Does obiee 11g supports XSL format

Dears,
Does Obiee 11g supports XSL style sheet files? Some of the legacy reports are using data which are pulled from the database and formatted via XSL and some are generated from XML/XSL files?
I have looked at XML connection pool, it only supports importing XML format as source file.May be I am wrong? I do not have great hands on BI publisher.
Thanks,
Uday

Hi Uday,
If I understand correctly, XSLT is mostly about parsing through the XML and presenting it to the user in some format with colors,fonts etc (Just like CSS).
So in case of OBI,
1.It can read the data from the source XML documents itself (Doing the job like of XSL Parser)
2. Present to the users in the format you need (Doing the job of XSL Renderer).
So, you just give BI the source data in the form of XML, design the metadata as per your business needs and the OBI Presentation Services component can do the job of presenting.
Hope this gives you some idea of BI just working like XSL.
Thank you,
Dhar

Similar Messages

Does SAP DMS support EML format

Does SAP DMS support EML format, and how can I make it work?
I know I may need to add a new workstation applications for EML in DC30, but I don't know the detailed settings for e.g: mime-types and viewer configuration, etc. Can anyone help?

Hi,
generally you can define a workstatiosn application for any file format. If the format has an extension with more than 3 characters please set the flag "You cannot rename...." in transaction DC30 to avoid problems.
Regarding the mime-type field I have to say that this is recommended by not really mandatory. Normally you should find the correct mime-type for the file format in the Internet.
In DC30 I would also recommend you to use the parameter %AUTO%%NO-LEAVE% at "Define workstation application in network". With this parameter the EML files will be opened in an external application.
In the field "file format" you just have to enter the value '*.eml'.
I hope that this information could be usful.
Regards,
Christoph

OBIEE 11g default pivot formatting changes

Hi, in OBIEE 11g, there are several default pivot table formatting options that we would like to disable - I don't want end users to have to do this manually:
#1 - All cells that are not in the "Measures" area have a default tan background applied to them
#2 - All cells that are not in the "Measures" area have a "fade" color that gets dark near the bottom of the cells
Does anyone know how to disable these?
Thanks!
Scott

I did not get a chance to work on 11g yet, which is really not good :), but I am guessing you can do this by conditional formatting as in 10g. If you want to custom format a column/heading you can do it by formatting/conditional formatting. If you talking about the OOTB colors, then you might have to edit CSS files.
Sorry dude..I wish I worked on 11g and know this.

Does Windows 7 support FAT32 format?

I'm wondering whether Windows 7 support FAT32 format. And which format (FAT32 or NTFS ?) is recommended when using Boot Camp to create a partition for Windows XP and maybe upgraded to Windows 7 or something.
Thanks!

I'm wondering whether Windows 7 support FAT32 format.
Windows Vista and Windows 7 can't be installed onto a FAT32 partition. Use NTFS.
(46118)

Is there a specific differences doing obiee 11g setup on Linux Vs Windows?

Hi,
I did setup obiee 11.1.1.6 on windows 7 64 bit and upgraded RPD and webcat. now I need to do it on Linux environment. Is there a specific differences doing setup on Linux? do I need to update host file and configure loopback adapter in Linuc as well? please provide detail differences or settings I need to follow.
appreciate for your help.
Thanks
Jay.

I dont think any specific for Linux.
Make sure you take care these in profile file
ORACLE_HOME
TNS_ADMIN
PATH
LD_LIBRARY_PATH
Pls mark correct or helpful if helps

Does Quicktime X support these formats?

So, I'm planning on upgrading my Macbook Pro to Snow Leopard soon. One of the features I was looking at was the support for modern codecs in Quicktime X. However, they never mentioned just what was now supported. So now I ask if the following containers and codecs are suported:
AVI (container)
WMV (container)
DivX (Codec)
Xvid (Codec)
Real Media (Both)
I tend to watch the bulk of my videos in these formats (conversion is not an option), so I am curious if Quicktime X will play them or if I will need to use MPlayer....

All I know is:
AVI-YES
WMV-NO but you can use Flip4Mac
Oh and you can also download Quick Time 7 for Snow Leopard.
Message was edited by: Bryan W.

