Does my TM2 support a firewire card

Hi,
Does someone know if my TM2 supports a firewire card? Thanks.

No there is no practical way to add a firewire card. You have no expressport slot. There is such a thing as a usb to firewire adapter but they tend not to work very well for video capture.
http://www.amazon.com/IEEE-1394-FireWire-Female-Adapter/dp/B007DNHQPE/ref=sr_1_2?ie=UTF8&qid=1373819...

Similar Messages

Does Logic 9 Support FCP Capture Cards?

Does Logic 9 support FCP video capture cards for audio in an out?
I have a Blackmagic Decklink Extreme, analog ins/outs as well as digital AES/EBU
Didn't have much luck with Logic 8 and the FCP cards so I used my Line 6 GuitarPort but it only has one 1/4" phono input.
FutureX

Hi FutureX,
I would suggest you ask your question on the FCP forum if you don't get any reply here. Maybe you'll find someone there who can be of help. In any event, i doubt that buying an MBox with PT LE will meet your requirement for FCP capture cards, really!
Apple won't respond to you here. That's not the place. This is a user forum. You could also call a production studio in your area and ask politely to a pro who's working with that stuff on a daily basis. I'm sure you can find someone. Good luck...

Does the N96 support 32GB microSD card?

Can this phone support SDHC cards with >8GB of space?
If not do you know of a phone that does have large capacity (or upgradable) for music, and supports tethering in addiiton?

It can accept 16gb cards without any issues and in theory it should accept 32gb cards.
I'm sure we will find out for certain once 32gb cards become widely available to the consumers.
Message Edited by psychomania on 21-Jan-2009 12:40 PM

Does Iphone 4 support regular sim cards ???

I need to know if Iphone 4 support a regular sim card or it's necesary to have a micro sim card.
Moises

Thank you David !!! I got an unblocked iphone 4 and the company that gives me the services in Panama doesn't handle micro sims.... To bad.. I guess I need to change supplier.

Does Oracle Portal Support text/v-card content Type

I would like to display some text/v-card format information (generated by servlet) within the portlet. And I defined in the porvider.xml something like this:
<renderer class="oracle.portal.provider.v2.render.RenderManager">
<contentType>text/x-vcard</contentType>
<showPage>/servlet/VCard2</showPage>
</renderer>
I was always get the error messages as "Renderer improperly configured. It's missing a showPagefor type".
please give me some suggestions on how to render the vcard content within the portal page.
Thanks a lot

Can you let us know the config.cfg entry in your Environment for SearchIndexerEngineName.
Is it SearchIndexerEngineName= DATABASE.ORACLETEXTSEARCH ? It should be as below
SearchIndexerEngineName=ORACLETEXTSEARCH

Iphone5 support dual sim card

Does iPhone 5 support dual sim card?

bhazel wrote:
if you buy it unlocked
Do you understand what a dual SIM card is?. It means the phone has 2 numbers. iPhones have never been compatible.

Does Lightroom 5 (CC) support tethering for a Nikon D1x with a Firewire Card on Windows 7?

Our company wants to use an older, but fully functional, Nikon D1x and tether it to a Windows 7 Workstation with Adobe CC and a FireWire card installed. Will Lightroom 5 recognize the camera and allow us to manage workflow in a tethered setup, complete with photo taking and instant importing?
Thank you,
Jim

Hi Hal,
Thanks for your response!
I noticed that this list only shows versions of Lightroom 3 and above. Would a D1x have found compatibility with an older version of Lightroom? If so, might this compatibility be carried forward?
In either case, what third-party applications might you suggest?
Thanks a lot,
Jim

Does Tecra M2 supports SD HC 4GB cards?

Does anyone know if the SD slot on the tecra m2 will support SDHC 4Gb cards??
Cheers. Dave

Hello Sunset
Unfortunately I dont have SDHC card but I can confirm that Tecra M2 can read usual 4GB SD card. I have tested it with Transcend 150x SD card.
If you will find out something about compatibility with SDHC card please let me know.

Does VI Logger software support M series cards?

Software spec says the software supports E series cards etc. - but does it support newer M series also?

The current version of VI Logger (1.1.1) does not support M-Series boards, it only works with E-Series, 435x and FieldPoint. Since M-Series is obviously the next big thing, I imagine VI Logger will support them soon.

