Does new Airport Extreme slow down when used with Airport Express?
Maybe this is self-evident.
If get the new Airport extreme and use an old airport express to extend it, will signal slow down to the old speed?
Does the AE have a greater range? Perhaps I don't need the Express to extend.
I live in NYC and there are so many signals in the air. It seems like having the additional airport helps keep me connected.
Thanks.
The airport express is g technology not n technology, so it will be at least as slow as your old network. Also, I'm not sure but I think the the range will be a bit longer than with the old g system, but does not have the full potential of an n system.
I've set up my new system but none of my machines are n capable. I extended the system using my old expresses. The speed of the system is no greater than what it was before the n.
I bought the system to upgrade my technology because everytime my Applecare runs out, I get a new computer which isn't too far down the road. I've purchased an Apple TV which will also work better with the n technology when I upgrade. It's either buy it now or buy it later. I'm also hoping that some third party like Belkin will develop a PCIX card to provide n technology to those of my computers that aren't currently n capable. I'm sure there is many like me out there.
Similar Messages
-
Extreme slow down when using wireless connection
I did not have a wireless network prior to purchasing the airport express and needed this as I purchased a macbook. My intention was only to use this device as a wireless network. I have my cable modem connected to a linksys router which is connected to the airport express. The internet connection on my macbook is extremely SLOW! I have reset and reinstalled my airport several times, called apple support and trouble shoot for over an hour, however still experiencing the same problems...slow internet connection. In my troubleshooting I have determined that cable modem and connection, router and airport are all working properly. So the only other thing is interference issue. I've tried changing the channels, use interference robustness option however still no results. I just want my laptop internet connection to work fast. This is my last hope otherwise I'm going out tomorrow to buy a wireless Linsys N router. Any suggestions????
Well it turned out to be a DNS configuration problem on the MacBook. If you go to Networks-Advanced in the System Preferences for the Airport connection, then select the DNS TAB. In there I had a spurious DNS entry. I deleted the one that was manually entered in (it's in black text) that way the one I received from the Airport Express was the only one in there (it is greyed out and you can't delete it.)
Hope that helps. -
Safari browser seems to slow down when working with my wifi ASUS AC 68U router
safari browser seems to slow down when working with my wifi ASUS AC 68U router - any ideas on why?
Is your problem with Safari on the iPad, or some MacBook Air?
Are you sure that the ASUS firmware is tested with the device having trouble and its operating system?
Note: MacBook Airs do not run iOS. They run Mac OS X, Windows or Linux. -
Slow down when using SHARE function?
Whenever I use the share feature to wirelessly transfer files from my Mac Air to my Macpro everything on my macpro slows down. the mouse moves slow- windows take forever to respond- or just will not close at all. I tried switching my wireless mouse to a wire and same issue. Shouldn't the transfer be a background task? Why is it effecting the overall performance of the machine?
Your explanation makes sense; I had not considered the output size because I thought that the application would make all the necessary adjustments to the size I chose.
I was not able to find the square pixel reference (below is the advanced area) but I did resolve the issue. At first I changed the output to be 400 x 300, and while the bars still existed, they were greatly reduced. So I took a screen capture and in Photoshop measured the height of the remaining top bar at 3 pixels. So, I reduced my height in PrE7 by a total of 6 pixels to 294 and that completely corrected the issue. Thanks for your help on this. -
After updating to latest version for Osx, I noticed that when right clicking for context menus, enormous lag occurs. It has made it almost impossible to be productive. Any ideas?
Thanks for your response and sorry for the delay in my rep[ly.
Today I tested the Linux-64 version (Firefox 33) from the link you suggested. There weren't any install instructions or a README, but based on the file-system layout I guess it just needs to be extracted. I downloaded and extracted to my Downloads directory and ran the executable via command-line as my user (not root).
Firefox popped up right away, but it was not usable for at least 30s. It asked to import from Chrome which I did (no errors). Every click on the top bar (address bar search, buttons to the right of search, bookmarks toolbar) resulted in a dimming un-dimming sequence of @7s, after which nothing (couldn't focus in the address bar, occasionally the bookmark menu would appear, but was not functional). Basically, it's un-usable.
As I mentioned in an earlier reply, I am having similar problems with Komodo which is apparently also Mozilla based.
Are there any logs I could tail and post that might help track this down?
Not sure what to do at this point. -
New iMac extremely slow following migration (Help with Etre Check diagnosis)
Hi gurus,
New iMac - scheduled for genius bar on Friday but trying to avoid the trip. Migrated everything over from 2009 macbook pro to 2011 macbook and now 2013 iMac. I imagine there is a lot of cruft from the repeated migrations and am close to just wiping and migrating from scratch. I don't know, however, how to get my old mail and other critical settings over.