Support for Indian Regional languages in OBIEE 11g

Does OBIEE 11g support Indian regional languages like hindi, tamil, malyalam etc ?

Dude,
NO,it doesnt support any languages mentioned :d ...Y u got this doubt?? any specific requirement to do in regional languages.
I dint hear anything of that sort,did you come across.
Hope helps you.
Cheers,
KK
Edited by: Kranthi on Jan 13, 2011 3:21 AM

OLEDB in OBIEE 11g

Hi,
I want to get data from OSI PI (Historian server) using OLEDB.
PI doesn't support ODBC.
Does OBIEE 11g supports OLEDB?
Thanks
Regards

There might be other options.. explore..
cheers

Not able to import the data in OBIEE 11g

Hi Gurus,
I had just build a new development instance from scratch.
Q1) I am getting database connnection error on the Dashboard and when i tried to update row count from physical layer it also throws me an error, as i test i tried to import but i also got an error " The connection has failed", i am able to connect thru SQL Developer. Where does OBIEE 11g look for the tnsnames.ora file.
Q2.) Where and what setting do i need to so that i can add the users in the application roles by searching them in the EM, means the LDAP users. I had gone thru most of the stuff in the web but could not get thru.
Regards,
Amit

Ans 1. This is one of the most commonly asked questions on the Forum. I hope you'd search through available posts on the Forum before creating a new discussion. In any case, this might help: http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
Ans 2. Have you set up the integration with the LDAP provider or are you looking for help with that too? These should help:
http://docs.oracle.com/cd/E21764_01/bi.1111/e10543/privileges.htm
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-understanding-obiee-11g-security-application-roles-and-applic…
http://www.rittmanmead.com/2012/03/obiee-11g-security-week-managing-application-roles-and-policies-and-managing-security…

Formatting Totals in OBIEE 11g

Hi,
we have a requirement to format the totals of a table in obiee 11g.
When I format the totals, the formatting selections I made is not applied for all the entire totals section.
If the table has more than one dimension values in it, the formatting changes on Totals section is applied only for the first cell in the section.
However, the formatting changes of Totals section are fine for the measures added.
Please refer the screenshot in the below url
http://tinypic.com/r/346q4p1/6
In the screenshot, I expect the cell under Month dimension in the Totals row to have grey color as the back ground.
Could someone help me out with this issue.
Regards,
Pavan K.

Can you share your code that helps to understand issue.
Appreciate if you update your other post and helps you to get responses ;)
Aggregation in logical columns in obiee

How to update the default date format in OBIEE 11G.

Hi All,
How to change the default date format in OBIEE 11g from the MM/DD to DD/MM. Could anyone please help me out ASAP?
Thanks,
Arpan

Hi Arpan
OBIEE 11g is having " localedefinitions.xml " file at this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display
in my case i installed at C:\Oracle\MIddleware.
so
1- Stop BI Server from EM
2- Navigate to this Location C:\Oracle\Middleware\Oracle_BI1\bifoundation\web\display. in your case oracle home will be different
3- take a backup of this file localedefinitions.xml "
4- modify it and save
5- bring BI Server up.
Regards
sher

