Does NI PXI-6259 support both Traditional DAQ and NI-DAQmx of Labview 7.0 Express?

I need to buy a Multifunction DAQ board which will be supported by both the Traditional and NI-DAQmx of Labview 7.0. Is the NI PXI-6259 appropriate for such application?
Thank you.
Ujwal

M-series boards are not supported by Traditional NI-DAQ. Stick with the E-series if you require Traditional support.
John Weeks
WaveMetrics, Inc.
Phone (503) 620-3001
Fax (503) 620-6754
www.wavemetrics.com

Similar Messages

I am using several Macs running Yosemite. I was recently "upgraded" to Xfinity's new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for

I am using several Macs running Yosemite. I was recently “upgraded” to Xfinity’s new cable modem which can support both 2.5Ghz and 5Ghz networks at the same time. Actually I can connect to the internet over both with a satisfactory bump in speed for the Ghz. However when I connect to the 5Ghz the Time capsule disappears from the Airport Utility and claims to be Not Found. Is there something I have done wrong or just a Yosemite Teething Problem

First restart your mac and try again.
It could be
that the router and the TC are interfering wirelessly with each other.
You can check this by pressing the option key while clicking on the wireless icon on your screen
Open Wireless Diagnostics
enter your user password
Press CMD 4 then Scan
You will see all the wireless channels being used in your location and you can check if they are on the same channel
Make the SSID for the TC simple like MyTC
Set 5Ghz to auto
Update the TC
Try again
Ted

Need help in converting Traditional DAQ subvis to DAQmx configuration

i need to convert these vis (of traditional NI DAQ) to be used with a new DAQ card that supports only NI DAQmx.
please help me in this..
Can i use the same traditional NI DAQ VIs with NI PCI 6221?? if so how can I? does this device can be configured for traditional NI DAQ???
Kudos always welcome for helpful posts
Solved!
Go to Solution.
Attachments:
traditional ni daq vis to daqmx.jpg ‏1857 KB

NI has several resources to help move from tradtional DAQ to DAQmx. A good place to begin is the Getting Started page. There is a tutorial on how to transition. There is also the compatability VIs that replace certain traditional DAQ functions with wrappers around DAQmx functions. The DAQ example you posted is pretty trivial and really should not take much time to convert once you get a basic understanding of DAQmx.

Can a single Access Point support both bridge mode and Access Point mode at the same time

Hi Guys
Does anyone know which access point can work in both bridge mode and AP mode ?
Cheers

Well what are you trying to cover. If its really a large outdoor area, then look at the mesh AP. Those require a WLC. Autonomous or stand alone ap can perform bridging on one radio and client access on another. You can also look at AP that support indoor mesh that also controlled by a wlc. If your putting APs outdoors, then look at the outdoor mesh.
Thanks,
Scott Fella
Sent from my iPhone

Traditional DAQ and SCXI 1530 model name

Hi all,
I am using Labview 6.1 and Traditional DAQ 7.1. I am working on one system with one DAQ card (PCI 6052E) and several SCXI cards(1520, 1530). All the SCXI cards are installed correctly because MAX can detect them all.
I want to make a program with Traditional DAQ which can detect all the SCXI cards and show their model names on the front panel.
I found in Tradtional DAQ, there is one VI called "Get SCXI Information" which returns the model types of SCXI cards, something like, 50, 51....
I found in the help file of "Get SCXI Information" VI there is some kind of the configuration file saying 51 stands for SCXI 1520. What does 50 stand for? Where can I find the complete configuration file or somehow can I change it? Like make 51 stands for something else...
Any ideas are highly appreciated.... Thank you all!
Solved!
Go to Solution.

This is a duplicate of the last post in this thread: http://forums.ni.com/ni/board/message?board.id=250&thread.id=53087
Brad Keryan
NI R&D

Change traditional DAQ code to DAQmx code

Dear sir/madam,
I am in trouble.
This code is written using traditional DAQ but I want to chane DAQmx version.
I do not know how to code using DAQmx because traditional DAQ is very different for DAQmx.
Especially, ' AO clock config.vi' of traditional DAQ is what does this fuction.
I can not know how to change it.
Please advice.
Bill,
Attachments:
version.vi ‏21 KB

Look at Transition from Traditional NI-DAQ to NI-DAQmx in LabVIEW

Does the video adapter output both S-Video and Composite simultaneously?

