Does Netweaver 7.0 support the AL32UTF8 character set?

We are running Netweaver 7.0 for a Vendavo solution running on Oracle 10.2.   We have created the Vendavo schema within the same database as Netweaver.  Vendavo documentation states the character set be AL32UTF8.  SAP sets the character set on Netweaver install to just UTF8.  Does anyone know if Netweaver 7.0 supports changing the DB character set to AL32UTF8?
Thanks.

Hi,
Yes you can as AL32UTF8 is a superset of UTF8 - this is supported. Please check the following note.
https://service.sap.com/sap/support/notes/456968
The above note also discusses how to change database character sets.
Also check the following FAQ SAP Note on Oracle Character Sets.
https://service.sap.com/sap/support/notes/606359
Moreover the SAP NW 7 installation sets the Oracle NLS to UTF8 which is find. Note NLS and Database character set is not the same,please check the following sap note for the same.
https://service.sap.com/sap/support/notes/669902
Hope this helps.
- Regards, Dibya

Similar Messages

  • Support for Russian Character Set

    What would you recommend as the NLS_LANG vaule for Oracle to support the Russian Character set. There are a few available like RU8BESTA. Which is recommended.

    Hi Ger,
    I need a little more information to make any suggestion. Is Russian the only language you intend to support? What is the client(s) OS that will be connecting and inserting data in the database?
    null

  • Which version of SRM Business Packages does Netweaver 7.0 support?

    We are planning on moving to SRM 7.0 Ehp2 and plan on using a portal interface with the Business Packages.  Will Netweaver 7.02 support the Busines Packages for SRM 7.0 Ehp2 or is Netweaver 7.1 or greater required.

    OK I used cut and paste
    Best regards,
    André
    SAP Connector for MS .NET (NCO) and VS 2005
    SAP Note Number: 943349 
    Symptom
    Reusing Microsoft Visual Studio 2003 components with the MS Visual Studio 2005 version
    Other terms
    SAP Connector for Microsoft .NET compatibility with Visual Studio 2005
    Reason and Prerequisites
    SAP Connector for Microsoft .NET installation
    Solution
    SAP provides support for SAP Connector for Microsoft .NET (NCO) version 1.x and 2.x, both running on Microsoft .NET Framework 1.1. Both versions run in Microsoft .Net Framework 2.0 as long as Microsoft .NET Framework 2.0 is backward compatible with Microsoft .NET version 1.1. SAP NCO version 1.x and 2.x will not install inside Visual Studio 2005. Instead customers are able to build components in Visual Studio 2003 and use these in Visual Studio 2005 projects.
    See the attached document for detailed instructions.
    Header Data
    Release Status Released for Customer
    Released on 25.05.2006
    Priority Recommendations/additional info
    Category Installation information
    Primary Component BC-OP-NET-NCO SAP .Net Connector
    Secondary Components BC-OP-NET-VS Visual Studio .Net Connector Wizard

  • Setting the Required Database AL32UTF8 Character Set

    Hi,
    How can I set the existing database character set to AL32UTF8 in order to use the database with Oracle Content DB.
    How can I use the Database Configuration Assistant (DBCA) to re-create the database with the correct AL32UTF8 character set.
    Regards
    Boris

    Of course you can change the characterset value, but you need to follow some good explanation as the metalink notes below :
    Note:260192.1 - Changing WE8ISO8859P1/ WE8ISO8859P15 or WE8MSWIN1252 to (AL32)UTF8 with ALTER DATABASE CHARACTERSET
    Note:227332.1 - NLS considerations in Import/Export - Frequently Asked Questions -
    Nicolas.

  • Does DS 5.2 support the PKIX schema defined in RFC2587?

    hi,
    please, can anybody answer me this:
    1. does DS 5.2 support the schema defined in RFC2587
    (http://www.ietf.org/rfc/rfc2587.txt)?
    ...a minimal schema to support PKIX in an LDAPv2 environment...
    2. if so, please can you explain how i go about configuring DS 5.2 for RFC
    2587? or point me to the documentation?
    3. if it doesn't support RFC 2587 out of the box, what schema(s) does DS
    5.2 support by default?
    thanks in advance for your help.

