Does my motherboar​d support wol

I am having an hp pavillion dv6580en notebook. As a part of my project i gotto implement Wake-on-lan function . i found that my ethernet card supports this feature and is enabled. But my bios doesnt seem to have this option . Therefore the power to my ethernet card is dropped as soon as i shutdown. Can i change this please help

Hi jitutoms,
Thank you for visiting the HP Support Forums. Since this is a duplicate post I'm going to lock this one, please check your other post here for replies:
Does my motherboard support wol
Thanks!
Wendy M - HP Support Forums Moderator
Click the Kudos star as a way to say "thank you" for helpful posts.
Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
Rules of Participation

Similar Messages

  • Satellite Pro L20 PCMCIA, does it support WOL?

    Does the L20's support Wake-On-Lan via the PCMCIA card bus, if i fit a WOL capable card?

    bum, i was hoping to build a super server, using an L20 with server 2008, 200gb 7200rpm hdd, 2gb of ram, and a gigabit PCMCIA card set to WOL. at the moment it pulls about 16W off the grid when idle, so if i could WOL it that would reduce when im not running it. thanks for answering anyway. are there any other sites which might have a definative answer? i might try notebook review. bye.
    Message was edited by: cypher007

  • Does my motherboard support wol

    I am having an hp pavillion dv6580en notebook. As a part of my project i gotto implement Wake-on-lan function . i found that my ethernet card supports this feature and is enabled. But my bios doesnt seem to have this option . Therefore the power to my ethernet card is dropped as soon as i shutdown. Can i change this please help

    Don't shutdown but use Sleep instead. Also, check in the Control Panel under Power Management, Advanced Settings and look for Wake Timers to be Enabled.   If your bios doesn't support WOL then you might not get it. Some wake states are not supportted by mobile platforms.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • Is Mac MINI support WOL after shutdown completely

    In PC environment,when the computer completely shutdown but connecting the power ,the lan card still have signal so that we can use the magic packet wake up
    Is Mac MINI support WOL after shutdown completely?

    No. The Wake on Network Access (WOL for PC terminology) only works if the Mac is sleeping, napping or hibernating.
    Ity does not work for a shutdown state

  • MOVED: Does MSI E350IA-E45 support AMD virtualization?

    This topic has been moved to Linux/Unix.
    https://forum-en.msi.com/index.php?topic=153096.0

    Thanks for pointing me in the right direction!
    It has a Realtek RTL8111E lan controller, which does support WOL.
    Willie

  • Does the 6600GT-VTD128 support video capture?

    Hi,
    I recently purchased an MSI 6600GT-VTD128 video card.  The product information seems to suggest that the card has video input capabilities, and there is an adapter that plugs into the card that has a number of connections, one of which is labeled S-Video in.  However, I haven't been able to get any video capture to work.
    Does the card actually support this functionality?  If not, what are the video input connections for?  If so, is there some documentation as to how to set it up?  
    So far, I tried installing the video capture drivers that come with the card.  I checked the manual.  I checked the MSI web site FAQs.  And I searched the forums.
    Any help would be greatly appreciated.
    Thanks,
    Daniel

    Thanks Richard.  Yes I do have a breakout cable like that.  Actually, I described it in my original message.  So, I am guessing from your message that you believe that the card should have the capability to capture video.  
    In my original message, I asked if there was any documentation on setting up the card for video capture.  The manual does not describe the procedure, nor does the MSI web site.  
    There are drivers on the CD that claim to be for video capture, but they had no effect when I installed them.  In fact, there appears to be no way to tell whether the drivers were actually installed successfully.
    If anyone out there has successfully used this card for video capture, please let me know.

  • HT4623 I have the original iPad, it does not seem to support ios6 and will no longer connect to iTunes WHY is this

    I have the oringinal ipad, it does not seem to support ios6 and will not connect to itunes, WHY is this?

    Start here... http://www.apple.com/support/iphone/assistant/itunes/

  • Does Photoshop CC not support touch on Windows 8.1 tablet?

