Does not allow to set time characteristics while performing Partition
I had loaded the monthly inventory cube without setting any partition.
Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?
Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
But you are trying to partition the cube which already has data so...You choose Repartitioning...
Repartitioning can be useful if you have already loaded data to your InfoCube, and:
● You did not partition the InfoCube when you created it.
● You loaded more data into your InfoCube than you had planned when you partitioned it.
● You did not choose a long enough period of time for partitioning.
● Some partitions contain no data or little data due to data archiving over a period of time.
Let me know if you need help with the steps to perform repartitioning
Similar Messages
-
TS1347 Calendar does not allow for setting up appointments
I can't get my calendar to open and add appointments? I need this as o have a hectic schedule. Any ideas as what happened or how to
Fix this?
Thanks in advance!You mean the Calendar app will not open? Try restarting or resetting your device.
http://support.apple.com/kb/ht1430 -
With 10.7.2 update iCal does not allow you to set "Reminders" by draging events from "All Day Events" into "Reminders" is there another way to do this instead of having to type out the entire reminder with date, time, and type?
With Lion 10.7.1. you where able to drag events from "All Day Events" into the "Reminders" bar to create upcoming reminders.Exactly the same question I was about to post!
Great being able to sync reminders (well overdue) however if I have to re-type a calener envent into reminders it's a waste of time!!
Come on Apple!!
Just need an option for the calender event to add to reminder or the old drag to add to reminder functionality back, Please??? -
System setting does not allow changes to be made to object LSYS
Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammedDear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding -
I've rentented a movie and would like to watch it. Consistently I receive the message "an error occured loading this contnt ...try again later". I've tried over a long period several times but always receive the same message. Also, I tried to re-purchase the movie but the system does not allow this. It just confirms "you have already rented this movie". any suggestions. Can't I just cancel the rental since I have not even fully streamed the movie/
Likely network related
What is your current connection, use speedtest
Go to istumbler or netstumbler to get a report of the network, look for signal strength and noise
If on wifi try Ethernet
Make sure DNS is set to automatic (settings - general - network) -
Successfully set up TC (the latest one) for MBP. I can access to TC wirelessly. Tried to access from my PC too but PC does not even detect TC (as storage), while PC is connected in the same network and can access to the internet. Anything missed?
Load the airport utility for windows.. it has several parts.. the key one is bonjour for windows which helps windows find apple network devices.
The TC should also be setup with names that windows can use.. ie short, no spaces and pure alphanumeric.
So Fred Blog's Airport Time Capsule
Is not a valid windows name.
TCgen5 is. -
JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you )JAN 4, 2012
As of the Upgrade to Lion,. 2007 I-Mac - the Email portion, .. DOES NOT allow a Video Clips to be sent via the Email
as the I-Photo is not supported by Video Clips ( Previous Leopard )
No problem clip and drag via Quick Time Pro to the email and select the Attchment size to send. . Depending on the
Size of the Video Clip .. Now Lion only Export's 1 size, . only and as a result . . teh File is TOO Large and
Will NOT send via E-Mail ???
Between the Issue of the Lion, and Email issues , and the Upgrade of I-Touch to 5.1 from 4.2.1
as my Photo Size is Huge .. 70,000 + photos in the Computer. . and was 40,000 in the I - Touch .. .
The New I-Touch too will not Load the same as Previously used on either my 16 GB or 32 GB Unit . .
No Help . .. so far, .. as a Apple user since 1996 .. I have Never experieanced such frustration ???
( any one have some help if similar experiances ? thank you ) -
I set up my work e-mail account on my iphone 4S. When I try to send an e-mail message from my phone, an error message occurs "Cannot Send Mail" - "recipient was rejected by the server because it does not allow relaying". What does this mean and how do I correct it?
Get the correct mail server settings from your IT department.
-
My email is not working properly, I can receive emails but I cannot send them. Every time I try to send an email an error message appear saying "The recipient was rejected by the server because it does not allow relaying". There used to be no problem with my email it has only come up recently. Also, my Internet works fine. I have tryed restoring my iPad to factory settings but it still doesn't work. Does anyone know how to fix it?
try to check the email id of the guy you are trying to send the email to as i had the same problem i had written yahoo.com when it was yahoo.in
-
System setting does not allow changes to be made to object
Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes -
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30
hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS 640 0009
SAP_ABA 640 0009
ST-PI 2005_1_640 0000
PI_BASIS 2004_1_640 0006
SAP_BW 350 0009
BI_CONT 353 0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
YogeshHello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace: /1SEM/
Namespace role C
Repair License
SSCR Popup X
SAP Standard X
Gen Objs Only X
Regards,
Gregor -
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
System setting does not allow... With implementing a SAPNOTE
Hi all,
I try to implement a manual activity of a SAPNOTE.
But, when I want to modify a Source Program with SE38, I obtain the error :
System setting does not allowe changes to be made to
object PROG RFUMSV25
The properties of client is which is open to modify of customizing from SCC4.
thank a lot
DavideYes ther is:
KE1K919403 BRUNODAVI2 Note Assistant - Nota n° 1150463
|
KE1K919404 BRUNODAVI2 Repair
- Documentation
- Single Message
- Report Source Code
- Report Texts
|----- RFUMSV25
and this cr is transported into quality..! -
I WANT TO PURCHASE NFS MOST WANTED GAME FROM APP STORE BUT IT DOESN'T ALLOW ME TO PROCEED FURTHER
after trying many times with two different debit cards still does not allows me to buy a game from the app store gives error "YOUR PAYMENT METHOD WAS DECLINE.PLEASE ENTER VALID PAYMENT METHOD INFORMATION" Please help me outIn most cases, you can't use a Debit card anymore. So, either redeem an iTunes gift card or use a credit card.
-
Everytime I open my setting, safari or any app that needs the internet my ipad blinks out and does not allow me access.
1. Double-click the Home button to reveal the Task Bar
2. Hold the Safari app down for a second or two until you see the minus sign
3. Tap the minus sign to close Safari
4. Re-launch and test Safari
Maybe you are looking for
-
I understand this can be done in some previous generations, and am just not sure whether it works in my situation. I have a MacBook Pro (2009) and a brand new iMac 27" (2011). It seems that MBP has a mini displayport and iMac has 2 thunderbolt ports.
-
i have spoken with support twice i think, i am having to reinstall windows 7 and have no idea how it got than way. When i go to install the windows everything is fine until i get to where it is installing files and there is 4 different sections and t
-
How much space does iOS 6 or iOS 7 require?
On a 8 GB iphone how much space does iOS 6 or iOS 7 take up?
-
How to change sip address after changing email address for bulk users
We are in the process of adding new primary email address as [email protected] for 500 users. current primary email address is [email protected] and currently all LYNC users has sip address as [email protected] Now we need to change the LYNC SIP Ad
-
No Response from macbook- is it dead?
I have talked to many people and read a lot online, but nothing's worked yet. My 15" Macbook's battery only would last about 15 min, and if left in sleep mode for long enough the battery would run out and the computer would power down. Usually, if th