Does not recognise CD burner
i recently replaced my cd burner with a dvd-cd one, but now itunes refuses to burn cd's saying that they the disc burner is not found... i need to change the hardware that it is looking for in the preferences-advanced-burning from my old burner to the new one... but the question is how on earth do i do that?????
well done dani!
i was wondering if you had a 5.0.x. i used to see a few reports of itunes and QT working but not showing up in Add/Remove back in the 5.0.x days.
glad you're up and running again!
love, b
Similar Messages
-
Solution .Itunes does not recognise your your burner
If itunes does not recognise your burner, look in (my computer) if you have more drive than you actually have.if this is the case, you have a logical drive. You must go in your control panel and disable it. When you will try to burn .Itunes is gonna see your burner and ask you if you want to use it .
I also have a similar problem.
I have an 80g. Library was in fine working order.
Now, I had my computer wiped out, with a new itunes library.
I want to transfer my ipod music to my itunes library, but all of the programs to help me do this will not recognize my ipod, even on disk use and manual settings.
What do I do without clearing my ipod music? -
HP dv7 notebook PC does not recognise the dvd burner.
HP dv7 notebook with win7 64bit does not recognise the dvd burner.A diagnostic check says the dvd is working but it cannot play or burn CDs,DVDs as the DVD does not appear with the other HDs in the computer window.Can anyone help?
Hi,
It's possible that this is a hardware issue with the optical drive itself, but try running automated fixit from Microsoft on the link below.
Windows 7
Check if the drive is now working.
If it still doesn't work, click the Start Menu, open All Programs, open Accessories, right click the Command Prompt and select 'Run as Administrator'. In to the prompt type the following command and hit enter.
sfc /scannow ( note that there is a space between sfc and the / )
Let the process complete, then type exit and hit enter.
Next, click the Start Menu, open the Control Panel and click on Device Manager. Next click to open DVD/CD-ROM Drives. Right click the drive and select uninstall. Do not delete drivers if asked. When the device has uninstalled click on the 'Scan for Hardware Changes' icon ( usually just below Help on the toolbar ). Let windows reinstall the drive and see if it now works.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Itunes does not recognise CDs................please help
i've had my ipod for a few months now and it hasnt been a problem before as it has always imported CDs fine onto my ipod but recently whenever i insert a CD into the drive itunes does not recognise that i have put a CD in and it cant be the CDs that i put in as i have leant one of them to my friend and she said its worked fine on her itunes, when i insert the CD and go onto run CD diagnostics this comes up,
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
FUJITSU SIEMENS P5SD1-FM2
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 6200SE TurboCache(TM)\GeForce 6200SE TurboCache(TM)
IDE\DiskST3160023AS____________________________3.00___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomHL-DT-STDVDRRW_GWA-4164B_______________1.03___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: HL-DT-ST DVDRRW GWA-4164B, Rev 1.03
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: HL-DT-ST DVDRRW GWA-4164B on -128(0xffffff80) media at speed 0X.
i dont even understand what this means, please help!!!!!!!!!!!! thanx xxxxWell the report just tells basics of your setup and errors going on in short. Error -128 means either you or iTUnes cancelled the burn before it even started.
Your issue tho is you have no lower filter. you should have 2, and upper filter and a lower filter. Now Im not that good with the filter thing just yet, but I think if you reinstall itunes it will install the lower filter you need.
You will want to remove itunes AND quicktime in the control panel>Add/remove. Dis able any antivirus/security programs so they do not interferr with iTUnes and then download and install the latest iTunes from www.apple.com -
Elements does not recognise prel file
I saved a project to DVD (photos with background music) Elements does not recognise "prel" file when trying to reload project. How do i open file in Premiere Elements 10
Chris (Herbie53)
There was no Premiere Elements 5 and 6. The version numbers went 1, 2, 3, 4, 7, 8, 9, 10, 11, 12 (latest) So you probably use Premiere Elements 4 or maybe 7 on probably Windows 32 bit XP or Vista.
Case 1. (Here we assume that you have the project.prel file (project) saved to a DVD disc as data disc.)
Even if you had saved that older Premiere Elements project file (project.prel) along with copies of the media that went into it, it is still questionable whether that old project.prel could be opened in Premiere Elements 12. But, assuming that the media was still connected to it (which it probably is not), you could try by right clicking the project.prel file and selecting Open With Premiere Elements 12. Have you gone that route, and the project would not open or you were greeted by "Where is the file...?" messages.
