Does my printer have a hard drive

does the following printers have an internal hard drive
      m2727
      3330
      3380
      1200

Hi,
No what I can see:
http://www8.hp.com/h20195/v2/GetPDF.aspx/4AA3-8863EEE.pdf
My suggestion, do a Full factory reset and you will be ok:
http://www.svet-crnil.com/dokumentacija/hp%20930%20950%20reset%20instructions001.pdf
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Does the hp photosmart 8450 printer have a hard drive/internal memory?

i am disposing of this printer and want to be sure there is no personal information remaining.
This question was solved.
View Solution.

Hi Justwantono,
HP Photosmart desktop printers do not have an internal memory that stores scanned images, copies, or print jobs. Make sure any camera cards in the front slot have been removed.
I hope this helps.
Regards,
BethenyF
Click the Thumbs up to say thanks. Mark Accepted Solution if the solution solves your issue.

Why do I have 2 hard drives?

Why does my computer have 2 hard drives listed in the storage section? I am running low on storing and it looks like the other hard drive is not even being used (Mac HD2). How can I combine them or use some of the storage on the Mac HD 2?

Hi, sorry it has taken me so long to reply. Here are the screen shots. Also, it is an iMac 21.5 inch, mid 2011.

Does the iPad 2 have a hard drive?

Does the iPad 2 have a hard drive?

It will either have 16, 32 or 64 Gigabytes of memory. You cant access it like a harddrive but there are apps on the App Store that will make it act like a flash drive to hold files.

Does macbook have to have internal hard drive to boot?!

As i'm having partition problems with the aftermarket hard drive installed in my macbook, I am resigned to re-partitioning it to install SL and restoring from time machine.
However, the old stock hard drive I have is in a caddy, I kept it as a backup incase anything ever goes wrong, then I can just boot straight back into a copy of OSX 10.5, last night I managed to install SL on this drive etc,
So i'm wondering is it possible to boot the macbook from the USB Snow Leopard drive, then at the same time in a seperate caddie, re-partition the other hard drive so I can perform a fresh installation?
Complicated I know, but i've looked into other areas and it appears this is going to be the only way!
Comments, advice and suggestions welcome

I can confirm that the macbook does not need a internal hard drive to boot, I booted using the factory hard drive in a USB caddie, and then installed Snow Leopard via another USB caddie
thanks for the help Matt

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

Is there any way to create a time machine backup to an external hard drive with content already on it? I have a hard drive that i have used for pictures but when i try to run a backup it says i need to start from a blank drive. Can i get around it?

It would be much better if you had separate drives for the pictures and Time Machine backups.....but, if you want to use the same drive for both purposes, temporarily move the folder with the pictures to another location for safe storage.
Run the Time Machine backup on the hard drive and verify that everything is working correctly. Time Machine will format the disk for you in Mac OS Extended (Journaled) as part of the backup process.
Then move the folder with the pictures back to the hard drive with the Time Machine backups.
When you have tested to make sure that everything is working again, then and only then should you delete the folder with pictures from the temporary storage area.
Again....it would be much better to keep Time Machine backups on a drive just for that purpose, and other data on another drive for that purpose. This is clearly one of those times when the fact that you can do something does not mean to imply that you should do it.

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device

I already have a hard drive connected to my airport extreme, and ws wondering if i could use it as a network storage device. If so would I have to format it with two partitions , one for time machine and the other for network storage. Aprreciate any advice

If you have the hard drive connected to the AirPort Extreme....it is a network storage device.
One issue that you may want to think about is that Apple does not support Time Machine backups to a hard drive at the USB port at the AirPort Extreme.
In spite of this, some users who try this are able to make it work. Others have some limited success and some have no success.
It's not supported....so there will be no help from Apple in the event of problems.
If you decide to proceed with this, make sure that the partition for Time Machine backups is formatted in Mac OS Extended (Journaled) as other formats will not work with Time Machine.
Having a secondary backup plan would also be something that you might want to consider.

