI HG655d Home Gateway. I want to bridge it and and carry on using my existing Linksys E2000 router to manage the traffic on my home network.
I've been having problems setting this up and someone has suggested that perhaps it's because the E2000 doesn't support VDSL2.
Can anyone please clear this up for me?
I've also attached a screenshot of the WAN settings page for the new HUAWEI modem/router. Why are there 2 seemingly identical ADSL2+ connections listed, and also 2 seemingly identical VDSL2 connections, all enabled? Can I switch between them at will? If the E2000 doesn't support VDSL2 can I simply choose to use, say, ADSL2+, does the Linksys E2000 support ADSL2+ and what difference would that make? Or is VDSL2 pre-ordained by my ISP and unchangeable?
I'm not too smart about all this stuff, but I really need to sort this out. The kids are getting restless, they'll be coming for me soon, and I've only got so many bullets... ;-)
Thanks in advance
Al

teaforthreeorfour wrote:
Hi again; one of our cats is called Shadster, it's like I'm getting IT advice from our cat lol...
Thanks, I'll run through it all again but try manually setting those IP addresses on the Linksys, and get back to you :-)
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Similar Messages

  • Linksys E2000 Fail

    So the other day I am having problems with my router , I stop by Best Buy and pick up a Linksys E2000 . Almost the top of the line router, out of the box it will not talk to the modem. Ok I have Charter come and replace the modem, plug back in the brand NEW router still will not get a IP from the modem. I update the firmware in the router and ask Linksys support for help and still it will not connect to the internet. This is the 2nd Linksys product I have got in the last 2 years that have failed or failed to get fixed by Linksys !

    most cable providers don't have mac clone registration security on their lines but on some that do, you need to have that done no matter what the brand of your router is. Are you doing the MAC Address clone procedure on the primary computer? Are you doing it while wired on the router? The wired adapters mac address is the one you have to put into the router mac address clone subtab so you'd get connected. I would suggest you take a look at the mac address you are getting while directly connected to the modem first then write it down, go to the router setup page and see if the same numbers and letters appear, if not then change it to that and turn off everything then turn them back on. That should get you online.
    "Sometimes your knight in shining armor is just a retard in tin foil.."-ARCHANGEL_06

  • How to get a open NAT type with a linksys E2000 on PS#

    I called customer service and they were completely clueless, told me I had to pay for the Tech support to fix it. I have a Linksys E2000 and I cannot get a open nat for my PS3, tried the DMZ, and XBox settings but that obviously didnt work. So anybody have any ideas before I return this $100 router???
    Solved!
    Go to Solution.

    I've been having the same problems but on my Xbox.  I'm going to try this:
    On router:
    1 - Status tab
        Get DNS 1 & 2
    On Xbox: 
    2 - Static IP on Xbox
        IP: 192.168.1.xxx
        Mask: 255.255.255.0
        GW: 192.168.1.1
    3 - DNS Addresses on Xbox
    On router:
    4 - Forward ports 
        TCP 80    
        UDP 88    
        Both 53, 3074
    5 - Security tab
        uncheck Block Anonymous Internet Requests
        disable uPnP?
    6 - Reset devices 
    I'll let you know how it goes.

  • HP Laptop and Linksys E2000

    I cannot get the HP laptop HP dv6915 connected to a Cisco Linksys E2000 router.  I have updated drivers for the WiFi card but can't get connected via the wireless connection.  Cisco is no help at all.  Does anytone have the magic answer on how to make this connection?

    Hi:
    The only thing I can think of, is because the E2000 is a selectable dual band router, you should make sure it is set for the 2.4 GHz frequency. If it is set to the 5 GHz frequency, your wireless card won't pick it up. According to the specs on your notebook, it has a wireless G (2.4 GHz) card.
    Paul

  • Linksys E2000 router is incompatible with Linux?

    Hi All, I have Cisco/Linksys E2000 router setup for home wireless network. I had been setup while ago and well working since then. Now the challenge: I need to know or to change the wireless guest network password. Linux support says it can be done ONLY using a local application, not the web interface. And only from Windows computer. In my situation, I have Linuxes, blackberry, players and other network equipment but no Microsoft software. I did not know that router doesn't work with Linux when I bought it. Had anybody resolved similar issue? Thanks Yu

    Sorry the software is only supported on Windows or MAC.  You will need this to administer the Guest network.

  • Linksys E2000 connecting only to local

    Good Day, wondering if anyone can assist me. I have a linksys e2000. since recently i am only able to connect to the local network there is no internet access. this is a major issue because i need wireless access.  Does anyone have any solutions i could try. I am using windows 7.

