Does NF980-G65 take ECC/Registered RAM?

I know that it's not on the official list of tested, supported RAM, but does the NF980-G65 accept any ECC/Registered RAM modules? I can't find information on them anywhere. Anyhelp would be appreciated.

Your board does not support Registered ECC RAM. You have to use unregistered non-ECC RAM.
QVL list of RAM
http://www.msi.com/uploads/test_report/TR10_1885.pdf
Manual
http://global.msi.eu/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=1885

Similar Messages

ECC Registered RAM & MSI MOBO

I was thinking of getting an MSI KT3 Ultra2(6380E-050) MOBO to replace A POS Gigabyte GA-7DXR+ but I want use the PC 2100 DDR ECC Registered RAM that I was using with the Gigabyte board.
dose any one know if ECC Registered RAM will work with the MSI board?
Thanks.

Quote
Originally posted by Woody dose any one know if ECC Registered RAM will work with the MSI board?
Thanks.
It should. I have one 512 MB stick of ECC on this KT3 Ultra board, and two of them on another (non-windoze) and both work flawlessly. The board will not use ECC functionality however.

Why does WFE server take 95% of RAM in Project server 2010

Hi everyone,
I have lunched a project server 2010 in a farm with 3 servers: application server, WFE and Report server
application server: 8G RAM
WFE:8G RAM
report server:8G RAM
I have no idea why WFE take more than 95% of RAM while there are just 3 project server-related processes:
w3wp.exe = 491M
w3wp.exe=212M
owstimer.exe=330M
what should I do?

8 GB is the MINIMUM amount of memory a SharePoint server should have. That you're using 95% isn't necessarily surprising.
Is this a Hyper-V VM using dynamic memory?
Where are the search service components running? Are there any crawls in progress?
Where is SQL Server running? Another server you haven't listed?
Task Manager should list all the processes. You can sort by memory and you should see where it's going.
Alternatively you can set up a performance monitor log to determine which processes are taking the most memory.
Jason Warren
@jaspnwarren
jasonwarren.ca
habaneroconsulting.com/Insights

[RESOLVED]NF980-G65 Hang on windows 7 install. Unable to boot

Hello,
I'm a bit at wit's end here. My old non-MSI motherboard was failing and giving me loud beep errors, so I decided to replace it. In doing so I was required to update basically the whole computer in order to keep up with tech trends and my new LCD monitor.
I bought an MSI NF980-G65, 4 gb ddr3 RAM, an ADM 64 250 dual core, and a Nvidia GTX 260. After I installed the hardware, I was unable to access windows vista 32 on my old hard drive. I assumed this was because of driver conflicts. Because I had no install discs (only upgrade/recovery discs) I was unable to boot from CD, so I purchased windows 7. Regardless of which disc(32 or 64) I use when I set my boot sequence in BIOS to boot from the CD first, this is what happens:
The screen shows a white loading bar that says "Windows is loading"
The next screen shows "Starting Windows" with a small "microsoft corporation" logo below it. It sometimes has a red pixel on the screen.
The next screen it flips to is all blank. From there it does nothing, no matter how long I leave it.
I have tried booting with no graphics card(internal only)
I have tried booting with no HD attached.
I have tried booting with only one HD attached (of two I've done this both ways)
My HD's have been checked and they are fine
I have tried booting using another dvd rom drive
I have tried swapping IDE HD slots with that of the dvd.
the DVD does use a pci extension card because the sable is not long enough for the dvd player, but regardless of where that IDE cable is plugged in, it still hangs in the load screen and does not go anywhere.
I've seen this symptom mentioned, but not per this motherboard, it seems like a BIOS setting issue but I feel like I've tried them all (disable LAN etc).
If I try to boot to the old Vista 32 install, it says "starting windows" but the logo does not appear, and the progress bar does not fill.
If I try booting vista 32 in any safe mode the load hangs on a .sys file.
Does anyone have any idea what I can do to get this going in the right direction? This has become very frustrating.
Thanks,
Alex
*****[RESOLUTION]This issue has been resolved. I switched to a different motherboard (GIGABYTE) and everything worked out peachy.