When I reboot my mac it automatically launches disk utilities. i have run the utility. all clear. but each time i reboot i get the disk utility. how do i override so i can have my hard drive back?

When I reboot my mac it automatically launches disk utilities. i have run the utility. all clear. but each time i reboot i get the disk utility. how do i override so i can have my hard drive back?

What OSX version is it?
Does holding alt key at bootup show any boot choices?
Does holding Shift key at bootup to boot in Safe mode do the same thing?

Help I had to have my hard drive replaced!

Hi
Last week I had to have the hard drive on my laptop removed and replaced with a new one. I'll be honest I am not so good at tech stuff but did get an ipod guide book, and before comp went kaput I thought I saved my songs to DVD, however I have no clue how to retreive them. When I first plugged in my ipod and itunes window came up it asked me whether I wanted to replace the old library or something. So I clicked yes.
So I guess 2 issues. One is that now I try to disconnect my ipod from itunes it says it cannot be ejected as it contains files that are in use by another application. What does this mean?! And the other is trying to get my old library of songs back.
I honestly don't have a clue! But I need to disconnect so would appreciate any help asap!
Thanks

"I thought I saved my songs to DVD, however I have no clue how to retrieve them"
Depending on whether you saved your files to DVD in folders or just as a group of files, put the DVD into your computer, open iTunes and go to Add folder to Library or Add File to Library. Navigate to the DVD and add your files back into iTunes: About the Add to Library, Import and Convert functions
"now I try to disconnect my ipod from itunes it says it cannot be ejected as it contains files that are in use by another application"
By any chance do you have McAfee ActiveScan or any other disk scanning software installed on on your PC? If so try switching it off before you eject.

What does Apple do with replaced hard drives?

My PowerBook G4 hard drive crashed just over a year ago, taking with it all of my Master's essays and assignments. They replaced it under Apple Care in Mexico City (I was living in Mexico at the time), but would not let me keep my old hard drive to recover the data. I still have the hard drive number and serial number. Is there any way to get it back after all this time? Where does Apple send old hard drives?

vaneska:
Welcome to Apple Discussions.
I am sorry that you lost all of your very valuable data. It is very unlikely that the HDD is recoverable anymore. It would have been better to try to recover the data before sending it in, but, of course, it is too late for that now. Indeed, it would have been even better if you had a reliable backup of your computer, and although it is too late for the information already lost, it is still a good idea to do regular backups of everything you can't afford to lose, preferably on an external Firewire Hard Disk Drive.
Good luck.
cornelius
Message was edited by: cornelius

HT4236 I HAVE 2 HARD DRIVES ON MY LAPTOP. MY PHOTOS ARE ON 1 HARD DRIVE & MY ITUNES IS ON ANOTHER HARD DRIVE. I AM HAVING TROUBLE SYNCING THE PHOTOS FROM THE SEPERATE HARD DRIVE ONTO MY IPOD TOUCH. ANY HELP?

I HAVE 2 HARD DRIVES ON MY LAPTOP. MY PHOTOS ARE ON 1 HARD DRIVE & MY ITUNES IS ON ANOTHER HARD DRIVE. I AM HAVING TROUBLE SYNCING THE PHOTOS FROM THE SEPERATE HARD DRIVE ONTO MY IPOD TOUCH. ANY HELP?

There is a whole lot of bad going on there.
There are problems both drive errors and USB errors. I don't believe it.
I have a hunch the drive is starving for power.
USB devices are supposed to function all the way down to 4.25V. Not all do.
USB ports are supposed to be able to deliver 4.25V at the end of the cable at 500mA. Not all do.
USB 2.0 devices are not supposed to draw more than 100mA unless they negotiate for more. Some violate that.
USB 2.0 devices are never supposed to draw more than 500mA. Some violate that. Especially disk drives.
My guess is that your drive is drawing excess current and the voltage drop through the port and cable are dropping you below 4.25; or at least below the voltage that your drive goes "Tango Uniform"[1]. Does your drive have the option for external power? If so try it. Following up on wtx's comment; USB 3.0 is capable of delivering more power. Also, some drives have used a cable that violates just about every aspect of the USB specification: A "Y" cable that plugs into two host ports to provide more power to the guest. I despise this solution with every fiber of my electrical engineering existence; never-the-less, you might try one.
edit: [1] Teats Up.
Last edited by ewaller (2015-04-04 17:02:04)