Image cannot be rendered because Aperture does not support image format

Dear all,
I have installed apple Aperture 3.03 and the complete Nick software plug-in selection:
• Dfine 2.0 for Aperture
• Color Efex Pro 3.0 Complete for Aperture
• Silver Efex Pro for Aperture
• Sharpener Pro 3.0 for Aperture
• Viveza 2 for Aperture
History
Until a few days ago the system was running ok / no notable issues on performance. / all pug in seem to run good / no issues. Also
• I Run OSX10.4/ Aperture 3.03 ( 32Bit mode)
• My library contains just over 10000 images / approximately 140GB
• I have recently updated the OSX software update including the security update 2010-005
• as well as the Snow leopard graphic update 1.0
• As far as I am aware all updates where automatically recommended by OSX Software update ( no manual intervention).
• As far as I remember after update the system still was running ok but honestly I can not tell you how many times the Nick Plug in started out of Aperture.
After all, Several times I continued using the system / still no noticeable problem until the following was happening:
Problem:
After creating with "PT gui" a panoramic image File type: "TIF" Pixel size: 5112 × 2556 (13,1 MP) I imputed this file in to Aperture (drag and drop). During the attempt to eddied this file with "Nick Define 2.0" the system was hamming up No response for several minutes from Dfine 2.0 / Aperture" At the end I had to "force quit" the applications.
After the consequential reopening of Aperture I tried again to eddied images with any Nick software Plug-In but each time Aperture prepares any image previously stored in my Library ti open the Pug in the following Error message appears:
*"This image cannot be rendered for editing because Aperture does not support the image format"*
Currently non of my previously in the library safed images can be opened in a Nick software Plug-In this applies to all file types I have tied " Raw, tif, jpg"
• I am still able to eddied normally with Aperture ( so far I do not find any other issue)
• A newly imported Raw image after being taken with my EOS 5D can be edited in the completed Nick software Plug-In selection ( so far I do not find any other issue)
The following actions have been taken to overcome the issue (all not successful):
• I restored my Library out of my back Up ( to previous time of event ( no Time machine back up)
• Uninstallation of all Nick software Plug-In selection
• Uninstallation Aperture Reinstallation Aperture / Nick software Plug-In selection
• Repairing the library ( all three possibilities)
• installation of latest EOS utilitys
Questions
• Can you support me to overcome this issue?
• Have you heard similar issues of Nick user Running the Aperture plug-ins?
For me it is really strange that even after replacing the the library in my normally not connect back up the problem still exists (this should be not affected by the event as the back up was not done any more) / new imported images are editable with the Plug-In.
I would be happy if you could support me in this issue.
Best regards,
Matthias
PS: I have reported this issue to Apple (via Aperture feedback) as well as contacted the Nick software support and currently waiting for feedback.
Harware:
Modellname: MacBook Pro
Modell-Identifizierung: MacBookPro5,1
Prozessortyp: Intel Core 2 Duo
Prozessorgeschwindigkeit: 2,66 GHz
Anzahl der Prozessoren: 1
Gesamtzahl der Kerne: 2
L2-Cache: 6 MB
Speicher: 4 GB
Busgeschwindigkeit: 1,07 GHz
Boot-ROM-Version: MBP51.007E.B05
SMC-Version (System): 1.41f2

Dear Ma-Le / All
I have just had the same problem
I use
• Aperture 3.03 with a iMac 2.8 Intel Core 2 Duo with all files on external hard disks (mac extended fomat as apple suggests) with referenced masters.
• Camera Nikon D300, with probably 75,000+ images on 2 hard drives
• Photoshop CS2 with PhotoTools 2.5 plugin
This has been working perfectly until yesterday when the system froze when I was using PhotoTools 2.5 with Photoshop CS2 - as a result of which I resorted to a force quit.
Since then on most of my files it has not been possible to use an external editor.
A message appears saying: *Editing Error - This image cannot be rendered for editing because Aperture does not support image format*.
The problem seems to apply to the attempted use of any external editor (including Noise Ninja)
The following have each been tried, all unsuccessfully:
- Using each of Aperture's library 3 first aid options
- Rebuilding directory using Diskwarrior
- Checking for virus using Virus Barrier X4
- Defragmenting library hard disk using TechTool pro
- Changing permissions settings
- Using Disk Utility first aid to repair permissions and checking main disk
- Removing some plist elements when open 'show package contents' of library
- Setting up a(n almost clean) new system, with newly loaded version of Aperture, with a new library from a vault saved prior to the crash when the problem first occured
Several things seem to me to be totally bizarre:
1 - The problem is the same on the other library hard disk which was not in use at the time
2 - The problem still occurs when a back up vault saved prior to this problem is loaded - using a new hard disk with a new system and a newly reloaded and upgraded Aperture software
3- The problem seems inconsistent. It appears to affect some photos but not all. Even from the same shoot, some photos can be edited using an external editor, whilst others cannot (but as far as i can tell most of the photos in a particular album seem to be consistently affected)
4- The only way around it seems to be if I import a new (copy image) from the original master. Then everything works ok, and I can successfully edit that copy image in photoshop / phototools plug-in.
I am beginning to wonder whether what has been corrupted is Aperture's ability to make copies from the master file which it then uses with the external editor (I have no real idea whether this is correct)
Does anyone have any ideas or solutions - or has anyone else been suffering a similar problem?
Eric
PS: As a professional photographer this problem is a really serious issue for me - and I really don't really want to go to Lightroom or Capture One

Does USD NACHA CCD Plus Format support one single payment with one vendor?