Problem is clearly in the user account. I created a separate admin account and that runs relatively fine. Is the below user account salvageable? Should I delete all my old permissions? Any tips would be appreciated. Thanks for the Etrecheck program,
Problem description:
Application hangs and system unresponsive in migrated user account
EtreCheck version: 2.1.8 (121)
Report generated February 16, 2015 at 4:48:06 PM PST
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Technical Specifications)
iMac - model: iMac14,1
1 2.7 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
Intel Iris Pro
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.2 (14C109) - Time since boot: 4:51:57
Disk Information: ℹ️
APPLE HDD HTS541010A9E662 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 999.35 GB (585.74 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
TOSHIBA External USB 3.0 2 TB
EFI (disk3s1) <not mounted> : 210 MB
Time Capsule (disk3s2) <not mounted> : 2.00 TB
Western Digital My Book 1130 2 TB
EFI (disk1s1) <not mounted> : 210 MB
ACbook (disk1s2) <not mounted> : 2.00 TB
Centon DataStick 30.93 GB
EFI (disk2s1) <not mounted> : 210 MB
Install OS X Yosemite (disk2s2) /Volumes/Install OS X Yosemite : 30.59 GB (25.27 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.Cycling74.driver.Soundflower (1.4.2) [Click for support]
[not loaded] com.eltima.ElmediaPlayer.kext (1.58 - SDK 10.4) [Click for support]
[not loaded] com.logmein.hamachi (1.0) [Click for support]
[not loaded] com.seagate.driver.PowSecDriverCore (5.1.1) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.7) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.7) [Click for support]
[loaded] net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) [Click for support]
/System/Library/Extensions/Seagate Storage Driver.kext/Contents/PlugIns
[not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.1.1) [Click for support]
[not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.1.1) [Click for support]
[not loaded] com.seagate.driver.SeagateDriveIcons (5.1.1) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.accountsd.plist
[killed] com.apple.AirPlayUIAgent.plist
[killed] com.apple.bird.plist
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cloudd.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.coreservices.uiagent.plist
[killed] com.apple.iconservices.iconservicesagent.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.pluginkit.pkd.plist
[killed] com.apple.recentsd.plist
[killed] com.apple.SafariNotificationAgent.plist
[killed] com.apple.sbd.plist
[killed] com.apple.scopedbookmarkagent.xpc.plist
[killed] com.apple.secd.plist
[killed] com.apple.secinitd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.spindump_agent.plist
[killed] com.apple.tccd.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
23 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.AssetCacheLocatorService.plist
[killed] com.apple.awdd.plist
[killed] com.apple.coresymbolicationd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.diagnosticd.plist
[killed] com.apple.GSSCred.plist
[killed] com.apple.iconservices.iconservicesagent.plist
[killed] com.apple.iconservices.iconservicesd.plist
[killed] com.apple.ifdreader.plist
[killed] com.apple.MobileFileIntegrity.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.nsurlsessiond.plist
[killed] com.apple.periodic-daily.plist
[killed] com.apple.sandboxd.plist
[killed] com.apple.secinitd.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.spindump.plist
[killed] com.apple.sysmond.plist
[killed] com.apple.systemstatsd.plist
[killed] com.apple.tccd.system.plist
[killed] com.apple.wdhelper.plist
[killed] org.cups.cupsd.plist
22 processes killed due to memory pressure
Launch Agents: ℹ️
[loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] com.maintain.LogOut.plist [Click for support]
[not loaded] com.maintain.Restart.plist [Click for support]
[not loaded] com.maintain.ShutDown.plist [Click for support]
[not loaded] com.maintain.Sleep.plist [Click for support]
[running] com.maintain.SystemEvents.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
[running] com.seagate.SeagateStorageGauge.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[running] com.bombich.ccchelper.plist [Click for support]
[running] com.crashplan.engine.plist [Click for support]
[running] com.eltima.ElmediaPlayer.daemon.plist [Click for support]
[failed] com.google.GoogleML.plist [Click for support]
[loaded] com.google.keystone.daemon.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.rogueamoeba.hermes.plist [Click for support]
[failed] com.vmware.launchd.vmware.plist [Click for support]
[running] com.zqueue.servetome-server.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] net.sourceforge.MonolingualHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[running] .dat0598.40e (hidden) [Click for support]
/usr/bin/osascript /usr/bin/osascript osascript -e tell application "Folder Actions Dispatcher" to tick
[unknown] .datdf56.40b (hidden) [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[failed] com.amazon.cloud-player.plist [Click for support]
[running] com.amazon.music.plist [Click for support]
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist [Click for support]
[running] com.mlbam.nexdef.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Canon IJ Network Scanner Selector2 UNKNOWN (missing value)
Dropbox Application (/Applications/Dropbox.app)
ACbook UNKNOWN (missing value)
CrashPlan menu bar UNKNOWN (missing value)
CrashPlan menu bar Application (/Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app)
Canon IJ Network Scanner Selector EX Application (/Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app)
Caffeine UNKNOWN (missing value)
Internet Plug-ins: ℹ️
EPPEX Plugin: Version: 10.0 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
SlingPlayer: Version: Unknown - SDK 10.8 [Click for support]
AdobePDFViewer: Version: 9.5.5 [Click for support]
Leap Web Player: Version: LeapPlayer version 2.0.2f2 [Click for support]
Unity Web Player: Version: UnityPlayer version 3.5.5f4 - SDK 10.6 [Click for support]
nppanda3d: Version: Unknown [Click for support]
googletalkbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
iPhotoPhotocast: Version: 7.0 - SDK 10.8
RealPlayer Plugin: Version: Unknown [Click for support]
QuickTime Plugin: Version: 7.7.3
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
DivXBrowserPlugin: Version: 1.4 [Click for support]
Silverlight: Version: 4.0.60129.0 [Click for support]
CoolirisWebKitPlugin: Version: Unknown [Click for support]
Google Earth Web Plug-in: Version: 6.0 [Click for support]
Default Browser: Version: 600 - SDK 10.10
Easy-WebPrint EX: Version: 1.0.0 [Click for support]
o1dbrowserplugin: Version: 5.40.2.0 - SDK 10.8 [Click for support]
Flip4Mac WMV Plugin: Version: 2.3.8.1 [Click for support]
SharePointBrowserPlugin: Version: 14.4.3 - SDK 10.6 [Click for support]
ContentUploaderPlugin: Version: 1.2 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Picasa: Version: 1.0 [Click for support]
3rd Party Preference Panes: ℹ️
RCDefaultApp
Flash Player [Click for support]
Flip4Mac WMV [Click for support]
Java [Click for support]
Perian [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 999.35 GB Disk used: 413.60 GB
Destinations:
Untitled [Local]
Total size: 0 B
Total number of backups: 0
Oldest backup: -
Last backup: -
Size of backup disk: Too small
Backup size 0 B < (Disk used 413.60 GB X 3)
Top Processes by CPU: ℹ️
11% BitdefenderVirusScanner
7% WindowServer
1% loginwindow
0% SystemUIServer
0% dpd
Top Processes by Memory: ℹ️
94 MB BitdefenderVirusScanner
60 MB Finder
34 MB mds_stores
26 MB CrashPlanService
26 MB WindowServer
Virtual Memory Information: ℹ️
34 MB Free RAM
1.24 GB Active RAM
1.23 GB Inactive RAM
1.81 GB Wired RAM
37.21 GB Page-ins
1.05 GB Page-outs
Diagnostics Information: ℹ️
Feb 16, 2015, 04:30:47 PM /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-163047_[redacted].crash
Feb 16, 2015, 02:41:32 PM /Library/Logs/DiagnosticReports/firefox_2015-02-16-144132_[redacted].hang
Feb 16, 2015, 02:40:05 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-16-144005_[reda cted].crash
Feb 16, 2015, 01:21:20 PM /Users/[redacted]/Library/Logs/DiagnosticReports/BitdefenderVirusScanner_2015-0 2-16-132120_[redacted].crash
Feb 16, 2015, 11:56:57 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-115657_[redacted].cpu_resource.diag [Click for details]
Feb 16, 2015, 11:50:54 AM /Library/Logs/DiagnosticReports/com.zqueue.servetome-server_2015-02-16-115054_[ redacted].crash
Feb 16, 2015, 11:49:07 AM Self test - passed
Feb 16, 2015, 09:55:04 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-095504_[redacted].cpu_resource.diag [Click for details]
Feb 16, 2015, 09:44:52 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-16-094452_[redacted].cpu_resource.diag [Click for details]
Feb 15, 2015, 03:02:01 PM /Library/Logs/DiagnosticReports/ClamXav_2015-02-15-150201_[redacted].hang
Feb 15, 2015, 02:58:45 PM /Users/[redacted]/Library/Logs/DiagnosticReports/garcon_2015-02-15-145845_[reda cted].crash
Feb 15, 2015, 12:35:39 AM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-15-003539_[redacted].cpu_resource.diag [Click for details]
Feb 15, 2015, 12:19:21 AM /Library/Logs/DiagnosticReports/CrashPlanService_2015-02-15-001921_[redacted].c pu_resource.diag [Click for details]
Feb 14, 2015, 11:45:36 PM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-234536_[redacted].cpu_resource.diag [Click for details]
Feb 14, 2015, 07:00:58 PM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-190058_[redacted].cpu_resource.diag [Click for details]
Feb 14, 2015, 03:54:47 PM /Users/[redacted]/Library/Logs/DiagnosticReports/ClamXav_2015-02-14-155447_[red acted].crash
Feb 14, 2015, 03:18:24 PM /Library/Logs/DiagnosticReports/Folder Actions Dispatcher_2015-02-14-151824_[redacted].cpu_resource.diag [Click for details]Everything is included below. Shortly before I ran the script I disabled folder actions which appeared to have a bunch of redundant and scripts that were taking close to 6-7 gigs of ram, It'll be interesting to review the below. Thanks Mr. Davis, you are a major resource,
Start time: 09:12:51 02/17/15
Revision: 1241
Model Identifier: iMac14,1
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 7:55
UID: 501
USB
My Book 1130 (Western Digital Technologies, Inc.)
External USB 3.0 (Toshiba America Info. Systems, Inc.)
DataStick (Alcor Micro, Corp.)
Bluetooth
Apple Magic Mouse
Apple Wireless Keyboard
Activity
CPU: user 18%, system 19%
CPU usage (%)
mds (UID 0): 19.5
I/O wait time (ms/s)
mds (UID 0): 1156
mdworker (UID 89): 186
I/O requests (KiB/s)
mds (UID 0): 4892
System errors (per sec)
mdworker (UID 89, error 2): 158
mds (UID 0, error 2): 149
mds (UID 0, error 20): 116
Trusted certs (user)
63.197.157.203
Firewall: On
Listeners
kdc: kerberos
launchd: afpovertcp
launchd: microsoft-ds
launchd: printer
launchd: ssh
System caches/logs
1166 MB: /Library/Caches/CrashPlan/42/cpfmf
Diagnostic reports
2015-02-14 ClamXav crash
2015-02-15 ClamXav hang
2015-02-15 garcon crash
2015-02-16 BitdefenderVirusScanner crash x2
2015-02-16 Kernel gpuRestart
2015-02-16 com.zqueue.servetome-server crash
2015-02-16 firefox hang
2015-02-16 garcon crash
I/O errors
disk3s2: data underrun 1
disk1s2: do_jnl_io: strategy err 0x6 2
Volumes
disk0s2: /
disk1s2: /Volumes/Install
disk3s2: /Volumes/ACbook
disk2s2: /Volumes/Time
Kernel log
Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on Console(2347)
Feb 15 09:48:38 warning: loginwindow(73) performed out-of-band resume on iTunes(2727)
Feb 15 09:48:43 IOAudioStream[0xffffff802f3abc00]::clipIfNecessary() - Error: counted 1 clip more than one buffer ahead errors.
Feb 15 14:53:10 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
Feb 15 14:56:36 warning: loginwindow(73) performed out-of-band resume on ClamXav(2059)
Feb 16 09:39:13 utun_start: ifnet_disable_output returned error 12
Feb 16 10:07:25 Trying restart GPU ...
Feb 16 11:43:50 jnl: disk1s2: write_journal_header: error writing the journal header!
Feb 16 11:43:51 jnl: disk1s2: close: journal 0xffffff802b4daa80, is invalid. aborting outstanding transactions
Feb 16 11:51:14 utun_start: ifnet_disable_output returned error 12
Feb 16 11:57:11 jnl: disk1s2: write_journal_header: error writing the journal header!