    i think i have worked out what i need to do to make DS 5.2 rfc2587-compliant (i have also worked out - by rtfm - that it doesn't by default ;�).
    dn: cn=schema
    changetype: modify
    add: objectClasses
    objectClasses: ( 2.5.6.21 NAME 'pkiuser' DESC 'auxiliary class for non-CA certificate owners'
      SUP top AUXILIARY MAY userCertificate ) 
    dn: cn=schema
    changetype: modify
    add: objectClasses
    objectClasses: ( 2.5.6.22 NAME 'pkiCA' DESC 'class for Cartification Authorities' SUP top
      AUXILIARY MAY ( authorityRevocationList $ caCertificate $ certificateRevocationList $
      crossCertificatePair ) )
    dn:cn=schema
    changetype: modify
    replace: attributetypes
    attributetypes: ( 2.5.4.39 NAME ( 'certificateRevocationList'
      'certificateRevocationList;binary' ) DESC '  ' SYNTAX 1.3.6.1.4.1.1466.115.121.1.5
      SINGLE-VALUE ) any other suggestions still welcome. thanks in advance.

  • Does Photoshop Lightroom 4 support the Olympus OM-D

    Does Photoshop Lightroom 4 support the Olympus OM-D? Does not seem to out of the box but would like to know if there is a plug in or update available or coming soon.

    LR4.1 (coming soon, currently RC2)
    Download LR4.1 RC2 now from
    http://labs.adobe.com/technologies/lightroom4-1/?tabID=details#tabTop
    New Camera Support
    Canon EOS 5D Mark III — introduced with release candidate 1 (March 29, 2012) 
    Canon EOS 60Da 
    Fuji FinePix F770EXR 
    Fuji FinePix F775EXR 
    Nikon D3200 
    Olympus OM-D EM-5 
    Panasonic Lumix DMC-GF5 
    Pentax K-01 
    RICOH LENS A16 24-85mm F3.5-5.5 
    Samsung NX20 
    Samsung NX210 
    Samsung NX1000 
    Sony Alpha NEX-VG20 
    Sony SLT-A57

  • OATS CPU does not support the SSE2 instruction set required to run JRockit

    Hello,
    I am trying to get the OATS agents to work on some injector machines, however, when I try to start them I get the following error:
    "[ERROR] Your CPU does not support the SSE2 instruction set required to run JRockit.
    Could not create the Java Virtual Machine."
    Is there a way to configure OATs to use the Sun JDK instead? I have the Sun JDK in my path and JAVA_HOME set accordingly, however that doesn't seem to make a difference. Alternatively, is there a workaround to this problem?
    Thanks,
    Michael.

    Hi Tab,
    In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
    http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
    One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
    If you have any feedback on our support, please click
    here.
    Regards,
    Elvis Long
    TechNet Community Support

  • Why the SAX parser cannot support the special character like "¡"

    I do not understand why the SAX parser cannot support the special character like &iexcl; but it can replace the &quot; &amp; &lt; &gt;   to ", &, <, >, ,, but other characters will be replaced to empty charater.
    can somebody give me any suggestions or solutions. THX.
    Edited by: 844086 on 2011-3-14 上午2:27
    Edited by: 844086 on 2011-3-14 上午2:27

    I quote:
    Alternatively implement an EntityResolver that resolves the desired escapes.You are again an example that people only read/register the first thing written in a post.

  • Does Acrobat XI Pro support the feature of syncing settings in Creative Cloud?

    Does Acrobat XI Pro support the feature of syncing settings in Creative Cloud? I downloaded this software from my Creative Cloud account but I do not find the sync settings option in it. Is this feature not available?

    No it doesn't.
    Acrobat isn't part of the Creative Cloud product range, it is included in the CC subscription packages but it doesn't include features of the "... CC" products such as Sync or Typekit.

  • 010SM: ...does not support the initial proposed set of capabilities...

