"...does not support this type of alias."

I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
Thank you in advance,
Lloyd

Barry,
I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
Thanks,
Lloyd

Similar Messages

Error : software component version does not support this object type.

Hi ,
We are getting error as software component version does not support this object type when we try to create Business Object in PI 7.1 ESR .
How can we solve this error.
Regards,
Syed
Edited by: Umar Syed on Jun 11, 2009 12:01 PM

Hi Srinivas,
We are working on Modelling in SAP PI, but we are unable to create any Business Object.. is there any specific steps need to be followed.
Once we login to our ESR from index page we have this option to choose
Available Profiles :         Process Definition
                                   Service Definition
                                   Unregistered.
We are getting the option of new types (_Business Object_) only if we select Unregistered Profile and not in other Profiles . Is there some settings need to be done.
Regards,
Syed

[unixODBC][Driver Manager]Driver does not support this function {IM001}

Hello,
I start from the end and details show below - this error message i got in sql session:
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
If its ok and HS are licensed for SE, then please see details of my problem:
----OS and packages version
[oracle@aris_sv_db log]$ uname -a
Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ rpm -qa | grep odbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
[oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
unixODBC-libs-2.2.11-10.el5
unixODBC-libs-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
unixODBC-2.2.11-10.el5
unixODBC-devel-2.2.11-10.el5
[oracle@aris_sv_db log]$ rpm -qa | grep freetds
freetds-0.91-1.el5.rf
[oracle@aris_sv_db log]$
-----ODBC.INI, ODBCINST.INI and FREETDS.CONF
[oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
[ENERGOPLAN]
Driver = FreeTDS
Servername = ENERGOPLAN
Database = ess2
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/odbcinst.ini
# Example driver definitions
[FreeTDS]
Description = MSSQL Driver
Driver = /usr/lib64/libtdsodbc.so.0
#Setup = /usr/lib64/libtdsodbc.so.0
#Driver = /usr/lib64/libodbc.so
#Driver = /usr/lib/libodbc.so
UsageCount = 1
Trace = Yes
TraceFile = /tmp/freetds.log
[ODBC]
DEBUG = 1
TraceFile = /tmp/sqltrace.log
Trace = Yes
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ more /etc/freetds.conf
# A typical Microsoft server
[ENERGOPLAN]
host = 192.168.10.64
port = 1433
tds version = 8.0
# client charset = UTF-8
client charset = cp1251
[oracle@aris_sv_db log]$
----CHECK CONNECT from ODBC
[oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
| Connected! |
| |
| sql-statement |
| help [tablename] |
| quit |
| |
SQL> select count(*) from EnergyType;
| |
| 8 |
SQLRowCount returns 1
1 rows fetched
SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
locale is "en_US.UTF-8"
locale charset is "UTF-8"
using default charset "cp1251"
1> select count(*) from EnergyType;
2> go
8
(1 row affected)
1> [oracle@aris_sv_db log]$
----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
SID_LIST_ENERGOPLAN =
(SID_LIST =
(SID_DESC=
(SID_NAME=ENERGOPLAN)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM=dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
ENERGOPLAN =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
ADR_BASE_LISTENER = /u01/app/oracle
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
ENERGOPLAN =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
(CONNECT_DATA=(SID=ENERGOPLAN))
(HS=OK)
[oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
# This is a sample agent init file that contains the HS parameters that are
# needed for the Database Gateway for ODBC
# HS init parameters
HS_FDS_CONNECT_INFO = ENERGOPLAN
#HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
HS_FDS_TRACE_LEVEL = DEBUG
#HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
#HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
#HS_LANGUAGE=american_america.we8iso8859p1
#HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
#HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
#HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
#HS_LANGUAGE=Russian_CIS.AL32UTF-8
#HS_FDS_FETCH_ROWS=1
HS_NLS_NCHAR = UCS2
HS_FDS_SQLLEN_INTERPRETATION=32
# ODBC specific environment variables
set ODBCINI=/home/oracle/.odbc.ini
set ODBCINSTINI=/etc/odbcinst.ini
#HS_KEEP_REMOTE_COLUMN_SIZE=ALL
#HS_NLS_LENGTH_SEMANTICS=CHAR
#HS_FDS_SUPPORT_STATISTICS=FALSE
# Environment variables required for the non-Oracle system
#set <envvar>=<value>
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tnsping ENERGOPLAN
TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
OK (0 msec)
[oracle@aris_sv_db log]$
----CREATE DBLINK and test from sqlplus
CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
[oracle@aris_sv_db log]$ sqlplus / as sysdba
SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
Copyright (c) 1982, 2011, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
SQL> select count(*) from EnergyType@ENERGOPLAN;
select count(*) from EnergyType@ENERGOPLAN
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[unixODBC][Driver Manager]Driver does not support this function {IM001}
ORA-02063: preceding 2 lines from ENERGOPLAN
SQL>
----logs from hs and odbc
[oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
-7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
Free hoada @ 0x14e5fd20
Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
type:0
SQL text from hgopars, id=1, len=36 ...
00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
20: 22204131 [" A1]
Exiting hgopars, rc=0 at 2013/04/01-16:30:42
Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
hgoopen, line 87: NO hoada to print
Deferred open until first fetch.
Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
Allocate hoada @ 0x14e5fd80
Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
Entered hgopcda at 2013/04/01-16:30:42
Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
Entered hgopoer at 2013/04/01-16:30:42
hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
[unixODBC][Driver Manager]Driver does not support this function {IM001}
Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
Free hoada @ 0x14e5fd80
hgodscr, line 464: NO hoada to print
Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
Entered hgocomm at 2013/04/01-16:31:24
keepinfo:0, tflag:1
00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
10: 32322E37 363237 [22.7627]
tbid (len 20) is ...
00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
10: 312E345D [1.4]]
cmt(0):
Entered hgocpctx at 2013/04/01-16:31:24
Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
Entered hgolgof at 2013/04/01-16:31:24
tflag:1
Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
Entered hgoexit at 2013/04/01-16:31:24
Exiting hgoexit, rc=0
[oracle@aris_sv_db log]$
[oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
Native = 0x7fff6ca974f4
Message Text = 0x14e5f968
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_SUCCESS]
SQLState = IM001
Native = 0x7fff6ca974f4 -> 0
Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
[ODBC][12117][SQLGetDiagRecW.c][540]
Entry:
Statement = 0x14e399f0
Rec Number = 2
SQLState = 0x7fff6ca97700
Native = 0x7fff6ca974f4
Message Text = 0x14e5f908
Buffer Length = 510
Text Len Ptr = 0x7fff6ca97750
[ODBC][12117][SQLGetDiagRecW.c][582]
Exit:[SQL_NO_DATA]
[ODBC][12117][SQLEndTran.c][315]
Entry:
Connection = 0x14dbd4b0
Completion Type = 0
[ODBC][12117][SQLGetInfo.c][214]
Entry:
Connection = 0x14dbd4b0
Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
Info Value = 0x7fff6ca9781e
Buffer Length = 8
StrLen = 0x7fff6ca9781c
[ODBC][12117][SQLGetInfo.c][528]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLEndTran.c][488]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLDisconnect.c][204]
Entry:
Connection = 0x14dbd4b0
[ODBC][12117][SQLDisconnect.c][341]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][268]
Entry:
Handle Type = 2
Input Handle = 0x14dbd4b0
[ODBC][12117][SQLFreeHandle.c][317]
Exit:[SQL_SUCCESS]
[ODBC][12117][SQLFreeHandle.c][203]
Entry:
Handle Type = 1
Input Handle = 0x14dbb0c0
[oracle@aris_sv_db log]$