Feb 16 11:57:11 jnl: disk1s2: close: journal 0xffffff8025c1cc20, is invalid. aborting outstanding transactions
Feb 16 14:22:43 Limiting closed port RST response from 423 to 250 packets per second
Feb 16 14:24:06 Limiting closed port RST response from 264 to 250 packets per second
Feb 16 14:24:28 Limiting closed port RST response from 324 to 250 packets per second
Feb 16 14:24:42 Limiting closed port RST response from 251 to 250 packets per second
Feb 17 01:18:41 Sleep failure code 0x00000088 0x14006700
Feb 17 01:18:41 System was rebooted due to Sleep/Wake failure
Feb 17 01:18:41 Failed to open swap file 30
Feb 17 01:18:41 vm_swap_create_file failed @ 19 secs
Feb 17 01:18:41 USBF: 20.861 AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002ed while doing getting port status (4)
Feb 17 01:18:41 USBF: 20.861 AppleUSBHubPort::FatalError - Port 1 of Hub at 0x14800000 reported error 0xe00002c0 while doing clearing port feature (2)
Feb 17 01:19:29 utun_start: ifnet_disable_output returned error 12
Feb 17 08:10:16 [IOBluetoothHCIController][handleACLPacketTimeout] -- Disconnecting due to device not responding (ACL Packet timed out) for connection handle 0x40
System log
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:08:56 Finder assertion failed: 14C109: libxpc.dylib + 40320 [UUID]: 0x13
Feb 17 09:09:31 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Feb 17 09:09:31 WindowServer WSGetSurfaceInWindow : Invalid surface 687364876 for window 227
Feb 17 09:09:37 WindowServer disable_update_timeout: UI updates were forcibly disabled by application "Safari" for over 1.00 seconds. Server has re-enabled them.
Feb 17 09:09:38 WindowServer WSGetSurfaceInWindow : Invalid surface 1046946449 for window 227
Console log
Feb 17 07:47:09 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:09 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:53 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:47:53 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 17 07:54:18 ReportCrash Invoking spindump for pid=9255 wakeups_rate=757 duration=60 because of excessive wakeups
Feb 17 07:54:59 ReportCrash Invoking spindump for pid=9269 wakeups_rate=1144 duration=40 because of excessive wakeups
Feb 17 08:09:53 ReportCrash Invoking spindump for pid=417 wakeups_rate=252 duration=179 because of excessive wakeups
Feb 17 08:15:34 ReportCrash Invoking spindump for pid=9290 wakeups_rate=203 duration=222 because of excessive wakeups
Feb 17 08:18:12 ReportCrash Invoking spindump for pid=6328 wakeups_rate=185 duration=244 because of excessive wakeups
Feb 17 08:28:18 ReportCrash Invoking spindump for pid=9314 wakeups_rate=3955 duration=12 because of excessive wakeups
Feb 17 08:32:28 ReportCrash Invoking spindump for pid=9321 wakeups_rate=609 duration=74 because of excessive wakeups
Feb 17 08:36:08 ReportCrash Invoking spindump for pid=9331 wakeups_rate=573 duration=79 because of excessive wakeups
Feb 17 08:38:36 ReportCrash Invoking spindump for pid=9348 wakeups_rate=1503 duration=30 because of excessive wakeups
Feb 17 08:41:49 ReportCrash Invoking spindump for pid=9378 wakeups_rate=725 duration=63 because of excessive wakeups
Feb 17 08:45:39 ReportCrash Invoking spindump for pid=9390 wakeups_rate=398 duration=114 because of excessive wakeups
Feb 17 08:49:04 ReportCrash Invoking spindump for pid=9420 thread=174222 percent_cpu=63 duration=143 because of excessive cpu utilization
Feb 17 08:50:57 nsurlstoraged Error: execSQLStatement:onConnection:toCompletionWithRetry - SQL=COMMIT;, error-code=1, error-message=cannot commit - no transaction is active
Feb 17 08:51:18 mdworker Error loading /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter: dlopen(/Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotli ghtImporter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter, 262): Library not loaded: @rpath/MAFiles.framework/Versions/A/MAFiles
Referenced from: /Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImpo rter.mdimporter/Contents/MacOS/GarageBandSpotlightImporter
Reason: image not found
Feb 17 08:51:18 mdworker Cannot find function pointer MetadataImporterPluginFactory for factory UUID in CFBundle/CFPlugIn 0x7f8b9870c650 </Applications/GarageBand.app/Contents/Library/Spotlight/GarageBandSpotlightImp orter.mdimporter> (bundle, not loaded)
Feb 17 09:10:19 nsurlstoraged ERROR: unable to get the receiver data from the DB!
