Does not log and transfer

Hi,
I'm using MacBook Pro, FCE, Canon HF10 and a QWC external as scratch disk. When I select video clips under Log and Transfer and add them to queue, there is a red exclamation mark under "status" and I cannot transfer them. I deleted the FCE preferences and cache, which did not solve my problem. Any suggestions?
Thanks

I spotted another comment on the forum with regards to transfer and log where the user was having a problem. They commented that they worked around the issue by selecting the clip in transfer and log and then set the In and Out times on the preview to the right and then selected the Add Clip to Queue.
I just tried this on all the video that would not transfer and it worked. By cutting down each video to segments of 5 mins I was able to transfer all the video from my HG10.
Hope that helps.

Similar Messages

Spanned Clip will not log and transfer

The editor:
Mac Pro 10.4.11
FCP 6.0.2.
Quicktime Version 7.4.1 (14)
30 minutes of video shot to a P2 card on an HVX200 is unable to log and transfer. Plays fine in the browser and on camera.
Workflow tried:
Write protect P2 and connect HVX200 to Mac via firewire.
Set scratch disk, then log and transfer (clip says spanned).
Error (red caution sign, tried retry, same error).
Tried P2CMS to ingest footage on a firewire drive, then log and transfer, same error.
Any suggestions?
Message was edited by: bpistone

One word for ya: Raylight.
I had the same problem. I tried P2CMS, renaming, and any trick I could think of. Raylight to the rescue. It creates a "pointer" MOV file to the actual P2 media and then you simply import the Raylighted MOV files into FCP. No data loss, and way quicker than a P2 transfer.
Well worth the money.
http://www.dvfilm.com/raylight/
Cheers.

Log And Transfer Tutorial

I see info in the manual for Log and Capture but not Log and Transfer. Does anyone know where I can find a basic walkthrough of that?
Thanks
Robert

Robert,
Connect the device storing your P2 content to your machine through Firewire.
Open FCP>Go to main menu> Final cut pro>Easy setup> format:Panasonic DVCPRO HD> Use (choose as appropriate).
Open new project.
Create a bin>name it as appropriate>control click it and choose set logging bin.
Now go to main menu>file>Log&transfer.
Your P2 content should automatically appear on the Log&transfer window
you can either change the file's name now or do that after transfer.
Select the files you want to transfer and drag the selected files onto the "Add selection to Queue" button or directly onto the space below.
Transfer starts and you can see 1 by 1 your media transferring onto your logging bin in the browser.
g

Canon HF20 - Issue w/ Log and Transfer in FCE

I just bought Final Cut Express 4, How do you know if you have the most up to date version? How do you upgrade?
The Video shows up, but it WILL NOT "log and transfer" I have tried to drag it down and drop it in and it acts like it will process it, but it will say 1 Clip Queued - Idle, The status then shows up as a Red Octagon with an exclamation mark.
I will do anything for answers,
the only way I can get video into fce so far is by uploading it to imovie then importing it in...
ANY Help- PLEASE!!!

Perian = I do not have that downloaded. Should I?
The only way I could get video into FCE is through importing it in. When the video plays in the canvas, the video is huge and I only get a portion of the screen....It looks really zoomed in. I'll gladly paypal you anything if you can help me through these beginer issues.

Log and transfer does not recognize footage. Please Help

When i open the log and transfer window in FCP on my macbook it no longer recognizes the files from the Contents folder of a P2 card or the RED ONE files from the folder on my hard drive. last week however, everything was working fine.
does this have something to do with the project settings or the RED plugins? any help is greatly appreciated. thanks.

Have you changed your set up or software, or computer in any manner since last week?
And did you trash your preferences and try that?

Device not working with Log and Transfer in FCP

I am trying to get some footage off my camera into final cut pro, but Final Cut Pro does not recognise my device when I try to use Log & Transfer
The camera is question is a Cannon Legria FS20, here is a link
http://www.canon.co.uk/ForHome/Product_Finder/Camcorders/flash_memory/LEGRIAFS20/
I have looked around but can't seem to find any plug-ins to get it to work with Final Cut Pro, does anyone know any way I can get it to work with Log and Transfer
Upon inspecting the hard drive, it saves video files in .MOD format with an .MOI file (which i assume is a metadata file
How can I get it so that my device works with log and transfer?
Thanks

Hi -
I did a little Google searching for information on your camera and it appears that it is a Standard Definition Camera that records in the MPEG-2 format.
Log and Transfer only works with High Definition material.
You will need to convert your video clips into a format that will work with FCP.
I know nothing about working in PAL, but you want to download an free application called MPEG Streamclip from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
This application will convert your MPEG-2 files into a format that you can use directly in FCP.
Once you have converted the files to Apple DV-PAL, with the correct frame rate (25fps?) and field dominance you can either simply drag the converted files into FCP or import them using File > Import.
Hope this helps.
MtD

Canon HF11 not showing up in log and transfer window

I am using FC Studio 6.0.6 and a Canon HD USB camera. The camera does not show up in the log and transfer window. It shows up on the desktop, works with iMovie '09 but not FCP. If I try to select files from the camera they are greyed out. Strange thing is is that it works fine on my iMac just not my MBP. I have trashed the FCP and Quicktime preferences but this did not help. HELP please.

