Does not show my hard drive when i try to install Tiger...

I have a Powerbook G4 that has no operating system installed yet, so when i try to install Tiger, i have to put the DVD in while booting up. I went to the installing screen, and i agreed to everything and all, but when i got to the part where it asks where to install, my hard drive does not show up. I went to DISK UTILITY and chose to erase the entire hard drive (I dont have anything on it yet) and I also chose to repair it. It didnt have any needed repairs, so I went back to the install screen, and it still didnt show the hard drive as an option. It is a 55.9 GB hard drive, and when i erase it, the size does not change, so I know there is nothing on it yet. In Disk Utility, the details for the Hard drive says it is named CSD CAT060L, it is a Disk, the media type is Generic, and it is Internal. I have tried this many times, but the exact same thing happens. My DVD for Tiger was unopened, and new out of the box. If you need any information about what happens or anything, just ask.
Thanks a bunch, Eshan.

Try this:
1. Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.

Similar Messages

  • WSE2012R2 Dashboard Stoage Tab Does Not Show ANY Hard Drives or Folders

    I have been using WSE2012 for nearly two years as a "home" server. I recently decided to upgrade to R2. After spending several days trying to "migrate" to R2 without any success, I finally did a fresh install to my original system drive
    (a 240Gb Samsung 840 Evo SSD). The install went well until I checked all of my data drives (4x2Tb, 2x1Tb, 1x3Tb and a 2Tb "storage spaces" drive). I found that only three of the drives were online and useable. The "storage spaces" drives
    were not even visible in Disk Manager and all of the other drives were "offline". After doing a lot of searching with Google, I finally figured out how to make the "offline" drives "Online" with PowerShell. With much more searching,
    I also finally figured out how to "bring back" the "storage spaces" drives with about four lines of PowerShell code so I thought I was finally home free... But no such luck. I then had a lot of trouble restoring my "ServerFolders"
    although everything else seemed to be working. I also had rebooted several times while working on these things without any issues. After finishing up yesterday, I planning to finish working on the "ServerFolders" earlier today. 
    I ran into a problem right away, however, when I opened the Dashboard and went to the Storage tab only to find that NONE of the Hard Drives and "Server Folders" showed up. I had an alert that the "Server Storage Service" was
    NOT running. I checked and found it to be "stopped" and in "manual" mode. After starting the service, the Storage Tab showed that it was being refreshed. After a lengthy wait, it never did refresh and the "Server Folders" item
    on the Home Tab showed "N/A". I tried rebooting again. When the server came up, I checked the service again and found it to be running (although it was still on "manual")... But once again, Storage Tab never did refresh properly and still
    showed nothing. This time I changed the service to "Auto" and also tried "Restarting" the service, to no avail. I rebooted again. This time, when it came back up, I first checked the service again and it was running and still on "Auto".
    Before opening the Dashboard, I checked the "Files and Storage" section in "Server Manager" and everything looked good. All of my hard drives and my "storage spaces" drive appeared with no apparent issues so I thought that everything
    was finally OK... Wrong!!!!! I opened the Dashboard and went back to the Storage Tab only to find that it still would NOT refresh so that NONE of my hard drives or folders were showing. I am totally lost at the moment. How can everything actually be there
    and okay but NOT appear in the Dashboard which, by the way, was working fine yesterday -- and I did not make any changes whatsoever between yesterday and starting to work on the system today. I am totally lost. Can anyone please help me resolve this
    issue?????
    Denis W. Repke

    PROBLEM SOLVED. As I was just getting ready to "bite-the-bullet" and reinstall 2012 R2, I discovered something that led me to the solution. When I was previously trying to restart the Windows Storage Service, I "thought" it was restarting
    okay. I was restarting it by right-clicking on the service. When I "started" it this way without opening up the service properties, it would immediately change from "stopped" to "running". What I did not realize was that the service
    was quickly stopping "without" refreshing the screen so that "running" was still displayed even though the service had stopped. Once I realized that the service was not actually restarting, I tried another Google search based on this fact
    which led me to some forum threads that helped me solve the problem since I found others with essentially the same problem. I found two corrupted registry keys under Windows Server\Storage Services. One of the keys was a major entry, the other was in the "Folders"
    subfolder. After deleting BOTH keys, the service restarted without any issues and my drives and folders reappeared in the dashboard. A reboot was "not" required. What a pain! But everything is good now.
    Denis W. Repke

  • Why does Mozilla want to make adjustments to my hard drive when i try to install it on a laptop?

    I have a brand new Asus U52f-BBL9, with Windows 7 Home Premium, 64-bit. It comes wiht IE8. I tried installing Mozill and it asked if i minded teh program making changes to my hard drive. Why? What changes?

    Check that you do not run Firefox as Administrator.<br />
    Right-click the Firefox desktop shortcut and choose "Properties".<br />
    In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.<br />
    You also need to check the Properties of the firefox.exe program in the Firefox program directory.<br />

  • I have a G5 with a brand new hard drive,when I try and install the os I get a panic we are hanging error. What can I do to load the os

    I Get a panic we are hanging error when trying to install the os on a new hard drive on a G5

    Yes, the hard drive needs to be formatted and OS X must then be installed.
    Drive Partition and Format
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    7. Quit Disk Utility and return to the installer. Proceed with the OS X installation.
    It's only a lost cause when nothing else works.

