Does Oracle B2B supports file (inbound and outbound) via Odette FTP?

I am unable to find any documentation on whether B2B can receive/send files via OFTP. If it is supported, please point me to any documentation on this topic.
Thanks
Shanthi

Thanks Rafael! I have reached out to the Oracle B2B Product Development to provide an enhancement. What is your email id in case I need more details about the open source product? I visited your web site. I am unable to download the APIs since I do not have SVN. Is there a location where I can download it as a compressed zip file?
Thanks
Shanthi

Similar Messages

  • Does Oracle Tutor support ".xlsm" file format ?

    Does Oracle Tutor support ".xlsm" file format ? Where to find the list of supported file formats?
    Customer is using Microsoft Office Professional Plus 2010 and EBS R12.1.3.
    Thx,
    Phil.

    Fonzi,
    Good, then we are talking about the same thing when it comes to states.  The following defines all the digital logic states our hardware supports:
    http://zone.ni.com/reference/en-XX/help/370520K-01​/hsdio/flogic_states/
    A note in that document states the hardware modules that can support all the digital states.  The 6541 can still accept the WDT data type, since in your code it did let you.  It just doesn't support some of the digital states that it contains.  Since it doesn't have hardware compares, it can't handle the compare states.  If the WDT only had 
    You are correct, you must use the WDT when using the extended digital states.  Its documented here:
    http://zone.ni.com/reference/en-XX/help/370520J-01​/hsdio/digitalwaveformdata/
    All of my resources have been found in the NI-HSDIO Digital Waveform Generator/Analyzer Help file, which is installed onto your computer with the HSDIO driver.  An online version can be found here:
    http://zone.ni.com/reference/en-XX/help/370520K-01​/
    Product Support Engineer
    National Instruments

  • Seeking recommendations for handling large binary documents with security(preferable) for inbound and outbound scenarios from OSB- SOA and SOA- OSB

    Hi,
    I am currently working on a project with the following requirements
    1. Client transfers binary document (between 1-20MB in size) from OSB proxy to SOA composite to Content Management system
    2. Client retrieves binary document (between 1-20MB in size) from Content Management system to SOA composite to OSB proxy
    In otherwords, a inbound and outbound integration.
    What I have tried so far and my results:
    Scenario A
    1. Enabled MTOM on SOA composite by attaching wsmtom policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    Scenario B
    1. Enabled MTOM and security on SOA composite by attaching wsmtom policy and SAML policy
    2. Created an OSB business service and consumed the SOA composite application
    3. Enabled MTOM on OSB proxy and business service and configured it to pass by reference
    I have a demo integration setup that writes a binary document to a file using the above steps. My SOA composite has a file adapter that writes the binary data to an external file and it is exposed as a web service with a simple WSDL definition that has an inline XSD schema with an single element of base64binary type. I have added a mediator that maps this base64binary element node to the file adapter's input node.
    Result for Scenario A with file size less than 1 MB:
    Flawless execution with sub-second response times
    Result for Scenario A with file size of 8MB
    First attempt: SOA composite faults with database transaction related error, solved by increasing JTA timeout
    Second attempt: Flawless execution, but file transfer took over 100 seconds to complete. This is very poor performance and my suspicions are that this cannot be the expected behaviour, but I dont know the internal workings of the SOA composite and why its taking this long.
    Result for Scenario B:
    The OSB business service does not accept/recognize the SAML policy in the WSDL and suggests to configure OWSM policies manually, but OWSM policy in OSB does not have the wsmtom policy. Regardless of this, any permutation of MTOM + WSS security in this integration scenario either did not work outright or MTOM optimization was not happening ie binary data was materalizing in the message body.
    I have only about 3 weeks left to implement a viable solution and the closest ive come to a solution is Scenario A but that +100 second response time for an 8MB file is really worrying.
    I would appreciate any level of guidance, recommendations or suggestions as to how I go about tackling this problem.
    Thanks
    regards,
    Johnny

    I think this is due to the underlying mechanism of weblogic classloading..
    You can contact oracle support @ https://support.oracle.com to report issues. Roughly this is the process .
    1- get the Oracle Customer Support Identifier (CSI) for the client you are working for.
    2- Create a user profile quoting the CSI. This will send an approval request to oracle support admins at your client.
    3- Get the oracle support admins at your client site to approve your request for support access.
    4-Once they approve , you can access the support site and raise service requests.