              While I was testing a data extraction servlet that takes a sql statement from an HTML form document, I got the following errors in the jdbc log. I don't understand what the jdbc log entry is telling me.
              Here's my configuration:
              jdbc 20 connection with jConnect 5.2 driver
              Weblogic Server 5.1
              Perhaps you can help me.
              regards,
              Jackle
              SQLWarning: reason(010SM: This database does not support the initial proposed set of capabilities, retrying.) SQLState(010SM)
              SQLWarning: reason(010SM: This database does not support the initial proposed set of capabilities, retrying.) SQLstate(010SM) vendor code(0)
              java.sql.SQLException: JZ006: Caught IOException: java.io.IOException: JZ0EM: End of data.
              at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:426)
              at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2794)
              at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java, Compiled Code)
              at com.sybase.jdbc2.tds.Tds.logout(Tds.java, Compiled Code)
              at com.sybase.jdbc2.tds.Tds.login(Tds.java:359)
              at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java, Compiled Code)
              at com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:190)
              at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:169)
              at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:122)
              at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:175)
              at weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(ConnectionEnvFactory.java:149)
              at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:109)
              at weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.java, Compiled Code)
              at weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java, Compiled Code)
              at weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:330)
              at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java, Compiled Code)
              at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
              at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
              at java.lang.reflect.Method.invoke(Native Method)
              at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
              at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled Code)
              at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
              SQLException: SQLState(JZ006)
              registerDriver: driver[className=weblogic.jdbc20.jts.Driver,weblogic.jdbc20.jts.Driver@78bf9ff2]
              registerDriver: driver[className=weblogic.jdbc20.pool.Driver,weblogic.jdbc20.pool.Driver@64b39ff2]
              

    Reduce the complexity of the SQL statement until you do not receive the
              error. Add back the functionality until it breaks. At that point, you can
              see what feature that the driver/database does not support.
              Peace,
              Cameron Purdy
              Tangosol, Inc.
              http://www.tangosol.com
              +1.617.623.5782
              WebLogic Consulting Available
              "Jackle" <[email protected]> wrote in message
              news:[email protected]...
              >
              >
              > While I was testing a data extraction servlet that takes a sql statement
              from an HTML form document, I got the following errors in the jdbc log. I
              don't understand what the jdbc log entry is telling me.
              >
              > Here's my configuration:
              >
              > jdbc 20 connection with jConnect 5.2 driver
              > Weblogic Server 5.1
              >
              >
              > Perhaps you can help me.
              >
              > regards,
              >
              > Jackle
              >
              >
              > SQLWarning: reason(010SM: This database does not support the initial
              proposed set of capabilities, retrying.) SQLState(010SM)
              > SQLWarning: reason(010SM: This database does not support the initial
              proposed set of capabilities, retrying.) SQLstate(010SM) vendor code(0)
              > java.sql.SQLException: JZ006: Caught IOException: java.io.IOException:
              JZ0EM: End of data.
              > at com.sybase.jdbc2.jdbc.ErrorMessage.raiseError(ErrorMessage.java:426)
              > at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:2794)
              > at com.sybase.jdbc2.tds.Tds.nextResult(Tds.java, Compiled Code)
              > at com.sybase.jdbc2.tds.Tds.logout(Tds.java, Compiled Code)
              > at com.sybase.jdbc2.tds.Tds.login(Tds.java:359)
              > at com.sybase.jdbc2.jdbc.SybConnection.tryLogin(SybConnection.java,
              Compiled Code)
              > at
              com.sybase.jdbc2.jdbc.SybConnection.regularConnect(SybConnection.java:190)
              > at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:169)
              > at com.sybase.jdbc2.jdbc.SybConnection.<init>(SybConnection.java:122)
              > at com.sybase.jdbc2.jdbc.SybDriver.connect(SybDriver.java:175)
              > at
              weblogic.jdbc.common.internal.ConnectionEnvFactory.makeConnection(Connection
              EnvFactory.java:149)
              > at
              weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(Connection
              EnvFactory.java:109)
              > at
              weblogic.common.internal.ResourceAllocator.makeResources(ResourceAllocator.j
              ava, Compiled Code)
              > at
              weblogic.common.internal.ResourceAllocator.<init>(ResourceAllocator.java,
              Compiled Code)
              > at
              weblogic.jdbc.common.internal.ConnectionPool.startup(ConnectionPool.java:330
              > at weblogic.jdbc.common.internal.JdbcInfo.initPools(JdbcInfo.java,
              Compiled Code)
              > at weblogic.jdbc.common.internal.JdbcInfo.startup(JdbcInfo.java:200)
              > at weblogic.jdbc.common.internal.JdbcStartup.main(JdbcStartup.java:11)
              > at java.lang.reflect.Method.invoke(Native Method)
              > at weblogic.t3.srvr.StartupThread.runMain(StartupThread.java:219)
              > at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java, Compiled
              Code)
              > at
              weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
              > SQLException: SQLState(JZ006)
              > registerDriver:
              driver[className=weblogic.jdbc20.jts.Driver,weblogic.jdbc20.jts.Driver@78bf9
              ff2]
              > registerDriver:
              driver[className=weblogic.jdbc20.pool.Driver,weblogic.jdbc20.pool.Driver@64b
              39ff2]
              >
              >
              

  • Does LabVIEW 8.6 support the NXT toolkit?

