Does one key recovery effect drives other than the one where windows is installed?

I'm a noob and want to reinstall windows due to some hardware issue. I want to know that if I restore my system partition to its initial state, will the data saved in other drives be affected?

yosam26 wrote:
I'm a noob and want to reinstall windows due to some hardware issue. I want to know that if I restore my system partition to its initial state, will the data saved in other drives be affected?
I'm referring to what I know about OKR based on my unit. There are two drives (C: and D). This is what is explained in the manual (pay particular attention to the Note):

Similar Messages

Windows 8.1 installation Keep personal files option - does it delete files in drives other than c

i am installing windows 8.1 . I am not getting an option to select custom installation. Does this delete files in my drives other than C?
I want to install windows in c drive and want to keep the files in my D and E drives. What to do?

Hi,
No matter which method do you use, it would not affect your D and E drive if you don't format them during your installation.
Which version of Windows was running on your computer now? "Upgrade" option is only available when a supported version of Windows is already running on the computer.
Please refer to the following table to check if you could keep some file:
Update to Windows 8.1: FAQ ("Will i be able to keep my files, settings, and apps?" section)
http://windows.microsoft.com/en-IN/windows-8/upgrade-to-windows-8
Karen Hu
TechNet Community Support

How do I assign a file to a drive other than the drive that contains my program software?

I've just installed a video editing program on my new Mac Pro Xeon 64 bit workstation. I want to ensure that all my media files reside on a drive other than the drive that contains programs. I had no problem doing this on my old Dell. How do I do this on my Mac Pro? -- Gary

Application Preferences.
Next time, 'what' program would also help.
Most people do setup with a dedicated boot drive with OS and apps, .then use other drives or array(s) for media, scratch as needed, including external hardware RAID.

How to maintain itunes on a drive other than the system drive

I would like to have itunes on a drive other than the Windows 7 operating system drive, and have it stay there.
Never mind...I found a post which applies.

Hi Maciejhttp://forums.adobe.com/people/Maciej%20Przepi%C3%B3ra
Thanks for your inputs.
I have memory leaks in my code. I have tried iDialog->Release() code which reduces some of the memory leaks
Though I want to use more clean method of InterfacePtr.
"To prevent reference counts from incrementing, as in Type 1a and 1b, use this constructor, which does not call IPMUnknown::AddRef:"
Which Constructor you are pointing out, I didn't get it.
I tried InterfacePtr<IDialog> iDialog((IDialog *)iWidgetParent->QueryParentFor(IID_IDIALOG));
It started giving me assert again.
Please give an example how to do it or which InterfacePtr constructor doesn't call AddRef().
Many thanks for helping me with this.
D

Mail with multiple gmail accounts sending messages from wrong email, other than the one i select

mail with multiple gmail accounts sending messages from wrong email, other than the one i select:
i'm using mail on osx 10.7 with multiple gmail accounts. when i create an email, i check to be sure i'm sending/replying from the correct account. after i send it, somehow it actually sends it from a different account, other than the one i've selected "from." this is evidenced by the reply email i receive. how can i fix this?
in preferences, i have "send new messages from : account of selected mailbox"

From the Mail menu bar, select
          Mail ▹ Preferences...
The Mail preference dialog opens. Select the Composing tab from the row of icons at the top. From the menu labeled
          Send new messages from:
choose
          Account of selected mailbox
Note that this setting may have no effect if you start a new message while a VIP or smart mailbox is selected in the mailbox list. Those are saved searches, not actual mailboxes.
If the problem remains, select the Accounts tab in the preference dialog, then select the affected account in the list on the left.
In the Account Information pane, select the correct server in the menu labeled
          Outgoing Mail Server (SMTP)
If there's only one server in the menu, select
          Edit SMTP Server List...
and add a new server with the correct settings. If you're not sure how to do that, try the Mail Settings Lookup.
Another possibility is that the wrong card in your address book is selected as yours. Select your card in the Contacts application. Then select
          Card ▹ Make This My Card
from the menu bar.

I need a replacement HD audio driver other than the IDT/Beats hunka junk.

Anyone out there know if its alright to install a HD audio driver (brandwise) other than the one that came pre loaded on my HP Dv6 A8 windows7 x64? Hp apparently has IDT by the short hairs, not letting anything get out without being overprocessed, compressed and enhanced to DEATH. Not only that but they've got to drag that insolent worthless F*up, Beats audio to every download. I've tried everything, from the generic system driver that comes with windows, to registry patches and still have every problem that everyone else has with this driver.
I only see a few ways through this and they are as follows
1.) Get a new sound card ( but I'm broke after paying 900.00 for this laptop)
2.) Build a cutom driver ( guess you gotta start somewhere 'eh?)
3.) Get the lo-down on a Beats-free Idt driver...........ANYONE?..anyone.......anyon..any........
4.) OR, get a thumbs up and possibly a link to the original question.
I'm afraid that all this messin' with my 'puter is gonna funk it up after a while. Kinda like a bad hair day, the more you fuss the worse the 'muss.
Help M EEeeee

