Does Oracle Designer 10.1.2.6 work with OFM 11.1.1.6?

Hi there,
I understand Oracle does not support Designer anymore.
We are still using Oracle Desighner 10.1.2.6 (on Windows 7) to generate Forms.
We plan to upgrade the application server from 10g to 11g (OFM 11.1.1.6).
Will Oracle Forms generated from Designer 10g run on OFM 11.1.1.6 / WLS 10.3.6 (on Linux 64 bit)?
Thanks for any feedback,
Jim

There is not going to be a Designer for 11g. I've already asked the same question in this forum before, so have a look at:
Designer 11g?
What are the consequences if you want to upgrade to Forms/Reports 11, but there is no Designer for that version?Looks like parallel: development inside designer 10g and recompiling of the forms inside 11g. This works fine until new features of 11g will be used inside the Forms. Then you won't be able to generate everything from designer anymore.

Similar Messages

Does oracle jdbc driver 9.0.1 work with sdk 1.4?

Hi All Experts...
Does oracle jdbc driver 9.0.1 work with sdk 1.4.1? Ever since i have moved to 1.4 i am having problems. I keep getting the No Suitable Driver error or NoClassDefFoundError. I have everything in the classpath and i have also tried command line but to no avail. The JVM just refuses to pick up the classes12.zip file from the classpath.
The oracle site mentions that the 9.0.1 driver is for jdk 1.2 & 1.3 but it does NOT mention that it is NOT for 1.4.1. The site very explicitly mentions that the 9.2 driver is for 1.4.1. SO i am a little confused.This question may be stupid, but nevertheless,If i have to upgrade my driver from 9.0.1 to 9.2 then does that mean that i have to upgrade my DB as well?
Experts..please help.. THanks

Thanks a lot, as usual, MOD.
Now only if i can get my JVM to pick up the classes12.zip file from the classpath. I dont know if you read my previous posting today.

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

I have just purchased a new iMac OS Xlion version 10.7.3 and I'd like to install Windows. I have a disc for XP but the Boot Camp Assistant manual only refers to Windows 7. Please does anyone know if it will it work with XP.?

Get a Virtual Macine software program, Parallels, VMware Fusion or VirtualBox, and install XP in a virtual machine.
You can't install XP in a Boot Camp Partition with Lion or Mt Lion, only Win 7.

2013 Workflows created in SharePoint Designer doesn't seems to work with retension policy!

Hi Guys, 2013 Workflows created in SharePoint Designer doesn't seems to work with retension policy but 2010 workflows work. Any One have any details resaon or workarround?
Shafqat Balouch MCT, MCSA, MCSE MCITP, MCPD, Microsoft Partner

Hi ,
According to your description, I can reproduce your scenario in my SharePoint 2013.
For the Retention Policy, it will schedule how content is managed and disposed by specifying a sequence of retention stages. In SharePoint Designer Workflow 2013, we have looping option available. You can
use loop option and then pause for duration for achieving same function as Retention Policy to start a workflow.
Reference:
http://prasadtechtactics.blogspot.com/2012/07/sharepoint-designer-2013-workflows-part_24.html
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Does the QT MPEG2 Playback Component install & work with QT X ?

I am installing a new iMac with Snow Leopard.
Does the QT MPEG2 Playback Component install & work with QT X ?
(btw, I have already done the optional install of QT7 from the SN DVD).

Does the QT MPEG2 Playback Component install & work with QT X ?
I cannot get "muxed" MPEG2 content (e.g., VOB) file to load in QT X but both QT 7 Pro (with usual audio limitations) and MPEG Streamclip still function normally under Snow Leopard. (Since I don't normally use QT X, I had to actually run a quick test to see what would happen and haven't really performed any real tests. So take my comments with a grain of salt at this time.)
with such files on my PB Pro.

ITunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.

iTunes recognizes my device but the device does not show up for me to work with. Any idea where I go to access to device in iTunes. Going to File/Device is greyed out.

I think this article will help you.

When does Oracle plan to certify EBS R11 & R12 with MIcrosoft Office 2010?