Rescue and Recovery 4.5 Incremental backup reverts to LOCAL when i have 2nd hard drive

I have 2 hard drives.
Installed R & R 4.50.
Set 2nd hard drive as Store Location.
Initial "scheduled" full back up goes to my D drive. (This does NOT use the windows task scheduler).
During next Incremental backup (set by the back up at this time setting), it reverts back to local drive,
and does another FULL backup to my C drive folder RRbackups.
Problem is windows Task Scheduler is NOT set, under TVT folder task, to backup up to 2nd hard drive.
I edited Task Scheduler to change folder TVT, task launchRnR, actions from:
start a program %R%/rrcmd.exe BACKUP location=L name=Scheduled   scheduled
to:
start a program %R%/rrcmd.exe BACKUP location=S name=Scheduled   scheduled
otherwise, all works fine. Such a Major bug. Anyone else having this problem?
Solved!
Go to Solution.

I recently Reinstalled R and R 4.50. Same bug as i noted. The entry in the windows task scheduler is INCORRECT.
For those backing up to a 2nd hard drive, use my Solution. The initial BASE backup will go to the correct
backup location. Subsequent Incrementals use the Task scheduler to kick off the backup .. I do not know what
the parmeter is to point to a USB drive. Location = S is the correct parmeter to back up to a 2nd hard drive.
Control Panel>Administrative tools>task scheduler>tvt folder
Entry "LaunchRnR" select this entry. Right click this entry. Properties. Choose the Actions tab. Then EDIT.
You will see ADD arguments(optional); entry block will contain
BACKUP location=L name=Scheduled scheduled
Change location=L to location=S. Click OK. Next run should go to 2nd hard drive. Major Flaw!
===
During Initial 1st time run of R&R, it will ask. you have NOT taken a backup, back up now? Reply NO.
If you reply YES, it will go to your C drive, since you have not changed your backup location.
If you replied YES, you have a base backup on your C drive. If this happens, Delete the base back up.
Go to set schedule parm, choose time and day, and location 2nd drive. It will then ask do you want to back up.
Reply YES, IT will go to the 2nd hard drive. THEN the bug shows up when incrementals start.
Change windows task scheduler as noted above.

HT1436 I have two hard drives on my G5(2004). How do I get to choose which hard drive is the start up disk when I turn on the computer? Is it the shift key I hold down?

I have two hard drives on my G5(2004). How do I get to choose which hard drive is the start up disk when I turn on the computer? Is it the shift key I hold down?

depending on which model of G5 and OS installed will depend on whether a key command will work
alt at start up may work, if it does not, use the start up disc setting in;
apple menu > system preferences > system > start up disc
of course, the second drive must have a compatible OS installed for it to be able to boot.

LR 5 does not recognize my external hard drive. It has recognized this drive in the past. No help at any Adobe site.

LR 5 does not recognize my external hard drive. It has recognized this drive in the past. No help at any Adobe site.

My external HD contains photos I have worked on in the past.
Additionally, I have added photos to LR5 directly onto my Mac HD. (38
photos added when working in the absence of my external HD)
Presently, in the Library mode, the Le Cie external HD is not seen in the
upper left hand corner "Source" location.
The only way to "see" the La Cie HD and its photos is in the "Import" mode.
These photos have previously been imported.
I wish to use the La Cie HD as my source in the Library mode and proceed to
the Develop mode.
In other words, work on my previously imported, previously worked on
photos, now on the La Cie.

Does my printer have a hard drive

Similar Messages

Maybe you are looking for