Loaded kernel extensions
net.telestream.driver.TelestreamAudio (1.1.0)
Daemons
com.adobe.fpsaud
com.apple.AccountPolicyHelper
com.apple.CodeSigningHelper
com.apple.Kerberos.kdc
- status: 1
com.apple.MobileFileIntegrity
com.apple.aelwriter
com.apple.awdd
com.apple.cache_delete
com.apple.cfprefsd.xpc.daemon
com.apple.coreduetd
com.apple.coresymbolicationd
com.apple.ctkd
com.apple.diagnosticd
com.apple.dpd
- status: 75
com.apple.icloud.findmydeviced
com.apple.iconservices.iconservicesagent
com.apple.iconservices.iconservicesd
com.apple.ifdreader
com.apple.nehelper
com.apple.networkd_privileged
com.apple.nsurlsessiond_privileged
com.apple.nsurlstoraged
com.apple.periodic-daily
com.apple.periodic-weekly
com.apple.sandboxd
com.apple.secinitd
com.apple.softwareupdate_download_service
com.apple.softwareupdated
com.apple.spindump
com.apple.sysmond
com.apple.systemstatsd
com.apple.tccd.system
com.apple.watchdogd
com.apple.wdhelper
com.bombich.ccchelper
com.eltima.ElmediaPlayer.daemon
com.google.GoogleML
- status: 1
com.google.keystone.daemon
com.microsoft.office.licensing.helper
com.oracle.java.Helper-Tool
com.rogueamoeba.hermes
com.vmware.launchd.vmware
- status: 78
com.zqueue.servetome-server
jp.co.canon.MasterInstaller
net.sourceforge.MonolingualHelper
org.cups.cupsd
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.ARM.UUID
com.amazon.cloud-player
- status: 78
com.amazon.music
com.apple.Safari
com.apple.photostream-agent
com.google.keystone.system.agent
com.maintain.SystemEvents
com.microsoft.SyncServicesAgent
com.mlbam.nexdef
com.oracle.java.Java-Updater
com.seagate.SeagateStorageGauge.plist
org.macosforge.xquartz.startx
User overrides
com.apple.imagent.monaco
com.apple.FTMonitor
com.apple.apsd-ft
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
Canon IJ Network Scanner Selector2
- missing value
Dropbox
- /Applications/Dropbox.app
ACbook
- /Volumes/ACbook
CrashPlan menu bar
- missing value
CrashPlan menu bar
- /Applications/CrashPlan.app/Contents/Helpers/CrashPlan menu bar.app
Canon IJ Network Scanner Selector EX
- /Applications/Canon Utilities/IJ Network Scanner Selector EX/Canon IJ Network Scanner Selector EX.app
Caffeine
- missing value
Firefox extensions
Mozilla Firefox hotfix
Hide My ***! Web Proxy
FoxyProxy Standard
Jesper Staun Hansen
Torrent Tornado
Torrent Finder Toolbar
Widgets
iStat nano
iCloud errors
bird 405
cloudd 68
CallHistorySyncHelper 6
Safari 4
accountsd 2
Continuity errors
lsuseractivityd 8
Safari 2
Restricted files: 43
Lockfiles: 22
Accessibility
Keyboard Zoom: On
Scroll Zoom: On
Contents of /Library/LaunchAgents/com.maintain.LogOut.plist
- mod date: Feb 9 20:01:50 2015
- checksum: 2486542021
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.LogOut</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to log out</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.Restart.plist
- mod date: Feb 9 19:55:16 2015
- checksum: 1856196442
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.Restart</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to restart</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.ShutDown.plist
- mod date: Feb 9 19:55:17 2015
- checksum: 2131448796
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.ShutDown</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to shut down</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.Sleep.plist
- mod date: Feb 9 20:01:53 2015
- checksum: 2684026111
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.maintain.Sleep</string>
<key>ProgramArguments</key>
<array>
<string>/usr/bin/osascript</string>
<string>-e</string>
<string>delay 3</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>do shell script "killall Cocktail"</string>
<string>-e</string>
<string>end try</string>
<string>-e</string>
<string>ignoring application responses</string>
<string>-e</string>
<string>try</string>
<string>-e</string>
<string>tell application "System Events" to sleep</string>
...and 7 more line(s)
Contents of /Library/LaunchAgents/com.maintain.SystemEvents.plist
- mod date: Feb 9 19:55:17 2015
- checksum: 1297325733
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.maintain.SystemEvents</string>
<key>ProgramArguments</key>
<array>
<string>/System/Library/CoreServices/System Events.app/Contents/MacOS/System Events</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist
- mod date: Feb 6 15:45:52 2015
- checksum: 655956191
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>17</integer>
<key>Minute</key>
<integer>49</integer>
<key>Weekday</key>
<integer>1</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchAgents/com.seagate.SeagateStorageGauge.plist
- mod date: Mar 10 08:38:47 2010
- checksum: 3262128215
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<!--
com.seagate.SeagateStorageGauge.plist
SeagateDiagnostics
Created by John Brisbin on 3/10/10.
Copyright 2010 Seagate Technologies LLC.. All rights reserved.
-->
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.seagate.SeagateStorageGauge.plist</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/Seagate/Seagate Storage Gauge.app/Contents/MacOS/Seagate Storage Gauge</string>
<string>-doautolnch</string>
<string>/Library/Application Support/Seagate/Seagate Storage Gauge.app</string>
</array>
<key>RunAtLoad</key>
...and 3 more line(s)
Contents of /Library/LaunchDaemons/com.bombich.ccchelper.plist
- mod date: Feb 6 13:35:20 2015
- checksum: 495358405
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.bombich.ccchelper</string>
<key>MachServices</key>
<dict>
<key>com.bombich.ccchelper</key>
<true/>
</dict>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.bombich.ccchelper</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.crashplan.engine.plist
- mod date: Jan 10 11:46:36 2015
- checksum: 757054163
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.crashplan.engine</string>
<key>UserName</key>
<string>root</string>
<key>GroupName</key>
<string>wheel</string>
<key>Nice</key>
<integer>20</integer>
<key>KeepAlive</key>
<true/>
<key>OnDemand</key>
<false/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/CrashPlan.app/Contents/Resources/Java</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/CrashPlan.app/Contents/MacOS/CrashPlanService</string>
...and 26 more line(s)
Contents of /Library/LaunchDaemons/com.eltima.ElmediaPlayer.daemon.plist
- mod date: Oct 9 06:40:45 2012
- checksum: 1274124936
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<false/>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.eltima.ElmediaPlayer.daemon</string>
<key>LaunchOnlyOnce</key>
<true/>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/ElmediaPlayer/empdaemon</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.google.GoogleML.plist
- mod date: Mar 10 10:19:30 2008
- checksum: 315725308
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.GoogleML</string>
<key>OnDemand</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Google/GoogleML/GoogleML.bundle/Contents/MacOS/googleml-modwat ch</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>UserName</key>
<string>root</string>
<key>WatchPaths</key>
<array>
<string>/Library/Google/GoogleML/Modules</string>
<string>/Library/Google/GoogleML</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.rogueamoeba.hermes.plist
- mod date: Jul 15 21:05:58 2008
- checksum: 1539233627
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>GroupName</key>
<string>wheel</string>
<key>Label</key>
<string>com.rogueamoeba.hermes</string>
<key>ProgramArguments</key>
<array>
<string>/usr/local/hermes/bin/hermesctl</string>
<string>update</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ServiceIPC</key>
<true/>
<key>UserName</key>
<string>root</string>
<key>WatchPaths</key>
<array>
