Does not show 4 audio channels

I was using final cut 4.5 and cutting videos (lots of videos and almost done) and then we realized the audio track is showing as mono and not 4 channels as it is supposed to be. So, yesterday we upgraded to 5.1 and when opening the file, it still does not show as a 4 channel audio but if i import the same video again it shows as having four audio channels.
So my question is, all the work that i have already done on the videos, is there any magic command in Final cut that can make the videos appear as having 4 audio channels since the original video has four channels?
Hope it makes sense
Thanks

When you load a clip in the viewer, do all four tracks appear in the timeline's target buttons? did you before? All four have to be connected to the 4 tracks in the Sequence when you make an edit if you want all four tracks to appear in the timeline...
You could perform a match frame if all four tracks are really in the clips, and then overwrite the same shot to itself with all four tracks connected in the targeting buttons pretty fast or use the replace edit command to maintain any transitions you've added.
Jerry

Similar Messages

Premiere CS6 - MXF export with 8 channel audio does not export my audio channels correctly

Hey Volks,
when i try to export an mxf file with 8 channel audio, premiere does a kind of main mix in channel 1 and 2 and channel 3 to 8 remain silent. It does not include my assignment of audio channels in the mxf file.
im very thankful for any idea...

Hi Dast Media,
Have you resolve the multi channel export?
I have the same problem...(the export it's ok but i hear only the first two tracks)
i need to export a MXF file with 8 tracks, 6 stereo and 2 mono.
Thank you for help!

Itunes does not show my audio cd on the left panel

Hi,
I have a Dell Laptop with Windows 7.
When I put an audio CD into the DVD/CD-drive, I can hear the music with every program on my computer except from iTunes.
The audio CD is not shown on the left panel of iTunes.
The CD does not have a copy protection because iTunes on my father's computer does show the CD.
However, when I run the diagnostics, there a no errors. iTunes recognizes even the tracks on the CD etc. - everything is fine.
Only the CD is not shown on the left panel and I cannot hear the tracks of the CD nor rip it.
I have already checked the support sites, I have already checked the DVD/CD-drive filters, reinstalled iTunes, downloaded the latest firmware and the drivers etc. etc. (and everything else what is recommended on Apple's support sites).
Can anybody tell me how to solve this problem?

ctrl S - Show sidebar.

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

HT201272 Purchase history in itunes on pc does not show audio books that I have downloaded. How do I download them to my itunes library?

I have the current version of itunes on my pc and my wife had downloaded a few audio books to her i phone under the same account. Her phone was damaged and was replaced. I had backed up the phone and restored the new one but her audio books were not put on the new phone. When i look in my itunes library on my pc the book does not show up. In the purchase history I can find when i purchased it and the order number but there is no option to download it. Then under the "purchased" area it gives the options of music movies tv shows apps and books (not audio books) but audio books are no where to be found. If i can get any help figuring it out i would appreciate it.

Hey innerev2003,
Thanks for the question, and welcome to Apple Support Communities.
If, while searching through your past purchases, items are unavailable to download and show a "Purchased" button, they are still on your computer. It may be best to search your iTunes library by clicking Music, then use the search bar at the top right.
If you are completely sure the items are no longer in your library, try signing out of the iTunes Store, and then back in.
iTunes 11 for Windows: Manage your iTunes Store account
http://support.apple.com/kb/PH12507
Thanks,
Matt M.

CJC channel does not show up in MAX

Greetings,
I have an SCXI 1124 that I am reading in 32 TC's with. When I try to configure it for CJC internal under MAX for physical channel it does not show up as described in "DAQmx Acquire CJC Temperature". In that document the CJC physical channel should show up as a string similar to SC1Mod1/_cjcTemp but all I see under MAX under the 1124 is ai0-31. I know this should be obvious but could someone shed some light on this and explain my oversight.

Hi teslac,
The SCXI 1124 is an Analog Output module. Could you mean an 1121 or 1125 possibly?
Also, are you scanning the cjc temp channel along with the thermocouple channels? There are some SCXI modules that have to scan only the cjc temp channel without any other channels. You can find this information int he KnowledgeBase article below.
How Can I Address and Use Cold Junction Compensation (CJC) with SCXI Modules?
Hope this helps!
Robert R. | Applications Engineer | National Instruments

I am not able to import a audio CD the import window does not show up

I am trying to import a music CD but the import window does not show up and the cd does not copy into itunes.

