Does not say "The oldest backups are deleted when your disk becomes full."

I am helping someone set up her backup, but I noticed that in the Time Machine window, there is no line that says: "The oldest backups are deleted when your disk becomes full."
She is running Mac OS 10.5.8, on a 2.66 GHz Quad-Core. Her first backup ran fine, but we're concerned that it will not delete older backups automatically to make space.

It works differently in Leopard and Snow Leopard.
In Leopard, the box is titled +Warn when old backups are deleted,+ and Time Machine will fail with a message when it runs out of room and that box is checked.
On Snow Leopard, the title is +Notify after old backups are deleted,+ and that's what happens -- the old backups are deleted, then you get a notice.
See #C4 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

Similar Messages

My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases. none of my purchases are free i paid so how do a recover them?

My computer had to be repaired and i lost some of my purchases. my purchase history does not include the ones that are missing and the ones that do appear indicate they are free purchases. none of my purchases are free i paid so how do a recover them?

asuming you are talking about the app store try signing into your account using your apple id into the app store.

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Can I migrate from mavericks to mavericks server. Have tried using a hard drive but the but the sever does not find the migration backup when it's searches. Any help out there?

Is the HDD in the 2009 15" MBP dead? (The original source of your data) If not, you might want ot take it out and put it in an enclosure.
You might try spotlight on know files to see if that gives you any clues where your data is located.
You might down load from the Internet OmniDiskSweeper (free) and open it. It should show you all of the files you have on your MBP and enable to locate them.
Ciao.

HT3529 I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?

I'm having trouble with my iPhone 5 iMessage service. The device does not recognize the users who have iMessage when I try to contact them using this feature. Who have the same issue and what did you do in order to solve it?

Read here:
http://support.apple.com/kb/ts2755

Since the latest update to OX I have been unable to download the contents of some emails because pages does not support the font they are created in. Is there a fix for this?

Hi, since I installed the latest update on my Mac I have been unable to open the contents of some emails because it is saying that pages does not recognise the font. For example it is saying 'some features aren't supported, the font Calibri isn't available on OS X. It was replaced with TrebuchetMS' This means that I cannot open letters from my daughters school. Is there any way round this other than getting rid of this nightmare MAC and going back to Windows!?

http://www.mozilla.com/en-US/firefox/3.6.13/releasenotes/
Had the same problem; would have been nice if they had told s that we need an intel processor on our older Macs! I am up and running again.

SSIS ETL does not pick the file from Share point when it execute through SQL Agent job

I have created one SSIS packages, which pick the file from the Share point document library. its work successfully, once it execute through the VS project application.
But when i create a job in SQL Server Agent for this package then it does not pick the file and job getting fail.
Just for more update, SQL Server has been install in Cluster mode and using BIDS 2012 with SQl Server 2012.

Hi PriyankGupta,
SQL Server Integration Services is not cluster awareness, and does not support failover from one cluster node to another. So, in your clustered environment, make sure SSIS is installed on each node in the cluster. In other word, SSIS must be installed on
the server where the SQL Server Agent job is created.
If you use any third party task/component or drivers, make sure they are installed on the SQL Server Agent job server. Besides, also pay attention to the protection level of the package as well as 32-bit or 64-bit runtime mode of the package. For more information,
please see:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/e13c137c-1535-4475-8c2f-c7e6e7d125fc/how-do-i-troubleshoot-ssis-packages-failed-execution-in-a-sql-agent-job
If the issue persists, please post the error message in the job history for further analysis.
Regards,
Mike Yin
TechNet Community Support

Firefox Nightly does not provide the Windows 8 Touch option when I open the menu. Do you have another suggestion so it doesn't open in desktop mode?

