Does Netra T1 support external I2C inputs?

Hi
Does anyone know if the Netra T1 / Sunfire V120 supports a external I2C input? I am looking to use the Netra T1 to recieve a I2C input from a Alarm card in a seperate system. The I2C input will then be used to display a Alarm webpage on the Netra T1 / Sunfire V120. If it does which port do i use? Do I need a specific package installed?
Thanks

Sun-worshiper,
Thank you so much for pointing that out. I was loosing it.
Just in case someone else runs into this type of issue:
When you run probe-scsi-all please pay attention to the target. In order to boot from the DVD, I executed the following commands from the ok prompt:
ok nvalias dvd /pci@1f,0/pci@1,1/scsi@2/disk@4,0:f
ok boot dvd

Similar Messages

Does the iPad3 support external monitors, allowing you to scan across two screens?

Does the iPad3 support external monitors, allowing you to scan across two screens?

Some apps, such as Keynote, support different displays on the iPad screen and an external display. The iPad does not span it's "desktop" across screens, though; it only mirrors.
Regards.

Does Old imac support External optical drive

APple says that my imac mid2010 21.5" doesnt support external superdrive
but my iMac's built in optical drive has failed so can other external optical drives function on my mac beacuse there seems to be no way of using a disc in a mac whose internal drive has failed!. . . .

It doesn’t support Apple’s one but does support third-party SuperDrives.
(124155)

Does AirPort Extreme support external drives with Advanced Format (4K) ?

Hi!
I have an AirPort Extreme from 2008 and now i want to use a Raid 1 USB HDD for Time Machine.
The new disks often has the new "Advanced Format" (4K blocks).
Does this APE support such 4k drives?
At the moment i don't have any experience with this new format,
for this reason i don't know if the APE or the hdd case has to support this format.
regards
Sebastian

Sebastian Brandner wrote:
1) I'm using a simple USB Disk, connected to my APE, as Time Machine Backup Volume. This works quite well for about a year.
Yes, for a few folks it does appear to work for a number of days, weeks, or months. But sooner or later, the backups turn up corrupted, often beyond repair. It happens to me about eery 3 months, which seems fairly typical. That's likely why Apple doesn't support it, and nobody should depend on it.
2) The RAID Case shows only a single disk to the connected device, raid 1 handling ist internal and so it's again just a simple usb disk.
Correct. I didn't say otherwise. In a supported location, Time Machine will back up to a hardware RAID set (but not a software one).
3) The link with the supported disks doesn't handle the new disk format 4k. :-/ Maybe the support entry is too old.
Note that it's a 2008 Airport Extreme; that predates the support article by at least a couple of years.
But by all means, call AppleCare if you don't believe the support article.

FAQ: Does SpeedGrade CC support external monitoring?

Yes, SpeedGrade CC includes Adobe Mercury Transmit for external monitoring via selected third-party video I/O cards on Mac OS and Windows®.
More info:
Set up dual displays in Adobe SpeedGrade CC
Setting up Mercury Transmit in Adobe SpeedGrade CC

The Macbook does support dual monitors. I used it on the last presentation I did back in November of last year. It worked great. I did use keynote for that. Just make sure you set it up in the options of the slide show and it will work.
Hope this helps.

Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

Photos does not support external editing like iPhoto. Is there likely to be an upgrade to change this or will I abandon Photos for software that does support editing in Photoshop?

iPhoto does work and there is an upgrade:
Go to the App Store and check out the Purchases List. If iPhoto is there then it will be v9.6.1
If it is there, then drag your existing iPhoto app (not the library, just the app) to the trash
Install the App from the App Store.
Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Am I correct that Photos does not support external editors? i.e., in Aperture, I click Photos > Edit with.... and can open in Photoshop or various plug-ins. Changes are then automatically saved back to Aperture. Nonexistent in Photos?

Thanks Larry. That certainly gives me some understanding. Can't imagine I'm the only Aperture user with that concern, so I certainly hope Adobe and others will fill the void. Without that feature, Photos is pretty much a non-started for me.