I hope this helps:
# AMD, Athlon II X2 3.0 ghz dual core
# SLI and Hybrid SLI ( other writing in that are is N1996) BIOS A7612NMS v.10 082809
# 2GB DDR3 Kingston Hyper 1333 CL7 240 Pin Kit 2 pcs ( I have two available to use)
# EVGA NVidia GeForce GTX 260 896 mb ddr3
# Hard Drives :IDE 40GB WDC WD400BB-01 Hard drive(s) I cant access them easily right now due to an injury, please let me know how badly this info is needed.
# I have a card in the PCI slot being used to extend the reach of my IDE cable for the DVD player to the bottom of the board.It isn't labeled but it reads the Drive in BIOS fine.
# I am trying to install either windows 7 64(preferred) or 32bit
# Corsair TX 750 WattsPower Max load of +3.3v =30A, Max Load of +5v=28A combined max output 180w, +12v=60A/720W, 12v=.8A/9.6w,5vsb=3A/15w
Quote from: chef jeff on 05-November-09, 20:05:08
What are your complete system specs? Need the complete picture. What ram and timings? Tried 1 dimm in slot closest to cpu?
Since posting this I have tried formatting my Small drive listed above. I was only able to erase the info using Killdisk. The format from windows using my old Motherboard (Abit) would not work. Last night I let the system try to install windows 7 all night, I had 2gb of ddr3 in 1 dimm slot closest to the cpu. I connected only the above drive after it was whiped, no graphics card (limited on board graphics are on the motherboard) and the install still hung as usual. Does Killdisk do some sort of improper format? I had assumed that it would erase all data to provide a clean slate. But I don't even thing a HD is required in order to boot up to the main setup screen?
Do I have voodoo in my machine?

NF980-G65 ram problems

when i use GSKILL ram witch i have never had a problem. i use a receiver for all my signals video/audio. so if i ever have any thing happen. i can tell. what the receiver dose is act like the signal is looping every second. but there is never a video signal (just a TV no signal blue screen). that is what happens.
now the cause. i put in extra ram. being 4 GB more. same exact ram. 9-9-9-24
G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL Dual Channel Kit - Retail.
a total of 8 GB of ram, but when i did that happened. i take out the ram it was fine. so i thought ok well it could be the new ram. then put the new ram in. then it was fine so long as there was only 4 GB's in . when i put in one of the of the sticks (being 6 GB) 2 GB extra it just did nothing. the board works fine for im using it now to send this, but with 4 GB's of ram and there is an APP i need to use. and can't because it won't hold the extra ram. and when i get the ram working i know i will need a 64-bit windows. the app was using 71 to 82% of 4 GB's of ram. so i need to know if there is something in BIOS i need to set. or if i need different ram.
NF980-G65 MS-7612 VER 1.0 | BIOS VER 1.1
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 125W
Antec TruePower Quattro TPQ-1000 1000W Continuous Power ATX12V / EPS12V SLI Certified
Rosewill Silicon Image RC-209-EX PCI External e-SATA x2/ Internal SATA x4 1.5G HDD Controller Card
13 drives 5 external and 8 internal a total of 8,402 GB's after format.
nVIDIA 9400 GT (i know its old)
Creative® SB X-Fi Xtreme H/W Audio Card (MS-4132) from a K9N2 Diamond. i use it for the optical output.

Quote from: nathon5000 on 05-March-10, 15:25:00
good info. i did not know most of that. some i did.
i will try 1333 Mhz. i will let you know on this post. if it works. how ever i know that 1066 dose work. the board info.
on the main site. says
Supports Dual DDR3 800/1066/1333/1600/1800/2133 (OC)
- 4 DDR3 DIMMs (240pin / 1.5V)
- Supports a maximum memory size up to 16GB.
i did see that and i check the MSI site. every time i buy a new board. oh and fast reply. im really glad to learn something.
It's down to the CPU[memory controller is build in there] not board.
Quote
i will try 1333 Mhz. i will let you know on this post. if it works.
With 2 sticks - full speed [1333, max. supported native speed by CPU],
with 4 sticks you probably will need to reduce the freq. with one level.[e.g 1066 like its current and works]

Hi. I am going to be buying a macbook air 2012 soon with 4 GB of RAM and wondering how much memory space does norton AV take up and does it drastically slow down the mac. Thanks a lot :)

Hi
I am going to be buying a macbook air 2012 model with 4 GB ram soon. I was wondering how much space (memory) does Norton AV take up and does it drastically slow down the computer. Also, I am going off to uni so will predominantly be using the laptop for surfing and MS office.
Thanks a lot

Sorry to disagree mende1. In this age of email attachments and social networks, it is actually a good idea to have a good antivirus on your system. {I realize that this is a religious argument and I will say no more}. With that said, the general concensus is that Norton AV is terrible. It is intrusive and uses up a lot of cycles.
There are a lot of better AV clients out there. I use ClamXav which is free and uses the clamav antivirus that is open source.

TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
Thankyou in advance for your help.
Terrence

Hey terremo,
Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Thanks,
Matt M.

Does HYBRID SLI works in WINDOWS 7 in NF980-G65?

Hello everyone
I have recently installed win 7 on my nf980-g65. According to my information and mobos paper an icon that shows HYBRID POWER and GEFORCE BOOST must come in taskbar.I have 9800gt and it is compatible with HYBRID POWER. Does anyone have done it yet?
Thanks

Thanks Mugen G
But in bios there is a HYBRID SLI option that we can choose it also in the help of mobo there is a description about that.So it must work.
It is a great ability specially when you want reduce the noise of your computer.Main source of noise that you cant do much about them are vga cards.By this ability you can turn it off completely for simple works like internet surfing or office programs and use onboard graphic .

Does the NF980-G65 support RAID arrays over 2TB?

Looking to build a new machine fro Windows 7 (and switch to 64bit at the same time), and the NF980-G65 seems to be the closest board to my needs, just a quick question, does the onboard raid controller support raid arrays over 2TB in size? I had a look at the manual and it has a section on migrating an array to a size over 2TB which would suggest it does, but I would like some confirmation as to whether it does or not.

I've run into this problem with some raid cards when building servers for work, as they were unable to address raid arrays over 2TB and would not allow the creation of the array, I am wondering if the raid controller has the right level of LBA to create a 2TB+ array. I am aware of the need to use a GPT partition to have a partition of over 2TB.

GSkill 1600Mhz Ram on NF980-G65 Please post stable settings here for 1600Mhz

G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model F3-12800CL9D-4GBRL on NF980-G65 Mobo.
Please post here about what settings you are using to run this ram stable on NF980-G65 Mobo.
Exactly what are you setting in the bios? Voltage= ? Anything else?
Our knowledge of knowing what works & how, can be greater then what we get told by some Reps.
Please, let us help each other to help ourselves. We know better, we really use these Mobos.

Believe Mike's statement was "not going to gain anything significant" rather than "won't gain anything". In my experience, a stable 1333 is far better than a problematic 1600. With some tweaks, 1333 can rival basic 1600 performance anyway. Should as little of a gain as 1 or 2 FPS at 1600 speed be considered significant? IMHO, CPU & VGA have a bigger influence on performance than RAM. This isn't helping answer your thread's original topic question however, so I hope Vorg or others can come back with some specifics that worked for them. Many times, even with similar systems & components, the results can't be duplicated unfortunately.

HT1635 does macbook 7,1( 13 inch-mid 2010) take 8gb of ram?

does macbook 7,1( 13 inch-mid 2010) take 8gb of ram?and which hardrive upgrade whould be advisable for my mac?

Ntu2ko wrote:
is a seagate 3.5 hardrive 1000GB(7200rpm) better than a 2.5 hadrive?and does it fall under SSD hardrives?
No it is not an SSD because it has a rotating speed. Solid-State Drives have no moving parts. This drive rotates @ 7200 RPM it has a moving disk. A 3.5" drive will not fit in your MacBook Pro, and I don't think that having a 3.5 is any better than having a 2.5. I'm not 100% sure, I'll get back to you on that. I'm pretty sure there's no difference.

Does the NF980-G65 support the newest AMD Phenom II X6 1100T Thuban 3.3G

According to the CPU support list...
http://www.msi.com/product/mb/NF980-G65.html#/?div=CPUSupport
...it stops at 1090T.
Is that list up to date?
Thanks

It should run just fine with that CPU if you have the latest BIOS. Others have said it"s OK.