<string>/usr/local/hermes/modules</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.vmware.launchd.vmware.plist
- mod date: Nov 2 16:11:08 2007
- checksum: 1467462916
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN"
"http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.vmware.launchd.vmware</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/VMware Fusion/boot.sh</string>
<string>--start</string>
</array>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.zqueue.servetome-server.plist
- mod date: Sep 22 07:54:14 2014
- checksum: 1392131937
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/Library/Application Support/ServeToMe/incoming/settings.xml</key>
<true/>
</dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>Label</key>
<string>com.zqueue.servetome-server</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.zqueue.servetome-server</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>ThrottleInterval</key>
<integer>5</integer>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/jp.co.canon.MasterInstaller.plist
- mod date: Nov 11 12:21:11 2014
- checksum: 4111951265
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>jp.co.canon.MasterInstaller</string>
<key>Program</key>
<string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/jp.co.canon.MasterInstaller</string>
</array>
<key>ServiceIPC</key>
<true/>
<key>Sockets</key>
<dict>
<key>MasterSocket</key>
<dict>
<key>SockFamily</key>
<string>Unix</string>
<key>SockPathMode</key>
<integer>438</integer>
<key>SockPathName</key>
<string>/var/run/jp.co.canon.MasterInstaller.socket</string>
<key>SockType</key>
...and 5 more line(s)
Contents of /Library/LaunchDaemons/net.sourceforge.MonolingualHelper.plist
- mod date: Sep 16 12:53:32 2012
- checksum: 4229206510
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>net.sourceforge.MonolingualHelper</string>
<key>MachServices</key>
<dict>
<key>net.sourceforge.MonolingualHelper</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/net.sourceforge.MonolingualHelper</strin g>
</array>
</dict>
</plist>
Contents of /System/Library/Security/authorization.plist
- mod date: Jan 7 19:31:13 2015
- checksum: 2720110640
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>comment</key>
<string>The name of the requested right is matched against the keys. An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
allow rule: this is always allowed
<key>com.apple.TestApp.benign</key>
<string>allow</string>
deny rule: this is always denied
<key>com.apple.TestApp.dangerous</key>
<string>deny</string>
user rule: successful authentication as a user in the specified group(5) allows the associated right.
The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
See remaining rules for examples.
</string>
<key>rights</key>
<dict>
<key></key>
<dict>
<key>class</key>
<string>rule</string>
<key>comment</key>
...and 1850 more line(s)
Contents of /private/etc/authorization.deprecated
- mod date: Sep 30 13:39:21 2013
- checksum: 2773682028
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>comment</key>
<string>The name of the requested right is matched against the keys. An exact match has priority, otherwise the longest match from the start is used. Note that the right will only match wildcard rules (ending in a ".") during this reduction.
allow rule: this is always allowed
<key>com.apple.TestApp.benign</key>
<string>allow</string>
deny rule: this is always denied
<key>com.apple.TestApp.dangerous</key>
<string>deny</string>
user rule: successful authentication as a user in the specified group(5) allows the associated right.
The shared property specifies whether a credential generated on success is shared with other apps (i.e., those in the same "session"). This property defaults to false if not specified.
The timeout property specifies the maximum age of a (cached/shared) credential accepted for this rule.
The allow-root property specifies whether a right should be allowed automatically if the requesting process is running with uid == 0. This defaults to false if not specified.
See remaining rules for examples.
</string>
<key>rights</key>
<dict>
<key></key>
<dict>
<key>class</key>
<string>rule</string>
<key>comment</key>
...and 9729 more line(s)
Contents of /private/etc/ssh_config
- mod date: Oct 1 12:06:10 2012
- checksum: 1281775184
Host *
SendEnv LANG LC_*
Host *
XAuthLocation /opt/X11/bin/xauth
Contents of Library/LaunchAgents/com.adobe.ARM.UUID.plist
- mod date: Aug 21 15:00:01 2010
- checksum: 2170691092
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.adobe.ARM.UUID</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Adobe Reader 9/Adobe Reader.app/Contents/MacOS/Updater/Adobe Reader Updater Helper.app/Contents/MacOS/Adobe Reader Updater Helper</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>12600</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.amazon.cloud-player.plist
- mod date: Feb 22 10:43:22 2014
- checksum: 2707474481
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.amazon.cloud-player</string>
<key>Program</key>
<string>/Applications/Amazon Cloud Player.app/Contents/MacOS/Amazon Music Helper</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.amazon.music.plist
- mod date: Jan 12 15:51:16 2015
- checksum: 3668832669
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>EnableTransactions</key>
<false/>
<key>KeepAlive</key>
<true/>
<key>Label</key>
<string>com.amazon.music</string>
<key>Program</key>
<string>/Applications/Amazon Music.app/Contents/MacOS/Amazon Music Helper</string>
<key>RunAtLoad</key>
<true/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.FolderActions.folders.plist
- mod date: Feb 17 09:08:58 2015
- checksum: 1189540302
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.FolderActions.folders</string>
<key>Program</key>
<string>/usr/bin/osascript</string>
<key>ProgramArguments</key>
<array>
<string>osascript</string>
<string>-e</string>
<string>tell application "Folder Actions Dispatcher" to tick</string>
</array>
<key>WatchPaths</key>
<array/>
</dict>
</plist>
Contents of Library/LaunchAgents/com.apple.SafariBookmarksSyncer.plist
- mod date: Jul 31 12:13:01 2010
- checksum: 2859079559
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.apple.Safari</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/Safari.app/Contents/SafariSyncClient.app/Contents/MacOS/S afariSyncClient</string>
<string>--sync</string>
<string>com.apple.Safari</string>
<string>--entitynames</string>
<string>com.apple.bookmarks.Bookmark,com.apple.bookmarks.Folder</string>
</array>
<key>RunAtLoad</key>
<false/>
<key>ThrottleInterval</key>
<integer>60</integer>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Library/Safari/Bookmarks.plist</string>
</array>
</dict>
...and 1 more line(s)
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist
- mod date: Feb 17 01:22:03 2015 -
created a new folder in bookmarks; when try to add new bookmark, new folder does not appear in drop down menu; using safari for windows
You are using an older version of firefox, upgrade your browser to Firefox 8 and try
* getfirefox.com -
hi i got a new airport express for christmas and i set it up as per instructions ,i even give a static ip and wpa2 security ..the problem is is when i come to want to use it it says its not on my network and a orange triangle shows .when i reboot it works..then if i leave it a while and try iy agian its disapeared of my network...i have a bt hub 3 ....any help please ..im not sure if itsa faulty express
I really don't have an answer for that one. I guess that while trying to get things working correctly, I would use the most basic monitor I had which in your case would be the Eizon using the Thunderbolt port and adaptor.
