Does N9 support this type of MfE url ?

Hi!
We run a Lotus Notes Traveler server to sync our mail and calendars.
Does N9 support this kind of URL: ?
server_name:XXXXX/servlet/traveler
Where server_name is the server name, XXXXX is the port number, and then the server url.
At least in Nokia E72 and E6 it doesn't work (but i tested and iPhone 3GS and  Samsung Galaxy SII and it works fine in both).
Regards and thanks.

Hi Patrick,
May be the followng thread will solve your problem.
/thread/24147 [original link is broken]
Thanks,
Ramakrishna

Similar Messages

  • "...does not support this type of alias."

    I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
    What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
    Thank you in advance,
    Lloyd

    Barry,
    I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
    This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
    Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
    Thanks,
    Lloyd

  • Error : software component version does not support this object type.

    Hi ,
    We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR  .
    How can we solve this error.
    Regards,
    Syed
    Edited by: Umar Syed on Jun 11, 2009 12:01 PM

    Hi Srinivas,
    We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
    Once we login to our ESR from index page we have this option to choose
    Available Profiles :         Process Definition
                                       Service Definition
                                       Unregistered.
    We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
    Regards,
    Syed

  • What is native Sql data types and does oracle support this?

    what is native Sql data types
    Does oracle support this?

    http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/datatype.htm#g31099

  • Error: Driver does not support this function

    Hi there people!
    I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
    <%@ page import = "java.sql.*" %>
    <%@ page import="java.io.*" %>
    <%@ page import="java.util.*" %>
    <HTML>
    <title>Stock Portfolio</title>
    <body>
    <body bgcolor="gray"><center>
    <table border = 1>
    <tr>
         <td><th>Symbol</td></th>
         <td><th>Type of Transaction</td></th>
         <td><th>Date</td></th>
         <td><th>Shares</td></th>
         <td><th>Price</td></th>
         <td><th>Stock Commission</td></th>
         <td><th>Stock Brocker Name</td></th>
    <tr>
    <%     String symbol = request.getParameter("symbol");
           String type = request.getParameter("type");
           String date = request.getParameter("date");
            String shares = request.getParameter("shares");
            int ishares = Integer.parseInt(shares);
            String price = request.getParameter("price");
            float fprice = Float.parseFloat(price);
            String commission = request.getParameter("commission");
            float fcommission = Float.parseFloat(commission);
            String bname = request.getParameter("bname");
    %>
    <% String url ="jdbc:odbc:Product";
       try
       { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
         Connection con = DriverManager.getConnection(url,"","");
         String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
          PreparedStatement pstmt = con.prepareStatement(query);
          pstmt.setString(1,symbol);
           pstmt.setString(2,type);
           pstmt.setString(3,date);
           pstmt.setInt(4,ishares);
           pstmt.setDouble(5,fprice);
           pstmt.setDouble(6,fcommission);
           pstmt.setString(7,bname);
           pstmt.executeUpdate(query);
          }catch (Exception e)
           {System.out.println(e.getMessage());
    %>
    </body>
    </html>      Thanks!

    Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
    [http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
    Read reply #5.
    It says
    You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck.