I also am wondering what you mean by "file structure"? Do you mean the AVCHD files or something in FCP?
If you look for a particular file on a drive, there's a file structure or "path" to get to it. For instance;
Macintosh HD > Users > Nick > Documents > FCP > Projects > My latest project.
If I don't follow that path, I won't get to the file I am looking for.
Similarly, Final Cut Pro is expecting to see a certain path to the actual video files on your camera's Flash drive. If a folder name along the way is missing or had it's name changed, the path is no longer valid.

Import or log and transfer? does it matter?

I am a handful of .mov's I'm using for a project and usually I just left click and import the folder full of .mov's. Does that have drawbacks? Or should I log and transfer?
or does it matter?

Without knowing more about your setup it's hard to say. It might matter. But maybe not. But we can't tell you more - until you tell us more.
See, when you refer to files simply as ".mov's" that doesn't tell us much. That just means that QT is going to want to play them back. But it says nothing of the real codec behind the movies. Meaning, the movies could be DVCPro, DVPro HD, DV, AVCHD, ProRes, AVI's, H.264, mp4...the list goes on and on.
So FCP is tuned to work with some of these codecs better than others. Telling us more about what going on "under the hood" with those .mov's will help us to guide you better.

Log and Transfer not working with Sony AVCHD camera

Hi, I have a new Sony AVCHD camera. The HDR-XR200 120GB hard drive model. It captures in 1920x1080i, and connects to Mac via USB.
FCP does not recognize the camera when I open the log and transfer window.
Can someone help me with seq setting and easy set up setting or other setting for it to work.
I am happy to import footage into FCP with AIC or prores 422. Just want to edit all the footage I have of my so's international soccer tournament held in Australia last week. I also have Final Cut Express on my Mac if that works better. This is very frustrating trying to get it to work.
Cheers
Bryan

I use a Panasonic AVCHD, which FCP doesn't recognise. Anyway I've spent months playing around because this little camera blows my Sony V1 out of the water in sheer quality.
Best thing is just get hold of a copy of Toast 10, you can then simply drag your .mts files into this and encode to whatever you want, I edit in pro res LT, but Toast will even encode it to HDV if you want to end up on tape(Even this result still blows the Sony HDV apart)
FCP is very fussy about even noticing the very existance of .mts files, so I wouldn't waste my time, scratching my head.
By the way, I use Firewire 800 drives, not USB 2 and also in the name of God BACK UP YOUR MTS FILES ON A NEW HARD DISC CALLED "BACKUP OF .MTS FILES!" LOL

Why does Final Cut Express 4 quit automatically when I open Log and Transfer window?

I'm using a Sony NXCAM and I am editing on a Mac OS X. The clips I have recorded are in MTS format so I understand I must use the Log and Transfer setting to import my clips. I plug the camera into my computer, go into Final Cut Express 4, turn the camera on, and then go into the Log and Transfer window. Once I open that, Final Cut quits and an error message pops up that reads, "Final Cut Express quit unexpectedly." Final Cut quits too fast for me to even click on anything in the Log and Transfer window. I really don't understand why it does this. The only thing I can think of why Final Cut is quitting is because I have over 100 clips on the camera, so maybe that is too much for Final Cut Express 4 to handle. However, I wouldn't think that would be the case. If anyone knows of anything I could do to fix this problem, then please send me a reply. I've looked around the internet to see if anyone else has had this problem, but I haven't found anything. Thank you, any responses will be greatly appreciated!
-Snowconedxx39

Shooted videos directly saved to the SD memory card is no problem, the log and transfer window immediately recognizes the sd card and I was able to convert the videos. I will check later today if this were 25p, 50i or 50p footages.
Strangely enough is that transferring the .mts files from the internal memory to the sd card (using the Mac finder, I don't know if it is possible within the camera itself) won’t help, the log and transfer window doesn't the recognizes the transferred files, strange!
I hope that this problem will not occur using Final Cut Pro X, which I will start using soon.
I'm curious what the exact problem will be.