When you boot into Safe Mode the startup is quite slow, but you should get the Apple logo and then the spinning gear below it (release the SHIFT key when it appears.) Then after a little more time you should see a gray progress bar appear below the spinning gear. When that disappears the computer will startup to a login screen. -
I just received a brand new iPod touch as a gift. But when I try to play music on it the speaker is extremely slow. When I plug in headphones I hear nothing. Tried multiple headphones. Tried a restore. It never dropped or anything
Try here:
iPod touch: Hardware troubleshooting
You said you restored the iPod. Was the restore successful, that is, it went though all the steps without errors?
Try a restore to factory settings/new iPod if yuhave not doe so so far.
Are you using the headphones that came with the iPod? Are you inserting the plug fully
Have you tried another set of headphones in the iPod?
The speaker is not that loud. -
Why does my iphone 3gs shut down when battery shows 80%. a couple of months ago is shut down at 60% but has continually gotten worse. this was before 5.0. i took it to a repair man and he tried a used battery, a new battery, and the original battery. nothing helped. 5.01 didnt help either. What is my problem?
Fully discharge the battery (till it shuts down and won't turn on) and then fully recharge it (100%). This will recalibrate the battery meter. You may need to do this a few times.
-
Internet speed slows down when connected via airport express
Internet speed slows down when connecting via airport express. When connecting directly via the timecapsulethe internet speed is ok, when connecting via the airport express the speed slows down.What can I do to change that? Any suggestions?
Turn off the AirPort Express completely as a test, and move your computer very close to the location of the Express.
As I said before, the Express can only extend the bandwidth (speed) that it receives from the Time Capsule, so the speed that you see there with the Express powered off will be the fastest speed of which the Express is capable.
The Express will make the signal go further when it extends....but it will not make the signal go faster.
A good location for a device that extends wirelessly is a point that is about half the distance from the Time Capsule and the general area that needs more wireless coverage.
If you locate the AirPort Express too far from the Time Capsule or there are more than a couple of walls in the signal path, the signal will be very slow by the time that it reaches the Express....and the Express simply extends a signal that has already slowed down significantly.
If you already have the Express located about half the distance between the Time Capsule and general area that needs more wireless coverage, how many walls, ceilings or other obstructions are there in the signal path between the Time Capsule, the AirPort Express and the area that needs more coverage?
Often, due to obstructions, it is just not possible to achieve good performance when you try to extend a network wirelessly. The solution is connect the AirPort Express to the Time Capsule using a wired Ethernet connection.
There is virtually no signal loss with this type of connection, so the Express can be located exactly where it is needed and it will produce a much faster wireless signal in this type of setup. -
Can you explain when using keywords and addding them to various clips pressing ctrl and a number eg. 1 or 2 it simply closes down FCPX. Just to the dock as would the yellow -sign. I am new to this program having only used Final Cut Express 4 previously.
iMac (early 2009) 24in 2.93GHz 4GB 1066MHz DDR3 SDRAM (To be upgraded ot 8GB in the nextfew days) os x 10.7.2 Lion
Re: Why don't my arrows on the time line operate and allow me to move to the start and end of the timeline. Iam using the trial versionCheck System Preferences. I think Control-1 is used by something in the OS now. Switch it off. It's a major p[ain the way the OS is taking over more and more of the keyboard, allowing less options for application use.
-
Can I use an old Airport Extreme as an extender with a new Airport Express
Hi All, I have Verizon Fios and the data line runs into my bedroom. I purchased a new Airport Express today to replace the Airport Extreme (from 2006). Can I use the old Airport Extreme as an extender (I'd like to set it up in the basement as I get poor connectivity there). I tried using the Airport Utility - Other WiFi Devices to find the Airport Extreme, but it's not registering. Is what I'm attempting possible? If so, how do I set it up?
Can I use the old Airport Extreme as an extender
Is this the "round" or "dome" shaped AirPort Extreme?
If yes, then it is not possible to have the AirPort Extreme wirelessly "extend" the signal from the AirPort Express.
However, the older AirPort Extreme can probably be set up to provide more wireless signal coverage if it will connect back to the LAN <--> port on the AirPort Express using a permanent, wired Ethernet cable connection.
