Does oracle B2B(11.1.1.6) supports to generate EDI VICS format based 856/810 messages?

Hi All,
I've checked the form that answers to receive a 850 EDI VICS formats, by removing GS08 codelist and that works good. This setup is to receive a PO from trading partner(Inbound).
But how the outbound(like sending 856/810/846 documents to partner) EDI VICS documents are generated in B2B?
Appreciate your help.
Thanks,
Levey

In your dmesg appears the following:
[ 110.659286] NVRM: Your system is not currently configured to drive a VGA console
[ 110.659294] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 110.659298] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 110.659301] NVRM: drivers including, but not limited to, vesafb, may result in
[ 110.659305] NVRM: corruption and stability problems, and is not supported.
Do you have any other video drivers installed that may be conflicting with the nvidia driver?
# pacman -Qs xf86-video
If not, try removing your nvidia xorg config and rebooting to a default set-up. It could be one of the settings in the xorg config.
# mv /etc/X11/xorg.conf.d/20-nvidia.conf /path_to_back_up_your_config
Cheers.

Similar Messages

Does Oracle XE 10g or 11g have supported patches/bug fixes

Does Oracle XE 10g or 11g have supported patches/bug fixes?

XE isn't patch-able, unfortunately- eg. in the section ...Major Features Not Included at http://docs.oracle.com/cd/E17781_01/license.112/e18068/toc.htm#XELIC116 a "patch set" is one of the "not included" items
One could install one of the full release editions, get it patched, and upgrade an XE instance with the patch-able edition, but access to patches requires a support agreement.

Does Oracle WebCenter Interaction portal version 10gR3 support IE8?

Does Oracle WebCenter Interaction portal version 10gR3 support IE8?

Does Oracle WebCenter Interaction portal version 10gR3 support IE8?

Does Oracle B2B supports file (inbound and outbound) via Odette FTP?

I am unable to find any documentation on whether B2B can receive/send files via OFTP. If it is supported, please point me to any documentation on this topic.
Thanks
Shanthi

Thanks Rafael! I have reached out to the Oracle B2B Product Development to provide an enhancement. What is your email id in case I need more details about the open source product? I visited your web site. I am unable to download the APIs since I do not have SVN. Is there a location where I can download it as a compressed zip file?
Thanks
Shanthi

Video does not play: "Either windows doesn't support the item's file format......"

Error message
"Either windows doesn't support the item's file format or the content doesn't match the extension"
I have both a Yoga and a Thinkpad 2. The Yoga is running Win 8 and the Thinkpad 2 has 8.1 Preview.
I have copied multiple video files which are in either .avi or .mp4 containers.
Some will play and some will not. I have installed all sorts of codec packages and players and the problem is the same. I though it might be a container problem so I tried to convert the file and the converter I used did not work.
Searched the Internet and nothing really useful was found.
Then I discovered a common thread. In the files that played, the codec information displayed when checking in properties and the ones that did not play, did not have the information.
I have a video file on a USB flash drive and checked the properties and the information was there and I could play it from the flash drive. I copied it to my desktop and the file would not play. In checking, the codec information was not present.
There seems to be an error in copying files where the requisite codec information is not being transferred.
I have tried this multiple times and multiple permutations of transferring. Sometimes it will play from the desktop and will not play after transfer to the microSD card.
Each time when it plays, the information is there and each time it does not play, the information is not there.
Sal

The problem is the period at the end. This system assumes it
to be part of the url. I should have put a space and the end of the
url before using a period to close the sentence. try this one:
http://www.aaew.org/intro.swf
http://www.scofieldministries.org/webtest/mv1.swf
http://www.scofieldministries.org/webtest
Please note that just the home page and supporting files have
been loaded to the test server.
Thanks,

Does Oracle Business Intelligence Suite support cliper, fox and dms

Hi all,
Does Oracle Business Inteliigence Suite Enterprise Edition support reports dates from
follow tables and databases:
cliper DBF
FOX visual DBF
DMS unisys
Oracle 9.0 and 10g
Is there any examples, demos or dopcumentations?
thanks in advanced
Gordan

Hi Gordon,
cliper DBF => using ODBC
FOX visual DBF => using ODBC
DMS unisys => don''t know but if there is a ODBC availble it will work
Oracle 9.0 and 10g => of course (native Client and ODBC)
Regards
John
http://obiee101.blogspot.com

Oracle B2B 11g question about pulling data from remote TP sftp server

Hi,
We would like replace our custom b2b solution with oracle b2b, but without resulting much changes in remote TP side. To do that the following issues are to be resolved.
1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it.
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type.

1) in the existing custom b2b, host tp is pulling data from remote TP location. How does oracle b2b pull data from remote location using sftp(AS1 1.1)? Oracle document says that by using global listening channel, we can make oracle b2b listen to the sftp server? Is that correct? Is there any sample about how to configure and test it. I am not sure what do you mean by AS1 1.1 but yes, SFTP is supported in Oracle B2B and if you want to poll a SFTP location, then you need to create a listening channel in Oracle B2B. For creating a listening channel, please refer -
http://download.oracle.com/docs/cd/E14571_01/integration.1111/e10229/bb_listen_chan.htm#BAJJICJJ
2) For outbound file we would like to preserve the file name. If you use sftp for sending the file out, is it possible to preserve the filename?Yes, it is possible. There is a setting "Preserve Filename" in transport protocol parameter of a SFTP channel which should be enabled for this purpose.
3) Some incoming files which are datafiles , does not have any identification pattern. Is there any other way to identify the document type? For example from which location we are pulling the file can tell us the document type. In case of FTP/FILE/SFTP, file name can be used to pass document type and revision information to Oracle B2B. Please refer "Filename format" setting on the above mentioned link.
I figured it out from another thread about how to pull the file. I configured the listening channel so that it reads from a remote server using sftpo protocol. And I have given the filename format as %FROM_PARTY%.dat. I am putting a file like TESTBC.dat. TESTBC is the name of the remote TP. B2B is reading the file but, recognizes the document tupe, but says that FromTP null. What is the solution?
Make sure that TP name is same as what you are giving in filename (cross-check for spelling). You may also try with default naming convention (do not mention anything in Filename format in listening channel configuration) - %FROM_PARTY%_%TIMESTAMP%.dat
for eg -
Acme_12345.dat
Regards,
Anuj