    There's a possibity that the router or modem stopped providing internet connection. For this issue, you can check if the wired connection is working (wireless connection will not work if wired is not working). Connect your computer to the router and check if you can get online. If not, bypass the router and connect the computer to your modem. If the internet won't work, call your internet service provider. If internet will work on the modem, then it's a router problem. A reset and reconfiguration might be needed to get it working again. To proceed with the reset, just push and hold the reset button on back of the router for 10seconds. Wait for the power light to be solid and proceed with the reconfiguration. If you still have the setup cd, you can run it on your computer. If you don't have it anymore, these links will provide you instructions on how to reconfigure your router manually: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=93d3d72ddaad4d01b2f9da5d51eaf0d4_Setting_Up_your_L..., http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3687, http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=3686.

  • Does the 6600GT-VTD128 support video capture?

    Hi,
    I recently purchased an MSI 6600GT-VTD128 video card.  The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in.  However, I haven't been able to get any video capture to work.
    Does the card actually support this functionality?  If not, what are the video input connections for?  If so, is there some documentation as to how to set it up?  
    So far, I tried installing the video capture drivers that come with the card.  I checked the manual.  I checked the MSI web site FAQs.  And I searched the forums.
    Any help would be greatly appreciated.
    Thanks,
    Daniel

    Thanks Richard.  Yes I do have a breakout cable like that.  Actually, I described it in my original message.  So, I am guessing from your message that you believe that the card should have the capability to capture video.  
    In my original message, I asked if there was any documentation on setting up the card for video capture.  The manual does not describe the procedure, nor does the MSI web site.  
    There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them.  In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
    If anyone out there has successfully used this card for video capture, please let me know.

  • HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

    I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

    Start here... http://www.apple.com/support/iphone/assistant/itunes/

  • Does Photoshop CC not support touch on Windows 8.1 tablet?

    Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.

    Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
    Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support.  Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK  API lack features used by Photoshop Brush engine.

  • Does Sender Mail Adapter support "PayloadZipBean" module

    Hi everyone,
    I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
    Zip file always contains 1 file and is a text file.
    so Its an Email to File Scenario.
    Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
    If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
    Thanks,
    Varun

    Hi Varun,
    Use "PayloadZipBean " Module at Receiver Communication Channel  in the Module Tab Set the "Module Key.mode =  unzip"
    and Receiver communication Channel file should be "FileName.txt".
    http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
    Regards,
    Naga.

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Help setting up my Linksys E2000 to play a game

    I just recently bought a Linksys E2000 router. Works great while searching the internet and such.. But I get huge lag spikes while playing Call of Duty Modern Warfare 2.  I know its not my computer. When I take it to work and hook up to my jobs wireless connection I can play lag free. Also if I disconnect the router and hook up directly to my cable modem I can play lag free.  SO I am fairly certain that the problem lies in my router settings..  Can any of you help me out? I don't have the slightest idea how to set up a router. I know the game says my Nat needs to be completely open while playing the game and that I should forward certain ports. I have no clue how to do either of that.. I will copy and paste some instructions from the forums for the game for you all to see. Thanks in advance for  any ideas.
    Brian
    Required Ports for Modern Warfare 2
    In addition to the required ports for Steam, Modern Warfare 2 requires the following ports for multiplayer:
    UDP 1500 (outbound only, no forward needed)
    UDP 3005 (outbound only, no forward needed)
    UDP 3101 (outbound only, no forward needed)
    UDP 28960 (inbound/outbound, must forward to act as a multi-player host, but no forward or inbound traffic needed to find and join games)
    Steam Client
    UDP 27000 to 27015 inclusive (Game client traffic)
    UDP 27015 to 27030 inclusive (Typically Matchmaking and HLTV)
    TCP 27014 to 27050 inclusive (Steam downloads)
    Dedicated or Listen Servers
    TCP 27015 (SRCDS Rcon port)
    Solved!
    Go to Solution.

    You don't really have to set up a static IP for your computer. All you got to do is reserve that IP in DHCP reservation on your router. Get the MAC address of your computer, put that in the DHCP reservation located on the setup page under Basic Settings. Choose the IP you want, within the scope of DHCP. Make sure to save it. So everytime you connect to the router, it will assign that IP to your computer.

  • Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

    Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
    And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

    The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

  • Does K8D Master-FT support Dual core Opteron?

    Hi,
    Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
    Thx, Xuekun

    Sorry I only looked after his question.
    The entire K8D-Master3 series has support for it: >>Link<<

  • Does Toshiba Multimedia Center support 5.1 via optical out?

    Hello, I have a question before I buy this...
    Does Toshiba Multimedia Center support 5.1 via optical out?
    I can find this out anywhere they only mention digital out but that could be coax.
    Can any of you help me?
    Thanks

    Hi
    As far as I know the Toshiba Media Center supports these feature:
    Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD
    _Ports:_
    1 x LAN - RJ-45
    4 x hi-speed USB - USB Typ A, 4-polig
    1 x audio *SPDIF output*
    1 x audio - line-In stereo port 3.5 mm
    1 x headphones audio output stereo port 3.5 mm
    Greats

Maybe you are looking for