Does not Stream from setting in compressor 4.1

Why won't this 7 min video that I compressed using 4.1 work like the others on this dropdown menu? The video is long but why doesn't it stream? I tried it a few different settings in compressor 4.1 but it won't play like the other short ones. I made all of the short ones in the old compressor with the setting at .264 - 800kbs. This one has to download first completely before it plays even though I see the status bar moving.
The video is here http://www.barryherman.com/live-wedding-bands-nj-ny-pa.shtml
It is on the dropdown as "Cashmere latest dance music", close to the top. Notice how all the others play immediately.
thx

Maker sure 'Optimized for network use' (fast-start).
If you have Quicktime 7 Pro... you can fix it in Quicktime 7 Pro by doing a 'save as' in the MENU... FILE SAVE AS option. You can also do this in MPEG-Streamclip (free app.)
Open video in MPEG-Streamclip...
Menu...File...Save As...
Doing this you won't have to re-encode the video again and the fast-start will be added back to the video.
MPEG-Streamclip web page... http://www.squared5.com

Similar Messages

Mbp 15" does not start from set up disk

I formatted my MBP because it did not recognize the monitor, had to attach an extermal one to view image. Now, I cannot install the original OS because it does not start from set up disk. I was using OSX Lion latest version

Formatting the entire drive was rather excessive to solve a external monitor issue.
Likely a PRAM or SMC reset would have cleared it.
Step by Step to fix your Mac
10.7 Lion can only be reinstalled via the Recovery HD partition or via a external Recovery USB made in advance.
Hopefully the Recovery HD partition is still availalbe, hold the command and r keys down while booting (with a actve Internet connection cable attached to the router or modem) and see what happens. If you get something then format the Macinstosh HD partition in Disk Utility (GUID, OS X extended journaled) and quit, reinstall 10.7 from Apple's servers with your AppleID and password.
https://support.apple.com/kb/HT4718
http://osxdaily.com/2011/08/08/lion-recovery-disk-assistant-tool-makes-external- lion-boot-recovery-drives/
If not, then hold c or option key and boot from the 10.6 installer disk, use Disk Utility to erase the entire drive on the left and format same (GUID, OS X extended journaled) then quit and install 10.6, then log into AppStore and update to 10.7 again, the Recovery HD partition will be reinstalled automatically.
How to erase and install Snow Leopard 10.6
How to reinstall just OS X or erase/install OS X
If your attemtping to revert your 10.7 Mac to 10.6 then read this, it's a better explaination
How to revert your Mac to Snow Leopard
If your 10.6 disk doesn't work, then call Apple for a replacement disk.

ITunes 10.5 AirPlay does not stream from my pc to airport express or apple tv

Windows 7/32 bit, Time Capsule router (one WiFi system in home), Airport Express for music and all listed in Router DHCP assignments. All with the latest software. Before iTunes and iOS5 upgrade worked OK. Now no PC iTunes Airplay icon even though there is one on iPhone & iPAd 2 that shows AP Express and Apple TV choices. An older XP laptop with iTunes 10.2 also works OK. Uninstalled and reinstalled Airport Utility & Bonjour, Firewall includes iTunes and Bonjour allow entries. Now what?

Hi!
I have the same Problem (without Airport Express anyway), propably the problem is with 32-bit Windows 7. Similar problem that is with seting up Time Capsule with 32-bit Windows 7, you can find and use it but you can't change setings. I would love blame Windows but as Apple tries to make iTunes work with Windows it's hard to say who's fault it really is. They just don't like eachother...
Buy a Mac, (at least that's my solution)