    Does Photoshop CC not support touch on Windows 8.1 tablet? Stylus nor finger working on canvas. Have all the updates from Windows and Adobe.

    Photoshop does not have touch support. however some touch devices drivers have features the can be set to Photoshop Functions. For example
    Tablets that have drivers that use Wintab API for pen support can be used with Photoshop Brush Pen support.  Tablets that use Microsoft Ink API for pen support can not be used with Photoshop for Adobe does not have support for Microsoft INK API for Adobe states the INK  API lack features used by Photoshop Brush engine.

  • Does Sender Mail Adapter support "PayloadZipBean" module

    Hi everyone,
    I have a scenario where, I get the email with an zip file as an attachment and I need to extract this file and send across. There is no mapping transformation done here, only I need to forward the attached file to the file server.
    Zip file always contains 1 file and is a text file.
    so Its an Email to File Scenario.
    Can I send the zip file as it is without unzipping i.e., send the attachment as iit is to the file server?
    If I want to unzip the file, does the module "PayloadZipBean" support in case of sender mail adapter. ?
    Thanks,
    Varun

    Hi Varun,
    Use "PayloadZipBean " Module at Receiver Communication Channel  in the Module Tab Set the "Module Key.mode =  unzip"
    and Receiver communication Channel file should be "FileName.txt".
    http://help.sap.com/saphelp_nw2004s/helpdata/en/bd/c91241c738f423e10000000a155106/frameset.htm
    Regards,
    Naga.

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?

    Does 10.5.6 Support Dual displays for Radeon 9800 Pro Mac Edition cards?
    And is there driver updates for anyone using the all-in-ones HP printers...has anyone been able to use their scanners since the update? and has the dual screen support been added to avoid the blue screen on startup?

    The ATI Radeon 9600 PC/Mac edition 256 MB should work in the MDD G4. It has two DVI ports (one is dual-link and can support a 30" display). You will need adapters for ADC displays.

  • Does K8D Master-FT support Dual core Opteron?

    Hi,
    Does K8D Master-FT support dual core Opteron? I saw the latest BIOS was released at 2003/12/11 and said to support for all series of AMD Opteron(up to 248, SC, 2.2GHz/1M).
    Thx, Xuekun

    Sorry I only looked after his question.
    The entire K8D-Master3 series has support for it: >>Link<<

  • Does Toshiba Multimedia Center support 5.1 via optical out?

    Hello, I have a question before I buy this...
    Does Toshiba Multimedia Center support 5.1 via optical out?
    I can find this out anywhere they only mention digital out but that could be coax.
    Can any of you help me?
    Thanks

    Hi
    As far as I know the Toshiba Media Center supports these feature:
    Dolby Digital Surround, Dolby Digital 5.1, EAX ADVANCED HD
    _Ports:_
    1 x LAN - RJ-45
    4 x hi-speed USB - USB Typ A, 4-polig
    1 x audio *SPDIF output*
    1 x audio - line-In stereo port 3.5 mm
    1 x headphones audio output stereo port 3.5 mm
    Greats

  • Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?

    Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
    If not, is this an option under consideration?

    billqaz a écrit:
    Does PSE 13 (Mac) support arranging pictures by EXIF Date-Time Taken?
    If not, is this an option under consideration?
    It's the default sort order. You can choose chronological order( ascending or descending) or by Import batch or by filename. Contrary to older versions, those sort orders are available not only in thumbnail view, but also in Folders view and albums. In albums you can sort as you like 'custom order'. No difference in Mac or Win.

  • Does Final Cut Express support ProRes 1080p?

    Does Final Cut Express support ProRes 1080p?

    Hi(Bonjour)!
    ProRes codecs was introduced with Final Cut Studio 2.
    You can't create a ProRes sequence in FCE, but if you've installed the +Apple ProRes QuickTime Decoder 1.0 for Mac+ you will be able to import ProRes footage, but rendering or conversion will be needed.
    http://support.apple.com/downloads/AppleProRes_QuickTime_Decoder_1_0_forMac
    Michel Boissonneault

Maybe you are looking for