Does not switch on

I was listening to music on my ipod nano, suddenly it switched off and since then its not switching on. ried every method, connected with power supply, computer but still not working.

First step would be to try resetting it.
Hold down the voume down and sleep/wake button at the same time until you see the apple icon.
i

Similar Messages

  • My Mac Pro does not switch off.

    It worked before Lion. Installed 10.7 and also upgraded to 10.7.1 but, on both cases, it does not switch-off. To be precise it "sometimes" switch-off but many times it does not. Let's say once on 15 times... With Leopard I nevere had this problem. (it persists also after a PRAM reset). I also run a second problem but only once and only upgrading to 10.7.1 (not to 10.7). It says that my RAM was on wrong position.. I had to remove and install the RAM again and it worked.
    Any other case like this? (This append only on my MacPro - early 2009. On my MacBook and my MacBook Pro OSX Lion works fine).

    Is there a pattern to the chimes, or are they simply random, as if the Mac is repeatedly rebooting on its own?
    Have you tried a "Safe Boot"? Press and hold a Shift key as you power up the Mac. Does it start then?
    If it starts at all "Safe Boot" will take much longer than usual, that's normal. Shutting down will take longer also. Try it.

  • During audio messaging the send button does not switch to  a microphone after selecting a contact

    During audio messaging the send button does not switch to a microphone after selecting a contact

    Actually, this problem is the same as the one described in your other thread, and should be fixed as well after following the procedure described there.

  • The off button does not switch to 'hibernate' or lock when playing music.

    The off button does not switch to 'hibernate' or lock when playing music. I have to hold the off button down
    for a prolonged period of time to get it to switch off; have had to resort to holding the off button and the main
    button simultaneously to reset but no improvement.

    - First try restoring the iPod from backup via iTunes.
    - If problem persists, restore to factory defaults/new iPod.
    - If still a problem than you likely have a hardware problem and an appointment a the Genius Bar of an Apple store is in order.

  • "Fn+F5" does not switch the wi-fi in G410m-mm

    Hello!
    "Fn+F5" does not switch the wi-fi in G410m-mm. How to make the shortcut work? All drivers and utilities are installed.
    Regards,
    Dmitry

    skripatch wrote:
    I suggest another driver for cardreader or maybe you're trying to use SDHC cards instead of SD.
    I doubt that you'll be able to return it in MM after 20 September.
    Due to Russian law suite after two weeks you can only return it in case of unrepaireable malfunction. If you hurry up right now you can come in time. 
    Thanks skripatch for your opinion!
    I tried with both drivers: from the driver CD and from the site. The cards are readable in the G410 through an external USB reader. The cards are not SDHC, they are 64mb and 2gb miniSD cards in a SD adapter. I bought the G410 on September 25, not 20. Why can I "come in time right now", but not between September 20 and 25?
    Regards,
    Dmitry
    Message Edited by di on 09-16-2008 02:45 AM

  • Imac does not switch on anymore

    My new imac does not switch on anymore.no signal,simply.no procedure worked(command plus alt plus p plus r or whatever

    Contact AppleCare... you have 90 days Free Telephone Support and 3 years if you Purchased AppleCare...
    Apple Contact USA
    http://www.apple.com/contact/
    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57

  • After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    After upgrade to Yosemite my MacBook Air does not switch automaticly from wifi to ethernet. How to sloven problem?

    Have you tried changing the order in Network Preferences pane?
    Open System Preferences/Networks/Click the gear symbol under the service list. Select set service order then drag. If your wifi is above the ethernet move the ethernet to the top. Click ok. Click apply (bottom left) and test.
    Hope this helps
    PJRS

  • Middle click on search suggestions in Search Bar does not switch to new tab

    I use profile option "When I open a link in a new tab, switch to it immediately" = yes (check marked)
    Middle clicking on a search suggestion in the Search Bar does open a new tab but Firefox does not switch to it.
    This feature used to work for many years until very recently.
    Anybody have any ideas?

    Did the problem start with the new search bar design in Firefox 34?
    If you want to switch back to using the old bar, it's still hidden inside. Here's how you would do it:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box that appears above the list, type or paste '''search''' and pause while the list is filtered
    (3) Double-click the '''browser.search.showOneOffButtons''' preference to switch it from true to false
    This doesn't affect the current window, but each new window you open (Ctrl+n) will have the old Search bar.
    I'm not sure when that will be phased out...