Apple TV syncs but does not stream- Article: TS1447 not helpful

My content does not stream from my Mirror Door computer. I have read the article listed above but System Preferences, Sharing does not offer the firewall setup posted, even though it was posted December 08.
When I first set this up it worked fine now it syncs and does not stream. I have hard rebooted the Apple TV, I have disconnected it from my current iTunes and then went through the process of re-associating it with my iTunes. All are most recent versions. Everything works fine except for the portion of streaming from my computer. I have not a clue! Any ideas? Is there a preference file I should delete?
Setup: Mirror Door connected to the new Extreme N.
*The Sharing panel does not have a Firewall option.*
This is the article:
Apple TV: Data does not sync or stream after entering passcode
Last Modified: December 02, 2008
Article: TS1447
Old Article: 305287
Symptoms
Once you have entered the passcode from the Apple TV on your Mac or PC to establish a syncing or streaming connection, the sync or steam of content may not work.
Products Affected
Apple TV
Resolution
This can result from a firewall being enabled on your Mac or PC. If you have a firewall enabled, please make the following adjustments:
On a PC
Make sure the firewall is configured to allow TCP connections on port 3689. This will allow the transfer of content for syncing and or streaming to your Apple TV. If you use Windows Firewall, see "iTunes for Windows: Music Sharing With Windows Internet Connection Firewall " for detailed steps. If you use other firewall software, check the documentation for that software on how to open port 3689.
On a Mac
Open the Sharing System Preference (choose Apple > System Preferences and then choose View > Sharing).
Click on Firewall.
In the "Allow" field make sure the "iTunes Music Sharing" check box is checked. This will allow the transfer of content for syncing and or streaming to your Apple TV.
If you use other firewall or internet protection software, check the documentation for that software on how to open TCP connections on port 3689.
Note: If you use "fast user switching" on a Mac with firewall enabled you'll need to enable additional ports to allow streaming to Apple TV. If you don't, only the first user will be able to stream to Apple TV. For one additional user enable TCP port 49152. For each additional user, open the next incremental port (49153 for three users, 49154 for four users, 49155 for five users, etc.).
Follow these steps to add the necessary ports:
From the Apple menu, choose System Preferences.
From the View menu, choose Sharing.
Click the Firewall tab.
Click New.
From the Port Name pop-up menu, choose Other.
In the TCP Port Number(s) field, type in:
491452, 49153
This example allows for a total of three users. If you need more, enter the additional number(s) as described in the note above. If you need fewer, just enter the first number.
In the Description field type in: Extra Apple TV streams
Click OK.

Click on the greyed out library and a dialogue telling you the library is unavailable will appear with an option to disconnect, I haven't actually tried this since if it does what I think it does it will delete my registration.
You may want to try the 'change library' option I mentioned before for the synced library, it may avoid you having to resync everything over.
Sync and stream are initiated from different ends, streaming doesn't work because you have changed your libraries and the tv no longer recognises them. I assume you moved your libraries over to your new mac, when you sync from itunes it uses the info from before you moved it and of course the tv is still the same tv so itunes recognises it and it will sync.

With Front Row my music does not stream Airport Express

Since I upgraded the OS music does not stream from iMac to Airport Express. Direct from iTunes it does work.
How to solve?

Since I upgraded the OS music does not stream from iMac to Airport Express. Direct from iTunes it does work.
How to solve?

My iCloud is set up and seems to work. However, a newly added contact does not sync from the Macbook to the iphone and iPad. What am I doing wrong?

My iCloud is set up and seems to work. However, a newly added contact does not sync from the Macbook to the iphone and iPad. What am I doing wrong? Thanks, txstan

Apparantly it is, On My Mac contacts don't appear in iCloud, anywhere.
Put all your contacts on all of your devices in iCloud (assuming that's where you want them to be)
Go to www.icloud.com, login and see what you actually have in the account.

The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.