Sprinks
I am providing you a link to an HP Support document called “Obtaining Software and Drivers” below. This document will demonstrate the different ways up getting your drivers. From Microsoft, to the HP driver page for your computer, to the original drivers that came with your computer.
There is nothing saying you cannot go directly to the audio manufacturer and download their drivers for the chip but there is no guarantee that they will work correctly as most times the OEM (in this case HP) request modifications to the hardware to suit the software requirements so they may not match up exactly. It is worth giving it a try though.
Obtaining Software and Drivers
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph07165
Please feel free to re-post if you have any further questions or concerns.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HT2688 Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help

Having updated to iOS7, I am unable to upload a video to shared stream but when I do, it won't play on any device other than the one used to upload ... help please

I also have this problem, as does everybody else I know who has tried to use the video in icloud. As the original poster says, they can be uploaded, but will only play on the device from which they were originally uploaded, appeaering only as images which display an endless buffering symbol when "played" on any other devices with which the photostream is shared.
Has anyone been able to get this to work? And if not, why is there no acknowledgement from Apple that this bug exists and will be addressed in an update (now running 7.0.2 and still no improvement)? It was, after all, advertised as one of the attractive new features of iOS 7. So why the stony silence?

How do i install reader to a drive other than the boot drive?

how do i install reader to a drive other than the boot drive?

Hi nicksdaddy,
There is an offline version:
http://get.adobe.com/reader/enterprise/
Hope that helps!
Stacy

Can I install Adobe Reader to a drive other than the C: drive?

Can I install Adobe Reader to a drive other than the C: drive?

Hello there,
Welcome to Adobe Community. Yes it can be installed on a different drive. Though some of the files installed by it will still be installed on C: drive.
When you run the installer, use 'Change destination folder' at the bottom of the panel
If you already have Adobe Reader installed on the C: drive, you must uninstall it before installing a new version on a different location.
Thanks!

Can I use a different charger for my iPhone other than the one that was supplied for it

Can I use a different wall charger for my iPhone 4S other than the one that was supplied with it

wjosten wrote:
Lawrence Finch wrote:
Apple puts no special requirements on it other than that it meet the USB spec.
Except for the connector...
What is special about the connector for the 4s charger cable? Mine is a normal USB connector. The question was about the wall charger, not the connector to the phone.

Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

Can CC apps be downloaded to, and run from, a hard drive other than the OS drive?

Yes. You can define alternate locations in teh application manager. just be aware that some components will always end up on your system root drive no matter what.
Mylenium

On and iPad how to Allow User To Enter Custom Text (Dropdown only) Enables users to enter a value other than the ones in the list.

On an iPad, how do I :
Allow User To Enter Custom Text
(Dropdown only) Enables users to enter a value other than the ones in the list.'?

Are you using the built-in Currency option under the Format tab? If so,
what you're describing should not happen.

How to create a window with its own window border other than the local system window border?

How to create a window with its own window border other than the local system window border?
For example, a border: a black line with a width 1 and then a transparent line with a width 5. Further inner, it is the content pane.
In JavaSE, there seems to have the paintComponent() method for the JFrame to realize the effect.

Not sure why your code is doing that. I usually use an ObjectProperty<Point2D> to hold the initial coordinates of the mouse press, and set it to null on a mouse release. That seems to avoid the dragging being confused by mouse interaction with other nodes.
import javafx.application.Application;
import javafx.application.Platform;
import javafx.beans.property.ObjectProperty;
import javafx.beans.property.SimpleObjectProperty;
import javafx.collections.FXCollections;
import javafx.event.ActionEvent;
import javafx.event.EventHandler;
import javafx.geometry.Point2D;
import javafx.geometry.Pos;
import javafx.scene.Node;
import javafx.scene.Scene;
import javafx.scene.control.Button;
import javafx.scene.control.ChoiceBox;
import javafx.scene.input.MouseEvent;
import javafx.scene.layout.AnchorPane;
import javafx.scene.layout.StackPane;
import javafx.scene.layout.VBox;
import javafx.scene.paint.Color;
import javafx.stage.Stage;
import javafx.stage.StageStyle;
import javafx.stage.Window;
public class CustomBorderExample extends Application {
@Override
public void start(Stage primaryStage) {
AnchorPane root = new AnchorPane();
root.setStyle("-fx-border-color: black; -fx-border-width: 1px; ");
enableDragging(root);
StackPane mainContainer = new StackPane();
    AnchorPane.setTopAnchor(mainContainer, 5.0);
    AnchorPane.setLeftAnchor(mainContainer, 5.0);
    AnchorPane.setRightAnchor(mainContainer, 5.0);
    AnchorPane.setBottomAnchor(mainContainer, 5.0);
mainContainer.setStyle("-fx-background-color: aliceblue;");
root.getChildren().add(mainContainer);
primaryStage.initStyle(StageStyle.TRANSPARENT);
final ChoiceBox<String> choiceBox = new ChoiceBox<>(FXCollections.observableArrayList("Item 1", "Item 2", "Item 3"));
final Button closeButton = new Button("Close");
VBox vbox = new VBox(10);
vbox.setAlignment(Pos.CENTER);
vbox.getChildren().addAll(choiceBox, closeButton);
mainContainer.getChildren().add(vbox);
    closeButton.setOnAction(new EventHandler<ActionEvent>() {
      @Override
      public void handle(ActionEvent event) {
        Platform.exit();
primaryStage.setScene(new Scene(root, 300, 200, Color.TRANSPARENT));
primaryStage.show();
private void enableDragging(final Node n) {
   final ObjectProperty<Point2D> mouseAnchor = new SimpleObjectProperty<>(null);
   n.addEventHandler(MouseEvent.MOUSE_PRESSED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(new Point2D(event.getX(), event.getY()));
   n.addEventHandler(MouseEvent.MOUSE_RELEASED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        mouseAnchor.set(null);
   n.addEventHandler(MouseEvent.MOUSE_DRAGGED, new EventHandler<MouseEvent>() {
      @Override
      public void handle(MouseEvent event) {
        Point2D anchor = mouseAnchor.get();
        Scene scene = n.getScene();
        Window window = null ;
        if (scene != null) {
          window = scene.getWindow();
        if (anchor != null && window != null) {
          double deltaX = event.getX()-anchor.getX();
          double deltaY = event.getY()-anchor.getY();
          window.setX(window.getX()+deltaX);
          window.setY(window.getY()+deltaY);
public static void main(String[] args) {
launch(args);