MOVED: help/suggestions: MSI NF980-G65 + Kingston HyperX 1600

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=136364.0

Quote from: ericmac017 on 11-March-10, 10:26:59
Hey everyone, so I have a NF980-G65 mobo with the kingston hyperx mem (KHX1600C8D3K2/4GX) and I'm trying to find stable clocks for the ram. Also I'm runnin an AMD Phenom II 955 @ 3.8ghz. Anyways take a look at my picture here..
My question is, are my timings acceptable here for stability purposes? I read in another forum that the Phenom II's run better with lower "tighter" timings. However as you can see in my pic I have a LinX stress test results showing it passed all 20 loops with ALL memory selected @ timings of 8-8-8-24 @ 1.67V. If I pass this test, does this mean I'm very stable? Also, if someone else has this mobo with this ram, have you overclocked any higher? Thanks everyone
Too much voltage brother
you should darn near never hit above 52*C on a Deneb... anything above 50*C and you start to loose performance. Your borderline Max hitting 57*-58*C
Remember Cool 1st...OC Later.

Help/suggestions: MSI NF980-G65 + Kingston HyperX 1600

Hey everyone, so I have a NF980-G65 mobo with the kingston hyperx mem (KHX1600C8D3K2/4GX) and I'm trying to find stable clocks for the ram. Also I'm runnin an AMD Phenom II 955 @ 3.8ghz. Anyways take a look at my picture here..
My question is, are my timings acceptable here for stability purposes? I read in another forum that the Phenom II's run better with lower "tighter" timings. However as you can see in my pic I have a LinX stress test results showing it passed all 20 loops with ALL memory selected @ timings of 8-8-8-24 @ 1.67V. If I pass this test, does this mean I'm very stable? Also, if someone else has this mobo with this ram, have you overclocked any higher? Thanks everyone

Quote from: ericmac017 on 11-March-10, 10:26:59
Hey everyone, so I have a NF980-G65 mobo with the kingston hyperx mem (KHX1600C8D3K2/4GX) and I'm trying to find stable clocks for the ram. Also I'm runnin an AMD Phenom II 955 @ 3.8ghz. Anyways take a look at my picture here..
My question is, are my timings acceptable here for stability purposes? I read in another forum that the Phenom II's run better with lower "tighter" timings. However as you can see in my pic I have a LinX stress test results showing it passed all 20 loops with ALL memory selected @ timings of 8-8-8-24 @ 1.67V. If I pass this test, does this mean I'm very stable? Also, if someone else has this mobo with this ram, have you overclocked any higher? Thanks everyone
Too much voltage brother
you should darn near never hit above 52*C on a Deneb... anything above 50*C and you start to loose performance. Your borderline Max hitting 57*-58*C
Remember Cool 1st...OC Later.

Hybrid sli msi nf980-g65 how to?

evening all
here's the relevant specs
msi nf980-g65
bios ami v1.1
950w COOLMAX CUG-950B 950W ATX12V V.2.2 SLI Certified CrossFire Ready Modular Active PFC Power Supply
AMD Phenom II X4 965 Black Edition Deneb 3.4GHz 4 x 512KB L2 Cache 6MB L3 Cache Socket AM3 140W Quad-Core Processor
8 gigs ram 2gb x 4 modules [OCZ Gold 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model OCZ3G1600LV4GK]
2 x EVGA 512-P3-N871-AR GeForce 9800 GTX+ 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported Video Card
o/s windows xp x64 pro sp3 updated to oct 2009
all the basics work fine. all drivers are most recent within hours of this post.
the ram is underclocked. no o/c on anything
nvidia control panel has all the bells and whistles except for...hybrid sli options
the chipset is capable, and the vid cards are compatable.
any help avail to get this running? ill take a link if u dun feel like spoon feeding
tyia

Quote from: Henry on 18-October-09, 13:16:55
What you are asking does not make any sense regarding Hybrid SLI. For Hybrid SLI you need a single GeForce 8400 or 8500 graphic card to boost 3D graphics performance with on board graphic card.
Are you actually wanting to do normal SLI with the two 9800GTX+ cards?
Edit: What's wrong with the instructions in your manual? If the paper manual you have is not adequate try the PDF one from >> here <<, maybe it shows more than the paper one you got with the MB. See SLI instructions starting at page 2-22.
any1 else want to take a shot at this who understands the difference between hybrid and geforce boost and is also aware that hybrid is not limited to 1 gpu + mGpu but can be used in dula and tri-sli configurations?

Does NF980-G65 take ECC/Registered RAM?

Similar Messages

Maybe you are looking for