I recently moved from coldfusion 8 to coldfusion 9 but all the pages with cfgrid: is throwing the following error. Any suggestion would be of great help
coldfusion.jsp.JRunTagLibraryInfo$NoSuchAttributeException: The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
at coldfusion.jsp.JRunTagLibraryInfo.getPropertyType(JRunTagLibraryInfo.java:627)
at coldfusion.jsp.JRunTagLibraryInfo.buildTagInfo(JRunTagLibraryInfo.java:585)
at coldfusion.jsp.JRunTagLibraryInfo.getTag(JRunTagLibraryInfo.java:267)
at coldfusion.compiler.NeoTranslationContext.findTagName(NeoTranslationContext.java:346)
at coldfusion.compiler.NeoTranslationContext.isKnownTag(NeoTranslationContext.java:222)
at coldfusion.compiler.CFMLParserBase.isKnownTagName(CFMLParserBase.java:589)
at coldfusion.compiler.cfml40TokenManager.TokenLexicalActions(cfml40TokenManager.java:6704)
at coldfusion.compiler.cfml40TokenManager.getNextToken(cfml40TokenManager.java:6586)
at coldfusion.compiler.cfml40.getToken(cfml40.java:11879)
at coldfusion.compiler.CFMLParserBase.isTrivialAngleBracket(CFMLParserBase.java:707)
at coldfusion.compiler.cfml40.jj_3_1(cfml40.java:9392)
at coldfusion.compiler.cfml40.jj_3_2(cfml40.java:9460)
at coldfusion.compiler.cfml40.jj_3R_67(cfml40.java:9500)
at coldfusion.compiler.cfml40.jj_3_86(cfml40.java:8147)
at coldfusion.compiler.cfml40.jj_3R_92(cfml40.java:8584)
at coldfusion.compiler.cfml40.jj_3_85(cfml40.java:8641)
at coldfusion.compiler.cfml40.jj_2_85(cfml40.java:7619)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4215)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfif(cfml40.java:311)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.cfelse(cfml40.java:442)
at coldfusion.compiler.cfml40.cfelseif(cfml40.java:374)
at coldfusion.compiler.cfml40.cfif(cfml40.java:314)
at coldfusion.compiler.cfml40.cfml(cfml40.java:4224)
at coldfusion.compiler.cfml40.start(cfml40.java:4664)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:667)
at coldfusion.compiler.NeoTranslator.parsePage(NeoTranslator.java:648)
at coldfusion.compiler.NeoTranslator.parseAndTransform(NeoTranslator.java:401)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:343)
at coldfusion.compiler.NeoTranslator.translateJava(NeoTranslator.java:144)
at coldfusion.runtime.TemplateClassLoader$TemplateCache$1.fetch(TemplateClassLoader.java:418 )
at coldfusion.util.LruCache.get(LruCache.java:180)
at coldfusion.runtime.TemplateClassLoader$TemplateCache.fetchSerial(TemplateClassLoader.java :362)
at coldfusion.util.AbstractCache.fetch(AbstractCache.java:58)
at coldfusion.util.SoftCache.get_statsOff(SoftCache.java:133)
at coldfusion.util.SoftCache.get(SoftCache.java:81)
at coldfusion.runtime.TemplateClassLoader.findClass(TemplateClassLoader.java:591)
at coldfusion.filter.PathFilter.invoke(PathFilter.java:80)
at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:70)
at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8)
at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38)
at coldfusion.filter.NoCacheFilter.invoke(NoCacheFilter.java:46)
at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38)
at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22)
at coldfusion.filter.CachingFilter.invoke(CachingFilter.java:53)
at coldfusion.CfmServlet.service(CfmServlet.java:201)
at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:89)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:86)
at coldfusion.monitor.event.MonitoringServletFilter.doFilter(MonitoringServletFilter.java:42 )
at coldfusion.bootstrap.BootstrapFilter.doFilter(BootstrapFilter.java:46)
at jrun.servlet.FilterChain.doFilter(FilterChain.java:94)
at jrun.servlet.FilterChain.service(FilterChain.java:101)
at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:320)
at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:266)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

