Does OracleAS 10g support business objects

How can I integrate Business Objects(BO) with OracleAS 10g Portal is there some built in portlet or plug in for this... and where can I find documentation for this...
Do you actually need to have a business objects license for each user to be able to run something through the Portal that was created in BO?

Not yet but look for new supported platforms docs when SP3 is released (Mayish). I still think windows 7 will work fine IMO but if you are looking for official testing/support then SP3 should have it.
Regards,
Tim

Similar Messages

Does Oracle 10g support Active Data-guard?

Hi all,
Can Oracle Database 10g support Active Data-guard?
Thanks you!
Dan
Edited by: Dan on Jul 12, 2011 10:13 AM

no, active data guard is 11gR1 new feature.
In Oracle Database 10g and below you could open the physical standby database for read-only activities (say, to offload some reporting), but only after stopping the recovery process. With these releases, If Data Guard is a part of your DR solution, you really can't afford to pause the recovery process for a long duration for fear of falling behind, so the physical standby database is essentially useless for any read-only activity.
With Oracle Database 11g, that situation changes: You can open the physical standby database in read-only mode and restart the recovery process. This means you can continue to be in sync with primary but can use the standby for reporting. (As in previous versions, you can take the backup from the standby as well.)
refer:- http://www.oracle.com/technetwork/articles/sql/11g-dataguard-083323.html

Does Oracle 10G supports 2 Oracle homes on same Host?

Hi,
I have installed oracle 10 G R2 on windows OS. I have installed oracle twice, i.e. i have two oracle homes. After installation these are the problems i am facing:
1. I am not able to start oracleDBconsoleorcl, OracleOraDb10g_home1TNSlistener services. I am not able to get sql command prompt for the oracle home1.
2. But I am able to start oracleDBconsoleorcl2, OracleOraDb10g_home2TNSlistener services. I am able to get sql command prompt for the oracle home2.
Can anyone please tell me what the problem is? Someone told me that in 10G i cannot have two Oracle homes. Is it true? if yes then waht is the work around for this problem.
Thanks
Varun

Why have you installed it twice?
You only need a single home for running any number of instances. (though I question the logic of the person who runs multiple database instances on the same platform as sop)
Running multiple homes are usually a solution when having to run two different version instances. E.g. installing Oracle 10G in addition to a 9i installation in order to create a 10G database to use for porting the 9i database, after which the 9i database and installation will be trashed.
Running two homes of the same version is silly - you're simply duplicating a truck load of static files, executables, libraries, message files and so on.. for what purpose?

Does Oracle 10G R2 support installation on Windows 2003 Domain Controller?

Does Oracle 10g R2 support installation on Windows 2003 Domain Controller? I remember that 10g R1 had issues with the DC? Is it still the case. Does it work now?
Any help is appreciated.
Regards,
Raghav

We have Oracle 10g R2 running on a Windows 2003 domain controller. It was not a domain controller when Oracle was installed. The domain was created after installation. (I don't recommend that procedure. I spent a long day fixing the installation after they configured the domain.) If Oracle is unhappy with being on a domain controller, it has not shown it yet.

Does Form 10g support database 8.1.7..? what version it support? Thanks.

Does Form 10g support database 8.1.7..? what version it support? Thanks.

I've never heard, that forms 10g not runs on 8.1.7.
The list of certified combinations can be found on metalink.oracle.com

Does Oracle 10g work with Windows 7?

Hi All,
I am using windows 7 ultimate 32 bit edition. does oracle 10g and forms & Reports 10g work with that? plz tell me.

Are you asking whether it is certified (i.e. whether Oracle has tested it and verified that it works)? Or are you asking whether it is an unsupported configuration that happens to work (more or less)?
Oracle hasn't certified any available version of Oracle on Windows 7. It is projecting that 11.2 will be certified on Windows 7. So it's not a supported configuration. Now, it's entirely possible that it could be installed and might work reasonably well. But I'd expect that a few things wouldn't work-- whether those are features you happen to be using, though, is a different question.
Justin

Does Oracle 10G XE collide with other installed Oracle products?

