Does notes - highlightings - else's syncing work for you?

Today I imported an ePub I was already reading on my iDevices into iBooks for Mac, glad to keep reading from the same point and to highlight, insert notes and so on.
To my dismay, the book opened right but everything was missing: no notes, highlighting and so one.
I double checked everything but nothing to do.
In particolar, I went through this: http://support.apple.com/kb/HT5826
I checked my iDevices and everything seems ok. As a matter of fact, everything on that same ebook syncs well between iPhone and iPad.
I tried inserting new highlightings in both iPhone and Mac to maybe refresh syncing but nothing to do. It is just as if they were two different books.
So, what gives?
Syncing is the only reason I installed Mavericks and switched to iBooks for mac as a reader.
Is your mileage like mine?
Thank you.
Tiziano Solignani

A very few have had continuing problems. I have not seen a solution.

Similar Messages

Does the "dont recalculate images" option work for you?

Hi all,
has the option to not recalculate imported images (see screenshot below) worked for - ever? If selected, and with an image size of 100%, RoboHelp should just use the same original referenced images without changing anything. Yet RoboHelp always generates them new with absolutely inacceptable image quality, no matter what settings I use.
The image import has always been awkward in all our documents, despite using any solutions or proposals I found on the net.

EDIT: invalid question.. answer was in your last post...
Message Edited by JoeLabView on 09-20-2007 07:45 AM

Using Windows 7, Firefox does not allow a script to work for an online counter that worked fine on Xp. It works fine in IE with Windows 7.

On several websites, there is an online counter that shows the count, but now that I have Windows 7 it doesn't show the count. IE shows it but not Firefox. It worked fine in XP.

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
See also http://kb.mozillazine.org/Images_or_animations_do_not_load

Mac pro will not reconize external speakers. quit working for no reason

mac pro does not reconize external speakers. quit working for no reason

Try an smc reset.
Check Audio MIDI Setup (in Utilities).

Drawing with a custom profile stroke is not working for me. Does it work for you?

Drawing with a custom profile stroke is not working for me. Does it work for you?
I can only apply it on an existing stroke but can't draw a new one with the selected profile. In fact if I change the profile to other than the default Uniform I also can't draw a new stroke with any other width than the default 1 point. This doesn't seem normal.
Using SC5 on a PC.

Another question on the same topic.
Once I add a new profile to the list is it possible to put it on top of the list. I need this because the Adobe people decided to put the list in a tiny scrollable window with only a few of the first profiles showing. If there is noting in the interface may be I have to modify some program files settings?

IGNORE this since I can not DELETE IT - Your browser does not support cookies, which are required for this web server to work in session authentication mode

Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE

Error - No cookies
Your browser does not support cookies, which are required for this web server to work in session authentication mode
This is a NOSCRIPT PROBLEM and NOT a Firefox problem.......
when disabled it works JUST FINE

Macbook Pro does not start up and nothing works. Need recovery!

Hi there
My MacBook Pro has shut down while wathcing a video and when ever I try to start up, a sign looking loke"no parking (Prohibitory Sign)" comes up after grey screen.
I tried to start it in safe mode but it does not go in safe mode.
Tried pram and nvram reset pro but didnt help.
Succesfully started in recovery mode ( tried both cmd + R and Cmd +opt+ R) tried disc repair but it cannot repair or verify anything. it gives me errors.
Could not recover anything in here as could not find any back up.
Tried to re-install Maveric but could not see HDD, so could not go ahead.
Inserted OS X installationCD that came with laptop, stared up by holding C, tried to repair disk but again, could not repair disk.
Could not do anything in Terminal.
I cannot even erase and re-install the OS
I also had windows 7 installed but now I cant start it up aswell.
The question is, what else I can try to save my computer? More importantly, I have so many pictures I want to save. How can I save them?
Thanks in advance!
Memis.

Based on the procedures you have tried and the symptoms you have described, your MBP internal HDD had failed and will need to be replaced.
If you have a backup, your data should be available to you when you install the new HDD. If you do not have a backup, you may try to see if any of the data recovery software available online will work for you. Most have a trrial version that will tell you if they can be of any use for you or not. The last option is to engage the services of a data recover firm. They will not guarantee if they can get any or all of your data and will be very expensive.
Ciao.

HT204053 I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized. Any suggestions?

I changed my apple id, but my ipad does not allow me to change it for Icloud, so I can't edit my account so I can access Icloud. I was told at Apple store that I could use both Apple ids, but my old one is no longer recognized on the appleid website, so my password for my old apple id won't work.
Any suggestions?