I have a multi-zone receiver which converts S-Video to component for the main zone and passes S-Video signals through to zone 2 but does not convert them to composite which is how that zone is set up. I solved a similar problem with my DVD player by connecting both the component output and composite output of the DVD player to the receiver allowing high quality viewing in the lounge room and passable viewing in the bedroom.
I realise the quality from the adapter is questionable particularly for composite but I'm still interested if both S-Video and composite signals are output from the MBP 17" via the adapter simultanesouly.
Thanks,
Max.

I have a follow-up question which may help answer the original question. Does the MBP have to detect the external display when connected via S-Video/Composite in the same way that it has to when connected via DVI? My Dell notebook had so much trouble detecting composite and S-Video connections that eventually I gave up so I'm a little "once bitten twice shy" on this. If the MBP doesn't attempt to detect the external display via S-Video or composite then it must output both S-Video and Composite signals continuously (which would be great).
Thanks,
Max.

Need all drivers supporting both 32 bit and 64 bit

hai this is chaitanya.. unfortunately i formatted my laptop. so i need drivers supporting both 32bit and 64 bit for windows 7

Are the drivers for the same model that Paul gave drivers for in Nov?
http://h30434.www3.hp.com/t5/Wireless-Internet-Home-Networking/need-graphic-Card-driver-and-WLAN-dri...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Trying to create an abstract service that supports both DataService(LCDS) and RemoteObject

I am trying to create a generic service processor in ActionScript that would be able to use a DataService(from LCDS) or a RemoteObject, depending on a property setting. The intent is to be able to change a setting during installation to control whether DataServices would be used, or RemoteObjects. I understand that the server side logic would need to be written differently for each of the implementations.
The challenge is that accessing a DataService is synchronous, but a RemoteObject access is asynchronous.
For the synchronous access, I can just call a service and return the result directly to an object which can be passed back to the client.
For the asynchronous support, extra code must be written on the client side to listen for the return of a requested result (for example, the results of a database quesy). This code must be placed outside of the service itself, thus making the generic service non-generic.
Are there any examples available that accomplish what I am trying to do?

Hi. As far as I know both DataService and RemoteObject are asynchronous APIs. If you call a DataService method such as fill() or call a method on your RemoteObject, code in your Flex application will continue to execute and the result from the RemoteObject or DataService request will be received asynchrounously. I don't believe there is any way currently to make synchronous or blocking calls in Flex because of the Flash Player's execution model.
How are you planning on using the DataService and RemoteObject in your application? Is it to do something like populate a DataGrid? Do you plan on updating the data retrieved from the DataService or RemoteObject such as adding, updating or deleting records?
The DataService API is much more powerful than the RemoteObject API, in that if you bind an ArrayCollection that is populated from a DataService to your DataGrid, when you update data in the DataGrid, the data on the server is updated and all other clients that have the same view of the data will also get the updates. You don't currently get this functionality with RemoteObjects.
My point here is that if you wanted to write an abstract service that supports both DataService and RemoteObject and you need to be able to add, update or delete records you are going to need to write a lot of custom code to listen for collection change events when data on the client is modified and translate these change events into RemoteObject requests. Even if you did do that, other clients would not get these updates.
If all you want to do is something simple like populate a DataGrid with data from the DataService or RemoteObject, then sure, writing an abstraction layer on the client that supports both of these wouldn't be hard.
-Alex

Does unlocked iPhone 6 support both GSM and CDMA?

If I buy an iPhone 6 at the Apple store with the unlocked T-Mobile set-up, can I activate it on a GSM carrier and later switch to a CDMA carrier?

No.

Does NI PXIe-5622 support AM demodulation for the Bandpass path?