  • How to do inbound and outbound interfacing using UTL_FILE?

    dear members,
    How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
    regards
    sandeep

    Hi Sandeep,
    I do not know if I got your question correct.
    Here is my understanding of it, pls correct me if I am wrong:
    You want to read from and write to the OS from inside the DB? Right?
    There are differnt waysa to do so, depanding on your Oracle version:
    1. you can use the initialization parameter UTL_FILE_DIR to specify a directory on OS where you can read from and write to through the package UTL_FILE.
    2. You can use a directory object in the DB to manage read write access to the OS. This is also usable with the package UTL_FILE as location where to read from and write to.
    => CREATE DIRECTORY my_dir AS '/home/oracle/my_directory';
    GRANT read , write ON DIRECTORY my_dir TO scott;
    SELECT * FROM dba_directories;
    You need CREATE ANY DIRECTORY system privilege for this.
    You can use directory objects also for external tables.
    With these you can read from flat files in teh directory on OS with a select statement as if it were a table inside the DB.
    Does this go into the direction you were thinking of?
    Hope it helps for the first.
    Regards,
    Lutz

  • SAP inbound and outbound delivey in single shipment document

    Hi
    We are doing outbound and inbound delivery creation in SAP. These are dropped to OTM(oracle transport management system). OTM will create orders for deliveries and groups multiple deliveries into one shipment. This is sent back to SAP for shipment creation. Problem we have is SAP can have either inbound deliveries Or outbound deliveires in a shipment. Based on inbound shipment or outbound shipment in shipment document type. OTM does not has this restriction and can bundle both outbound and inound in single shipment.
    Business scenario we have is multi pick and multi drop, where there is possibility that 1) inbound del from vendor for PO            2) Outbound del to customer for SO and 3) outbound/inbound del for STO from RDC to DC in a single sipment.
    Please advice ow this can be achieved in SAP.
    Best Regards
    Edited by: M.N. Phani Sai on Oct 28, 2010 10:34 AM

    It is not possible to involve both inbound and outbound deliveries in the same shipment. SAP has its deficiencies...
    http://sap.ittoolbox.com/groups/technical-functional/sap-log-wm/inbound-and-outbound-delivery-in-the-same-shipment-3512217
    http://help.sap.com/saphelp_erp60/helpdata/en/f5/04898047bd11d2bf750000e8a7386f/frameset.htm
    You cannot place outbound deliveries and inbound deliveries together in the same shipment document. Nor is it possible to assign Items from a delivery or an inbound delivery to different shipment documents. You must decide at the delivery stage whether order items can be shipped together in one delivery and therefore require only one shipment.
    Edited by: Csaba Szommer on Oct 28, 2010 11:05 AM

  • How to do an inbound and outbound interfacing using UTL_FILE ?

    dear members,
    How can we do interfacing from a legacy system to oracle and vice versa using the UTL_FILE package. I mean how to do an INBOUND and OUTBOUND interfacing using utl_file.
    regards
    sandeep

    in/
    file/
    bad/
    done/
    out/
    file/
    bad/
    done/
    I would start by ftping / putting the file in in/file/ folder, once ftp has completed move it to complete/ folder and process the file. If errorrs are generated move the file over to bad folder. If completed successfully move over to done folder.
    Having said that you would use UTL_FILE_DIR init parameter to set your directory.
    ALTER SYSTEM SET UTL_FILE_DIR='directory1','directory2' scope=spfile;
    Then you would use the regular utl_file packages to read / write to the files.
    UTL_FILE.FOPEN and so on.

  • EJB - inbound and outbound proxy

    I have implemented inbound and outbound proxy to transfer file. In proxyFTPClientREQIB method of ProxyFTPClientREQIB_PortTypeImpl class I want to invoke outbound proxy that sends structure to XI. I have a problem with context, because after invoking outbound proxy method from inbound proxy there is an incorrect context (concatenation of EJB inbound context and EJB outbound context: ejbContexts/bcc.com.pl/MonaApp/bcc.com.pl/MonaApp/ProxyFTPClientREQIB_PortTypeBean and localejbs/bcc.com.pl/MonaApp/ProxyFTPClientRESOB_PortTypeBean)
    Context ctx = new InitialContext();
    proxyFTPClientRESOB_PortTypeLocalHome = ProxyFTPClientRESOB_PortTypeLocalHome) ctx.lookup("localejbs/bcc.com.pl/MonaApp/ProxyFTPClientRESOB_PortTypeBean");
    proxyFTPClientRESOB_PortTypeLocal = proxyFTPClientRESOB_PortTypeLocalHome.create();
    Error:
    Path to object does not exist at localejbs, the whole lookup name is ejbContexts/bcc.com.pl/MonaApp/bcc.com.pl/MonaApp/ProxyFTPClientREQIB_PortTypeBean/localejbs/bcc.com.pl/MonaApp/ProxyFTPClientRESOB_PortTypeBean.
    What should I do to avoid concatenation of contexts?