Hi,
We are implementing USD NACHA CCD Plus Format file for my customer.
Have the following query:
Does USD NACHA CCD Plus Format support one single payment with one vendor and another single payment with
different vendor in single file or will it generate two files for two payments or will it support single payment only.
Can anyone help us in this regard.
Thanks,Venkat.

I have created one invoice1 with one vendor and another invoice 2 with
different vendor processed the PPR using USD NACHA CCD Plus Format .
Both two payments came single file.
But we know that USD NACHA CCD Plus Format support Single Payment only.
Can anyone help us in this regard.
Thanks,Venkat

OBIEE 11g - help formatting graphs / trellis displays

Hi, in OBIEE 11g I'm trying to display a simple trellis graph of win % for various baseball teams over a 10 year period. On the trellis - I would like to NOT show the vertical scale or horizontal scale. I.e. vertical currently showing 20%, 40%, etc. up to 100%, and horizontal showing 2001, 2002, etc.
Is there any way to turn off the scales on the various axis? I can turn off the "labels" so that it doesn't put the word "Year" under the horizontal axis, but I haven't been able to figure out how to actually turn off the year values.
This pretty much holds even on a "normal" non-trellis graph - I can't see how to turn off the axis values there either.
Thanks!
Scott

Dear Maqsood...
Assalam Alaikum,
I donno this question has been answered or not. if not please refer below. ( Obiee 11g)
Edit Graph properties - > Style Tab -> Grpah Data- Style and Conditional Formatting -> Conditional Formatting -> Add Conditional Formatting.
You can add Conditional Formatting similar to Column Properties.
Mark Correct if its answered.
Regards,
fiaz

Does OBIEE 11.1.1.7 support AGO function at Week level

Hi,
I have a time dimension with Year,Quarter,Month,Week and Day Levels.
Year - 2013,2012...
Quarter- Q1,Q2,Q3,Q4
Month - 1,2,3..12
Week - 1,2,...52
Day - Date_id (20130101...(YYYYMMDD).
My Keys are : Year Level(Year_Number)
Quarter Level (Year+Quarter Number)
Month Level(Year+Month number)
Week Level(Year+Week number)
Day - Date_id(also defined as chronological keys)
I am creating a AGO(Measure,Level,1) in answers for Year and Week Level and they don't render correct results.
I started building the hierarchy with only Year and Day levels..verified the results - Looks Ok.
Similar fashion proceeded with Year,Quarter,Month and Day - Looks OK.
When I introduce Week level - All the AGO values are incorrect.
Any help on this is really appreciated.
Regards,
Swetha

Thanks Srini Veeravalli for your reply.
Yes I have verified it thoroughly.I have implemented this before on 10G for other customers and I don't feel that something is wrong with it .
I found this link on AGO Function in OBIEE 11G:
=======================================
https://forums.oracle.com/message/9323083
Does a month have always the same number of week and begin with the first day of a week ?
If it's not the case, your dimension is not good when you make a report on the week grain for a year ago for instance.
Here a check list:
http://gerardnico.com/wiki/dat/obiee/ago_todate_configuration#timecalender_dimension_design_verification
============================================
OBIEE 10G/11G - How to set up the time dimension (for time series functions Ago, Todate, ...) ? | GerardNico.com …
In the above post also, Time dimension configuration for AGO/TODate ( Time series) are set up with 4 levels: Year,Quarter,Month and Day.
So Just needed a confirmation if week level shouldn't be in the hierarchy in 11.1.1.7.
Regards,
Swetha

Does obiee 11g supports XSL format

Similar Messages

Maybe you are looking for