To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
- Klaus

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel

CS3 Could not complete your request because Photoshop does not recognize this type of file.

CS3 Could not complete your request because Photoshop does not recognize this type of file.   Also, all the jpg images I have open in preview only. The only thing I did different about the time these things changed, was upgrading to 10.6 on my mac. Hopefully I can fix this with your help! I really appreciate it in advance.
steeleart

This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
     Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.   It should.
    Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

"Exchange organisation does not support this version of Exchange server"

I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
I have already installed exchange Server 2010 in the that domain.
The following the image that show the error that i am facing
I have the checked current Active Directory or Exchange Server schema version by using
Using that i got the following information
"dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
objectVersion = Windows Server 2008 RTM
CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
rangeUpper = 14726 ( Exchange server 2010 sp1)
I am attaching the Exchange server setup logs here
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
[5/31/2013 3:04:28 PM] [0] **********************************************
[5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
[5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
[5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
[5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
[5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
[5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
[5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
[5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
[5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
[5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
[5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
[5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
[5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
[5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
[5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
[5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
[5/31/2013 3:04:31 PM] [0] The following roles are unpacked:
[5/31/2013 3:04:31 PM] [0] The following roles are installed:
[5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
[5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
[5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
[5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
[5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
[5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
[5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
[5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
[5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
[5/31/2013 3:04:32 PM] [0] Applying default role selection state
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
[5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
[5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
[5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
[5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
[5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
[5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
[5/31/2013 3:04:53 PM] [0] **************
[5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'
[5/31/2013 3:04:53 PM] [1] Beginning processing.
[5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:24 PM] [1] Ending processing.
[5/31/2013 3:05:24 PM] [0] **************
[5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
[5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
$true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'
[5/31/2013 3:05:24 PM] [1] Beginning processing.
[5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
[5/31/2013 3:05:27 PM] [1] Ending processing.
[5/31/2013 3:05:40 PM] [0] End of Setup
[5/31/2013 3:05:40 PM] [0] **********************************************
Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
Thanks

dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine install exchange 2010
Exchange organisation does not support this version of Exchange server
warning
setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
please can u tell me the how install exchange 2010
thanks