    Hi Julia,
    the correct call is:
    ... ctx.lookup("java:comp/env/ejb/ProxyFTPClientRESOB_PortTypeBean");
    The Reference to the JNDI name is done in the ejb-jar.xml:
    <ejb-local-ref>
      <ejb-ref-name>ejb/ProxyFTPClientRESOB_PortTypeBean</ejb-ref-name>
      <ejb-ref-type>Session</ejb-ref-type>
      <local-home>YourLocalHomeInterface</local-home>
      <local>YourLocalInterface</local>
      <ejb-link>ProxyFTPClientRESOB_PortTypeBean</ejb-link>
      </ejb-local-ref>
    Hope that helps,
    Stefan

  • EMAIL inbound and outbound - Sales pro - urgent

    Hello,
    Our requirement is to reach out to the customer and also the email recieve, whether is it possible in Sales pro. i have seen in the navigation bar of SALES PRO standard workcenter EMAIL does this allow me to do inbound and outbound mails to the customer.
    Is there any SAP help related to this, or any best practice to activiate this functionality.
    do we also need to define reciepient address also via config.
    Regards
    AM

    Hi,
    http://help.sap.com/saap/sap_bp/bblibrary/Documentation/C4B_CRM701_BB_ConfigGuide_EN_XX.doc.
    https://help.sap.com/saap/sap_bp/BBLibrary/Documentation/C20_CRM701_BB_ConfigGuide_EN_XX.doc.
    pFA
    Regards,
    Sumeet

  • Logging inbound and outbound connections through my Linksys router

    Hi There,
    I have a  Linksys wireless router (WRT54G series) that I use to connect to the internet with my cable modem. I would like to be able to configure my home network to log inbound and outbound connections through my router. 
    My router, which I bought brand new a couple of years ago, provides some very basic logging through its administration interface.  I can view a current log of very recent (within the past couple of minutes) inbound and outbound connections/traffic.  However, I would like to be able to configure my network to log all inbound and outbound traffic for at least 1 or 2 days and have this log saved somewhere so I can retrieve and review it at a more convenient time.  I haven't been able to figure out how to do this with my current Linksys router and would like some help in configuring my system.
    Is it possible for me to configure (perhaps with a firmware upgrade or even by replacing my older Linksys router with a newer one) my router to continuously log a day or more's worth of inbound and outbound connections?  If this is possible, what changes do I need to implement?  Does Linksys offer a wireless router that has more sophisticated logging capabilities?  What is the longest log period that I can create with a Linksys router?
    If it's not possible to create such a log with my router, then what other components would I need to log this information?  I've thought about setting up a Linux server with two network cards installed to act as a gateway between my router and cable modem which will log traffic.  Would this be a good strategy to implement logging?
    Thanks in advance.
    Tom
    Message Edited by   on 07-28-2007 07:44 AM
    Message Edited by   on 07-28-2007 07:50 AM

    well...the router's in-built log will only provide basic information about the incoming/outgoing log . So, it will be a good idea to install a separate log viewer .....

  • Does the NetWeaver04Sr1 support JAX-RPC101 and JSR109 Standards?

    Does the NetWeaver04Sr1 support JAX-RPC101 and JSR109 Standards of Web Services???
    thank you very much?

    Hi Frank,
    I think this is only partially true.
    This enhancement only affects the condition editor (i.e. the namespaces within xpathes). For External Definitions the restriction persists. However, there is a simple workaround.
    When having defined your External Definition you will see a correct WSDL on the WSDL-tab. This WSDL contains the required message definitions. Unfortunately these message definitions are not displayed on the messages-tab because the target namespace of the WSDL is too long.
    Here is what you can do in this situation: Download the WSDL to your local file system. Edit this WSDL with notepad. Thereby simply replace the target namespace of the WSDL (not of the XSDs in the types-section!) by a shorter one. Upload this WSDL as another External Definition (category WSDL). You may worl with this External Definition now.
    This works because the target namespace of the WSDL has no influence on the structure of the message.
    Greetings
              Stephan
    Remark: Frank Beunings has added his answer inbetween. My answer was to Frank Bakermans.
    Message was edited by: Stephan Naundorf

  • Does Oracle database supports Windows server 2012?

