Does my mac osx 10.4.5 leopard have 2.0 usb hubs or 1.1 usb hubs??

Hello,
Are all of the usb hubs on my new imac 2.0? I just purchased an audio interface for recording music and it will not allow multiple tracks to be recorded simultaneously if the hubs are 1.1. I need to know if I should return this interface and get a firewire. thanks for any help on this (I tried to find the answer myself by clicking on "about this mac" but nothing there about whether the hubs are 1.1 or 2.0... thanks again

Hi billyw: Assuming that your information about your system is correct in your signature, it will be USB 2.0 All iMacs since Sept. 2003 have used USB 2.0 If you are using an external USB hub, that is a different story.
Good Luck
Stedman

Similar Messages

  • Mac OSX 10.5.7 Leopard can not detect webcam

    Hello Support,
    I am using Mac OSX 10.5.7 Leopard in Safari and FireFox however Flash Player v 9 and 10 does not detect my isight webcam (firewire). I can not even change my settings to choose a webcam because the image that I get when I go to the settings is just a screenshot but not interactive. I have attached the picture.
    Does Flash player work in Mac OSX 10.5.7 Leopard Safari and FireFox? I get as far as the allow or deny button, then I get a error message saying that my cam is not detected.
    Can you please advise.
    Thanks in advance

    Man... gmax3100 have a POOR opengl performance under Mac Osx Leopard in 2d. It is NOT my problem but it is a known problem. Try to run some benchmark with gma950 and gma x3100.
    Macbook c2d 2.2 opengl performance x3100: 23.28
    MacMini cd 1.6 opengl performance gma950: 184.76
    it is a know problem:
    http://lists.apple.com/archives/mac-opengl/2008/Jan/msg00025.html
    http://forums.macrumors.com/showthread.php?t=446938
    http://forums.macrumors.com/showthread.php?t=448571
    http://forums.macrumors.com/showthread.php?t=403685
    ecc.
    exposè make 40fps and it is NOT fluid like a nvidia or ati card. Exposè is a simple animation, under arch linux and geforce3 (2001) is more more fluid respect leopard... and respect to tiger.
    with this hack:
    sudo defaults write /Library/Preferences/com.apple.windowserver Compositor -dict deferredUpdates 0
    exposè is much MORE fluid so it is a driver problem (because with tiger there's no problem!!)
    I have NO problem with my macbook.

  • How do I download a previous version of firefox for mac osx 10.5.8 (leopard)?

    How do I download a previous version of firefox for mac osx 10.5.8 (leopard)?

    Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher
    *System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4]   [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
    '''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
    *System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
    *Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
    *Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
    You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
    *Home page: http://www.floodgap.com/software/tenfourfox/
    *Developer's blog: http://tenfourfox.blogspot.com/
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • TA48312 How can I download Mac OSX 10.6 snow leopard

    Hi ,
    I use to Mac OS X v10.5.8 but I want to update to my MacBook and I need to Mac OSX v10.6 snow leopard... ???

    Welcome to Apple Support Communities
    Mac OS X Snow Leopard is not free. It can be purchased in a DVD at the Apple Online Store > http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Before upgrading, make a backup of your files onto an external drive with Time Machine. After upgrading, open  > Software Update to install Mac OS X 10.6.8, so you will be able to install iTunes 11.1.4.
    If you want to upgrade to OS X Mavericks, see > http://www.apple.com/osx/how-to-upgrade

  • Will Mac OSX 10.6 Snow Leopard work for a windows Computer....???

    hi. i am wondering if i could buy MAC OSX 10.6 SNOW LEOPARD and put it into my windows Computer and erase windows and put MAC on it? i just bought an. HP Pavilion Slimline about 1-2 weeks ago. and it has. AMD Athlon II X2. With NVIDIA Graphics With Cuda.... Will it work??? please let em know....

    Snow Leopard requires an Apple Macintosh with an Intel CPU. I doubt that even with extensive, license-breaking hacks you could get it to run on an AMD CPU.

  • Hi, Using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Any suggestions?

    Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light.  Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either.    In the past, quitting mail has worked, but not today... Any suggestions?

    Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light.  Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either.    In the past, quitting mail has worked, but not today... Any suggestions?

  • I'm installing Creative Cloud on a MAC OSX 10.6.8   I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

    I'm installing Creative Cloud on a MAC OSX 10.6.8   I have the 'installing window' displaying that it is about 95% complete but hasn't moved in 30 minutes; cannot quit it either...cancel button doesn't work, can't esc. What's up?

    I'm installing Creative Cloud on a MAC OSX 10.6.8
    You'll have to upgrade your operating system first.
    Most, if not all, Cloud apps require at least OS X 10.7.

