Does NI-DAQ version 4.8x or 4.9x support the NI PCI-6503 card?

NI-DAQ 6.6 does not support Superlab, an application we use. Superlab says to use NI-DAQ 4.8 or 4.9. Does NI-DAQ 4.8 or 4.9 support the PCI-6503 card?

No, you will need NI-DAQ version 5.0.5 or greater to use with the PCI-6503 board. (Version 6.9.1 is suggested however.) I would contact the providers of Superlab to see if they have an upgrade.
If you are looking to do data acquisition programming, I would suggest looking into LabVIEW.
Brian

Similar Messages

  • Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera.  Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

    just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera.  Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

    The D610 didn't get out-of-the-box RAW support until Photoshop CC.
    You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

  • Everytime I open Safari I get a message that says the "Safari version you are using doesn't support the Community Toolbar."  Does anyone know what this means?

    Everytime I open Safari I get a message that says "we're sorry but the Safari browser version you are currently using does not support the Community Toolbar." Does anyone know what this means?

    Have a read at this thread https://discussions.apple.com/message/15620421#15620421 with similar problem and a solution.
    Stefan

  • Does CS6 or Elements 11 camera raw plug-in support the panasonic raw file format rw2

    Hi- I am thinking of upgrading to either one of these products as my current versions do not appear to support the panasonic raw file format rw2 but would like to know if the latest versions do support this format before I buy.

    Note that CP's correct answer implies the fact that each individual camera model must be supported by ACR.  You can't go just by the format alone.  "RW2" alone is meaningless.  Bear this in mind when you move to a newer camera.  Check the ACR compatibility list first:
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html

  • Does Adobe Premier Pro CS6 and After Effects CS6 support the graphic found in the new late 2012 27" iMac?

    Hi there guys! I´m very, very, VERY close to buy a full configuration iMac (the late 2012 27" model) but I have reed in different forums that Adobe Premier Pro CS6 and other applications from Adobe such as After Effects DO NOT support the graphic cards found in the new iMacs....
    is this true??????
    i really wouldn´t understad the logic behid the decission of picking a graphic card that is not supported by one of the leading video editing sofrware used today.... specially when this computer is suppoused to be an Editing Animal....
    I hope this rumor is not real..... then I can be just... really happy and get my new desktop computer and work, work, work, work
    thanks for your attention

    Hi there Daniel, thanks for paying attention to this subject. Today I got an answer from Larry Jordan from his blog (I believe he is one of the "videoguys" from http://videoguys.com and he said that actually adobe does not support those GPU that we will find in the new late 2012 iMacs. However it seems there is a way to make that work out.....
    here is his review on his new iMac, at the very botton you will see comments from people and his answers... one of the last coments is mine regarding this subject, this is what I asked and his answer:
    mGabo Jan 18, 2013 08:50Hi there Larry, I reed in your other post on your iMac that Adobe didn´t support the Nvidia graphic cards found in this model, I have been asking in forums about this and people say Adobe does supports them……Do you know if Adobe now works fine with these cards?
    Larry Jan 18, 2013 11:10When I contacted Adobe about this a couple months ago, just after the release of the new iMacs, I was told that Adobe did not support the graphics card at that time. There is, however, a workaround, which I’m hoping to write up this weekend.Larry
    mGabo Jan 18, 2013 12:28 oh! great Larry! please post the link of that article so I can follow that!many thanks
    here is the link of this article: http://www.larryjordan.biz/app_bin/wordpress/archives/2084/comment-page-1#commen t-7853
    so far I haven´t find anyone who can expalin to me how can I get these Nvidia GPUs working with adobe premier and aplications alike from adobe.

  • Does CUCM System version: 7.1.5.33900-10 support texting on 7925g's without middleware?

      I have been tasked with testing text messaging on the 7925g model phones and have been unsuccessful. This is a hospital environment, and will also need to able to handle nurse call notifications. Eventually                

    You will need to integrate to some 3rd party application as this is not natively supported by Cisco, there are many different ones out there.
    Chris

  • Does Oracle 11g Express Edition 11.2.0.0 support the impdp utility ?

    Hi,
    We are trying to import an Oracle dump within a Express Edition, without success. We got the error message: ORA-39213: Metadata processing is not available.
    A) Source data base: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0
    B) Target data base: Oracle Database 11g Express Edition Release 11.2.0.2.0
    Searching for solution led us to following forum entries:
    1. http://kmpdba.wordpress.com/2012/05/02/ora-39213-metadata-processing-is-not-available/ Cause: DBMS_METADATA_UTIL package does not successfully ran. Solution: to install (among others) SQL> @$ORACLE_HOME/javavm/install/initjvm.sql
    2. But: there is no @$ORACLE_HOME/javavm/install/initjvm.sql scrript -> http://www.oracle.com/us/products/database/enterprise-edition/comparisons/index.html -> Oracle 11g EX does not support java
    Questions:
    a) Does support Oracle 11g EX the impdp utility at all ?
    b) How would it be possible to import the above mentioned dump from (A) into (B) ?
    Thanks in advance,
    Michel

    Sounds like the messing xsl files issue here: Upgrade from XE10 to XE11
    Try
    execute sys.dbms_metadata_util.load_stylesheets;and see if you get the missing xsl files error.
    The XSL files are not distributed with Oracle 11g XE, but seems to be pre-loaded in the default database created by the installer. If you try to create your own database it wont have the stylesheets loaded and you'll need the xsl files to load them up.
    The quick solution will be to copy the 180 xsl files from an Oracle 11.2.0.2 Enterprise to your Oracle 11g installation ($ORACLE_HOME/rdbms/xml/xsl/) and load the stylesheets.