I want to use this module to build a us and ns spectroscopy. If I modulate my signal using a AOM ( Acousto Optic Modulation) device, is it possible to demodulate the receiving signal with this module?
Thanks,
Uyen

Hi Uyen,
The 5622 has limited onboard signal processing that it can do. AM demodulation is one function that it can do. Below is a section from the NI High-Speed Digitizers Help that explains how to perform this function:
Let me know if that did not fully answer your question, I'd be happy to help.
Sarah Y
SDR Product Manager
National Instruments | Ettus Research

PXI-6534 Card using Traditional Legacy Card to DAQmx driver

I don't know where to start..I am stuck on an issue that needs to be solved.
I am using a Traditional legacy driver on a PXI-6534 Card.
I want to move it to using the DAQmx driver.
Can someone point me to the right direction?
Thank you..
Best regards,
Krispiekream

i read over the link you provided and i can see that changing it will take a while.
some of the examples given didn't cover all the questions i have.
can you see my vi and see how would i change that to daqmx?
Message Edited by krispiekream on 02-24-2009 03:34 PM
Best regards,
Krispiekream
Attachments:
Traditional to DAQmx.vi ‏31 KB
untitled.PNG ‏8 KB

Three tier PKI - support both SHA-1 and SHA-2

Hey guys,
We're about to implement a new three tier PKI - root, intermediate and Issuing CA's... is it possible to have the root and intermediate configured as SHA-1, and have multiple Issuing CA's - some SHA-1 and some SHA-2, or do the SHA-2 Issuing CA's need to
be signed by SHA-2 certificate chain?
Thanks in advance

I agree with Vadims - if you can start from scratch now I would recommend setting up different hierarchies with consistent algorithms.
The mixed scenario you propose would be sort of trade-off for existing PKIs - I had related discussions with some clients of mine:
If you have to meet SHA-2 as per compliance / security guidelines but your Root CA processes are complicated, expensive, you use HSMs at the Root level (but there is no budget / time to install another one) etc., then adding a SHA-2-capable issuing CA to
an existing hierarchy is a first step and might meet your different requirements.
Then you can start moving over all existing templates (and related apps.) to the new CA. If you are 100% sure that all your apps would support SHA-2 you could probably "upgrade" the Root CA by renewing it with a modified hash algorithm.
But you never know if you will have to support another PKI-enabled application or device in the future (some embedded system for example) that does not understand SHA-2 so you might want to keep the alternative SHA-1 hierarchy.

When does SC VMM will support vCenter 5.5 and ESXi 5.5?

Hi, as the next System Center should be released in 2016 instead of 2015, is Microsoft plan to push an update to fully support vCenter 5.5? This is a real bad situation as most of VMWare customer
are moving or already moved to vCenter 5.5.....
Steeve Roy

Hi Sir,
I apologise for the inconvenience this may cause .
What I can only get from the article which Updated at March 6, 2015 is it still doesn't suppport Vcenter 5.5 :
https://technet.microsoft.com/en-us/library/dn771747.aspx
We will keep eyes on this if there is any update.
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Up/down count edges: traditional daq vs daqmx

Hello,
I've inherited a program that uses an encoder to read the position of a torque-arm. The program uses traditional daq. The encoder position data is read using "Counter Read Buffer.vi". Then, by simply casting the output of "Counter Read Buffer.vi" to an I32, the position data can be either positive or negative.
1. Is this a valid method of using "Counter Read Buffer.vi"? (I wonder because if I capture data as I move the torque arm back and forth, the data suggests that the encoder is not moving back to zero counts each time. For example, the first time the arm is moved through its range, it might go from 0 counts to 100 counts; the second run may be from 10 counts to 110 counts, the third from 15 to 115 and so on).
2. Is something this simple available in DAQmx too, or do I have to monitor each encoder point that I read to detect when the counter rolls over and handle it manually?
Thanks in advance for any assistance!
Chris

Hello Chris,
For the answer to your first question, this may be an issue with the DAQ device you are using. What exact device are you using?
For the second part, the Measure Angular Position VI, found in the Example Finder under Hardware Input and Output»DAQmx»Counter Measurements»Position, is a good quadrature encoder VI for reading angular position.
Try using this example and see if the behavior is different between the Traditional DAQ and NI-DAQmx code and let me know how it goes.
Regards,
Dan King

Does NI PXI-6259 support both Traditional DAQ and NI-DAQmx of Labview 7.0 Express?

Similar Messages

Maybe you are looking for