How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B

Hi Friends,
How to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
External Trading Partner is sending the EDI 856 via AS2 URL to our Oracle B2B Server.
In the inbound 856 agreement, we have checked the option of Funtional Ack and also Functiona Ack handled by B2B is yes.
We have the outbound agreement which is sending that Functional ack 997 (auto generated by oracle b2b) and we have specified the Outbound AS2 channel of the Partner.
997 doc is being sent to external partner using AS2 channel, but the filename is generating as '40101'.
Please can you let me know how to set the AS2 fileName for outbound Functional Ack 997 auto generated by Oracle B2B.
Appreciate your valuable answers!!
Thanks,
Amirineni

Amirineni,
AFAIK, there is no option to set the file name when the 997 is generated automatically by B2B.
Alternatively, if this is a must requirement, you can generate the FA from backend and send to B2B with MSG_TYPE =9. In this case, you can set the header with filename (How to set the actionname property in B2B 11g)

Does MRCA 10.1.2.0.3 support Oracle DB 10.2.0.1?

Does OracleAS Metadata Repository Creation Assistant 10.1.2.0.3 support Oracle DB 10.2.0.1? Documentation says it supports 10.1.0.4 or later. Is there a patch for it?
Thank you,
MC

No, please use "Metadata Repository Creation Assistant (10.1.2.0.3)".
Please go to the Application Server download page (http://otn.oracle.com - click on Download Application Server) or direct on:
http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Locate: "Metadata Repository Creation Assistant (10.1.2.0.3)"
Regards,
Martin

Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?

Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
Any help is appreciated.
Regards,
Raghav

We have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.

Does oracle application server 10.1.3.3 supports IPV6

hi
Anyone let me know does oracle application server 10.1.3.3 supports IPV6.
thanks in advance
Arunachalam

Hi
I believe this is covered in the online documention:
http://download.oracle.com/docs/cd/B32110_01/core.1013/b28944/opmnxml.htm#BABIICIJ

Does Oracle support this........

Hi
I want to select values in a object types in a table over the database link. like
select name from [email protected]
where name is of type varray(3) of varchar2(100) in the country table and db.com is database link.
It is giving me error ORA-22804.
Does Oracle supports this or not?
Regds
~Sachin

Your answer is in the message text - Oracle does not support object operations over a database link.
null

Does Oracle (installed in unix) support OS Auth for Windows AD?

Hi, I've tried setup the Oracle (installed in Windows) support OS Auth for Windows AD.
But does Oracle (currently I am using 9i) installed in Unix support OS Auth for Windows AD (using LDAP/ Kerberos / etc.)?
If yes, can anyone tell me how to make it ?
Thanks!

Yes.. Oracle support Windows AD authentication using Enterprise User security.
Please contact me on following if you need more details
Email: [email protected]
Ph. 732 404 8364
We are planning to have EUS presentation for our clients. Please let me know if you are interested to know more on EUS.
Regards,
Nishi, CISSP CISA

What is native Sql data types and does oracle support this?

what is native Sql data types
Does oracle support this?

http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14220/datatype.htm#g31099

Does oracle support TRANSACTION_READ_UNCOMMITTED level?

I am using oc4j drivers with jdbc for oracle 9i
I could not set the transaction isolation level to TRANSACTION_READ_UNCOMMITTED.
Does oracle support this transaction level ?
(SQL Server support it)
Here is the stack trace of the error:
java.sql.SQLException: READ_COMMITTED et SERIALIZABLE sont les seuls niveaux de transaction valides
java.sql.SQLException: READ_COMMITTED et SERIALIZABLE sont les seuls niveaux de transaction valides
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:134)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:179)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:269)
at oracle.jdbc.driver.OracleConnection.setTransactionIsolation(OracleConnection.java:1681)
Thanks for any help...

Mahmoud,
The error message, you have posted, seems very clear -- the only valid values are READ_COMMITTED and SERIALIZABLE. This is also documented in the "Oracle9i JDBC Developers Guide and Reference", chapter 19 [Coding Tips and Troubleshooting], in the section entitled "Transaction Isolation Levels and Access Modes". Here is an excerpt:
the Oracle server supports only the TRANSACTION_READ_
COMMITTED and TRANSACTION_SERIALIZABLE transaction isolation levels
As someone who moved from Oracle to Informix, I can tell you from my experience, that different RDBMS's have the same functions, but each works differently. So while you probably needed to use the TRANSACTION_READ_UNCOMMITTED isolation level with "SQL Server", you don't need it for Oracle.
What you need to do is forget how you do things with "SQL Server", and learn how to do things the Oracle way. As you have seen, trying to transfer "SQL Server" code to Oracle doesn't always work.
The Oracle documentation is available from
http://tahiti.oracle.com
Good Luck,
Avi.

Does oracle B2B(11.1.1.6) supports to generate EDI VICS format based 856/810 messages?

Similar Messages

Maybe you are looking for