  • HELP! My MacBook Air does not switch on at all

    My MacBook Air does not switch on at all. I press the "switch on" button but nothing happens. The battery is fully charged and the laptop is absolutely new (2 month of rare use). Have no idea what's wrong with it.
    Thanks in advance.

    Hi Aliyusha,
    welcome to the forums. I'm sorry to hear about your computer issues.
    Do you get a chime? dose the sleep led turn on or blink? What about the led on the power adapter, that LED on or off?
    Apple Portables: Troubleshooting MagSafe adapters
    http://support.apple.com/kb/TS1713
    Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/ht3964

  • AT270 does not switch on

    Hello,
    my appr. 2 year old at270 has "problems to switch on" since some time (Display stays dark although the buzz tells the tablet reacts). I thought I might have software problems and resetted.
    Now it does not switch on at all, but maybe this is not completely true, because attaching the tablet via usb to my Desktop the Explorer shows its directory.
    Do I have a hardware problem ???

    > Do I have a hardware problem ???
    It looks so
    You could try to perform hard reset pressing and holding the power button and volume up button.
    Usually this enables the advanced menu where you should be able to choose the reset option.

  • ThinkCentre Edge 71, Power LED does not switch off

    Since I have installed win7 64bit, the pc does not switch off after Power down command. For switch off i must hold the power button >10sec.
    Thanks for Help.

    Hello Walter,
    Please update the BIOS which will resolve the issue.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkcentre_bios/9qjy36usa.exe
    You may also try the Windows registry setting. Kindly be careful while editing windows registry.
    Have a look at the following registry location (note that you need to invoke regedit.exe with administrative privileges in order to make any changes in this location) and ensure that the value ClearPageFileAtShutdown is set to 0 (if it is set to 1, change the value to 0).
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management
    Best Regards,
    Tanuj
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Mission Control: Application Does Not Switch To Assigned Desktop Once Open

    I have Adobe Photoshop CS5 assigned to DESKTOP 2 in Mission Control. If Photoshop is closed, and I launch it from the dock or Launchpad, Lion switches to DESKTOP 2 to launch Photoshop. This is what I want.
    However, if Photoshop is already open and I click on an image file in Adobe Bridge, or Finder, Lion does not switch to DESKTOP 2. Photoshop will launch on whatever desktop I am on, in front of Finder or Adobe Bridge.
    I have experienced this when I have "Automatically rearrange spaces based on most recent use" and "When switching to an application, switch to a desktop with open windows for this application" on or off. Both settings seem to have the same problem.
    Is anyone else experiencing this? Any suggestions? I used this feature extensively with Spaces, and Lion is killing my workflow unless I can get this figured out.
    Thanks!!

    Wait DONT reinstall yet!!! there is a switch for this:
    I bet yours is toggled the wrong way.
    Message was edited by: coocooforcocoapuffs: never mind, did not read your post properly.

  • Dictation does not switch language

    When I hit the language icon in the menu bar, it does not switch language like my ipad does.   Is it possible that the ipad has more functionality than the mac book pro?

    OS X and iOS are totally different is this area.  The language icon in OS X only changes the keyboard, nothing else.  Dictation language is set in system preferences.  But there is also an easier way
    http://fouquet.me/apps/dictationswitcher/

  • HT201436 I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    I have an iPhone 4s and have set up with my provider for voicemail. however, when called my phone does not switch to voicemail. How do I set the phone to transfer to voicemail when not answered etc?

    Voicemail is a carrier feature, not a phone feature. This has to be fixed by your carrier, so contact them, as obviously, voicemail is not properly provisioned on your account.

  • Satellite 2410-303 does not switch on

    Hello there,
    we have a system here on the bench with the following problem:
    - system does not switch on
    - with battery inserted power LED keeps on blinking in yellow
    - connected to mains power LED keeps on blinking in yellow
    - no sound of fan or spinning HDD
    - no other LEDs come on
    Any ideas?
    Tia
    W. Pfiffer

    There is no much to say. I presume blinking LED sends a code. Sorry but I am afraid there is nothing to do. Contact authorized service partner and let them check board electronic.
    There is probably some problem with power supply electronic.

  • WiFi issue: Is it possible to change WiFi settings in a way that it does not switch off in the screen-lock mode?

    I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important!  Is there a way to change this setting?

    The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
    There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
    By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc.

Maybe you are looking for