Does Equium M70 support 4GB or 8GB SDHC card

Could anyone help please?
My laptop reads standard sd cards fine (1gb),
However i want to buy a 4gb or 8gb SDHC card to transfer pictures from my camera onto my laptop and then onto my ipod.
Cant find any info in the manual
Any replies really appreciated
Thanks, Mark

Hi!
The Equium M70 supports only SD cards up to 1GB so SDHC cards will not work.
You can find this information in the user manual. I have checked it and so I know this.
If you dont have the user manual you can download it on the Toshiba website.
Bye

To capture the Mini-DV file through the 1394 firewire card from t

hii there!
first let mi make you understand what we people are doing ....
We people want to capture the Mini-DV file directly through the 1394 firewire card from the sony camcorder in to the MPEG2
format. Thent on the fly(i.e.during capturing into MPEG2) we also want to capture the metadata i.e (time,date etc. of the
original shooting event) into some text file. Our MPEG2 format requirements are: 8mbps viedeo,freq-48KHz,16 bit sterio,384
audio kbps, Deinterlace... we are using JavaMediaFramework-2.1.1e(Java Media Studio tool)..so we want to explore that tool
much more coz rightnow it's not supporting MPEG2(only supporting MPEG1) and also not supporting 1394 cpture card ...we want
the codec for converting DV-AVI to MPEG2 with date and time exctrated and much more explored details about JMf2.1.1 JavaMedia
Studio to get more familiar.....
for the above mentioned problem I am trying to add the mpeg2 codec inthe plugin of the jmf studio..and i have followed the
steps ..
Download the Codec from IBM
Extracted jmf.jar
Extracted codec.zip
Added files from codec folder to jmf folder
Made a jar out of it and name it jmf.jar
Replaced that with current jmf.jar (kept a backup)
Opened JMFRegistry and in "Plugins","Codec" and now unable to add " "
this becoz i am not knowing the exact way of recopiling that newly created jar file and because of that that mpeg-2 codedc is
not get added .....so i am looking forward for any help for the above mentioned problem!
I would be gratefull on getting ur help coz it's such challenging and techy concept to explore...
thanks..
nilesh hardikar
contact: [email protected]

I understand your pain. See BUG ID 4640032: JMF does not support DSVD encoding
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4640032
Add your vote, maye Sun will hear!

LACIE HD'S WONT MOUNT. APPLE THINKS I NEED A SEPERATE FIREWIRE CARD.

I have 2 lacie hd's that will not mount they used to mount but now they will not. I have been back and forth to the Mac store and I have been on the phone with Lacie . My drives were tested and my computer was tested and nothing is wrong WITH EITHER. Apple seems to think that my fire wire bus on the computer may be interfering with the HD's and thats why the will not mount. They also said for me to install a fire wire card to just completely avoid using the fire wire ports on my Mac. Does any of this sound normal to you guys? And whats a good fire wire card to buy? Should I just stick with the Lacie brand since I have two lacie HD's?

I'm not sure if this would cause a problem, but you might want to check the filesystem of the hard drive. If it is something other than HFS or HFS+ (these are the apple filesystems) then it might not mount as well, but apple is known to support most filesystems so I don't know if that's the case.
If you want to purchase a firewire card you should go snoop around on www.macsales.com just go into the firewire section, and then into the pci/pcmcia sub section. You did not specify as to which firewire you are in need of (400 or 800) but you can check out that website to see what the deal is.
Also, I HIGHLY recommend the OWC External hard drives if you do not enclose them your self. OWC is www.macsales.com and I have a couple of their external drives (one standard 200GB and one 500GB dual RAID). After a couple years of use, I have never had a problem with my OWC hard drives (well the drive itself isn't made by them, but the enclosure is.)
Anyway, I've been ramblin on and on way too much, but I hope I could have been some help.

Cannot use Firewire Card on 10.2.8 OSX Wallstreet G3

I recently upgraded my G3 Wallstreet to 10.2.8. It currently has a minimal set of applications and I added Firefox which seems to run fine. Internet connectivity is great!
I bought and Adaptec AFW-1430A Firewire for Notebooks PCMCIA card. It came with a CD which just has OS 9 installer and extensions.
The card is recognized by the PB but the menubar icon drop down shows it as 'Unknown Vendor' (grayed out) and 'Firewire Controller' grayed out. The only option is 'Eject Card', which works fine.
I contacted their tech support which told me that the drivers for the card should be in OSX.
How can I figure that out?
Also, someone they asked me what my boot ROM is. System profiler doesn't show a boot room ID.

footie,
I have a cheap FireWire card and it is not be recognized by the Wallstreet in 9.x unless the card is present and I restart. At this point, my FireWire HD is hot-swappable; I can mount/unmount it as long as the FireWire card is not removed...then I have to restart to get the card mounted.
The same card has no issues in 10.x, meaning the FireWire PC card itself is hot-swappable. However, perform a restart to cover all bases.
If you are working in OSX and the HD is not mounting...
- Do you have the Finder Preferences set so HDs appear on the desktop? If not, the FW HD should still appear in a Finder window.
- Is this a known-good HD?
- Are you using the correct and known-good FireWire cable?
- With the FW HD connected, open your System Profiler and see if the HD is reported.
- Launch your Disk Utility in the Utilities folder. Does the HD appear in the left column?
- If you have installed the extensions for FireWire in 9.x, see if the FW HD will mount. These are the three necessary extensions:
FireWire Enabler
FireWire Support
FireWire CardBus Enabler
Once they are installed and you have restarted, check your Extensions Manager to make sure they are enabled (they should be default).