DataSource does not support requested type

hi,
i have a question about BI bean.
i use 9iDS 2 JDeveloper to create a JSP with BI beans.when i run this page,error message show in console window.like this:
Log : Current DataSource does not support requested type: DataMap.DATA_FORMATTED : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_RATIO : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
Log : Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE : oracle.dss.thin.beans.crosstab.CrosstabModelAdapter : setSupportedDataLayerFlags ()
what's this? my server is 9.0.1.3,olap patch 9.0.1.2 .
Thanks

Hi,
I have the same error occurring also. It happens when I try to drill down to a lower level within my BI BEANS application. As I am using a JSP to hold my BI BEANS this occurs on either a Bar Graph click or a Crosstab expension. I have both the Crosstab and the Graph linked.
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_FORMATTED
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_RATIO
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWFORMAT
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: DataMap.DATA_VIEWSTYLE
07/10/02 13:03 ftvApp: PROBLEM: In oracle.dss.thin.beans.crosstab.CrosstabModelAdapter::setSupportedDataLayerFlags () - Current DataSource does not support requested type: MetadataMap.METADATA_VIEWSTYLE
Regards,
Scott.

SAML Credential Mapper does not support credential type

Has anybody any idea on what could be causing the message below, which is being logged several times?
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
<[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <1309285937475> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): **SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null**>
Best regards
Update: Forgot to mention this is SOA Suite 11G environment
Edited by: user9501748 on Jun 28, 2011 11:53 AM

I've got the same issue too.
My setup is to have one domain acting as both Source and Destination.
For every 10 seconds, I'm seeing 4 of these logs, and the CPU consumption is 100% consistently.
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials: Subject initiator>
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentials(Subject): getCredentialInternal() called>
####<2-Jun-2009 11:00:27 o'clock AM EDT> <Debug> <SecuritySAMLCredMap> <MYHOST> <AdminServer> <[ACTIVE] ExecuteThread: '18' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1243954827839> <BEA-000000> <SAMLCredentialMapperV2: getCredentialInternal(): SAML Credential Mapper does not support credential type: weblogic.UserPassword, returns null>
Does anyone know what's happening? I've got one of the Security Provider = Active Directory, and thus there's no password returning. Could it be the root cause of the problem?

Error: Driver does not support this function

Hi there people!
I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
<%@ page import = "java.sql.*" %>
<%@ page import="java.io.*" %>
<%@ page import="java.util.*" %>
<HTML>
<title>Stock Portfolio</title>
<body>
<body bgcolor="gray"><center>
<table border = 1>
<tr>
     <td><th>Symbol</td></th>
     <td><th>Type of Transaction</td></th>
     <td><th>Date</td></th>
     <td><th>Shares</td></th>
     <td><th>Price</td></th>
     <td><th>Stock Commission</td></th>
     <td><th>Stock Brocker Name</td></th>
<tr>
<%     String symbol = request.getParameter("symbol");
       String type = request.getParameter("type");
       String date = request.getParameter("date");
        String shares = request.getParameter("shares");
        int ishares = Integer.parseInt(shares);
        String price = request.getParameter("price");
        float fprice = Float.parseFloat(price);
        String commission = request.getParameter("commission");
        float fcommission = Float.parseFloat(commission);
        String bname = request.getParameter("bname");
%>
<% String url ="jdbc:odbc:Product";
   try
   { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
     Connection con = DriverManager.getConnection(url,"","");
     String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
      PreparedStatement pstmt = con.prepareStatement(query);
      pstmt.setString(1,symbol);
       pstmt.setString(2,type);
       pstmt.setString(3,date);
       pstmt.setInt(4,ishares);
       pstmt.setDouble(5,fprice);
       pstmt.setDouble(6,fcommission);
       pstmt.setString(7,bname);
       pstmt.executeUpdate(query);
      }catch (Exception e)
       {System.out.println(e.getMessage());
%>
</body>
</html>      Thanks!

Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
[http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
Read reply #5.
It says
You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck.

I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there.
searching the internet i found a link to upgrtade to 10.7
The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
Regards.

Error: 28005, Severity: 16, State: 2...An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impe

I've seen some similar questions, but want to make sure I can get an answer quickly and how to fix.
Thanks,
Paul
spid24s Error: 28005, Severity: 16, State: 2
spid24s An exception occurred while enqueueing a message in the target queue. Error: 15517, State: 1. Cannot execute as the database principal because the principal "dbo" does not exist, this type of principal cannot be impersonated,
or you do not have permission.

Hi Paul,
I also had the same error on one of my servers, and it was because the user that created the database no longer worked for the company.
So when his AD account got deleted, the database had NULL as owner
Using the following query I asked for the owners of the databases:
select name, suser_sname(sid) from master.dbo.sysdatabases
So changing the owner of the databases that had a NULL owner solved the issue for me.
use <databasesname>
go
exec sp_changedbowner 'sa'
Thanks for triggering the solution.
Peter

Hp the system recovery media does not support this computer, WIN7 GS72 Notebook

HProduct: GS-B66US (17" I3 notebook)
OS: Win7
Bios Rev: F.47
Error message: "hp the system recovery media does not support this computer. You are not able to restore this system"
Changes made to system: Updated bios (I think).
Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios). After booting from the first recovery disk I get the following message
"hp the system recovery media does not support this computer. You are not able to restore this system with the media"
The computer still boots with the old hard drive (with drive failure imminent messages) I do see support assistant offering another bios update but I did not install it with the hard drive problem
PLEASE HELP
TIA

Hi,
I think there could be two possible reason. wrong media or systemboard is changed.
did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
media created on some other computer (same model) may not work on your computer.
you can order the media from hp.com here.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
hope it helps
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Strange IE ExternalInterface Bug: "Object does not support this property or method"

We have an application on a relatively slow server (I mention
the speed because it may be relevant).
The app is flash 8 and uses ExternalInterface to call a
javascript function in its parent page. It also used the
ExternalInterface to receive a call from another function. These
calls happens separately (the outbound one calls up a list view of
items, clicking on an item calls up the details in the flash
movie). In between the calls, the flash movie is hidden by moving
it off screen using absolute positioning.
On my local development box (Windows XPSP2) this works fine
in both directions.
On our production server (LAMP) this works fine in both
directions in Firefox 1.5 and 2.0
BUT while the outbound call from Flash to the page works fine
in Internet Explorer 6 or 7, the call back from the page to the
flash movie fails with the error messgage "Object does not support
this method or property"
We've tried not hiding the flash so it is always present on
the page and still the browser > flash communication breaks in
ie.
We've tried using both the Adobe active content script and
swfobject to embed the flash in the page with no difference in the
resultset. In truth we've given up and gone to a two-page solution,
reloading the flash from the start each time but I wondered if
anyone had encountered a similar issue? Can't see why it would work
perfectly in FF but not in IE.

Not sure if this is your problem, but you do reference the
Flash object
differently, depending on the browser. In a video player we
made, that uses
JS to communicate back to Flash, I use a function like this
to modify the
variable depending on the browser:
function changeVideo(xname){
//ff
if(window.vplayer){
window.document["vplayer"].SetVariable("theXML", xname);
window.document["vplayer"].GotoFrame(2);
window.document["vplayer"].Play();
//ie
if(document.vplayer){
document.vplayer.SetVariable("theXML", xname);
document.vplayer.GotoFrame(2);
document.vplayer.Play();
The Flash is in a <div> named 'vplayer'
Dave -
Head Developer
http://www.blurredistinction.com
Adobe Community Expert
http://www.adobe.com/communities/experts/

"Could not complete your request because Photoshop does not recognize this type of file."

I am using the latest version of Photoshop CC. When I attempt to open a recent .psd file listed in the Open Recent list, I get the message "Could not complete your request because Photoshop does not recognize this type of file." I can use the open command to open these files with no problem. The files are not damaged or missing the .psd extension and open normally except when using the Open Recent menu. OS is Mac 10.8.5. Thanks for any clues as to a fix.

As weid as it may sound: simply don't use "Open recent...". Use Bridge to manage, find and start them in PS.

HT2404 I can't open downloads from my e-mail I get the message: Could not complete your rrequest because Photoshop does not recognize this type of file.

I can't open downloads from my optonline e-mail.
I get the message: Could not complete your request because Photoshop does not recognize this type of file.

So what type of files are they?!

"...does not support this type of alias."

Similar Messages

Maybe you are looking for