I followed your advice to have Firefox open in Touch mode with a tile in Metro mode. However, when I click on the three lines (menu) it does not have the option of choosing Windows 8 Touch. I can only open Nightly in desktop mode and I'd rather have it as part of my tiles. Can you suggest another way to convert it to Metro?
Lauren

HI Lauren,
Unfortunately I do not have a device to test this out on. They did stop development of Firefox for Metro back in March.
However other documented ways of launching in metro mode can be seen in the wiki.
[https://wiki.mozilla.org/Firefox/Windows_8_Integration]

How does Time Machine decide what to delete when its disk gets full?

Time Machine deletes the "oldest" backups when it needs more room for a new backup. But exactly what does that mean? Does it delete the oldest backups for the disk being backed up? Or does it delete the oldest backups across all source disks?
For example, if I back up N Macs to a single drive until it is nearly full, what happens when I add the N+1th Mac and start backing it up? Will it remove some existing files to make room for the new disk's backup, or will it just say "no more room"?
The answer to this question will affect my choice of backup disks to purchase.

If you're backing up multiple Macs to a TM backup Volume then if the TM Volume's free space becomes exhausted and TM cannot find room for the current backup it will start trying to delete the oldest backup snapshots associated with the Mac being backed up. It will not touch backup snapshots for the other Macs.
After 37 days all TM snapshots will be weekly snapshots (with a Sunday date). So if you've been running TM for 37 days or longer there will be one or more weekly snapshots. TM will start with the oldest weekly snapshot and start trimming away to make more disk space available.
TM is supposed to alert you BEFORE it starts deleting oldest snapshots but at this time it will perform these deletes silently and as much as it can and then only if there's insufficient space will it tell you it has deleted old snapshots but there's still insufficient space for the backup

Outlook 2007 instead search does not show the items which are actually present in the inbox and folders

Scenario:
when user search for any particular email item by using the sender name or subject name it does not show any result. At the same time it works fine when he specify the search folder(target folder) instead of searching it across all the folders/sub-folders.
1. We tried reconfiguring the outlook profile but this not fixed the issue.
2. It is specific to only few users but so far for all the others users it works fine.
3. Restarted the “Microsoft Exchange Indexer Service” but this is also not fixed the issue.
4. Hence the outlook reconfigure not worked, rebuild the search index not tried yet, but will give a try.

Hi,
Did the user select All Mail Items scope when searching in Outlook?
In addition, please make sure the user is not searching in a shared mailbox because in some configurations, you are limited to using the
Current Folder search scope when searching in a shared mailbox.
Please also let me know the result if you have tried rebuilding index.
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My MacBook Pro does not pass the startup grey screen. When I try to do a reinstall the computer doesn't even read the disk. I can't even boot in safe mode. I'm being told that it MAY be a motherboard issue, I'm just wondering has anyone else had this prob

I don't know what is wrong with my Mac. An authorized retailer can't pinpoint the issue.. Does Apple have a recall for motherboard failures? We have only had it for 2 years.

MimiBrooks,
try booting your MacBook Pro into Recovery mode by holding down a Command key and the R key as it starts up. Once the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Does it get past the grey startup screen now?

How to make an action that does not record the path in which you save your file

Hi all, once I set an action like this:
and with the batch i can always choose the destination folder, time by time.
But I tried to do a similar action that saves a png file, but I can't leave the "in: " empty, it always fill with a path.
How can I do?
Thanks a lot!

Basically i need to create a new document out of a folder full of images.
You may have to look into Scripting to achieve something like this.
You could ask in the Scriptimg Forum
Photoshop Scripting
But maybe it would suffice to insert the Menu Item
File – Scripts – Load Files into Stack
into the Action and then iterate through the Layers with [ or ] and reset the opacities and Blend Modes – but as Actions would not be able to change the number of repetitions of the operation conditionally a custom Script would still seem preferable.

Why Firefox does not start the Lync online meeting anymore when updated to the version 21.0?

