Does Oracle Tutor support ".xlsm" file format ?

Does Oracle Tutor support ".xlsm" file format ? Where to find the list of supported file formats?
Customer is using Microsoft Office Professional Plus 2010 and EBS R12.1.3.
Thx,
Phil.

Fonzi,
Good, then we are talking about the same thing when it comes to states.  The following defines all the digital logic states our hardware supports:
http://zone.ni.com/reference/en-XX/help/370520K-01​/hsdio/flogic_states/
A note in that document states the hardware modules that can support all the digital states.  The 6541 can still accept the WDT data type, since in your code it did let you.  It just doesn't support some of the digital states that it contains.  Since it doesn't have hardware compares, it can't handle the compare states.  If the WDT only had 
You are correct, you must use the WDT when using the extended digital states.  Its documented here:
http://zone.ni.com/reference/en-XX/help/370520J-01​/hsdio/digitalwaveformdata/
All of my resources have been found in the NI-HSDIO Digital Waveform Generator/Analyzer Help file, which is installed onto your computer with the HSDIO driver.  An online version can be found here:
http://zone.ni.com/reference/en-XX/help/370520K-01​/
Product Support Engineer
National Instruments

Similar Messages

  • Does PXI-6547 support WDT file format

    Please correct as needed....
    The Waveform Data Type (WDT) is the only file format within the HWS that supports the extended logic states of digital signals.
    Can this file format be used on the PXIe-6547 digital i/o module ?
    Solved!
    Go to Solution.

    Fonzi,
    Good, then we are talking about the same thing when it comes to states.  The following defines all the digital logic states our hardware supports:
    http://zone.ni.com/reference/en-XX/help/370520K-01​/hsdio/flogic_states/
    A note in that document states the hardware modules that can support all the digital states.  The 6541 can still accept the WDT data type, since in your code it did let you.  It just doesn't support some of the digital states that it contains.  Since it doesn't have hardware compares, it can't handle the compare states.  If the WDT only had 
    You are correct, you must use the WDT when using the extended digital states.  Its documented here:
    http://zone.ni.com/reference/en-XX/help/370520J-01​/hsdio/digitalwaveformdata/
    All of my resources have been found in the NI-HSDIO Digital Waveform Generator/Analyzer Help file, which is installed onto your computer with the HSDIO driver.  An online version can be found here:
    http://zone.ni.com/reference/en-XX/help/370520K-01​/
    Product Support Engineer
    National Instruments

  • How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tri

    How to fix file when it says, "Cannot open file " ". Adobe Indesign does not support the file format, a plug-in that supports the file may be missing, or file may be open in another application." It worked one second, I saved and closed the file, then tried to reopen and now it won't work. I am using Adobe InDesign CS5. It is the only version on my comp. I have tried opening on another comp & copying the file – same error comes up. PLEASE HELP

    First check the version of the document with Jongware's script "Identify.jsx" (ExtendScript/JavaScript).
    You can find it here:
    [Ann] Identify Your InDesign File
    If it is CS 5.5 or above, you need someone to open it in the version the script says and export an IDML representation from that. Another way would be to install a 30days version of CS6 or above (CC) and do it yourself.
    In regards of the script showing a result for InDesign files higher than CS6:
    CS7 = CC v9
    CS8 = CC v10 = CC-2014 or CC2014.1
    Uwe

  • Yesterday i made some purchases in itunestore. the download went well. till the synch of itunes with ipod. some of the downloaded music did noch synchronize. the message was: the ipod does not support the file format (mp4). strange, right?

    Yesterday 20 november I have made some purchases in Ittunestore. The download went well. Till the synch of itunes with ipod. Some of the downloaded music did noch synchronize. The message was: the ipod does not support the file format (mp4). Strange, right? All the rest of downloaded music items has been synchronised without any problems. What may be the problem?

    For music files purchased via the iTunes Store, Apple has used the following file extensions -
    .m4a unprotected AAC format music files
    .m4p protected AAC format music files
    .m4b protected Audio Books
    .m4r unprotected ringtones in AAC format
    As you can see Apple have never used .mp4 for music files via the iTunes Store.
    For videos Apple use .m4v and these are in H.264 format.
    You could try changing the file extension to .m4a, first then see if it plays on your computer and then try re-synching it.

  • Getting error "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    How to fix this problem
    "Cannot open the file "*****.INDD". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application."

    When I have seen this message it is either when I try to open a document with an older version of Indesign E.g. an indesign 2014 document with Indesign CC.
    The other time I have seen it is to open an Indesign CC document with Indesign 2014 which does not have Mindsuite - a plugin I use. Mindsuite, as yet, has not upgrade the plugin for Indesign 2014 therefore it recognises that a the document was created withe a plugin that the 2014 version does not have installed.
    I believe your problem will be something like that.

  • Does media hub support mov video format?

    Most of my video files are stored as .mov format. I just found out that none of these video files show up the media browser. I carefully checked the datasheet and user manual. On data sheet, it's shown as supported. On user manual, it's not in the list of supported video file format.
     Anyone has same experience. How you solved it? Thanks a bunch.

    YES, the media hub does support MOV Format. But I would like to clarify your concern when you said that "you can't see the files on the media hub". Do you mean that you can't see the files on the media browser even after copying the file to it? Or you just can't play the MOV files on the media browser even though you can see it? If it's the latter, then it might just be the plugin installed on your internet browser. Just update the plugins on your browser and you should be fine.
    Answer ID 17638 Playing Video Files From the NMH
    Answer ID 17686 Supported File Types for the Built-In Media Player in the NMH
    If installing the necessary plugins is not an option then you can play your files through an External Application on your computer.
    Answer ID 17460 Different Play Buttons for Certain Music Files

  • InDesign may not support this file format message?