Camcorder video error: "Unable to record. Resolution not supported by memory card."

We purchased two Samsung Droid Charges the first day they were released and recently they've both been getting this error after 8-15 seconds of recording in HD (1280x720): "Warning: Unable to record. Resolution not supported by memory card."
Called Verizon tech support, but they referred me to Samsung. Not knowing much about micro SDHC cards, I was alarmed to discover that the factory pre-installed 32gb card is only rated class 2 for speed. Samsung told me you need a minimum of speed class 4 or higher to record at this resolution. The only problem is you need an SD card installed in order to use the camcorder, period. In other words, all of us who payed an arm and a leg for the best phone Verizon sells now have to go buy our own micro sd card that actually supports all of the phone features as advertised?! The lowest prices I've seen for the faster cards are $70. Are we the only two Charge owners experiencing this problem? I've read somewhere that lower speed class cards may initially support faster speeds than they are rated until they accumulate more files, so the problem may go undetected for some time until you have more files that are stored in different locations on the card (making them difficult to access at the faster speeds). This may explain why are the first ones to get this error since we've had the phones the longest and only 50% free space remaining on the SD card. Oh, Samsung also said they won't be able to replace your card for one that has the proper speed rating. Kind of seems like false advertising to say a feature is available (HD camcorder), and then not mention the fact that the memory card provided isn't sufficient for that feature (separate upgrade required). Anyone else sharing the same frustrations? Ideas?

Thanks for the response. I've tried everything on that page. It's not an issue with the cable, or firewire port or the cable being connected properly, as the iSight camera works fine with iChat. I've disconnected the only other firewire device on the computer, didn't make any difference. Camera works fine in iChat, so it's not the camera itself. And, as I mentioned in the post, the same camera, if hooked up to my laptop, works just fine recording in QuickTime. So, it appears to be an issue with the QuickTime installation on this computer. I've done a search for the same error I'm getting and found some other occurrences with the same problems, but none that offered a solution.

PCMCIA firewire card for G4 laptop (follow-up to excessive timecode breaks)

1.) It was recommended that I get a new firewire bus to resolve excessive timecode breaks when importing from a Canon camcorder to an external hard drive. I've been reading through posts on this topic...and saw getting a new firewire port mentioned a few times... How come when I called Apple to check on the cost of a new firewire card for my laptop Powerbook G4, I was told that nothing could be added without replacing the entire logic board? Am I missing something? I didn't say "PCMCIA firewire drive" - is that something special? Any idea of the cost to purchase and install?
2.) Apple recommended just capturing to my internal hard drive, and transfering the projects. Apart from this being cumbersome... I need a little verification: if I transfer PROJECT X to my external hard drive, then do I also need to transfer my Audio Render, Autosave,Capture Scratch, Render, Thumbnail, and Waveform folders? [I realize this is basic, but I'm wary of losing the information the project needs and getting it all messed up]
Powerbook G4, Mac OS X (10.3.9) FCP 4.5, LaCie external HD
Powerbook G4, Mac OS X (10.3.9) FCP 4.5, LaCie external HD

http://www.bhphotovideo.com/bnh/controller/home?A=details&kw=BEAFWT2&is=REG&Q=&O =productlist&sku=304014
pcmcia is an card slot. If you have a 12" PB you may not have one.
If you have a pcmcia slot, buy the card. Slide the card into your computer and start up. Put the camcorder on the card and your fw drive on the port built-in to your computer. Even if this does not solve the timecode issues, it will save you other headaches in the future.
Question. Does capturing to your internal drive solve the timecode issues you are having?
I disagree with the advice of capturing to your internal drive and transfering the project after the fact. There are a bunch of reasons why, and all of them are qualified, so I hesitate to go further until I know whether or not capturing to the internal drive is making your timecode headaches go away.
I suspect capturing to the internal drive will not help the timecode issues which will make the whole point moot. But hopefully I'm wrong :>
Tom
ps
When you talk to representatives from Apple, you have to be conscious that if they are not specialists in the area you are focused on their advice may be based on general recommendations from an IT or home user perspective. There is a difference between talking to a sales person on the floor of the Apple Store and someone from the Genius Bar. And the person at the Genius Bar may have a tremendous background in network installations, but never have opened FCP. Or you might get lucky and get a FCP savvy genius, who would be a bit weak when talking about some other area.
This is not a knock, just a reality. It is difficult to be deeply conversant with even one area. It is not realistic for the generalists you usually deal with to know the best answers to very specific questions.
I'm working toward becoming a certified trainer with FCP and it is not easy or cheap to become an expert at this one application, never mind all the possible applications and hardware combinations for wildly different needs and budgets.

Does my TM2 support a firewire card

Similar Messages

Maybe you are looking for