Help!!! Installed Sound Card driver does not support Direct Sound input

I have just installed Premier Pro CS3 on a brand new PC. I am a new user and I am receiving a message "The installed sound card driver does not support direct sound input".
PC is a 3 GHZ Intel Duo
4 G RAM
2 x 500 G HD
Windows Home Vista Preminum
I am sure it is a simple fix and really appreciate any one given me the time or guidance to help get me started.
Many Thanks
Brendan

Thanks Harm for the prompt reply, nice one!
Sound Card is a "Realtek High Definition Audio"
Driver Version 6.0.1.5408
It was shipped with this Dell PC.
I checked the driver was up to date etc. So not sure what to do now.
Cheers

Does 2012 iMac support "4-pole (TRRS)"? *Audio related

I don't completely understand what "4-pole (TRRS)" is, so it would be better if I explained what I am wanting to do...
I'm looking to possibly get an Astro Gaming A30 headset to use with both my iMac and PS3. Normally, on a PC the A30 would connect via their "quick connect" cable to the PC's headphone and mic inputs, but since the 2012 iMac does not have a mic input, I asked Astro Gaming if there was another solution.
Below is my question to them and their response.
ME: I was looking into getting the A30s for mt iMac and PS3. I like the idea of the quick connect cable and was planning on having the mix amp plugged into my PS3 and when using the A30s with my iMac i could use them via the quick connect cable. However, the 2012 iMac does not come with a mic input... Is there a quick connect cable for usb instead? If not, what are my options?
ASTRO: Most iMac's feature a combined 4-pole (TRRS) connector which uses a single port instead of a seperate port for the audio and microphone. If yours features this (Apple support can verify), then you can connect the A30 Headset directly into the iMac and both the audio and microphone work correctly.
The A30 Headset features a single 3.5mm connector (TRRS) although we also include a PC Splitter which splits it into two separate connectors if needed which normally isn't for Mac's.

I think I was able to solve this myself... Once I got home I decided to test this with my iPhone 5 Earpods. I plugged them in and covered the iMac mic with tape. Covering the mic with tape turned out to be unecessary because once I plugged in the Earpods the "Input" device in the Sound settings changed from "Internal microphone" to "External microphone". I went on to test it by whispering directly into the Earpod mic and it registered on the input level. I then launched Ventrilo and confirmed that people were able to hear me.
I would like to see it documented somewhere, but my "test results" will have to do.

Bootcamp 3.1 & Windows 7 x64 - no external sound input, low speakers level

Hi all,
I just installed long awaited Bootcamp 3.1 update. I am rather disappointed.
The only thing that has changed is that the red light on the audio output is off. This thing actually bothered me the least.
External sound input line does not seem to work at all. No matter if mike or standard line device is connected. System recognizes that something is connected but there is no sound coming, level indicator does not rise.
Speakers level is still low. As far as I know all it takes to fix it is to alter some settings in the *.ini file. Someone did it and posted for other to download but why it is sho hard for Cirrus and Apple? What is the matter?
Is there any way to get sound output via Mini Port under Windows 7?
System does not even see such device.
Thanks,
Thomas

What about the iMac though? 2008 Model w/ Realtek to be specific. The audio is low and poor and I haven't even tried the audio out. I'm running Win7 x64 and everything works well aside from my audio and my external WD Studio FW800 drive disconnecting randomly with repeated directory changes. I can avoid that on my system... but the audio is a real disappointment. Makes me feel like I need an external FW sound card.

Attempting to install Solaris 10 on Netra t1 via external DVD-Rom

Hello Experts,
I am trying to install Solaris 10 on my Netra t1 via external DVD. I connected the DVD-ROM to the scsi port on the back. System recognized the DVD but does not allow me to boot from it. I have done many things without any success. Following are the details:
System info:
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.25 ME, 1024 MB memory installed,
Ran the scsi test and it doesn't report any issues:
ok test scsi
Probe-scsi-all shows the drive:
ok probe-scsi-all
/pci@1f,0/pci@1,1/scsi@2
Target 0
Unit 0 Disk SEAGATE ST318404LSUN18G 4207
Target 1
Unit 0 Disk SEAGATE ST318404LSUN18G 4207
Target 4
Unit 0 Removable Read Only device TOSHIBA DVD-ROM SD-M14011009
devalias also shows as cdrom1:
ok devalias
cdrom1 /pci@1f,0/pci@1,1/scsi@2/disk@6,0:f
cdrom /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2:f
ide-disk /pci@1f,0/pci@1/pci@1/ide@e/disk@0:f
ide-cdrom /pci@1f,0/pci@1/pci@1/ide@e/cdrom@2:f
ide /pci@1f,0/pci@1/pci@1/ide@e
I created devalias manually also with no help. Following is what I get when I try to boot from it:
ok boot cdrom1
Resetting ...
Netra t1 (UltraSPARC-IIi 440MHz), No Keyboard
OpenBoot 3.10.25 ME, 1024 MB memory installed,
Executing last command: boot cdrom1
Boot device: /pci@1f,0/pci@1,1/scsi@2/disk@6,0:f File and args:
Drive not ready
Evaluating: boot cdrom1
Can't open boot device
I verified the DVD and it works just fine. I install the OS with the same DVD on Netra-440 system without any issues.
Please tell me what am I missing here or doing wrong. Please help.