  • [unixODBC][Driver Manager]Driver does not support this function {IM001}

    Hello,
    I start from the end and details show below - this error message i got in sql session:
    SQL> select count(*) from EnergyType@ENERGOPLAN;
    select count(*) from EnergyType@ENERGOPLAN
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    ORA-02063: preceding 2 lines from ENERGOPLAN
    SQL>
    First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
    If its ok and HS are licensed for SE, then please see details of my problem:
    ----OS and packages version
    [oracle@aris_sv_db log]$ uname -a
    Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ rpm -qa | grep odbc
    [oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
    [oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
    unixODBC-libs-2.2.11-10.el5
    unixODBC-libs-2.2.11-10.el5
    unixODBC-devel-2.2.11-10.el5
    unixODBC-2.2.11-10.el5
    unixODBC-devel-2.2.11-10.el5
    [oracle@aris_sv_db log]$ rpm -qa | grep freetds
    freetds-0.91-1.el5.rf
    [oracle@aris_sv_db log]$
    -----ODBC.INI, ODBCINST.INI and FREETDS.CONF
    [oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
    [ENERGOPLAN]
    Driver = FreeTDS
    Servername = ENERGOPLAN
    Database = ess2
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ more /etc/odbcinst.ini
    # Example driver definitions
    [FreeTDS]
    Description = MSSQL Driver
    Driver = /usr/lib64/libtdsodbc.so.0
    #Setup = /usr/lib64/libtdsodbc.so.0
    #Driver = /usr/lib64/libodbc.so
    #Driver = /usr/lib/libodbc.so
    UsageCount = 1
    Trace = Yes
    TraceFile = /tmp/freetds.log
    [ODBC]
    DEBUG = 1
    TraceFile = /tmp/sqltrace.log
    Trace = Yes
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ more /etc/freetds.conf
    # A typical Microsoft server
    [ENERGOPLAN]
    host = 192.168.10.64
    port = 1433
    tds version = 8.0
    # client charset = UTF-8
    client charset = cp1251
    [oracle@aris_sv_db log]$
    ----CHECK CONNECT from ODBC
    [oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
    | Connected! |
    | |
    | sql-statement |
    | help [tablename] |
    | quit |
    | |
    SQL> select count(*) from EnergyType;
    | |
    | 8 |
    SQLRowCount returns 1
    1 rows fetched
    SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
    locale is "en_US.UTF-8"
    locale charset is "UTF-8"
    using default charset "cp1251"
    1> select count(*) from EnergyType;
    2> go
    8
    (1 row affected)
    1> [oracle@aris_sv_db log]$
    ----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    SID_LIST_ENERGOPLAN =
    (SID_LIST =
    (SID_DESC=
    (SID_NAME=ENERGOPLAN)
    (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM=dg4odbc)
    (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
    ENERGOPLAN =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
    ADR_BASE_LISTENER = /u01/app/oracle
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    ENERGOPLAN =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
    (CONNECT_DATA=(SID=ENERGOPLAN))
    (HS=OK)
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
    # This is a sample agent init file that contains the HS parameters that are
    # needed for the Database Gateway for ODBC
    # HS init parameters
    HS_FDS_CONNECT_INFO = ENERGOPLAN
    #HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
    HS_FDS_TRACE_LEVEL = DEBUG
    #HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
    HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
    HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
    #HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
    #HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
    #HS_LANGUAGE=american_america.we8iso8859p1
    #HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
    #HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
    #HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
    #HS_LANGUAGE=Russian_CIS.AL32UTF-8
    #HS_FDS_FETCH_ROWS=1
    HS_NLS_NCHAR = UCS2
    HS_FDS_SQLLEN_INTERPRETATION=32
    # ODBC specific environment variables
    set ODBCINI=/home/oracle/.odbc.ini
    set ODBCINSTINI=/etc/odbcinst.ini
    #HS_KEEP_REMOTE_COLUMN_SIZE=ALL
    #HS_NLS_LENGTH_SEMANTICS=CHAR
    #HS_FDS_SUPPORT_STATISTICS=FALSE
    # Environment variables required for the non-Oracle system
    #set <envvar>=<value>
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ tnsping ENERGOPLAN
    TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
    Copyright (c) 1997, 2011, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
    OK (0 msec)
    [oracle@aris_sv_db log]$
    ----CREATE DBLINK and test from sqlplus
    CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
    [oracle@aris_sv_db log]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
    SQL> select count(*) from EnergyType@ENERGOPLAN;
    select count(*) from EnergyType@ENERGOPLAN
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    ORA-02063: preceding 2 lines from ENERGOPLAN
    SQL>
    ----logs from hs and odbc
    [oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
    12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
    3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
    -7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
    Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
    Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
    Free hoada @ 0x14e5fd20
    Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
    Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
    type:0
    SQL text from hgopars, id=1, len=36 ...
    00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
    10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
    20: 22204131 [" A1]
    Exiting hgopars, rc=0 at 2013/04/01-16:30:42
    Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
    hgoopen, line 87: NO hoada to print
    Deferred open until first fetch.
    Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
    Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
    Allocate hoada @ 0x14e5fd80
    Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
    Entered hgopcda at 2013/04/01-16:30:42
    Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
    Entered hgopoer at 2013/04/01-16:30:42
    hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
    hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
    Free hoada @ 0x14e5fd80
    hgodscr, line 464: NO hoada to print
    Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
    Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
    Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
    Entered hgocomm at 2013/04/01-16:31:24
    keepinfo:0, tflag:1
    00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
    10: 32322E37 363237 [22.7627]
    tbid (len 20) is ...
    00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
    10: 312E345D [1.4]]
    cmt(0):
    Entered hgocpctx at 2013/04/01-16:31:24
    Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
    Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
    Entered hgolgof at 2013/04/01-16:31:24
    tflag:1
    Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
    Entered hgoexit at 2013/04/01-16:31:24
    Exiting hgoexit, rc=0
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
    Native = 0x7fff6ca974f4
    Message Text = 0x14e5f968
    Buffer Length = 510
    Text Len Ptr = 0x7fff6ca97750
    [ODBC][12117][SQLGetDiagRecW.c][582]
    Exit:[SQL_SUCCESS]
    SQLState = IM001
    Native = 0x7fff6ca974f4 -> 0
    Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
    [ODBC][12117][SQLGetDiagRecW.c][540]
    Entry:
    Statement = 0x14e399f0
    Rec Number = 2
    SQLState = 0x7fff6ca97700
    Native = 0x7fff6ca974f4
    Message Text = 0x14e5f908
    Buffer Length = 510
    Text Len Ptr = 0x7fff6ca97750
    [ODBC][12117][SQLGetDiagRecW.c][582]
    Exit:[SQL_NO_DATA]
    [ODBC][12117][SQLEndTran.c][315]
    Entry:
    Connection = 0x14dbd4b0
    Completion Type = 0
    [ODBC][12117][SQLGetInfo.c][214]
    Entry:
    Connection = 0x14dbd4b0
    Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
    Info Value = 0x7fff6ca9781e
    Buffer Length = 8
    StrLen = 0x7fff6ca9781c
    [ODBC][12117][SQLGetInfo.c][528]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLEndTran.c][488]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLDisconnect.c][204]
    Entry:
    Connection = 0x14dbd4b0
    [ODBC][12117][SQLDisconnect.c][341]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLFreeHandle.c][268]
    Entry:
    Handle Type = 2
    Input Handle = 0x14dbd4b0
    [ODBC][12117][SQLFreeHandle.c][317]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLFreeHandle.c][203]
    Entry:
    Handle Type = 1
    Input Handle = 0x14dbb0c0
    [oracle@aris_sv_db log]$

