Does not recharge using supplied charger, what is cause?

Does not recharge using supplied charger, what is cause?

Have you tried a different charger and/or cable ? Do you know anybody else with an iPad so that you can try their charger and cable and they can try yours ?
Have you tried a reset to see if it charges after the iPad has restarted ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • Ipod nano graphite does not turn on or charge. what can I do to fix it?

    I was listening to my ipod when my phone rang, I turned it off to answer the phone and the Ipod does not start after that or charge.

    So what did you do to solve this? I am having the same issue.

  • Ipad does not turn on, is charged, what can I try?

    Daughter's ipad has charged all night but will not power up.  Any ideas or do I need to get service?  It is running original software, has not been upgaded since purchase in 2010.  Only uses for games and netflix

    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • I have Photoshop CS3 which I have used successfully for a number of years.  I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file.  What

    I have Photoshop CS3 which I have used successfully for a number of years.  I now shoot pics with a Nikon DSLR D7100. When I try to open NEF files the following flag appears: "Could not complete your request because PS does not recognize this file".  What do I need to do to open my NEF files??  Thanks.

    Thanks for the quick reply, CP
    FYI, the file is a photographic panorama based on several .CR2 photos taken in July, 2012 and processed in CS5's camera RAW/Photoshop.  Beyond the metadata, here are no fonts or text in the file.
    1.  I changed Maximize ...File Capability from "Never" to "Always" and the flattened file saved and loaded OK, though I can't figure why given Adobe's description of this option. "If you work with PSD and PSB files in older versions of Photoshop or applications that don’t support layers, you can add a flattened version of the image to the saved file...".  The file saved in this manner is ~8% larger and is not my preference as a routine since I've TB's of photo files.  By the way, out of thousands of .psd/.psb files, the one being discussed is the first to give me the error.
    2.  I've tried saving/reloading the file on another computer with Win XP Sp3/CS5...again with Maximize Capability OFF.  Same problem.  Turn ON Maximize Capability and it works.  As with the Win 8 machine, Bridge could neither create a thumbnail or read Metadata.
    3.  I've purged the Bridge Cache, made sure there were no old PS page files, reset PS preferences, and disabled my 2 plugins with no change in the problem.  Windows and Adobe progs are all updated.  Saving to a different HDD has no effect.
    The problem occurs on 2 computers (Win XP/Win 8), two versioins of Photoshop (CS5/CS6), and "Maximize" On/Off togles the problem.  My guess it is a bug in PSD processing routines.
    If I can't find a fix, will keep with Maximize ON and deal with the larger files that result...the cost of insurance, I suppose.
    Thanks again

  • Since ipad air does not support adobe flash player what is good to use?, Since ipad air does not support adobe flash player what is good to use?

    Since Ipad does not support Adobe flash player what is the best one to use?

    Adobe has not made a version of Flash for the iPad.
    Kappy explains why. https://discussions.apple.com/message/19446567#19446567
    5 Flash Player Alternatives http://www.techshout.com/features/2011/01/flash-player-for-ipad-apps/
    Top 4 browsers supports flash player on iPad and iPhone
    http://mashtips.com/flash-player-ios/
     Cheers, Tom

  • Lightroom 5 stopped working. Told to remove the program and re-installed. Creative cloud installation does not proceed to 0%. What is wrong? Using a PC.

    Lightroom 5 stopped working. Told to remove the program and re-installed. Creative cloud installation does not proceed to 0%. What is wrong? Using a PC.

    I installed the Creative Cloud again. Now it works.

  • HT201335 when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?

    when using apple tv with my ipad, the mirroring function does not work, screen goes black, what is the issue?  My son's Ipad(same as kind as mine) works ok with the apple tv but mine does not.  Any suggestions?

    Hello Nina Izurin,
    While written for the iPhone, the troubleshooting below can help resolve issues with your iPad's camera, as well.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Cheers,
    Allen

  • I left the battery of my iphone 4 run out of battery and know it does not recharge

    yesterday i forgot to recharge my iphone4 when it was nearly out of battery so when i wanted to use it today it was already dead
    so i put the phone on recharge but it looks like it does not recharge and i cannot even turn it on.
    can anyone please inform me of what the problem is and what should i do.

    It takes up to 15-20 minutes of recharging after auto-shutoff for the phone to restart.
    1. Charge with AC adaptor for 1 hour.
    2. If phone has not restarted, reset iPhone (no data loss):  Press both home and power buttons for up to 30 seconds, releasing when the Apple logo appears
    If no signs of life after a reset, there is a hardware failure that needs evaluation by Apple or whoever provides iPhone service in your country.

