Does not appear possible to use date formatting in interactive reports

I've an interactive report displaying a column of data type = date. When populated with the result of "select (sysdate) from dual;", regardless of what data type conversion (to_char/to_date) or what time formatting is used (attempting DD-MON-YYYY HH:MIPM), the displayed time is always 12:00AM.
Thanks!
Paul

Can you post a small example of what you are trying to do on the hosted instance of APEX from Oracle? You are trying to get the following:
SELECT TO_CHAR(SYSDATE,'DD-MON-YYYY HH:MI PM') test_col FROM DUAL to format properly?
It returns: 18-NOV-2010 09:51 PM in a one column report for me..
Thank you,
Tony Miller
Webster, TX
You can get more with a kind word and a two-by-four than you can with just a kind word
Anla-shok Marcus from Babylon 5

Similar Messages

HT201272 I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

I need to reload some songs as the backup did not include all. Following this article. Problem is that download icon does not appear anywhere. Using iTunes 11.01. Anybody seen this before?

Steve!
There is a lot more "meat" in this .
I purchased all out of Denmark. My HD crashed and I reload it all. While doing this I had to install new iTunes, - this is the newest version 10.xx. The old version was probbaly 9.xx (cant remember). So the library files are from an old version, - but it does not look like creating a problem. I am now in Sweden, so iTunes was installed in Sweden, and I try to re-download my missing songs while being here in Sweden. However, - I belive I am connected to iTunes store in Denmark. ... (it takes 2 smileys for this, - if you get as far as to here and still have an overview.)

Application Date Format in Interactive Reports

Hi,
What should we define in Number/Date Format in interactive reports column attributes such that it will use application level date format?
Thanks

Hi,
You do not need define anything , then it use application date format
Br,Jari

Depreciation area set in Asset Class does not appear in asset master data

Depreciation area does not appear in the asset master data however it is set in the Asset class. If other asset is created in the same Asset class that depreciation area is automatically set in the asset master (it proofs that it is not a problem with Asset class).
I tried to set that deprecition area directly in the asset master data but all the fields are blocked for changing (is it possible to change that?).
What should I do as I need to post on that area ?
Thank you,
Jean

Ok Zaid! thanks,
But what treatment should I give to that asset? Because now it is not being evaluated in that area but we need to do it.
The asset was created in the prior exercise (year).
Regards,
Jean

IPad Air does not appear online when using "Find my Phone"

Curious why my iPad Air appears "offline" in the Find my Phone app when it is in sleep mode. All of my other devices (iPhone 5 & iPhone 4) both appear online (and on the map) even though they are sleeping.
All devices are running ios7 and are connected to the same wifi network.

Hey there MntnBikeCT,
It sounds like you have the iPad Air setup with Find my iPhone but you are not able to locate with the app on a different device, but other devices work just fine. I suggest these steps from the article named:
iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
http://support.apple.com/kb/TS4006
"No location available," "Offline," or "Location Services Off" alerts
This can occur if:
The date on your device is incorrect. Choose Settings > General > Date & Time to check and set the date.
Your iOS device is currently off or not connected to a data network (Edge, 3 or 4G, or Wi-Fi). Wait a few minutes and try again.
Your iPad (Wi-Fi only), iPod Touch, or Mac is currently off or not connected to a Wi-Fi network.
Location Services is not enabled on your iPhone, iPad, or iPod Touch (Settings > Privacy) or on your Mac (Date & Time) preferences. Learn more about Location Services on your Mac:
OS X Mountain Lion or later
OS X Lion
You are located in a country where Apple does not offer this feature. This feature may not be available in all countries due to technical limitations or local law.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Automator does not find items accurately using date stamps

Greetings
I am trying to write a simple workflow using Automator. Just check the creation/modification date of some files, and then do some work with them.
It does not do the job right.
If I ask for the files created or modified today, it finds well the files it has to find.
But if I ask automator to find files created or modified last n days or weeks, it fails to select the proper files.
Even worse, if I order it to select files, say, modified before july AND after august, it select files, when it's impossible a file can be last modified, created or whatever according that clausule.
My system is an iMac bought on summer of 2011, with Mountain Lion 10,8,1 (I'll upgrade next week, after backing up all my stuff) and catalan language. I am stating that last bit because I wonder if there's an issue with the day/month/year date format we use around here, instead of month/day/year
TIA

What was your solution? I'd would love to know how to get Pages to work with Automator. What I want to do is import Word (doc)s to Pages and then export out to (pdf)s.

GPS does not appear to work with data-roaming off and no wi-fi network

I have been using an application called imarkmyspot to produce way-points for synchronising with my camera. When I am in my home country this works fine and a GPS location is found quickly.
I've recently been abroad and had data-roaming turned off to avoid high expense. The point is that in this situation the GPS does not work (with imarkmyspot or Goggle Maps) unless I can access an open wi-fi network.
So my question is, is this correct? Does GPS only work with either data access on or when within range of an open wi-fi network.
If this is feature (bug) of the iPhone then this makes applications such as imarkmyspot rather useless when travelling. Alternatively it could be imarkmyspot that has this problem of course. But I'm quite sure Google Maps did not work either in this situation either.