  • Mac OSX 10.5.3 Leopard STANDARD Server CHANGEIP questions

    I am confused on how to check and change TCP/IP addresses via Mac OSX Leopard 10.5.3 server in STANDARD mode.
    I watched the great Sean Colins Lynda.com tutorial on OSX 10.5 Server, but i still have a few questions with how to deal with DNSs and CHANGE IP
    Here is the hardware & scenario:
    -- G5 Silver Doors Tower with 1.7GB Ram and Mac OSX 10.5 Leopard 10 user server
    -- Cablevision ISP with there BOOST service [that allows you to set-up a server and does not block ports 25 or 80]
    -- NO Static IP from Cablevison [they change it once in a blue moon when they want so I rely on DYNDNS below]
    -- Apple Airport TimeCapsule [with all latest firmware updates etc]
    -- DynDNS account and client software installed on server to update the DYNDNS severs with the current Cablevisions TCP/IP address
    Problem and Question
    ===
    Three times a year I will need to move this server. 1/3rd of year and at setup it is on residential Cablevision Account and Apple TimeCapsule Router, Then 2/3 of year server will be behind two funky large networks where I will have to set-up manual IP, DNS, and proxy info
    I need to know what the proper process is when I want to move the Mac. When the 10.5.3 STANDARD Server is in STANDARD mode can I just change the TCP/IP address in SYSTEM PREFERENCES...NETWORK ? Do I have to run the CHANGEIP command Afterwards [or Before]
    Also, for DNS config on server does it always need to have the loop back self reference [127.0.0.1] or can it just be configed from the Airport and/or network?
    And, big problem for now... dumbly when I set-up the OSX Server on the TimeCapsule Network I forgot to write down the TCP/IP address used. Now I am on the second funky corporate network and can't use the command:
    sudo changeip - idon't_knowip 10.0.96.48 server.cmtenyoffice.com server.cmtenyoffice.com
    Also, another question for the HOSTNAME... should it be HOSTNAME or FullyQuallifiedDomainName?
    My HOSTNAME seems to be "CMTE-Server.local" but I specified the FullyQualifiedDomainName to "sever.cmtenyoffice.com"
    NOTE: I do NOT have this domain registered and am not yet hosting a website or email server on this machine, but I may soon register the domain and then point MX records etc to the DYNDNS record that would point to server
    Anyhow, to wrap up,
    1- What is the proper process for changing the TCP IP address with a Leopard 10.5.3 STANDARD SERVER?
    2- What do I do with CHANGEIP command if I don't know what the STARTING TCP/IP address is?
    3- For HOSTNAME should I be entering the unregistered FQDN or the "CMTE-Server.local"
    Thanks for any an all info.
    -- Eric ZORK Alan
    -- Professional Poet & BED VLOGGER

    Hi Eric
    You use the one its using now.
    If the Server is Standalone issue:
    sudo changeip - oldIP newIP oldhostname newhostname
    Even if nothing changes you can still issue the command, supply the system admin name and password and let it do its stuff. Prior to doing this you must change the address in the Network Preferences Pane. Although not necessary it does not hurt if you restart afterwards.
    If the Server is an OD Master issue:
    sudo changeip /LDAPv3/127.0.0.1 oldIP newIP oldhostname newhostname
    You will not only be prompted for the system admin name and password but also for the Directory Administrator name and password. With both command you will get feedback as to what is going on. Obviously you will see more changes made if its an LDAP Server. Hostname will be the fully qualifed domain name (FQDN) defined in the DNS Service eg: myserver.mydomain.com.
    man changeip
    For usage. Actually prior to doing any of this and incidentally a good way of finding out not only the hostname but also the IP address associated with that name issue:
    sudo changeip -checkhostname
    You should run this before/after making the change. If everything checks out OK it should report 'the names match, there is nothing to change'. This is a good a test that lets you know its worked. However its not the only test. I would run host, nslookup and dig also. Next set a client to use the Server for its DNS and then test connectivity with firstly the Server's fqdn and lastly its IP Address.
    Ultimately the truest test is: "what impact has the change made on clients accessing the Server and its Services successfully?"
    If the Server is a mature OD Master (possibly PDC as well) with DNS, Mail, AFP, SMB, iCal and any other 2-3 additional services configured and running then issuing changeip may appear - superficially - to have worked. Occsasionally - in my experience - serious problems begin to develop with the LDAP database to the extent where the only 'cure' is to demote to Standalone, sorting out DNS and re-promoting. This can have serious repercussions if you have not made preparations to limit the re-build time prior to changing the IP address and issuing the command. Equally it can be successful. However can you take the risk?
    Tony

  • I Have mac osx 10.5.8 and have tried to update to mac osx snow leopard 10.6.3, but I constantly get the install failed message. What could be the problem?