  • Excise invoice does not exist in supplying plant

    Dear all,
    We are having a scenario where in we are doing stock transfer from one plant to other the system gives an error message that the excise invoice does not exist in supplying plant.
    Created a PO for stock transfer, posted GI against it, created excise invoice in J1IS with transaction type other. We are having separate excise registeration for the two plants.
    Secondly request to kinldy let me know what account enteries should be generated when we post excise invoice for the supplying plant.
    Regards,
    mahesh.

    Hi,
    In case of STO process using SD the process flow is like
    1. Create a PR against the supplying Plant (ME51N)
    2. Create a STO (PO) with ref to the PR (ME21N)
    3. Create a Outbound Delivery with ref to the STO. (VL10B/VL10D)
    4. Create a Proforma Inv (VF01) No Acc docs gets generated.
    5. Create a Excise Inv for the supplying Plant (J1IIN) Accounting Doc gets Generated.
    The Accounting Entries at the time of Excise Inv creation for the supplying Plant is:
    Excise Duty Expenses on  Sale                               Dr
    Excise Duty  Payable                                    Cr                    
    Sec.& Higher Edu Cess Payable on Excise               Cr                                            
    Edu .Cess Payable on Excise                    Cr
    At the time of Goods Receipt at plant
    1.Good Receipt at Receiving Plant (MIGO) - No Accounting docs get generated only Qty update takesplace.
    2. Capture & post the excise @ the Receiving Plant during MIGO by entering the Supplying Plant excise inv as reference.
    Hope it is Clear.
    Revert incase of any queries.
    Regards,

  • Service entry Sheet does not pick any Condition charges From Service PO

    Hi All
    Service entry Sheet does not pick any Condition charges From Service PO. What could be the reason ?

    HI,
    Please check Sap note 381030
    Along with other thing It says
    "Delivery costs are generally not supported in external services management and in case
    of blanket purchase orders, item category D or B. Instead of representing delivery
    costs via conditions, in case of service documents, freight costs and other, SAP
    recommends to add in additional service lines."
    So that is the reason you are not getting those account entry in the time of service entry sheet
    Use another service line with text ( or service master) for the additional costs as suggested by SAP
    Hope it clarifies

  • Media Encoder CS6 does not always "Use Previews"

    I've attempted several transcodes using pre-rendered timelines in Premiere Pro. Media encoder does not always use the preview files despite the appropriate box being checked. Any suggestions what I can look for? I don't see that I am doing anything different between the times it works and the times it doesn't.
    Bruce B.

    We are all just incompetent users here.  As pointed out before this is just a user to user forum, Adobe rarely checks in.
    I was hoping by now you would have gotten to the bottom of this problem and were offering a solution.

  • I am unable to sync my iPhone4 iCal to my Mac iCal. Snow Leopard does not support the Cloud. What do I do?

    I am unable to sync my iPhone4S iCal to my Mac iCal. Snow Leopard is my OS and it does not support the cloud. What do I do?

    To makeuse of iCloud you will have to upgrade your Mac to Lion or Mountain Lion, provided it meets the requirements.
    The requirements for Lion are:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OS X v10.6.6 or later (v10.6.8 recommended)
    7GB of available space
    To purchase it you will have to ring Apple at the number given at the bottom left of this page.
    The requirements for Mountain Lion are listed here:
    http://www.apple.com/osx/specs/
    It is available from the Mac App Store (in Applications).
    You should be aware that PPC programs (such as AppleWorks) will not run on Lion or above; and some other applications may not be compatible - there is a useful compatibility checklist at http://roaringapps.com/apps:table

  • HT1937 I am trying to charge my Iphone 4s and suddenly i can not get it to charge, what might be the problem?Brian

    Hey guys,
    I am trying to charge my Iphone 4s and suddenly i can not get it to charge, what might be the problem?Brian

    Are you using a original USB cable? if not, than it could be the cable. If you are charging the iPhone with your computer, sometimes the USB port where you plugged in the cable stops working. plug it into a different USB port. 

  • When I try to download an iTunes software update I get an error message that my start up disk does not have enough room.  What do I do?

    When I try to download an iTunes software update i get an error message that my start up disk does not have enough room.  What do I do?

    You probably have run out of space, I would delete (or move to an external drive) things that aren't being used as much.

  • DB Connector Error : the license key does not include use of OpenSQL driver

    Hello,
    I am new developer on Crystal Report tool and i face an issue : When I try to refresh data I get the following error message :
    DB Connector Error : the license key does not include use of OpenSQL driver.
    Does someone know how to get the correct license key ?
    Many thanks for your help!
    Regards,
    Christiane

    Hi Christiane,
    What version of Crystal Reports are you using?
    Who owns the OpenSQL driver?
    Thank you
    Don

Maybe you are looking for