Hello Kathryn,
Thank you for the details of the issue you are experiencing when trying to import songs from a CD. I recommend following the steps in the section titled "If you have trouble importing songs from an audio CD" in the article below:
iTunes 11 for Windows: Import songs from CDs
http://support.apple.com/kb/PH12486
Thank you for using Apple Support Communities.
Best,
Sheila M.

Device summary pane does not show capacitiy totals for each category (audio, remaining, photos, etc.)

When viewing the summary pane for my ipod, the summary bar does not show totals for each category (audio, remaining, photos, etc.). It does not show when hovering over each category either. Seems to be some type of bug with itunes. I have tried re-installing itunes but that does not work. How do I fix this?

Hello vetsrini.
Thanks a lot for your kind reply. As i said, i'm new to this and sometimes i just cannot pass over some problems. Here are the fields i have inserted:
<?for-each:LIST_G_SETUP/AS_OF_DATE?>
<?end for-each?>
<?for-each@section:G_CUST_INV?>
<?for-each:G_1?>
<?INVNUM?>
<?INVOICE_TYPE_INV?>
<?DUE_DATE_INV?>
<?sum (C_INV_BALANCE)?>
<?sum (C_INV_B0)?>
<?sum (C_INV_B1)?>
<?sum (C_INV_B2)?>
<?sum (C_INV_B3)?>
<?sum (C_INV_B4)?>
<?sum (C_INV_B5)?>
<?end-for-each-group?>
<?TOTAL_INV_AMT_DSP?>
<?TOTAL_INV_B0_DSP?>
<?TOTAL_INV_B1_DSP?>
<?TOTAL_INV_B2_DSP?>
<?TOTAL_INV_B3_DSP?>
<?TOTAL_INV_B4_DSP?>
<?TOTAL_INV_B4_DSP?>
<?end for-each:G_CUST_INV?>
In the header of the template i also have <?CUST_NAME_INV?> and the report date. When i try to enter the <?AS_OF_DATE?> it is not printed and also the header is not shown any longer. Once again, thank you for any help,
Octavio

My ext HD Icon from a portioned drive does not show up on Desktop

I have an external hard drive with two partitions that both showed up on the the desktop. For some reason, one of the partitions stopped showing up on the desktop but does show up when viewed from finder, disk utility, etc.
I ran permissions, relaunched, etc. One of the partitions still does not show up- very frustrating. I looked at info, preferences, etc. and can't figure it out.
I plugged the hard drive into another computer and both show up there...
So any help will be greatly appreciated.
Skip

Hello markshepherd1,
Thanks for using Apple Support Communities.
According to the following article, when you're going through the process of burning a playlist to a disc, you have the option to select "Include CD Text".
If you’re creating an audio CD, choose your options:
Change the recording speed:
Choose an option from the Preferred Speed pop-up menu.
When you burn an audio CD, iTunes automatically uses the best recording speed for the CD. However, if your blank CD is rated for a slower speed than the maximum speed of your drive, or if you experience problems creating CDs, you may want to change the recording speed to match the CD’s rating.
Change the amount of silence between songs:
Choose an option from the Gap Between Songs pop-up menu.
Have all the songs on the disc play at the same volume:
Select Use Sound Check.
Include information that disc players in some vehicles can display:
Select Include CD Text.
iTunes 11 for Mac: Create your own CDs and DVDs
http://support.apple.com/kb/PH12148
Take care,
Alex H.

HT1349 I have registered with my local library and can download books. But these are not being shown in ITunes, the Library does not show 'audiobooks'. I have an ipod 6G. can anyone help please?

I have recently purchased (from the States) an ipod nano 6th generation. I belong to a local library and can download books from the audiobooks online section. Problem is, my iPod when synced to iTunes, does not show Library as a category and audiobooks. For some reason, it is allowing me to download the books to my iPod, but I am unable to delete them from the iPod, and also, it is giving an echo (I think somehow it is downloading twice which is giving an echo effect). Not sure what is going on, but if anyone can advise me on this I would be very grateful.

Hello mrsbonniesue
If you have an issue with the audiobook showing up in music, check to see if those tracks are labeled as audio books or music. The article below will explained as well as I have highlighted the main portion for changing that information.
iTunes 11 for Windows: Edit song and CD information
http://support.apple.com/kb/PH12360
Identify an item that you imported from a CD as an audiobook, so it appears under Audiobooks instead of Music (click the Options button and choose Audiobook from the Media Kind pop-up menu). If you do this, iTunes also remembers your place in the audiobook
Regards,
-Norm G.

Open/Save Dialog does not show new files?