The iPhone's GPS does work without a data connection.
Two weeks ago on a work-related trip I knew I'd be traveling a rural highway that would leave me without data/voice from any source for at least 45 minutes (no GSM service). Before leaving a city with data, I zoomed out using Google Maps far enough to show most of my route, then "nudged" the map so the application wouldn't try to get a data update for the map. I simply used the top power button to turn on and off the screen. The iPhone and GMaps tracked me through for the entire blacked-out section of my trip - I made sure the device had a decent view of the sky and it got a fix and nailed the location within a few seconds.
Ironically, I'm returning that device in the next few hours for an exchange. The GPS hardware, it seems, has failed about a week ago - the device gets A-GPS fixes now (it shows the nearby 3G and EDGE towers), but won't lock in for more than a second or two. My iPhone's GPS worked, and now it doesn't - AppleCare told me my GPS hardware has failed - and you're may be exhibiting the same failure.
Some A-GPS devices use their sources to get close by - like my TomTom GO and the ephemeris files it grabs from their servers to get updates on where satellite locations are - and then use the on-board chip to nail the device's position. From what I understand of the iPhone's assistance mechanism, the data tower's and Wi-Fi physical location needs to be correct and available in an accessible database somewhere - my iPhone was showing me near Houston TX (2200 mi/3500 km distant from my actual location) when using 3G data until the data source was updated.

Youtube's video layout does not appear properly when using Firefox.

[http://img.photobucket.com/albums/v344/Hoofbeats/Picture1-2-1-1.png]
This is what Youtube videos look like when I watch them; the option buttons normally under the video are now hidden by the video. They are still clickable, but pretty much unviewable. This only appears when I'm using Firefox.
I'm on Firefox 3.6.12, and on Mac 10.5.8. My plugins for flash and such are all up to date, and I disabled any add-ons relating to Youtube to see if they were effecting it. No results.

this is caused by kwiclick. disable that addon and it's fixed.
kwiclick adds the little icons on top of the video that pushes it down, covering the lower buttons and viewcount. you can see the icons in OPs picture.

It does not appear possible to either open all of the (or selected) links on a page in tabs nor print all of the pages in tabs (like a book).

In applications that use a browser control or open web pages, there are frequently (nearly always) mechanisms to open multiple links on a page in tabs, print all (or selected) tabs, or print all linked pages (the latter is pretty much universal as an OS call). Additionally, like Links (in IE) or Bookmarks (in Mozilla) can be 'named', so can 'tabs'. Some editors (and applications) permit tabs to be 'named'. As I recall, in an editing mode, Netscape used to do this, just like you could edit a page. For authors and researchers, this would be invaluable primarily because neither are frequented by earnings capable of affording those spendy apps like Adobe or Corel that do that, because programmatically it is reasonably simple to maintain an association of symbolic links, and that Mozilla could immediately become the browser of choice as IE can do nothing of the sort (well, may be new IE can).
ps. If you would like to see the seven pages of remarks that follow that period after the paren, email me an answer to my 'question'. Incidentally, if you might find this impudent, before you say that to anybody, discover me, who patented 1,821:1 data compression, before you get too far down that path. 2012 is going to be a new world in technology, I promise.

Flash Player is a browser add-on, not an executable program.
If you need to open a local SWF file you will need the standalone player (Projector) from http://www.adobe.com/support/flashplayer/downloads.html
Note that the download is the player, not an installer, so you will need to make the file association manually.

Field Headinds for some Z fields does not appear in SE16n

For some custom defined fields, headings does not appear if we use transaction SE16n. But that appears if SE16.
Please reply if you got similar issue.
Thanks
Manish

Hello Manish,
This is because all the the custom fields those are not created with reference to a data element won't display the filed names in Se16n.
So if you want you can make your custom field of the append structue to refer a data element.
Thanks,
Greetson

Postings on profit center but does not appear in the profit center report

Hi all!
I have a very strange problem. My customer is using cost of sales accounting. When I reconcile the cost of sales accounting profit and loss report with a profit center or cost center report I found that for a certain month there is a few descrepancies. I found that for a certain functional area I had postings on a specific account (account 451240 loss price differences) on functional area and both on cost center and profit center but these postings does not appear in the profit center or cost center reports. When I look at the postings in fbl3n or fs10n I can see that they are assigned to both cost centers and profit centers. How is this possible? How can a posting be made to a cost center or profit center but not appear in the corresponding reports?
Many thanks for help in advance,
Åsa

Problem solved

Ios6 - wifi log in does not appear for secured network

Hi,
I installed ios6 on my ipad2 last night.
Today - when I connect to a secure wifi network via settings, the log in screen does not appear, like it used to do automatically.
Is this an issues with the OS? Can anyone suggest a fix or a solution?
Thanks in advance

I still haven't resolved this. At present, the wifi is visible - but the log on screen does not pop-up, so I am unable to log on.
Anyone have any fixes/solutions?
Thanks

Settings iCloud Photos does not appear on my iPhone with iOS8

I have created some shared iCloud photo streams using iPhoto. I used to be able to access the stream and update it using my iPhone 4S on iOS 7. Since upgrading to iOS 8, the streams no longer appear.
When I go to Settings > iCloud (as instructed by Apple's trouble shooting guide), the Photos option does not appear as it used to in iOS 7.
I've tried to logout of iCloud and re-login and this has not resolved the issue. Any help would be appreciated!

It is likely on another page, in a folder, or you have restrictions set. Check all of these.
If you do not find it, then reset the homescreen layout ( covered in the manual).

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

My Mum( a pensioner) is wanting to purchase both an iPhone and iPad. What is the best way for her to manage her data /calls/txt etc. obviously the cost needs to be as low as possible. Currently does not have WiFi but uses dongle

HT201406 1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc..

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

1st. Gen iPad question: the touch keyboard does not appear when attempting to input data into data fields - this happens while using all apps, ex. Notes, Google, Pages, etc.. The cursor prompt is present. Tapping screen just brings up the option to: "Select Select All Paste." I have rebbooted with no change.
Message was edited by: Jimfromutah
The problem was my connected bluetooth keyboard.

Does not appear possible to use date formatting in interactive reports

Similar Messages

Maybe you are looking for