Case 2. (Here we assume that, when you were using the the older program, you took the project Timeline to DVD-VIDEO on DVD disc...this is not the project.prel file, but an export of it.)
In this situation, if you put your DVD disc in the burner tray and explored it, you would see two folders, one named OpenDVD and another named VIDEO_TS. This is your best case scenario. If this is the case.....
a. Put your DVD disc in the burner tray.
b. Open Premiere Elements 12 Expert workspace. Go to File Menu/New/Project and Change Settings.
In Change Settings, set the project preset for either NTSC DV Standard or NTSC DV Widescreen. For now, we will assume NTSC DV Standard. Then, before you exit that area, in the last dialog that you see (new project dialog), make sure you have a check mark next to "Force Selected Project Setting on This Project".
c. Next, back in the Premiere Elements 12 Expert workspace, use Add Media/DVD Camera or Computer Drive/Video Importer where you will select video files from the VIDEO_TS Folder to bring into the Premiere Elements 12 project. You will have to redo the menu in 12. The video files that you want from the VIDEO_TS Folder typically start with VTS_01_1.VOB and continue in series which can be detailed later.
Goal right now is to sort through the details so that we are in sync on what you have in order to enable us to be confident about the troubleshooting strategy.
We will be watching for your comments and results.
Thanks.
ATR
Add On.....The classical recommendation has always been to complete a project in the program in which it was created. But let us see what can be done here. -
Exported my video from Elements 12 - format mp4 but Powerpoint does NOT recognise the video file. Why?
.wpl appears to be a Windows Media Player playlist. I can find no conversion software for that, and Windows Media Player is not available for Mac anymore.
If you can persuade him to download iTunes and create the playlist as mp3 in a iTunes playlist, or even just burn the base mp3 files to CD as a data disc, that's about the only solutions I can suggest. -
IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"
Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.
I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!
-
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
i changed from i iphone 5 back to a iphone 4.. now my itunes does not recognise that i have a iphone 4! how do i convert my last back up (on iphone 5) to my new iphone 4?
In your case you can only restore from a backup that has been created with the same iOS version. An iPhone 4 can only run 7.1.2, and, unless your iPhone 5 did not run the same version, you can't use a newer iOS backup of the 5 on the iPhone 4
-
I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success. -
Any ideas why my Apple TV does not recognise my iTunes password, when all other devices, including these communities are good with it?
Hi Mick2291,
Thanks for visiting Apple Support Communities.
I'd suggest restarting, and then restoring, your Apple TV if the issue persists:
Apple TV (2nd and 3rd generation): How to restart your Apple TV
http://support.apple.com/kb/HT3180
Apple TV (2nd and 3rd generation): Restoring your Apple TV
http://support.apple.com/kb/HT4367
Best Regards,
Jeremy -
please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.
there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit. -
Itunes does not recognise ipod touch
i've reinstalled the latest version of itunes plus ios 6 and followed the troubleshooting sections for Windows 7 PC but itunes does not recognise the ipod touch. the USB cable is ok (charges the ipod anyway) but when I run diagnostics it does not see an ipod.
iOS: Device not recognized in iTunes for Windows
Try another computer to help determine if you have an iPod or computer problem. -
Windows does not recognise my phone
I get this message when I connect my phone to all computerr,
the last USB device connected has malfuntioned and windows does not recognise it??Hello,
Check out these steps from Apple: http://support.apple.com/kb/TS1538
This should help!
Regards,
Jake -
i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”
Maybe you are looking for
-
The javascript makes the input field to be null and cannot pass variable to
Hi I use the following code to check whether the upload file is in the right format extension. However, once I use it and it cannot pass the variable to servlet and throw nullpointerexception. How can I fix it? <script language="JavaScript"> extA
-
I'm working on a student project in 3rd year undergrad, we are setting up a mock security and control system for a nuclear reactor. We've had about two months (3hours a week) of using Labview for experience, and a semester of using Matlab in first y
-
Getting a BT homehub for parents - How?!
Hello all. When I was still living with my parents, we set up a BT Broadband internet account on their phone line for my own usage. At that time wireless was unheard of, and my account used a third party router, and my friend had to get connection se
-
I have a 6.1.6. MAC desktop and my on-line bank has recommended I download separate anti-virus software and turn on Firewall Please advise Thank you Karinband
-
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
The SQL server process always show RAM is highly used while its a default behaviour of sql server. How can I make sure that in RAM our sql server is not facing any mermory crunch issue? Thanks