Log and transfer not recognizing my p2 cards

I have been off my computer for a few weeks and I just went to upload data from my p2 cards and log and transfer will not recognize them. I copied the card contents with the text docs into folders on my desktop to do the transfer and the Log and Transfer still did not work.
Last time I had problems with this was a quicktime update, I have updated since and it worked fine until now. does anyone have any experience with this problem or have I just messed something up? I am running FCP 6.0.4.

Do you have FX Factory installed? Version 1 and 2...and the demos...interfere with import. Either remove it or update to 2.0.1 and that will fix it.
Shane

Log and Transfer not working after reformatting computers

I have taught with FCP for years. This year, tech services reformatted my computers. Since they were formatted, Log and Transfer does not work with my Sony Handycam. A couple computers that have not been reformatted still Log and Transfer with no problems. The only difference I can find is that the newly formatted computers are running OSX 10.6.8. The computers that still Log and Transfer with no problems are running OSX 10.5.8.
I don't know if that is the problem, but would appreciate some direction here.

To cut unwanted parts off MTS files losslessly, try final mate for mac. That is the tool to help cut or trim MTS and still export MTS without any quality loss. Look through this blog to know how to make it done.

Log and Transfer not working at all

I'm really frustrated by the Log and Transfer procedure. Does it actually really work?
I have some HiDef video on an SD card, (no mixed media, just the video files) and the Log and Transfer option WILL NOT bring any of the files in. They are all AVI files, 720p, readable/playable by QuickTime, even readable and usable by FCE if I drag and drop each file, although to watch it without stuttering, I need to render it. The video is from a D-SLR (Pentax K-x to be exact)
But I want it in a native format so after it brings it in, I don't need to re-render it every time I move or trim it .0001 seconds in one direction.
When I try and do the Log and Transfer procedure, I get the error message that :
"xxxx contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
No support for 720p AVI files? Seriously? That just can't be right.
I have tried selecting the top level mounted object as well as selecting various directories drilling down into the card's data. Same error message every time.
I have also tried selecting various "Easy Setup" configurations. None made any difference what so ever.
The manual seems to suggest that you just select the media object and the magic happens. What the heck is going on? Any ideas?

Hi -
FCE currently supports 3 types of media directly:
!http://www.spotsbeforeyoureyes.com/FCEOpenTimeLine.jpg!
The latter two types, HDV and AVCHD it supports by converting the video format to Apple Intermediate Codec (AIC) during the ingestion process.
The video that your camera makes is none of those formats, so you will need to convert the video to a format that is usable in FCE natively. This is why you are unable to use Log and Transfer. In order to use Log and Transfer, you would need to have video that conforms to the AVCHD standard.
You can manually convert your video files by downloading MPEG Streamclip (free) from
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
and converting your video to AIC 720P.
Then use easy set up in FCE for HDV 720P and manually import your files by going to the menu File > Import, or simply dragging the files from the finder to your FCE browser.
You don't mention what frame rate you camera shoots at, but FCE only works with standard broadcast frame rates (29.97 fps), so it won't be able to use 24fps material.
You would need to use Final Cut Pro to natively support that.
Hope this helps.
MtD

Log and transfer not changing frame rate to slow motion on P2 cards...

Hello.
I swear I have done this before on final cut studio 2 and it came out correctly, but for some reason this time, either myself or the computer is making an error. (chances are it's me).
Basically, I'm logging and transferring footage that was shot on P2 at 50 fps, and my intention is to import it at 23.98 fps. I thought this is something that naturally happens in the log and transfer process, but i guess not?
My project was set up via easy set up at panasonic dvcproHD frame rate 23.98... and I'm logging an d transferring directly into my browser but the f frame rate stays at 50 fps. (footage was shot in England to be incorporated into a video already shot in America).

I thought this is something that naturally happens in the log and transfer process, but i guess not?
Your guess is right...it DOES NOT slow it down upon injest. ONLY if you set the camera up to shoot 720p25 and then choose the 50 frame rate (I hear this is what you do...I am not a camera guy, so...), then it will import slowed down. But you have to set the camera up CORRECTLY. The first time I imported slow mo, it was 60p...and I had to use the Frame Rate Converter to slow the clips. Then my camera guy figured out the setting in camera and BOOM...there it was.
So...I guess you are NOT wrong...actually. It just needs to be set up IN CAMERA in order to do what you want.
and I don't know if the Frame Rate Converter works for PAL footage...stupid, but...no...Stupid.
Shane

Husband and i used to share an iTunes account when we exceeded our device limit I started a new account he has 2 movies I purchased I want them he does not can he transfer - give them to me somehow?

Husband and I used to share an iTunes account when we exceeded our device limit I started a new account he has 2 movies I purchased I want them he does not - can he transfer - give them to me somehow?

Items purchazed under one account cannot be transferred to another

Does not log and transfer

Similar Messages

Maybe you are looking for