Thanks Vishu,
We are running Coldfusion 9 and attach is the sample code and error message.:
The tag handler gridcolumn does not have a setter for the attribute autoExpand specified in the Tag Library Descriptor.
The CFML compiler was processing:
A cfgrid tag beginning on line 39, column 18.
The error occurred in E:/Websites/DreData/sobrietytesting/main/Sobrietytesting/Admin/view_users.cfm: line 54
52 :                     hrefkey="member_id"
53 :                     bind="cfc:tabledisplay.browseAccessAcountRequests(,,,)"
54 :                     >
55 :

In 5s, personal hot spot does not work from time to time. Not detected

In 5s, personal hot spot does not work from time to time. Iphone does not get detected on Wi-fi or bluetooth. Restarting or rebooting does not help.

Settings, general, reset and reset network settings. Clear out your network settings and set personal hotspot again.
also avoid special characters making a password. hashtags or open brackets for example doesn't work too good.

Does not allow to set time characteristics while performing Partition

I had loaded the monthly inventory cube without setting any partition.
Now, when I tried to partition the cube thru RSDCUBE >> Change >> DB performance >> Partition, the time characteristic is greyed off and does not allow to set.
Is it becuase the cube had been loaded? Can I perform the partition now that I had compressed the request in the cube?

Yes you are correct....You want to modify an InfoCube into which data has already been loaded. You use remodeling to change the structure of the object without losing data.
You use partitioning to split the total dataset for an InfoProvider into several, smaller, physically independent and redundancy-free units. This separation improves system performance when you analyze data delete data from the InfoProvider.
You can only partition a dataset using one of the two partitioning criteria u2018calendar monthu2019 (0CALMONTH) or u2018fiscal year/period (0FISCPER). At least one of the two InfoObjects must be contained in the InfoProvider.
But you are trying to partition the cube which already has data so...You choose Repartitioning...
Repartitioning can be useful if you have already loaded data to your InfoCube, and:
●      You did not partition the InfoCube when you created it.
●      You loaded more data into your InfoCube than you had planned when you partitioned it.
●      You did not choose a long enough period of time for partitioning.
●      Some partitions contain no data or little data due to data archiving over a period of time.
Let me know if you need help with the steps to perform repartitioning

TS4080 apple thunderbolt display image on display intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys. Rebooting by pressing the power button resolves issue.

My apple thunderbolt display (which I purchased 1.5 years ago; OS 10.7.5 Mac Mini) intermittently goes dark, does not wake from sleep after clicking mouse or keyboard, but there is "bonk" sound after clicking mouse or pressing keys, so am thinking it is a hardware problem with the display. Rebooting by pressing the power button turns the screen back on, but the same phenomenon has occurred several times. Could this be a software issue, or do I need to have my display repaired? Your feedback would be appreciated.

Hi ED, tough to tell, but it does sound like it's waking with the bonk, just not displaying.
Long shot but...
I wonder if it's a variation of this, of which I've seen many different symptoms...
Resolution
Move the mouse or trackpad cursor over the center area of the login window so you can see the user icons. Click on the icon of the user that you would like to login as, type in the user's password, and press Return.
If the login window is configured to show only the name and password fields, type in the user's name and password into the fields, and press Return (even if you cannot see the rest of the login window).
Additional Information
This issue will not occur if the display is not sleeping when the account is logged out. Use the steps below to confirm that the account is not configured to log out automatically while the display is sleeping:
1. Open System Preferences > Security & Privacy > General. Click the padlock to unlock the preference pane and enter your admin password. Click the Advanced button at the bottom, then see if the option "Log out after N minutes of inactivity" (where N is the number of minutes) is enabled.
2. Open System Preferences > Energy Saver and configure Display Sleep to occur after the account is logged out, by dragging the slider to a number of minutes that is greater than N was set to in the previous step.
Important: If automatic log out is not needed, disable "Log out after Nminutes of inactivity" in System Preferences > Security & Privacy > General. This will also prevent the issue.
http://support.apple.com/kb/TS4135?viewlocale=en_US

Why won't cells autopopulate when using numbers on the ipad? Anyone have a fix? Have also created a dropdown menu, but that does not translate from excel to numbers either.