If you only changed the name of your ID rather than creating a new ID, just go to Settins>iCloud and tap Delete Account then sign back in with the new name. (Deleting the account from your phone does not delete it from iCloud. Your data will be synced back to your phone when you sign back in.)
If you created a new ID, you'll have to go to Settings>iCloud on your phone and turn all data you are syncing with iCloud (contacts, calendars, etc.) to Off. When prompted choose to keep the data on your iPhone. (If you are syncing iWork documents with iCloud, also open your iWork apps and turn off iCloud syncing and choose to keep the documents on your phone.) After everything is turned off, scroll to the bottom and tap Delete Account. Next, set up a new iCloud account using your other ID, then turn syncing for your data (contacts, etc.) back to On. When prompted, choose Merge. This will upload the data to your new account.
You won't lose any photos in your camera roll or photo library. If you have any photos in your photo stream that are over 30 days old that are not in your camera roll or saved on your computer, be sure to save these to the camera roll before deleting the account. To do so, open the photo stream album on your iPhone in the thumbnail view, tap Edit, tap all the photos you need to save to select them, tap Share, then tap Save to Camera Roll.

The material does not exist in plant or flagged for deletion

Hi All,
I have done the integration of R3 back end with SRM system (SRM 5.0) Classic scenario is working fine.
In the direct Material Procurement I get an error message that "the material does not exist in plant or flagged for deletion".
I checked R/3 side material is active only and I have assigned plant in extend attributes.
Can you please help me to resolve this problem..
Thanks
Ravi

Hi Ravi
check you validit date from and to for that material in comm_product table.* if it is valid you can do shopping or else you cant.
regards
Muthu

SOLVED - BIOS UPDATE "SYSTEM DOES NOT CONTAIN the NECESSARY WMI SUPPORT for this VERSION of HPQflash

If you get infamous error when updating HP Portables (laptops/notebooks/ netbooks) BIOS within Windows:
"SYSTEM DOES NOT CONTAIN THE NECESSARY WMI SUPPORT FOR THIS VERSION OF HPQFLASH":
I am posting a solution found for own business laptop (HP 8540W & 8760W) so WebSearch engines index/register it in a few days - future sufferers come here and get a SOLUTION, finally. Disreagrd previous "experts" advises, they don't work 100% & pity on TechSupport folks who get HP paychecks yet don't know products their co. designs/manufactures (on deep Technical level):
Below is a SOLUTION (WORKING) !
Go into Services (Run "services.msc" or get there thru ControlPanel-->AdminTools-->), find following 2 services ==> make sure they're running, chances are they're NOT (as in my case I keep them disabled unless need running):
1) "HP Software Framework"
2) "HP Service" [no typo - a real plain name]
If not running, set Properties-->Manual and click "Start", make sure both are running.
Rerun BIOS updater, choose option for "Within Windows" or something to that effect (using HPQ/ROMpaq updater), rather than "create USB BootDisk on Key", this time it should work without the hassle of a BootDisk creation.
Should work from within Windows environment.
Notes:
a) Likely only one (1) service is responsible - namely "HP Software Framework" for HPQ Updater to fail, but doesn't hurt to reenable/restart both services.
I in fact am responding to other customers who elect to Update BIOS within Windows, perhaps oldfashioned but to me Boot Updater is more natural & always works regardless of WMI Support.
b) After done, don't forget:
*) Recheck BIOS settings - update may've added new and/or changed old, so rescan tobe sure.
**) Go BACK into Windows-->Services.msc & redisable both aforementioned Services if were originally disabled; or you're a computer Pro, you know what you're doing & like me keep all HP services disabled. The ones we got on EliteBook 8760W are pests consuming system resources, you just enable "Software Framework" when occasional issues emerge with HP softupdate (typically no issues) & redisable after use, rest of services are bloatware - some attempt to overrun Windows Wireless console, some seekout HP Networked printers (Ethernet, Wireless, but not USB), some do this & that - I study/know which one does what and decided to disable all. This is called a "minimalist" philosophy & turns your machine into a fast beast, I recently sold a very obsolete 4-year laptop which however handles 3DMCAD & complex designs/simulations, better new machines out fo a store, as new machines are loaded w/bloatware chocking down resources.
BUT nobody is requiring you to disable anything though.
The solution merely states the fact:
These 2 (or 1) services when not running halt BIOS Update "within Windows" (you can still run "BootDisk option", however, if preferred).
Simply restartung them solves your problem. Usually
Ya'll have a good day and enjoy!
===========
BELOW ARE IMPORTANT WARNINGS:
1) IF YOUR BIOS UPDATE STILL FAILS, SOME OTHER PIECE IN WMI SUPPORT IS MISSING - IN MY CASE WAS THESE 2 SERVICES, BUT THERE'S REMOTE POSSIBILITY SOMETHING ELSE MIGHT BLOCK UPDATER. DON'T WASTE TIME & CHOOSE "USB/BootDisk" options instead
2) Once BIOS updater does its job, will ask to auto-restart - let it go on & complete, it will self-shutdown (click "Next" to skip 60-second timer), then do NOT turn it on manually!, wait - it'll turn on by itself in 15 seconds, let it boot into Windows, you're done!
3) WARNING: close other apps before proceeding, be 100% sure your ACpower won't be interrupted or better yet - make sure battery is in/charged (so if ACpower accidentally disconnects, you're autoswitched onto battery) b/c power loss may result in severe damage to internal hardware. In the old days it'd result in fatal damage, these days powerloss would still result in a major repair (ROM chip corruption).
So to summarize: those 2 services I specified, are often responsible for whether HPQ/ROMpaq will or won't run.
Other causes possible, but I've not witnessed; and if so - choose BootDisk option.
===
Stan M. Starinski, MSEE.