    What do I do when I get a Adobe InDesign may not support this file format, a plug-in that supports this file format may be missing message?

    Do you understand the difference between embedded (all of the image data is stored within the file) and linked (what happens when you use File > Place.... where a pointer to the file stored in the file along with a screen preview)? You must deliberately embed images -- there's no way to do it automatically. Pasted graphics are also stored internally.
    As to why it no longer works? Probably a write error while saving, especially if this is saved on a network drive. Writing 9 gb takes some time, if the file was really that big and isn't cross-linked to something else.
    To keep ID file sizes down always Place images and graphics rather than pasting, and do a periodic Save As to remove old change data that will become useless file bloat when you close the file. I tend to add a version suffix when doing the Save As at any major change point, rather than overwriting the original, as it gives me an automatic backup chain and a way to go back to a previous version if I need to move in a different direction.
    Do you have a backup?

  • I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file

    I am running InDesign CS5.5 and trying to open an In Design File but getting an error message. " Cannot open the file "PDavidLCover.indd". Adobe InDesign may not support the file format, a plug-in that supports the file format may be missing, or the file me be open in another application."Please help I really need to get this file open.

    Since you've shown us the folder contents it's a good bet it isn't in use (no lock file). And it doesn't look like the file is mis-named as there doesn't seem to be anything else there that would be the .indd file (but just in case, open it in TextEdit and paste the first few lines here so we can see what the file header says), so the most likely case is the file is damaged. Is that on a removable device of some sort?
    You can try the tool at Repair corrupt InDesign Adobe files on Mac OS X  or send me a link to the file by private message and I'll try the recovery tool I have for Windows.

  • Camera RAW does NOT yet support raw files for the new  Canon Sureshot S95

    Camera RAW does NOT yet support raw files for the new
    Canon Sureshot S95.
    Adobe, please can you provide an update asap

    Hello!
    I think that you need to be patient.
    There has not been any release of Camera Raw since the release of the camera.
    I recommend to try the next version once it will be released, as there might be preliminary support (and therefore not listed).
    Usually, Adobe is amongs the firsts to support a new camera.
    Even though the Camera Raw team is fielded with wonderful coders, I do not think that they do have a time machine to allow support before they have their hands on a camera

  • Does Photoshop Elements support raw files from the Panasonic GH3 camera?

    Does Photoshop Elements support raw files from the Panasonic GH3 camera?

    Yes, if you have PSE 11 (not the mac app store version). You will need to go to Help>Updates in the editor to update ACR to 7.3.

  • Does iPhoto 11 support RAW files from Nikon D800?

    Does iPhoto 11 support Raw files from a Nikon D800 or do I need to upgrade to Apeture? I am running 10.7.4. and currently use iPhoto '09

    Aperature and iPhoto use the same RAW support - you probably need to upgrade to iPhoto '11  - purchase from the App store, backup your iPhoto library and upgrade - the RAW support list is here
    LN

  • Does Elements 12 support Raw files from Nikon D610

    Does Elements 12 support Raw files from Nikon D610

    Yes, as long as you update your camera raw plug-in (ACR) to version 8.3 using Help / Updates… in the PSE Editor.

  • Does this version support raw files?

    does this version support raw files?

    Kind of. Any RAW files can be imported by uploading them to Creative Cloud first. Even then, it's very basic; just importing and working with images like other image types; no RAW adjustments like those available in Camera Raw or Lightroom.
    Note this implies to existing supported camera RAW files. I'm not sure about brand-new cameras. (Usually, Adobe gets around to those cameras but it's not immediate.) Try it anyway if you're not sure.

  • Does 5800 Xpressmusic supports word files and acro...

    Does 5800 Xpressmusic supports word files and acrobat reader files?One has to download the application manually to run these related files or these applications are already there in phone

    You need Quickoffice to read MS Office files and Adobe Reader to read PDFs. Neither is preinstalled in the 5800XM, but you can download them from the phone's Download! application.

  • Does Oracle database supports Windows server 2012?

    Does Oracle database supports Windows server 2012? If not, when it will be supported?

    Hi;
    Oracle not certified wiht win8 or win2012. Please check below note:
    Oracle - Compatibility Matrices and Release Information [ID 139580.1]
    11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
    Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
    Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
    Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
    PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
    Regard
    Helios

Maybe you are looking for

  • Fcp 7.0.3 won't open

    Using fcp 7.0.3. When I open it quits stating a problem with Boris continuum Shaders plug-in. Any suggestions?

  • How to work with checkbox in a table

    hi im working with a table than shows SQL result and i put a column with checkboxes in the table how can i handle the rows with the checkbox in true ? i want to do it with a button thanks

  • Problem: iWeb adds directory to the path

    I have built my web site and bought my domain name www.janicerobertson.co.uk. When I publish my website to my web host Hostgator using FTP I get the following in the address bar of the browser: http://www.janicerobertson.co.uk/Janice_Robertson/Welcom

  • Record a word, with KeyboardEvent.KEY_DOWN

    Hello, I was wondering what a best practice is to capte a word. For example if someone types in 'hello' then a function should be initialized. Should i push every letter that is pressed in an Array? and check on every keydown if the word is in the ar

  • Presets or Bookmarks

    Is there a way to preset or bookmark the Internet Radio Stations in iTunes? I would like one click access. If anyone knows, I would appreciate it... J iMac G4   Mac OS X (10.4.3)