When does Oracle plan to certify EBS R11 & R12 with MIcrosoft Office 2010?

Hi,
Keep monitoring Steven Chan blog for such alerts/announcements -- http://blogs.oracle.com/stevenChan/
Interim Update #1: Microsoft Office 2010 and E-Business Suite
http://blogs.oracle.com/stevenChan/2010/05/interim_update_1_office_2010_ebs.html
Thanks,
Hussein

Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw

Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw?

IP,
I believe you should ask over here:
Adobe Illustrator Draw

Does oracle application server's plsql program accord with corba criterion?

Does oracle application server's plsql program accord with corba criterion?

You need to purchase a have a support contract to have access to that.
You can try upgrading to the latest JDK 6 an latest WLS 10.3.6, you have the chance the issue is fixed in the latest 11g release.
Best Regards
Luz

Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav?

Does anyone have an Android phone that works with the hands free on a 2015 Honda Civic EXL -Nav? I don't care about the HondaLink- just the hands free phone call/receive.

My 5 starting doing this today....constant rebooting and or shutting off even after restoring to new phone. Would love some impu!!

Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
Here is the data and the response:
Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
ANS returned an error: 8 128 0 0 0 2
Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
ANS did not return a response.

Hello, can you please help me ?
You specified sample payload here:
TerrellFromLockhart wrote:
I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
About to read response at Thu Feb 20 15:40:20 CST 2014
SocketTimeoutException
2 - is clearly command
0 0 0 77 - frame length
1 - item Id
what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
Item id should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

Does Skype Click-to-Call no longer work with Chrom...

Does Skype Click-to-Call no longer work with Chrome? I spent a couple of hours with Google support and we couldn't see at as an extension. Uninstalled and re-installed chrome and Skype Click-to-Call.
Please advise....
FJ

Does Skype Click-to-Call no longer work with Chrome? I spent a couple of hours with Google support and we couldn't see at as an extension. Uninstalled and re-installed chrome and Skype Click-to-Call.
Please advise....
FJ

Does Oracle Designer 10g work with Oracle 10g Express?

Guys:
Does anybody know if Oracle Designer works with Oracle 10g Express?
Regards,
Mike Gorman

Designer will not work on express edition of the Oracle Database. You will need the Standard or the Enterprise Edition of the Database.

How does sharepoint designer create item in list work ?.

I'm using sharepoint 365, and the free sharepoint designer.
I'm trying to make something so that if List A gets an update other lists get new records to.
There is a sharepoint-designer action that lets one create a an item in another list.
And i have tested it a lot but haven't got any of my tests to work, been trying for a week now.
I'm not sure as how it is exactly named in English, since our sharepoint is al dutch :(
I think in English it looks like:
Create item in Yourlistname (save result in variable
Succes)
When clicking on yourlistname, you need the all valeus of all required items in the list.
Now asume such worklow rule is made to start after an Entry is made in List A, And we want to update List B
Here i start i think my problems
So you select List B as your listname, but then...
How does one refer, to a required link title from List A?. use current list item ?
How to link to a 4th table entry of List C as value to make in List B
If List A has a value that is clickable-link how to link that to Value B
If someone knows of problems with this, permissions things, or knows a youtube explaining it, or can explain it himself. It would be of great help to me.
Upon futher investigation, i got into problems where the workflow has to fill in an item
Into a column type that is a lookup table (another list), if work with string columns it works, but I need the current "name" as a lookup link connected into List B

Hi PGT,
I have seen a similar thread from you. The solution is that you need to work with Item ID's when you define the workflow to work with Lookup columns links. only at creation time you need to enter what field you like to include in your list. Based upon ID
it will then show the values. The thread is:
https://social.msdn.microsoft.com/Forums/office/en-US/e342e18a-3f68-4b49-9d80-41f11b76cb4e/how-does-sharepoint-designer-create-list-item-work-?forum=sharepointcustomization
I will mark this reply as answer to close this case. If you have any question about this issue, please feel free to reply.
Best Regards,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Does Oracle Designer 10.1.2.6 work with OFM 11.1.1.6?

Similar Messages

Maybe you are looking for