    Does Oracle database supports Windows server 2012? If not, when it will be supported?

    Hi;
    Oracle not certified wiht win8 or win2012. Please check below note:
    Oracle - Compatibility Matrices and Release Information [ID 139580.1]
    11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
    Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
    Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

  • How to add Total Quantity in Inbound and Outbound Delivery screen

    Hi,
    I want to add Total quantity field in Inbound and Outbound Delivery screens.
    In document flow i can see the line item quantities in ALV Format, but if i select Display the totals above the entry check box
    in Change Layout--> Display, i didn't see any totals displayed.
    Please help me on this?
    Regards
    Bhuvana

    Hi
    If the field is a customer field, see BADI 'LE_SHP_TAB_CUST_HEAD'
    Regards
    Eduardo

  • Sharing Handling Units between Inbound and Outbound Delveries?

    Hello-
    I could use some guidance with how to best setup a handling unit scenario for a Third Party Purchasing process.
    1.) Sales Order for Third Party Purchased Material (Vended Finished Good) is created in ECC.
    2.) Purchase Order is sent to supplier.
    3.) Shipping Label is generated in SAP and is assigned a Handling Unit.  Label is sent to supplier.
    4.) Supplier affixes this label to product and ships it to our warehouse.
    5.) Goods Receipt is performed via Purchase Order (MIGO). 
    6.) Warehousing activities and Post Goods Issue of Outbound Delivery are performed via this label and Handling Unit.
    We would like to do a few new things with this process.
    A.) We would like to have the supplier provide us with the HU on their ASNs and generate a Packed Inbound Delivery from it. 
    B.) We would like the same HU to eventually be associated with the Outbound Delivery to the end customer. 
    Is their a best practice to share a Handling Unit across an Inbound and Outbound Delivery? 
    Is EWM Cross Docking the best way to accomplish this? 
    Are there other proven approaches?
    Thanks for your time and help.
    -Ron

    hi friend
    Handling unit number for identity of packing materail , pallet material carrying the carton ,carton the carrying the  material
    like FG  material and tray
    identification number controlling the handling unit numbers.
    with regards
    dinesh

  • Need IDOC inbound and outbound programs

    hi,
    i am new to xi.
    i want IDOCs , inbound and outbound / function module  programs for    PURCHASE ORDER
    and GOODS RECEIPT.
    ex:  BD10 for material master (matmas01).
    thanks and regards
    v ijender

    for purchase order.
    ORDERS / ORDERS04
    ORDCHG / ORDERS04
    ORDRSP / ORDERS04
    Programs
    RBDMIDOC – Creating IDoc Type from Change Pointers
    RSEOUT00 – Process all selected IDocs (EDI)
    RBDAPP01 - Inbound Processing of IDocs Ready for Transfer
    RSARFCEX - Execute Calls Not Yet Executed
    RBDMOIND - Status Conversion with Successful tRFC Execution
    RBDMANIN - Start error handling for non-posted IDocs
    RBDSTATE - Send Audit Confirmations
    FOr testing you can use WE19.
    and also check the below link
    http://www.erpgenie.com/sapedi/message_types_masterdata.htm
    regards
    kummari

  • To Monitor inbound and outbound messages for ECC 6.0 business system

    Hi Guys,
    I am working on ABAP proxy. I want to monitor the flow of Inbound and Outbound messages for my Business system (ECC 6.0).
    XI server is on a different system.
    I understand that SXMB_MONI is used for tracking XML messages. What kind of tracking can we do by this transaction in our Business system and the XI system?
    And how do I know whether the outbound XML message sent is lying in the Sending Business system or in the XI system?
    When I am testing my interface, there is a fault message generated. How do I know whether the fault message is being sent to XI?
    Thanks,
    James.

    James,
    Go to SXMB_MONI in your sending system.
    Here you will find a message ID fro your Message.
    Go to XI, --> SXMB_MONI -->Monitor For Processed XML messages --> Advanced Selection Crieteria and use the Message ID here to see if the Message has hit XI or not.
    Likeiwse it can be traced in the target system as well.
    The basic point,  The messages will have same Message Id on your R3 and on XI.
    Regards
    Bhavesh

Maybe you are looking for