I want to edge to a phone other than the one that I am "eligible" for

I am very frustrated with the service that I have received lately. I currently own an iPhone 5 and have an upgrade in July. The phone works fine other than the short battery life and little storage left due to the fact that the new software updates get larger as they go. I became eligible for early edge at the beginning of February. When I went to take a look at my options I was told that I would only be able to edge to a droid max. I have had iPhone's since 2010 when I first got a smart phone, my entire platform runs off of Apple and I have absolutely no desire to change that now.
I called customer service to see if anything could be done to change this option and was told that she could not do anything at the moment, but if I called back in the middle of March that I would be able to get an iPhone 6 and that she would notate my account saying just that. I waited like she told me and called back yesterday. I was then told that my account was notated "if she calls back in a COUPLE OF MONTHS that she will be able to get an iPhone 6." I'm sorry, but there is a big difference between a couple of weeks and a couple of months, especially considering that in a couple of months I will be able to upgrade my phone anyway which would mean there would have been no point in calling back if that's what I had been told originally. Why would I be told one thing and be specifically told when to call back, and then have her write down something else completely? It is very frustrating to be told one thing and then to essentially be told that I am incorrect because something else was written down. I have been a Verizon customer since 2007 and stayed with Verizon even when I moved to my own plan in 2013 and the fact that I am being given the run around is extremely frustrating and annoying. I am very dissatisfied with the service that I have received and with the fact that this is my fourth time dealing with the same topic.

Yes, you got the phone which was currently eligible for Early Edge at the time. This changes from time to time. When the iPhone 6/6+ was first released those were the ONLY phones you could purchase on Early Edge. This was for September and October of 2014. You would not have been able to purchase any other phone with Early Edge at the time. At the time, this made a lot of android phone owners angry, just as it is making the OP(an iPhone owner) angry now. Then it was the Droid Turbo ONLY, then it was....
One of the requisites AS LISTED ON THE EDGE PAGE is that your line must be eligible for an upgrade. Verizon lifts this requirement IF you want to purchase a specific phone. If the phone you want is not eligible for Early Edge at this moment, it may be at some point in the future and the phone CURRENTLY available may NOT be available for Early Edge. You were able to get the phone you wanted on Early Edge because it was the phone(or one of the phones) eligible at the time for Early Edge.
Verizon does not have a link for Early Edge because it is not always available AND the eligible phones change from time to time. This is no different than any other special they occasionally run.
Regardless, since a link WAS given for Edge which DOES list upgrade eligibility as being a requirement, if someone DOES NOT fulfill that requirement it is not out of the question that other portions of Edge may be different, too, such as what you posted "All Verizon Wireless smartphones, tablets and basic phones are eligible for Verizon Edge." If Verizon relaxes a requirement to enter into Edge, why is it so hard to fathom they may ALSO change something else such as which phones are eligible???
The fact that the OP IS NOT able to purchase an iPhone on Early Edge simply reinforces this fact.

Can the creative cloud apps be installed on a drive other than the boot drive?

I have an SSD for the boot drive and keep most apps on an 'applications' drive. It appears that CC apps install by default to the boot drive. Am I incorrect? Can I control what drive they install on?

Yes you can change the install location:
Launch the Adobe Application Manager.
Click on your name in the top left and from the context menu choose Preferences.
Change the Install Location to the one you want.

Does one key recovery effect drives other than the one where windows is installed?

Similar Messages

Maybe you are looking for