The version 20 worked well. Now the one and only choise is "Get me out of here". I renew the certificate but even "I understand the risks" did not help in the version 21. Now I have to run IE to get the online meeting opened.

hello Seppva, please try this: enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''plugins.load_appdir_plugins'''. double-click it and change its value to '''true''' (a restart of the browser might be necessary afterwards for the change to take effect).
some background on the issue is explained in http://www.ghacks.net/2013/05/15/why-you-may-have-lost-access-to-plugins-or-extensions-in-firefox-21/

HT204053 I just changed my Apple Password and icloud does not recognize the password.

I just changed my Apple Password and icloud does not recognize the password.

To change it on your iPhone you have go to Settings>iCloud and delete the account, then set it up again with your new credentials. When you delete the account from your phone it will delete any data you are syncing with iCloud (such as contacts and calendars) from your phone but it will remain in iCloud. Provided your are signing back into your existing account and not changing to a new account, it will be synced back to your phone when you sign back in.

HT4623 i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

i just bought an iPad from a friend. I think is generation 1 or 2 not sure where to look for this. Bottom line, I would like to update it to iOS7. Is this possible? It does not have the option for software update.

Identify Your iPad
http://www.ifixit.com/Info/ID-your-iPad
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.4. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
You can no longer update to iOS 6.x, or down grade the iOS.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and antivirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
How to Upgrade to iOS 7
The iOS 7.0 update requires around 2.5 GB of storage space, so if your iPad is almost full, you may need to clear up some space. You can check your available space in Settings -> General -> Usage.
There are two ways to upgrade to iOS 7: You can use your Wi-Fi connection, or you can connect your iPad to your PC and update through iTunes. We'll go over each method.
To upgrade using Wi-Fi:
Note: If your iPad's battery is under 50%, you will want to plug it into your charger while performing the update.
Go into the iPad's Settings.
Locate and tap "General" from the menu on the left.
The second option from the top is "Software Update". Tap this to move into the update settings.
Tap "Download and Install". This will start the upgrade, which will take several minutes and will reboot your iPad during the process. If the Download and Install button is grayed out, trying clearing up some space. The space required by the update is mostly temporary, so you should gain most of it back after iOS 7 is installed.
Once the update is installed, you may have to run through the initial steps of setting up your iPad again. This is to account for new features and settings.
To upgrade using iTunes:
First, connect your iPad to your PC or Mac using the cable provided when you purchased your device. This will allow iTunes to communicate with your iPad.
You will also need the latest version of iTunes. Don't worry, you will be prompted to download the latest version when you launch iTunes. Once it installs, you may be asked to setup iCloud by logging into your iTunes account. If you have a Mac, you may be prompted on whether or not you want to enable the Find my Mac feature.
Now you are ready to begin the process:
If you upgraded iTunes earlier, go ahead and launch it. (For many, it will launch automatically when you plug in your iPad.)
Once iTunes is launched, it should automatically detect that a new version of the operating system exists and prompt you to upgrade to it. Choose Cancel. Before updating, you will want to manually sync your iPad to make sure everything is up to date.
After canceling the dialog box, iTunes should automatically sync with your iPad.
If iTunes doesn't automatically sync, you can manually do it by selecting your iPad within iTunes, clicking on the File menu and choosing Sync iPad from the list.
After your iPad has been synced to iTunes, select your iPad within iTunes. You can find it on the left side menu under Devices.
From the iPad screen, click on the Update button.
After verifying that you want to update your iPad, the process will begin. It takes a few minutes to update the operating system during which time your iPad may reboot a few times.
After updating, you may be asked a few questions when your device finally boots back up. This is to account for new settings and features.
 Cheers, Tom

My account does not support the purchase of Games

My account does not support the purchase of Games

What happens when you try to buy something, does the 'buy' button not work, do you get any error messages ... ?
If you are getting a message to contact iTunes Support then you can do so via this link and ask them and ask them for help (we are fellow users here on these forums, we won't know why the message is appearing) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
If it's a different problem ... ?

Does not say "The oldest backups are deleted when your disk becomes full."

Similar Messages

Maybe you are looking for