    To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
    - Klaus

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • CS3 Could not complete your request because Photoshop does not recognize this type of file.

    CS3 Could not complete your request because Photoshop does not recognize this type of file.   Also, all the jpg images I have open in preview only. The only thing I did different about the time these things changed, was upgrading to 10.6 on my mac. Hopefully I can fix this with your help!  I really appreciate it in advance.
    steeleart

    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See:  
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
         Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • "Exchange organisation does not support this version of Exchange server"

    I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
    I have already installed exchange Server 2010 in the that domain.
    The following the image that show the error that i am facing
    I have the checked current Active Directory or Exchange Server schema version by using
    Using that i got the following information
    "dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
    objectVersion = Windows Server 2008 RTM
    CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
    rangeUpper = 14726 ( Exchange server 2010 sp1)
    I am attaching the Exchange server setup logs here
    [5/31/2013 3:04:28 PM] [0] **********************************************
    [5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
    [5/31/2013 3:04:28 PM] [0] **********************************************
    [5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
    [5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
    [5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
    [5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
    [5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
    [5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
    [5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
    [5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
    [5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
    [5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
    [5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
    [5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
    [5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
    [5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
    [5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
    [5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
    [5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
    [5/31/2013 3:04:31 PM] [0] The following roles are unpacked: 
    [5/31/2013 3:04:31 PM] [0] The following roles are installed: 
    [5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
    [5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
    [5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
    [5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
    [5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
    [5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
    [5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
    [5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
    [5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
    [5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
    [5/31/2013 3:04:32 PM] [0] Applying default role selection state
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
    [5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
    [5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
    [5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
    [5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [5/31/2013 3:04:53 PM] [0] **************
    [5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
    [5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
    'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'  
    [5/31/2013 3:04:53 PM] [1] Beginning processing.
    [5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
    [5/31/2013 3:05:24 PM] [1] Ending processing.
    [5/31/2013 3:05:24 PM] [0] **************
    [5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
    [5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
    $true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [5/31/2013 3:05:24 PM] [1] Beginning processing.
    [5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
    [5/31/2013 3:05:27 PM] [1] Ending processing.
    [5/31/2013 3:05:40 PM] [0] End of Setup
    [5/31/2013 3:05:40 PM] [0] **********************************************
    Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
    Thanks

    dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine  install exchange 2010
    Exchange organisation does not support this version of Exchange server
    warning
    setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
    please can u tell me the how install exchange 2010
    thanks