    Does LabVIEW 8.6 support the NXT toolkit?, the NXT toolkit 1.0.1 patch does not give instructions on how to load it with LabVIEW 8.6.   Does anyone know how to load the patch with LabVIEW 8.6?
    LEGOAustin

    Hi LEGOAUSTIN,
    Check out the forum dedicated to Lego: http://forums.ni.com/ni/board?board.id=beta18. It is largely community driven but sometimes NI employees post.
    I would also talk to Lego about NXT support. Check out his KB on the issue: http://digital.ni.com/public.nsf/allkb/59F9356834A0E85086257244007A3354?OpenDocument.
    What I can give you in the meantime is to ensure you've done the right order:
    Install the LEGO MINDSTORMS NXT Toolkit v1.0
    Restart the computer
    Install the LEGO patch 1.0.1
    As for explicit support in LabVIEW 8.6, it doesn't appear to be any right now and I cannot comment on the future.
    A quick Google Search came up with this as a possible work around: http://forums.nxtasy.org/index.php?showtopic=3277
    Message Edited by JeffL on 02-11-2009 10:34 AM
    Jeff | LabVIEW Software Engineer

  • Server uses AL32UTF8 character set

    Hello All,
    OS: Linux (SLES 8)
    Recently I have applied 10g Relase 1 (10.1.0.5) patch set for AIX 64 -- Patch #
    4505133.
    My earler version of database was 10.1.0.3.0.
    I got message patch successfully installed.
    I can login to the database.
    One of our weekly routine is to run our internal shell script interface
    programs.
    Very first step of this program is to created .dmp (exp) file. We are doing this
    from years.
    Now after applying this patch set,
    I am getting error in this program as below:
    Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.5.0 -
    Production
    With the Partitioning, OLAP and Data Mining options
    Export done in US7ASCII character set and AL16UTF16 NCHAR character set
    server uses AL32UTF8 character set (possible charset conversion)
    About to export specified users ...
    . exporting pre-schema procedural objects and actions
    . exporting foreign function library names for user abc
    . exporting PUBLIC type synonyms
    . exporting private type synonyms
    . exporting object type definitions for user abc
    About to export abc's objects ...
    . exporting database links
    . exporting sequence numbers
    . exporting cluster definitions
    EXP-00056: ORACLE error 932 encountered
    ORA-00932: inconsistent datatypes: expected BLOB, CLOB got CHAR
    EXP-00000: Export terminated unsuccessfully
    DN

    Pierre,
    I do not have any invalid objects.
    But I run
    SQL> @?/rdbms/admin/catmetx.sql (Per Metalink note 339938.1).
    But now I am getting errorsbelow:
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_COM_USER_PRIVILEGES 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_COLLECTION_DEFINITION 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_COLLECTION_DEF_REPOS 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_COLLECTION_REPOSITORY 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_ERRORS 0 rows exported
    . . exporting table QUEST_SL_EXPLAIN 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_EXPLAIN_PICK 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_QUERY_DEFINITIONS 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identifier
    . . exporting table QUEST_SL_QUERY_DEF_REPOSITORY 0 rows exported
    EXP-00056: ORACLE error 904 encountered
    ORA-00904: "SYS"."DBMS_EXPORT_EXTENSION"."FUNC_INDEX_DEFAULT": invalid identif
    Now I am running @catproc.sql.
    After that I will run utlrp.sql script if there is any invalid objects..
    DN

  • What Determines the "File Character Set" on Export?

    When we Export a Page, for example, from APEX, the File Character Set is defaulted to some value (and not editable). On some of our instances, this defaults to "Western European Windows 1252" while on others it is "Unicode UTF-8." Specifically, what setting is being used to make this determination? This is kind of a pain because we have some environments wherein we are promoting changes from environment to environment and these settings differ. If, during import, the user neglects to set this to the same File Character Set in which the file was originally exported, we get issues (non-printable control characters and the like). Therefore, we'd love to make all of the environments match but, aren't sure how to do this.
    Thanks,
    -Joe
    Edited by: Joe Upshaw on Apr 10, 2013 3:25 PM

    Hello Joe,
    In your environment, the character set of the APEX exported files is set according to the DAD character set, and with your APEX version, it must be set to AL32UTF8 (regardless of the database character set).
    Re: Export - File Character Set list is read only (fixe UTF-8 value)
    You should check the DAD character set setting in the environments in which APEX is not exporting the files using UTF8.
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Author of Oracle Application Express 3.2 – The Essentials and More