Sun-worshiper,
Thank you so much for pointing that out. I was loosing it.
Just in case someone else runs into this type of issue:
When you run probe-scsi-all please pay attention to the target. In order to boot from the DVD, I executed the following commands from the ok prompt:
ok nvalias dvd /pci@1f,0/pci@1,1/scsi@2/disk@4,0:f
ok boot dvd

Does SAP SRM support accelarated service procurement?

Dear Guru's ,
Can you comment on if SAP SRM supports accelerated service procurement ? My client follows the below business process time to time:
While requiring to perform emergency services (which are also not high valued service), they directly create service entry sheet entering the service performed and create invoice against it in their existing MM system. They donot go for purchase creation and approval process as the effort does not justify the value of the transaction.
Now, since they are going for SAP SRM system, they want to transfer the accelerated service procurement process to SRM system as well.
Does SAP SRM support this business process i.e. creation of service entry sheet or confirmation without any reference to Purchase Order? I donot have any system to check it from myside..
Your inputs will be highly appreciated.
Thanks and regards,
Ranjan

Hi
In Std SRM - GR is always is done with reference to Purchase Order
Therefore it is not possible to post GR or Services without any PO
Thanks
Trinath

Device supports sample clock input

I'm trying to find the best way to check if an NI device supports sample clock input. For example, I have a USB-6008 which does not support sample clock input. When I call DAQmxGetDevTerminals, I get "/Dev1/ai/StartTrigger, /Dev1/PFI0". For start trigger capability, I can call DAQmxGetDevAITrigUsage or look in the terminals string for "ai/StartTrigger". Should I search the string for "ai/SampleClock", or is there a function similar to DAQmxGetDevAITrigUsage?
Thank you,
CV

Hey CV,
From what I've seen, I don't know of a function similar to DAQmxGetDevAITrigUsage that works with the sample clock. It sounds like searching the terminal string may be your best bet for achieving the functionality you're looking for.

Does SAP BW support Window vista.

hi Friends,
Does SAP BW support Window vista.
I have got a laptop with Vista, I have installed SAP BW in external Harddisk. Can I connect with VMWare on window vista of my laptop.
Thanks in Advance.
Alykya

-> what do you mean "installed on external disk"?
sap needs to be installed locally...some parts, eg. databse files etc. can be spread over sveral disks...but on windows all information needs to be in the registry...
you could install vmware under vista, create a new virtual machine using for example windows 2003 server and install sap into that vm...
GreetZ, AH

Does SAP DMS support EML format

Does SAP DMS support EML format, and how can I make it work?
I know I may need to add a new workstation applications for EML in DC30, but I don't know the detailed settings for e.g: mime-types and viewer configuration, etc. Can anyone help?

Hi,
generally you can define a workstatiosn application for any file format. If the format has an extension with more than 3 characters please set the flag "You cannot rename...." in transaction DC30 to avoid problems.
Regarding the mime-type field I have to say that this is recommended by not really mandatory. Normally you should find the correct mime-type for the file format in the Internet.
In DC30 I would also recommend you to use the parameter %AUTO%%NO-LEAVE% at "Define workstation application in network". With this parameter the EML files will be opened in an external application.
In the field "file format" you just have to enter the value '*.eml'.
I hope that this information could be usful.
Regards,
Christoph

Does Netra T1 support external I2C inputs?

Similar Messages

Maybe you are looking for