Why won't cells autopopulate when using numbers on the ipad as they will in excel? Anyone have a fix? I have also created a dropdown menu in excel, but that does not translate from excel to numbers either.

Glad you got it sorted out.
Diane123456 wrote:
> Thanks Vix, Joe, and Mad Dog for responding, the site is
in
> development so it's behind a password, which I probably
could share
> but MD is right, it was a margin issue. I didn't think I
needed to
> set a margin but I had to put a left margin of 2em on it
for the
> numbers to display on IE7 or IE6
>
> This is actually a rather common issue with CSS layouts
(it is not an
> issue with designs using tables) - there are several
posts for ULs
> which you may be interested in - see
>
>
http://www.adobe.com/cfusion/communityengine/index.cfm?event=showdetails&postId=
> 1981&productId=1&loc=en_US
>
> -- and once I got the numbers to show I ran into the
same problem as
> the commenters on the above thread, which noticed that
the vertical
> alignment doesn't work well with IE, and which noted
that apparently
> IE has a stutter because it just kept repeating "1" "1"
"1" -- so I
> finally went with a hanging indent and just put the
numbers in there
> manually - fortunately it's not a long list.... if you
have a fix
> for the stutter, or know of another place to get help
with CSS layout
> browser quirks please share -- if I find another one
I'll share also
>
> thanks again, Diane

HT4628 My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting.

My Wi-Fi connection on my iMac drops frequently. The other computers in the house do not have this problem. If I go into the Network Preferences and choose my Network it connects immediately but it does not remember the setting and I must reselect my network frequently.

The iMac picks up a wireless signal from the back of the screen, so you would want to avoid having it close to a wall, or in a confined area where the wireless signal cannot easily reach the iMac's antenna.
We don't know how far the iMac is from your wireless router, or how many walls or other obstructions might be in the signal path that would limit the quality of signal that the iMac receives.
Nor do we know whether you might have a cordless phone near the iMac, or whether you may be using a wireless keyboard and/or mouse....all of which can interfere with the wireless signal.
Can you provide some more info on this?

Deleting iphone email does not delete from computer

I am sure I must be missing something simple here....When I delete email from my iphone, it does not delete from my computer (either remotely or by syncing). So when I delete a bunch of emails, the very next time I open iphone email, it retrieves the very same emails just deleted....a viscious cycle. Can anyone assist with what must be a simple setting issue? Thank you.

Nathan C:
Thank you for your help.
When .Mac is configured using the .Mac option on the
iPhone it is always configured as IMAP. For that
account, on your computer are you checking the
messages via POP3, and on your computer, which
program are you using to check those messages?
.MAC Account - Home Computer: Under Mail/Preferences/Accounts it lists the Comcast account (from our ISP) as a POP and the .Mac account as ".Mac". I access mail thru Mac Mail Application and sometimes thru .mac thru the internet. Update on this account- I cleared the inbox and tried another test. Now it seems to be working. I delete a message from iphone and it will automatically delete from my home computer Mail App. and eventually it will be deleted from the .mac server when accessed thru the internet (these take much longer however). In any event it seem this account works now.
Work Account:
As for your work account, when looking at the
settings, it should say POP3, IMAP and Exchange at
the top. The button that is "pushed" is the one that
account is using. The outgoing server should
probably be smtp.comcast.net not smpt. Is that
account using IMAP, POP3, or Exchange?
I know these three options were there when the IT person set it up but now when I access this account in my iphone it does not tell me what was selected (IMAP,POP, or Exchange) under account information??? It seems to appear only when setting up a new account. Am I missing something?
Also that was a typo. Outgoing server is listed as "smtp.comcast.net"
So to give you as much info as I have:
Incoming Mail Server is "Mail.(officeservername).com" and Outgoing is "smtp.comcast.net". (Using my Comcast ISP was the only way the IT person could get the email access from Iphone to work). And to calrify what is happening on the iphone:
1.Email is accessed no problem from iphone, - downloading all new message from my work outlook works fine.
2.When I delete messages on my iphone, however, it does not delete on my office computer which is on a server network. (Visa Versa does work - when I delete a message on my computer it will delete it on my iphone.
3.NOTE : Contrary to what I posted earlier my iphone now is NOT "RELOADING" messages just deleted from Iphone but which remain on my office computer. This means half the problem is solved.
4. THE ONLY THING LEFT TO FIGURE OUT IS HOW DO I CONFIGURE SO WHEN I DELETE A MESSAGE ON MY IPHONE I AM DELETING ALSO FROM MY Computer at work?
(BTW in the above description I am referring to all wireless operation...not when syncing with iphone)
Any final helpful thoughts? Thanks again.