  • B2B Validation contains characters not listed in the allowed character set

    Hi,
    Working on EDIFACT AS2 INVOIC D05A. B2B 10g with Document Editor Version: 6.6.0.2801
    payload:
    UNA:+.?*'
    UNB+UNOB:4::1+A1103206+XXTPHOME+20110413:0456+30000000000545'
    UNH+30000000000545+INVOIC:D:05A:UN'
    BGM+389+5100256812'
    DTM+137:20110413:102'
    DTM+143:201104:610'
    FTX+CUR+++Consignment stock accounting'
    RFF+AOG:0'
    NAD+BY+A1103206::234++XXXXXXXXX++81379+DE'
    RFF+VA:DE260978148'
    CTA+PD+GC SSC ARP:Yyyy Xxxx'
    COM+49(2871) 91 3481:TE'
    [email protected]:EM'
    NAD+SU+A1082156::234++XXXXX:::[email protected]+Nnnnn 7+Llll+DE-BY+90443+DE'
    RFF+VA:DE256058056'
    NAD+UC+0000000100::92++Gggg Gggg:Hhhh+Kkkkk 2+Bocholt++46395+DE'
    TAX+7+VAT:::19% VAT+DE:133:86++:::19.00'
    CUX+2:EUR:4'
    LIN+000001++UAA3595HN/C3:VP'
    PIA+1+A5B00075796235:BP'
    IMD+B++:::IC DECTUAA3595HN/C3 PA V20810C6323D:670'
    QTY+47:6000.000:PCE'
    MOA+203:660.00'
    CUX'
    I try to validate payload and get 2 errors:
    1. Segment COM type an min length 1 max length 512 payload value: [email protected]
    Error: ub-Element COM010-010 (Communication address identifier) contains characters not listed in the allowed character set. Segment COM is defined in the guideline at position 0350.
    2. Segment group 27 Sub Element CUX payload value is null, value is exists at header level (Group 7 ub-Element CUX)
    Error: Unrecognized data was found in the data file as part of Loop Group 27. The last known Segment was MOA at guideline position 1260 - Validator error - Extra data was encountered.
    Thanks for any help
    Adi

    We fix it by change Character set to UNOC

  • Setting the database character set problem!

    I'm sorry if this is beaten to death, I've read the FAQ and many questions in this forum and I didn't find it.
    I want to change the database character set from the beginning. Where do I place the NLS_CHARACTERSET=EL8ISO8859P7 ?
    I know I can alter the existing database character but EL8ISO8859P7 is not a superset of WE8ISO8859P1 and I don't want to go to Unicode yet...
    Do I have to create a brand new database or can I just alter a script and restart it ?
    I didn't find any nls_setting in the database creations, uh, wizard.
    Please be as specific as possible because as you can understand I'm not what you can call a db expert...
    Thank you.

    which version of Oracle? these things change between versions.
    v7 - update sys.props$ (unsupported!)
    v8.0 - rebuild database
    v8.1 - alter database change characterset
    remember, backup and test before you do this on a used/production database!
    good luck, Nogah.

Maybe you are looking for

  • Creation Of Production Order without PP module

    Hi PP guru's There is one Specific requirment from Client side, the Requirement is They are not supposed to implement the PP module in R/3 but they want to get generate the Production Order in R/3 through some interface with lagacy system, based on t

  • How do i sync my music when there is more songs one my phone than on my mac?

    I had some issues with two different apple ID's when i migrated from a macbook to an imac.  it seems we are offered appleID's ad nauseum when we buy new apply products.  Anywho.....  I believe i have most of it straightened out, however.  The iTunes

  • Aperture won't open either from the Dashboard or from the Finder.

    When I try to open Aperture from Dashboard or Finder, I get the message "The application Aperture can't be opened." -1712. I have not upgraded yet to Mavericks (after 10 hours of updating, an error occurred!) and haven't changed anything since the la

  • Formula saving

    Hi.. I had defined a formula with IF ciondition in transformation. Iam not finding save option in the screen..can some one help me?? Cheers Ravi

  • Macbook Pro 13' Problem

    Hi, I'm from Hong Kong. I'm using Macbook Pro 13' and Bootcamp. Recently, while I'm using bootcamp(windows 7), the system crashed, and I restarted the computer, but it just stopped at the startup screen(mac os & windows) , kept loading and loading...