    My imac is currently running mac os x 10.5.8. I've tried to install mac osx snow leopard 10.6.3, but have been unsuccesful because the disc fails to install.
    What could be the problem?

    noondaywitch wrote:
    You should boot from the Installer DVD by holding down the C key during start up until the Apple logo and spinning cog wheel appears. Allow plenty of time for the installer to appear - it can take several minutes when booting from a disc.
    I suggest not doing this unless the Apple recommended method (starting by double-clicking on the
    Install Mac OS X icon while booted up normally) fails.
    There are several reasons for this:
    The Apple method performs a check of the DVD's integrity before starting up from it. This can't be done if you start up directly from the DVD.
    The Apple method "phones home" using the current OS's network settings to check for updates to the incompatible items database included on the DVD & writes a lot of pre-install data (the 'Mac OS X Install Data' stuff) to the HD before restarting automatically from the DVD to finish the installation. This may not work as expected if you start up directly from the DVD.
    The pre-install data on the HD speeds up the installation process (because running the OS from the HD to build the data is faster than doing that while running from a DVD).
    The Apple method makes it possible to "gracefully" cancel the installation before the automatic restart occurs without leaving the existing OS on the HD in a corrupted, "half-installed" state unable to restart the Mac. This sometimes happens if the installation process hangs & one has to force-restart the Mac to recover. As long as this occurs during the "pre-install phase" before the restart, the existing OS should remain untouched & intact.
    Also note that the Snow Leopard installer is quite a bit more sophisticated than the previous ones like for Leopard or Tiger. It automatically performs the equivalent of Disk Utility's Verify Disk step before beginning the installation & performs more checks during the installation process (including checking the pre-install data for errors). It is usually not necessary to remove the "Mac OS X Install Data" folder after a failed installation, which may just cause the process to take longer on subsequent attempts, but if nothing else helps it is certainly something worth trying.

  • Mac OSX 10.5.8 Leopard & HP Photosmart 3180

    I have a HP photosmart 3180 and recently upgraded to 10.5.8 "still leopard". I recently looked to install this printer again on network, so I went to hp site and downloaded latest driver (marked 10.4, 10.5) downloaded and installed. Hooked printer up and everything seemed to work fine, until I tried to restart. Upon restart the MOUSE FREEZES and the Apple bluetooth app launched looking for my mouse?? The mouse freezes in upper screen. I tried a different usb connection, nothing? I tried to restart again, zapping pram, nothing? starting to get anxious (computer is less than year old & printer is only three years old) unplugged all usb devices and restarted again.....ok everything works again...plugged in printer ok....restart same problem. So now I have narrowed it down to the printer which for all intent and purpose is still brand new, maybe printed about 50 pages in all.
    Since I narrowed it down to be an HP issue, I called HP support. First they wanted $35 because my printer is TOO old for phone support, out of warranty. Was given an option to use chat support by operator. I tried Chat support and was told they do not offer chat support for Apple? (I was sent there by their operator that knew I was running Mac OSX) I was then offered email support, still waiting. During my conversation with HP representative I was basically told that they no longer support that model (because it's 3 YEARS OLD!) I could pay and upgrade to another printer. When asked about the HP policy and driver/hardware support for printers more than 3 years old, I was told " since they release so many new printers, they do not offer full support for hardware more than 3 years out."
    Have I lost my faith in Apple? NO it just reaffirmed that non-apple products and support are crap.
    They will not help you unless you pay another $35....in which case I was told again this is only "best we can do" help and will not guarantee that they can get things to work. Way to stand by your product, HP !!
    So, I will never by another HP product again as they refuse to stand by their own hardware past 3 years!, by their own admission. I can use the printer as long as I unplug it when not in use. lol

    Beginning with Firefox 4, Macs must have an Intel x86 processor (which you do NOT have; yours is a PPC Mac) '''''<u>and</u>''''' OSX 10.5 or higher
    *System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4]   [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
    '''''The good news''''' is that Firefox 3.6.24 still supports OSX 10.4 and Macs with the PPC Mac architecture. '''''The bad news''''' is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
    *System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
    *Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
    *Also see --> http://support.mozilla.com/en-US/kb/Installing+Firefox+on+Mac
    You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
    *Home page: http://www.floodgap.com/software/tenfourfox/
    *Developer's blog: http://tenfourfox.blogspot.com/
    *'''''VERY IMPORTANT'''''; '''read this carefully''': https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    '''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

  • Dreamweaver 8 install on Mac OSX 10.6 Snow Leopard

    Hi all,
    I have just done a fresh install of Mac OSx Snow Leopard (10.6) and am trying to install our copy of Dreamweaver 8 onto it. However I have now run into a few problems. Firstly it came up with an error message stating that some old format is no longer supported or something. I cant get the error message back up now, as now the CD will not mount within OSx!
    Can anyone assist with this? Thanks.