In this case, the setup of the older AirPort Extreme will require that you have an older version of AirPort Utility installed on your computer. If it is a Mac, then the Mac must be running Leopard (10.5.x), Snow Leopard (10.6.x), or a PC with AirPort Utility could be used to set up and configure the older Extreme.
f you have the "square" or "flat" version of the AirPort Extreme, then everything becomes much easier. Post back if you do. -
Using my Actiontec modem's wifi, it doesn't find my new airport express. Using the new airport express network I just set up it says the ip address is invalid. What can I do to overcome this blinking amber light and error messages?
You need to begin by configuring the AEX to Join an existing network (Bridge Mode.) You can then connect to it using Wi-Fi, but the AEX will not extend your existing network.
If you can connect the AEX to your existing router using Ethernet, then you could use it to Create a new network. Otherwise, if you want to extend your existing network you will need to get a Wireless Access Point - WAP - from a non-Apple product like D-Link. -
Finder is very slow, particularly when using network drive
I have a mid-2011 Macbook Air, OSX 10.9.4, and Finder is extremely slow, particularly when I am navigating my Time Capsule. First, a little history.
I have tried the fixes listed in these three threads:
(1) https://discussions.apple.com/thread/3358265?searchText=finder%20slow
(2) https://discussions.apple.com/thread/1324280?searchText=Finder%20is%20slow
(3) https://discussions.apple.com/thread/5495797?start=30&tstart=0
Second, my Time Capsule is new. I bought it to replace a WD MyBook that used to work really well, and then something changed. Unfortunately, I assumed that it was some problem on WD's side, so after a year or two of waiting to see if either WD or Apple issued an update to fix it, I assumed it was some kind of file system incompatibility (or other interoperability problem) that wasn't likely to go away, and just sprung for the Time Capsule. However, after getting all the files on the Time Capsule, the problem remains. So here's a rundown of what I experience:
When I navigate the directories on my Time Capsule, if I haven't been in a particular folder, it takes a very long time to load the contents. On average, it will be 30 seconds, but it is not uncommon for it to be over a minute. This can happen even if a folder is empty or has just a few files in it. In addition, adding a subfolder and trying to rename it takes a very long time. After renaming a new folder, it can then take another full minute or more for the folder to actually show the newly assigned name and bounce into line in alphabetical order.
Here are some other observations. First, my connection is very fast, as I'm directly connected to the Time Capsule (albeit via wireless). Second, there is clearly something extra going on in Finder that is contributing to this issue, because I navigated to different directories using Terminal and did an "ls" command, and as you would expect, the list fired out virtually instantaneously. Yet, right after that, if I clicked on that same folder with Finder, it would take a minute or more to display the same file names.
Could it be that the Finder is doing other things at the same time as it is giving me a list of what is in the directory? For example, could the Finder be loading ALL metadata for each of the files into some database or index being built on the fly every time I pop into a new folder, even if I'm not using a view mode where I am asking to see those other bits of metadata? If so, that might make sense as I generally am using the network drive to navigate directories of my photographs, and they have a lot more categories of metadata associated with them than do Word docs and PDFs (e.g., date of picture, time of picture, aperture, shutter speed, exposure, etc.). Or, perhaps is Finder trying to load previews of ALL of the files whenever a directory request is made, so that bouncing through the previews takes less time? I sort of doubt that, because even after a directory listing finally comes up, it seems to churn a bit on each photo before the preview comes up, which I take as an indication that it's creating each preview only after a request is made for that particular file. Either way, I will say that in old WinXP and even in the newer Windows 7, if you want to view files in a Detailed setting where you can see other metadata (called "Attributes"), it definitely prioritizes giving you a directory listing, and then continues filling in the various selected Attributes one-by-one after that. Thus, if you want to sort by the date a photograph was taken (as opposed to its modified or created date, which seem to be default attributes that load as quickly (or nearly as quickly) as the filename), or by the photo's dimensions, it might take a few minutes to load in those attributes for a folder of a couple thousand pictures. But, critically, if you are not planning on using those attributes, but rather, merely want to see how many files you have in that folder, or select them all and load them into a photo viewer, you won't have to wait for the file system to load the file attributes before you get a listing of the folder's contents. It seems to me like the Finder, however, might actually be forcing you to wait until it has loaded all of those attributes.
Does the foregoing sound like a plausible explanation of the problem to those out there with knowledge of how Finder actually works? And if so, does that bring to mind any potential settings that could be turned off or any other work-arounds (since those I've tried have not fixed the issue)?
If anyone has other ideas, I am all ears. I am pretty annoyed that I sunk time into switching over to a Time Capsule on the assumption that Apple couldn't have had a bug this bad, only to find out that I was wrong. The biggest irony is that my old WinXP computer used to rip through the folder structures with ease on the MyBook, but my fully updated Air is practically crippled by the same task.Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.
Maybe you are looking for
-
Add entries to database tables using update function module
Hi All, I have a small requirement, in which I need to update Z-tables usimg update function module in update task. In the calling program, I have gathered the data in a field symbol value of type any. I need to pass the same to that function module
-
Reporting Score in Solo Learning LMS
I have read through the message thread and see that there are other folks having difficulty getting quiz scores to report on various LMS platforms. Does anyone have suggestions on how to get the score to report from a Captivate3 SCORM 1.2 course to t
-
Hi all, I'm racking my brain with this one. I typed http://192.168.10.252/localdirectory into a web browser and was hoping to get an xml view of my CME phone directory instead I get an XML browser error: âThe XML page cannot be displayed Cannot vie
-
Illustrator crashes right after startup
Yesterday I have bought Adobe CC, and installed Illustrator. After the initial installation, I have watched some " Whats new" video's, and every time I clicked Done/Finished, Illustrator crashed. It still does. I have browsed the forums, tried every
-
Component for flexibility billing
Hi I want to check if in our ECC6 EHP6 system if "SAP Flexibility Billing " is available or not. Which component i need to check in system -> status. Kindly advice.