Say you are working on a logic file in a folder and you have
a few audio and movie files in that folder, and you launch
Logic and via the open/save dialog window you add a few
files to your song and in that dialog window you can see
all the files in that folder.
Then, in the Finder you add a few more files and movies to
that folder and again use the open/save dialog window to
add more files BUT the new files you added since launching
logic are NOT SHOWN in the dialog window ! ?
What's the deal with that?
Every other app can show files added since the launch of the
application, why not Logic?
PowerBook G4 1GHz Mac OS X (10.3.9)

project manager
um, yeah.
Should not need the project manager simply to see new files added to a directory in a Open/Save dialog window since last opening the app.
I did a scan, a extended scan, opened all the little turn down arrows of the
full path to the directory I knew there to be the new files and yes, Logic
shows them there in the "Project manager".
BUT Logic still does not show the files in the Open/Save dialog windows.
This is strange because even simple app like TextEdit can show
new files in it's Open/Save dialog function windows without the need of
a project manager.
I have to quit and re-launch each time to see any new files?

Logic pro 9.1.7 does not show note velocity data with velocity tool

Anyone have an issue with files not showing note velocity and duration data with velocity tool in the piano roll in Logic 9.1.7? It only show the note and the velocity change (+1 or -1 for instance). I have to use Logic 9.1.5 because of that.

Hi
glankrudolph wrote:
I realize this could be a host of issues other than Logic Pro 9, such as Audio Midi Setup (which often doesn't recognize my Mbox2 Pro). But again, thought I'd start here.
If Audio MIDI Setup cannot see/recognise the MBox, then Logic will be unable to see it. Audio MIDI Setup is at OS level: if your MBox does not show up it is likely to be:
Driver issues (highly likely)
Cable Issues
FW socket issues: hardware fault.
CCT

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds like there is an incoming call which does not show up in either call waiting or missed calls.

I have an Iphone5s and use Verizon. Frequently when I am on a call, it sounds as if there is an incoming call but it does not show up in call waiting or in missed calls. When I went to check on line, the fix involved a screen that I did not even have on my phone. Anyone else have this problem and is there a solution? I can't seem to get tech support at Verizon. Boo.

Hi Debsy1,
Thanks for the additional details! Let's get this issue resolved. What software version is the device on? Please reset the Network Settings on the device. Go to settings>general>reset>reset network settings. Please Note: Audio alerts may also indicate delivery of incoming text messages or emails. The tone will vary based on the type of information being delivered to the device. Tones may also indicate low battery charge or inadequate signal strength. Keep me posted with results.
Thanks,
PamelaF_VZW
Tweet us @vzwsupport

Trying to upgrade from OS9 to 10.2.3, get as far as "select a Destination" the installation stalls and does not show any destination disks

I have a Power Mac G4, it has OS 9. Imam trying to upgrade to OS 10.2.3 (Jaguar). It is going smoothly until I get to the "Select Destination" screen. It stalls there and does not show any disks to choose from.
Any ideas?
Thanks. Abe Oliver

Hello Abe,
If it's a Digital Audio or earlier, you need to install a Firmware update first...
As explained in "Mac OS X 10.2 Welcome and Install Manuals" and "Mac OS X Welcome and Install Manuals", you may need to update the firmware on your Macintosh computer prior to installing Mac OS X 10.2 or later. The following table lists the firmware updates that are available for Apple products that can update to Mac OS X 10.2 or later.
http://support.apple.com/kb/HT1395?viewlocale=en_US
Power Mac G4
Firmware Update
Download Document No.
Power Mac G4 (Mirrored Drive Doors 2003)
no update needed
Power Mac G4 (FW 800)
no update needed
Power Mac G4 (Mirrored Drive Doors)
no update needed
Power Mac G4 (QuickSilver 2002)
no update needed
Power Mac G4 (QuickSilver)
no update needed
Power Mac G4 (Digital Audio)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (Gigabit Ethernet)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (AGP Graphics)
Power Mac G4 Firmware Update 4.2.8
120068
Power Mac G4 (PCI Graphics)
no update needed
Power Mac G4 Cube
Power Mac G4 Cube Firmware Update 4.1.9
75129

Blackberry maps does not show map just a location

Blackberry maps does not show map just a location on att with 10.0.10.822 os and software 10.0.10.116
http://forums.crackberry.com/blackberry-z10-f254/blackberry-maps-not-working-818297/
Solved!
Go to Solution.

Nope, I don't know the seekrit release dates
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Does not show 4 audio channels

Similar Messages

Maybe you are looking for