    Start by checking if you can run Snow Leopard:
    Requirements for OS X 10.6 'Snow Leopard'
    http://support.apple.com/kb/SP575
    OS 10.6 Snow Leopard is once again available for $19.99 from the Apple Store:
    http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
    and in the UK:
    http://store.apple.com/uk/product/MC573/mac-os-x-106-snow-leopard
    but nobody knows for how long it will be available.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard.
    To use iCloud you have to upgrade at least to Lion, but some functions are only available in Mountain Lion:
    http://support.apple.com/kb/HT4759
    You can also purchase the code to use to download Lion (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard), or you can purchase Mountain Lion from the App Store - if you can run that:
    http://www.apple.com/osx/specs/

  • Beginner to computers wheres the best place to start to learn terms/and working on new mac osx 10.6 snow leopard.

    any suggestions? i am truely a beginner  may have to take a class. some library books seemed a lillte over my head i am making alot of dumb errors like deleting/trashing wrong important stuff help please notice lots of videos, books etc but dont have much spare time...or which one of the many
    .... thanks much appreciated! i have a Mac OSX snow leopard 2010-macbook pro see i dont even know the right way for its name

    Any 101 linked to Mac really.
    I do keep a web site on iChat
    I may receive some form of compensation, financial or otherwise, from my recommendation or link
    9:59 PM      Saturday; May 21, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • NativeMenu not working on Windows XP but does on Mac OSX

    I have been trying to get NativeMenus to work on a AIR application for the last few hours.  On Mac OSX the menu displays fine but on Windows XP I do not see a menu.  Please advise?
    <?xml version="1.0" encoding="utf-8"?>
    <mx:WindowedApplication xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" width="500" height="400" creationComplete="Init();">
        <mx:Script>
            <![CDATA[
            import mx.controls.Alert;
            private function Init() : void {
                  var fileMenu:NativeMenuItem;
                  if(NativeWindow.supportsMenu)
                     stage.nativeWindow.menu = new NativeMenu();
                    stage.nativeWindow.menu.addItem(new NativeMenuItem("File"));
                    fileMenu.submenu = createFileMenu();
                if (NativeApplication.supportsMenu)
                    fileMenu = NativeApplication.nativeApplication.menu.addItem(new NativeMenuItem("File"));
                    fileMenu.submenu = createFileMenu();
            private function createFileMenu() : NativeMenu
                var fileMenu:NativeMenu = new NativeMenu();
                   fileMenu.addItem(new NativeMenuItem("New"));
                return fileMenu;
            ]]>
        </mx:Script>
    </mx:WindowedApplication>

    No one has any idea?

  • Why does Safari Mac OSX nor load my IWEB made webpages?

    i am confused, and maybe someone has a suggestion that can help - i created a site in iweb and it loads in all browsers EXCEPT safari in Mac OSX (that means it loads fine in safari Windows!)
    the first page sometimes loads but if you try the other pages the load progress bar shows but not the page. that the only way a page will load is if i click somewhere on it. many visitors don't realize this. after clicking the reload btn many times they leave the site.
    can someone help me solve this? the url is http://tunities.com

    I can view your site in Safari V 3.0.3.
    The problem is with the URL. Every page comes up as...
    http://tunities.com/
    .. whereas they should be...
    http://tunities.com/welcome
    http://tunities.com/playgrounds etc.
    The problem is with your server. Either your domain name has not been directed properly (masked maybe) or the index file is not in the right place.

  • Today's Mac OSX Update on Snow Leopard

    Device: MacBookPro 15 inch 2007
    OSX: Snow Leopard 1.6.2
    Updates: "HP printer drivers and Safari"
    I just update my System and after restarting it gave me an kernel error.. after reseting the nvram and pram it worked fine again, at least till now.. I just hope for the best :)!
    I just wanted you guys to know that this might happen if you update today.. or if someone faces the same issue that he will be prepared!
    cheers, Tom
    up

    Did you update to 10.6.2 via Software Update or did you download the combo? If you used Software Update, get the Combo updater instead and re-apply:
    http://support.apple.com/kb/DL959

Maybe you are looking for