Hello Ceramics.
Your ProBook is an Enterprise model. It would be a good idea to also post your question to the HP Business Boards as those forums deal specifically with that kind of product. Here is a link.
Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Itunes does not allow me to sync music with iphone?

Itunes does not allow me to sync music with iphone?

Have a similar issue. Have iphone 4 running ios7. itunes 11.1.3.8. Probably is intermittent (once every 2 weeks?) and persistent. Syncs fine for days. Then all at once playlists are not updated. For example; over the holidays I added some holiday songs to a playlist. Today I removed the holiday songs from the playlist in itunes. Sync the phone. All messages indicate sync is successful. Songs still in playlist on the phone! Continues to happen over multiple syncs. In the past I have had some songs update but not all songs. This cycle of attempting syncing continues until other songs on the iphone 'disappear' (they are listed in playlists but don't play!). Don't know the cause but it is very annoying and unpredictable. Eventually taking all music off the iphone and then adding it back works but even this take multiple iterations. These issues seem to have started after upgrading to ios7. I have workarounds that are very timeconsuming. I'm interested in solutions to the root cause. Can anyone help?

Does iTunes in the cloud only work for purchased music?

Hi,
I was wondering, does iTunes in the Cloud only work for purchased music?
Also, does the automatic wifi sync feature not sync everything that it would if you manually iniate the wifi sync? The reason I ask is because my iPhone is often connected to my charger, and then today I decided to perform a manual wifi sync and it had a lot of content to update, definitly way more than any changes I've made since I plugged it in to the charger last night.
Thanks,
Brandon

Hi Brandon ...
You can turn on Music, Apps,and Books by tapping Settings > Store
Connecting your iPhone to a wall charger should not have any effect on sycning.

ITunes installation error: does not have program associated with it for performing this action

Repeated tries to install iTunes continues to fail. Installing on Acer laptop using Windows 7.
Error: does not have program associated with it for performing this action
We have done the following: open Default programs, clicked associate a file type, clicked on change program button and selected a program to open with and clicked OK/enter.
The installation continues. we get to the finish window; click finish.
Next error: iTunes has been installed incorrectly.
So, what do we do to get iTunes working?
Thank you.

Hi normeagle,
Welcome to Apple Support Communities.
You may find this article helpful for troubleshooting your iTunes installation:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Best,
Jeremy

Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID:

Expert,
I did the following steps to upgrade the OWB repository from 10g to 11g
• Created a dummy workspace in the 11.2 repository
• Created users in the destination environment
• Run Repository Assistant against the 11.1 source database
• Then selected *“Export entire repository to a file”* and selected the MDL(10g) to import
After 99% of completing I have got the below error
Error ACLContainer: 65315 does NOT EXIST in the Object Cache for parentID: 65314
Please let me know the solution.
Thanks,
Balaa...

Hi I had the same error and worked on it for almost a week with no success but there is few work around for this try it it might work for you.
Step 1>Run a health check on OWB 10.2 enviroment(make sure you clone your OWB 10.2 enviroment and then do this healthcheck ,these checks are tricky )
refer
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
This will give you info about your missing ACL
Step 2> download these two scripts fixLostACLContainer.sql ,fixAllACLContainers.sql
please refer :
Note 559542.1 Health Check of the Oracle Warehouse Builder 10.2 Metadata Repository
OWB 10.2 - Internal ERROR: Can not find the ACL container for object (Doc ID 460411.1)
Note 754763.1 Repository Cleanup Script for OWB 10.2 and OWB 11.1
Note 460411.1 Opening Map Returns Cannot find ACL Containter for Object
Note 1165068.1 Internal Error: Can Not Find The ACL Containter For for object:CMPPhysical Object
It might resolve this ACL issue but it did not work for me.
If none of these work then
Perform export from design center of OWB 10.2 and import through design center of OWB 11.2.(ONLY OPTION)
It worked for me.
Varun

Adobe Download Assistant does not begin or give an option for InCopy trial download

I've downloaded the Adobe Download Assistant four times. It does not immediately begin my InCopy trial download, and there is no option within the assistant to begin this download. (I only want InCopy, not InDesign). What now?

The download will be initiated from http://www.adobe.com/cfusion/tdrc/index.cfm?product=incopy&loc=en_us and wil still utilize the Adobe Download Assistant. If this is not working for you then please try a different web browser.

Does notes - highlightings - else's syncing work for you?

Similar Messages

Maybe you are looking for