  • Mac does not recognise my admin password when I try to install updates

    I have followed the forget password instructions by installing the Mac OS X install disc and restarting and holding down c key etc and when I put my password in it is still not recognised

    Check the Accounts preference pane to make sure you are still listed as Admin. Check this out:
    http://support.apple.com/kb/TS1278

  • Help my computer does not recognise my hard drive

    Hi All,
    Yesterday I turned my computer on to find that it would not start up. I tried following advice etc about starting up in safe mode etc but no help what I have found is that he computer does not recognise the hard drive anymore so when I out the osx install disk in and run system profiler and disk utility it does not show a hard drive. I have not done anything for this to happen. Can anyone help me with this.
    Thanks.
    Paul

    Instead of using older OS X CD/DVD install to a new drive.
    Where is your backup and clone?
    Buy some drives! that is a must.
    Pick up a FW case, you will need it to put the old drive in, and later, so you have an external and off line drive for backups and maintenance.
    A copy of TechTool Pro 4/5 and Disk Warrior (DW first).
    SuperDuper to clone your drives.
    Demo of Prosoft Data Rescue 3 to scan the drive once you have a system and you put the 'dead' drive in FW case.
    Then do backups and preventative maintenance on a very regular basis and have at least two backup sets.
    If you have been doing that, and know and have read those instructions in the past....

  • I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

    Mac 101: File Sharing
    Mac OS X 10.7 Help: Transfer files between two Mac computers
    Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
    Mac OS X 10.7 Help: Use iDisk to share files
    Mac OS X: Sharing your files with non-Apple computers
    How to share a Mac's files with a PC and vice versa.

  • A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive.  Does anyone know why this is happening?

    The beeps could be caused by something as simple as a loose internal wire or connection.  If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
    If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

  • Windows XP re-installation does not recognize any hard drive - help

    Hi,
    I have X60s Model: 17044JU
    I have original XP installed.
    My computer is very slow and I am trying to reinstall XP from my CD (and format HD so I clean everything).
    When Windows installations blue screen shows up and loads drivers etc then it tells me that it does not recognize any hard drive.
    I thought I may need SCSI or RAID drivers but since I don't have floppy I can not load them.
    Any help how to install new XP would be appreciated.
    Thank you
    Miron
    Moderator edit: Masked serial number to prevent mis-use.
    Solved!
    Go to Solution.

    Hi
    I changed BIOS setup from AHCI to Compatibility and indeed it worked.
    However there is easier way to reload new system on thinkpad.
    I didn't know that but you can press ThinkVantage button when you start your laptop and IBM utilities start up.
    Then there is an option to reload the system to be in original state as shipped from the factory. It loads or drivers and initial programs. It also formats your hard drive.
    I found it pretty convenient.
    Thanks for help.
    mc

  • Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer.

    Recently, U2 music appeared on my ipod without my requesting it or wanting it. I was able to delete all of the songs except for one. How do I delete the last one from my ipod? The song does not show up in iTunes when I plug my ipod into the computer. The version installed on my ipod is 7.1.2(11D257).

    Hi donfrommars,
    Welcome to the Apple Support Communities!
    Please use the following article for information and instruction on deleting the U2 album from your devices and account.
    Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases
    Have a great day,
    Joe

  • My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    My ipod touch 4th gen does not show up in iTunes when I plug it in.  It charges, but I cannot sync it or add new music.  I am using iTunes on a MacBook.

    Which version of iTunes are you using?
    Stedman

  • I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    I have an invoice that I paid to use photoshop and now it is asking for serial number however it does not show a serial number when I log in

    Please then use your web Browser  address http://www.adobe.com/  and sign in with your Adobe User ID and Password to your account the has your Subscription and use https://www.adobe.com/account/my-products-services.html capture the page which shows you have a subscription like I showed you I have.
    Open Adobe Creative Cloud desktop application use the APP tab and capture that scree to show Photoshop is installed and up to date like I did. Capture that screen. Show us you have installed Photoshop and its up to date.
    Open Photoshop and use menu Help it should show tha its activated because there will be a menu item Sign Out. If it is Sign In, Sign in  using the account that has the subscription the one you used above to Activate Photoshop.

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • My youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome

    my youtube does not work on safari only when i try to play a video it says "This video is not available on mobile add to playlist" But i am using a mac air 11 inch it is not a mobile. Please Help. i have to use the youtube on firefox or chrome. At times it also say QuickTime Player can't open "video.3gp". and
    The file may be damaged or may not be a movie file that is compatible with QuickTime Player. when i try to open a video on youtube on safari

    I too am having the same issue as the OP.
    Your USER AGENT information is Mozilla/5.0 (Macintosh; Intel Mac OS X 10_10_2) AppleWebKit/600.3.18 (KHTML, like Gecko) Version/8.0.3 Safari/600.3.18
    Every webserver that receives a request from your browser is able to determine the HTTP USER AGENT information unless it has been removed by some software (e.g. firewall) before the request was trasmitted.

  • I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    I Have a Macbook Pro that does not have a disk drive.  How do I install the Adobe Photoshop Elements 11 that came with the Epson scanner I purchased.  I registered the S/N and I can't find the Free download anywhere only trials.

    Downloads available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Maybe you are looking for