  • DataSource does not support requested type

    hi,
    i have a question about BI bean.
    i use 9iDS 2 JDeveloper to create a JSP with BI beans.when i run this page,error message show in console window.like this:
    Log : Current DataSource does not support requested type: DataMap.DATA_FORMATTED : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
    Log : Current DataSource does not support requested type: DataMap.DATA_RATIO : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
    Log : Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
    Log : Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
    what's this? my server is 9.0.1.3,olap patch 9.0.1.2 .
    Thanks

    Hi,
    I have the same error occurring also. It happens when I try to drill down to a lower level within my BI BEANS application. As I am using a JSP to hold my BI BEANS this occurs on either a Bar Graph click or a Crosstab expension. I have both the Crosstab and the Graph linked.
    07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
    07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_FORMATTED
    07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_RATIO
    07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT
    07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE
    07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
    Regards,
    Scott.

  • SAML Credential Mapper does not support credential type

    Has anybody any idea on what could be causing the message below, which is being logged several times?
    <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
    <[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): **SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null**>
    Best regards
    Update: Forgot to mention this is SOA Suite 11G environment
    Edited by: user9501748 on Jun 28, 2011 11:53 AM

    I've got the same issue too.
    My setup is to have one domain acting as both Source and Destination.
    For every 10 seconds, I'm seeing 4 of these logs, and the CPU consumption is 100% consistently.
    ####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials: Subject initiator>
    ####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
    ####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null>
    Does anyone know what's happening? I've got one of the Security Provider = Active Directory, and thus there's no password returning. Could it be the root cause of the problem?

  • Does Oracle support this........

    Hi
    I want to select values in a object types in a table over the database link. like
    select name from [email protected]
    where name is of type varray(3) of varchar2(100) in the country table and db.com is database link.
    It is giving me error ORA-22804.
    Does Oracle supports this or not?
    Regds
    ~Sachin

    Your answer is in the message text - Oracle does not support object operations over a database link.
    null

  • The platform does not support this application, but does under other account

    Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
    Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
    I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
    I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
    Even when I try to run the app as administrator it keeps coming back with this warning.
    Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.

    Quote from: JLio01 on 11-December-14, 14:49:39
    1. What's your App version?
    2. What's the mobo/vga/specs of your son's pc?
    First of all thanks for the replies and future replies.
    1.
    Version 1.0.0.18
    2.
    My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
    If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
    Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
    I do know how to add permissions to the security tab have been doing that several years for some job I had once.
    I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
    The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
    And in case of trying a re-install of the App anyone got an url for a new version?
    Might have found it but it isn't on any MSI webpage.
    I did found something on Guru3D but I'm not aloud to post external links.
    Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
    So a clean url would be nice so to say.
    So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site

  • I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

    want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

    I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
    Thanks,
    Paul
    spid24s     Error: 28005, Severity: 16, State: 2
    spid24s     An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
    or you do not have permission.

    Hi Paul,
    I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
    So when his AD account got deleted, the database had NULL as owner
    Using the following query I asked for the owners of the databases:
    select name, suser_sname(sid) from master.dbo.sysdatabases
    So changing the owner of the databases that had a NULL owner solved the issue for me.
    use <databasesname>
    go
    exec sp_changedbowner 'sa'
    Thanks for triggering the solution.
    Peter

Maybe you are looking for

  • I RECEIVE E-MAIL. I CAN'T SEND.

    Hello, I have recently purchased an IPHONE4. I have configured my e-mail accounts. G-mail and business accounts. I'm receiving e-mail regularly. No problem at all. Instead, I can't send or just answer any. Common to all my accounts. I guess there is

  • Touchpad not functioning correctly

    I have an Envy 17,(Windows 7) and the touch pad is not functioning correctly.  I have had it do similar things in the past but they seemed to fix themselves after a few minutes, but this time it just keeps messing up. I CAN click on programs to open

  • Multi-Person iChat Video Quality

    Hi, I am using iChat with 2 other person (so a total of 3 people in the video conferencing). What we noticed is that the audio quality remains great. But as soon as the third person joins the video chat, the video quality decrease dramatically. Any o

  • SOAP request to XI via external application

    Hi, We have the following scenario: there is 3rd party application (Sending SOAP Request)->SAP XI->IDOC We are using sender SOAP Adapter,we have done the following: ->We have generated WSDL by using define webservice from Integration Directory. ->We

  • Problem in displaying navigation into portal

    Hi Guys, I have created one ume user test by login into portal as administrator and have given permission to System, Content and User Admin. Now, when i'm login into portal with this created test user, I'm getting problem. Clicking on Content Admin r