  • My PCI-6503 card does not get a device number

    I have a PCI-6503 I/0 card installed and it apperas corret in the Device Manager. In the MAX explorer it is identified as PXI device. But I don't get a device number for it. What can I do?

    Marcus;
    Very strange. Is the board working properly without the device number?
    You can also try to assign a device number to the board. To do that, right click at the board, and choos the Properties option. You can enter the device number there.
    Hope this helps.
    Filipe

  • Does Adobe Premiere Pro CS6 not support the Quadro K2000D GPU card?

    I can't get the Premiere Pro CS6 to recognize that Quadro K2000D is installed on my computer.  I'm running Windows 7.  I see in the list that Quatro 2000D and Quatro K2000 is listed as supported but I haven't come across Quatro K2000D.

    If your nVidia card has at least 1Gig of video ram, use the nVidia Hack http://forums.adobe.com/thread/629557 - which is a simple entry in a "supported cards" file

  • When the NI-DAQ version 6.9.4 is available?

    When the NI-DAQ version 6.9.4 is available?

    The best source of information regarding drivers is our web site. Any new driver updates will be posted at www.ni.com.

  • Does the UCS C-Series Servers supports PCI/e card digium T1/E1

    Hello,
    Does the UCS C-Series Servers supports/compatible with PCI/e card digium  TE407P/TE420 T1/E1.?
    The server will be used as Asterisk server.
    Thanks
    Philip

    Hi Philip,
    Compatibility will depend on the server model that you have and whether the digium card is a full length, low profile, or half length pcie card.  Take a look at http://www.cisco.com/en/US/products/ps10493/prod_models_comparison.html#~tab-a for details.  If there are any issues with the card itself once it is installed it will have to go through the 3rd party manufacturer.

  • I am unable to connect to the internet, there is a pop-up that says "We're sorry, but the Safari browse version you are currently using dos no support the community toolbar". My computer does say that it is connected to the internet until I open Safari.

    I am unable to connect to the interent. At the top of the screen my computer says that I am connected. When I open up Safari there is a pop up that say "Community Toolbar          We're sorry, but the Safari browser version you are currently using does not support the community toolbar" and when the Safari page opens up it says "You are not connected to the Internet. Safari can't open the page .... because your computer isn't connected to the Internet." I have tried Network Diagnostics and tried to reset Sfari, empty Cache as well as deleted all of my interent history. I am unable to use Time Machine because I never set it up. If someone knows how to help I would very much appreciate it!!

    Some instructions for removing Community Toolbar are available in this thread: https://discussions.apple.com/message/15868085#15868085

  • In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4?

    Question
    In previous versions of Firefox I was able increase the display size on Flickr which remained unless I altered it again. Does any one know how to do this on Firefox 4

    Make sure that you not run Firefox in (permanent) [[Private Browsing]] mode.
    * You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
    * To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
    * Uncheck: [ ] "Permanent Private Browsing mode"
    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • Using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    using time warner road runner. when I try to open up safari to home page I get error message that this version does not support the "community toolbar" can't proceed until closing the error message. sick of seeing it

    That toolbar/ct plugin seems to cause problems for all who install it!
    Close Safari, then locate and delete the following files and it should be gone:
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/Receipts/ctloader.pkg
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    /Users/<User name>/Library/Application Support/Conduit
    where / is the root library on your Hard Disk.
    If you are running Snow Leopard you should also look here:
    Library/launchAgents/com.conduit.loader.agent.plist
    Library/Application support/conduit plugins
    Also, as mentioned by Gilli2000:
    Library/Receipts - If you read it, it has information in it at the bottom referring extensively to "CT" and "community toolbar".
    Maybe it is harmless, but trash those items anyway!
    Note: Safari does not support any third-party toolbars except those supplied as an extension to Safari via the Extension Gallery.

  • TS3230 i get a pop-up window saying the current version of Safari does not support the community toolbar.  How do I get rid of this?

    i get a pop-up window saying the current version of Safari does not support the community toolbar.  How do I get rid of this?

    You need to uninstall the Community / Conduit toolbar add-on.
    Locate the files in bold print and move them to the Trash. The first five are in your root   /Library
    /Library/Application Support/Conduit
    /Library/InputManagers/CTLoader
    /Library/ScriptingAddtions (anything CTLoader realted)
    /Library/Receipts/<Toolbar name>.pkg
    /Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    The next one is in your Home folder.
    ~/Library/Application Support/Conduit
    When you're done, try Safari.

Maybe you are looking for

  • ITunes 11 is not playing my Playlists in the order specified; it's more random play order

    iTunes 11 is not playing my Playlists in specified order (songs 1,2,3, etc); it seems to be plaing in random order

  • Bringing Yahoo! map markers to the front

    I have a yahoo map that is loading multiple instances of "marker2.swf" onto a map, based upon their addresses.  Each marker, when rolled over, pops up a window displaying information about the location. The problem I have is that the markers get plac

  • SUS PO status

    Hi Masters. I have a question. when a PO is completely Goods receips and send all to SUS is ok.  the question is the header PO in SUS will be update to received., thanks for your help.

  • SYSDATE computation to populate a date field in a form

    Hi, I have a form to add employees. The form has a Created_On field of type date. I want this field to be automatically populated with today's date - I have created an After Header Computation of type Sql Expression on this field with SYSDATE as the

  • Differentiation Attachment - Multiple Attachment Columns?

    In a list I have, users need to be able to upload documents.  On each item, they will attach several documents.  There are 3 types of documents they can attach.  What I want to accomplish is a way to easily differentiation what kind of document each