Dual Layer Disc Does not Play in Set Top DVD Player

Problem: Dual Layer Disc Does not Play in Set Top DVD Player
Solution: If your burner supports having its bitsetting changed, find a utility and change it to include DVD-ROM.
Additional Information:
DL (Dual Layer) is currently only a +R format. This is a serious problem, as you will find that on older players - and a lot of new ones - there is no +R support. It is not official, and therefore useless for any professional application.
By changing the bitsetting of your burner, it allows DLs (Dual Layer discs) to be burned with a book type of DVD-Rom and thus readable by many more players.
DVD player support drops off exponentially if your burner doesn't support bitsetting, allowing you to change the book type of your disc from DL to DVD-Rom. The DL book type will play on most newer software DVD players but not set top players.
If you've burned a dual layer disc without changing the bitsetting, it is a permanent semi-coaster as it will only play on your computer. I understand that newer DL burners are coming with firmware that automatically sets the book type.
Encore offers no control over book-type. My understanding is that this is a burner-specific parameter: some burners support allow themselves to be set and others do not.
Bitsetting (setting the Book Type) is specific to individual burners. There are some 3rd party software utilities out there that do a good job. The best thing to do is do a Google Search for your specific burner and find what works for yours.
LiteOn has a book type utility available for its DL burners:
I believe DVDInfoPro can set this on burners which support it.
Note: I would caution everyone who updates their firmware to check their bitsetting before burning DL discs. I don't know if it always returns to its default but it did in my case.
Bitsetting is done prior to burning the disk and generally only needs to be set once (unless like me, you update the firmware of your burner). The book type identifies to the player what type of disk is in it. Most players will play DVD-Roms with no problem. However, the book type of a DL disk is DVD+R DL as opposed to DVD-Rom and few players can read that.

Some general comments about the OP's several questions
Remember that reading a burned disc is not part of the original, core specification to play a DVD... so while most players do, now, they are really not required to do so to be able to play a replicated disc
This may (probably is) even more so with dual layer discs... the disc material is different, and a player that will happily read a replicated disc may have problems with a burned disc
There are many messages scattered in the forum, over the past several years, about brands of disc that are better... due both to overall quality control and the type of dye on the disc that is burned by the laser... with the bottom line being that not all discs are going to play in all players with 100% success
As for studio discs... there is software out there that costs many thousands of dollars which do many (up to 9?) encoding passes to get the best, and smallest, possible result to fit more on a disc

TS3276 My junk mail does not separate from my inbox.

I set up my email and unlike my old Mac, the junk mail does not separate from the inbox. Meaning it doesn't just go right to the Junk folder. How do I get it to separate? I use Gmail.
Also, how do I get my gchat to show up in my messages app? I have it set up but it doesn't show my connections
thanks

Go to Mail>Preferences>Junk Mail: check the settings

Does not Stream from setting in compressor 4.1

Similar Messages

Maybe you are looking for