I have IDS 9i (Forms and Reports 9i) installed on my laptop for use with our remote database. Does Oracle 10G XE do anything with my Oracle home settings?
I have Windows XP SP1 on my laptop.
Mike

If you have Instant Client (or something that bundles the Instant Client, such as ZendCore for Oracle), in your path on Windows, then you will get problems, such as
1) The install spinning
2) SQLPlus crashing when launched
The offending DLL is called oraociei10.dll
Check to see if you have this in your environment. Search will do this for you. If you do, check to make sure that the corresponding directory is not in your path. if it is, then the fix is to remove the offending directory from your path.

Does Oracle Tutor support ".xlsm" file format ?

Does Oracle Tutor support ".xlsm" file format ? Where to find the list of supported file formats?
Customer is using Microsoft Office Professional Plus 2010 and EBS R12.1.3.
Thx,
Phil.

Fonzi,
Good, then we are talking about the same thing when it comes to states. The following defines all the digital logic states our hardware supports:
http://zone.ni.com/reference/en-XX/help/370520K-01/hsdio/flogic_states/
A note in that document states the hardware modules that can support all the digital states. The 6541 can still accept the WDT data type, since in your code it did let you. It just doesn't support some of the digital states that it contains. Since it doesn't have hardware compares, it can't handle the compare states. If the WDT only had
You are correct, you must use the WDT when using the extended digital states. Its documented here:
http://zone.ni.com/reference/en-XX/help/370520J-01/hsdio/digitalwaveformdata/
All of my resources have been found in the NI-HSDIO Digital Waveform Generator/Analyzer Help file, which is installed onto your computer with the HSDIO driver. An online version can be found here:
http://zone.ni.com/reference/en-XX/help/370520K-01/
Product Support Engineer
National Instruments

Does oracle 10g also has developer suite?

Hi,
I have a small doubt regarding release ....
does oracle 10g also has developer suite?

Yes 10g has a developer suite.
you can download it from
http://www.oracle.com/technology/software/products/ids/index.html

Does Oracle database supports Windows server 2012?

Does Oracle database supports Windows server 2012? If not, when it will be supported?

Hi;
Oracle not certified wiht win8 or win2012. Please check below note:
Oracle - Compatibility Matrices and Release Information [ID 139580.1]
11.2.0.x Oracle Database and Networking Patches for Microsoft Platforms [ID 1114533.1]
Statement of Direction: Oracle Database 11g Release 2 - Microsoft Windows 7 and Windows Server 2008 R2 [ID 867040.1]
Certification Information for Oracle Database on Microsoft Windows (64-bit) [ID 1307195.1]
Certification Information for Oracle Database on Microsoft Windows x86 (32-bit) [ID 1307189.1]
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

Does Oracle 10g express edition supports UTL_SMTP

Currently i'm using ORacle 10g Express edition, is it possible to send an automatic email once a value updates a table.
Does 10gExpress edition supports UTL_SMTP or UTL_MAIL. If supports let me know how to configure in 10gExpress edition .

It supports UTL_SMTP. You can check a couple of threads to see some demo usage of it.
Re: How to send Email with attachments
~ Madrid

Oracle 10g - Vista Business - Agent unreachable in EM

Hi,
I can't seem to get the agent to be seen from EM.
Here is my config:
Windows Vista Business - Oracle 10g R2
I have done the following:
- secured the dbconsole
- made sure that the OS user has admin rights & can log on as a batch job
- env. vars ORACLE_SID and EMHOSTNAME are set
The agent log shows no errors (start and shutdown successfully).
The emoms.log shows:
2009-11-24 09:32:54,545 [HttpRequestHandler-15512561] ERROR eml.OMSHandshake processFailure.619 -
OMSHandshake failed.(AGENT URL = https://DBServer:3938/emd/main)(ERROR = KEY_MISMATCH)
I have seen some threads where people advise to unsecure the dbconsole but I don't know how to do it.
Can anyone help ? I have done many changes, but nothing seems to make it work and I am a bit lost.
Thanks !
@lex
emctl upload does not work:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
EMD.properties (extract):
perlBin=D:\oracle\product\10.2.0\db_2\perl\5.8.3\bin\MSWin32-x86-multi-thread
scriptsDir=D:\oracle\product\10.2.0\db_2/sysman/admin/scripts
emdRoot=D:\oracle\product\10.2.0\db_2
agentStateDir=D:/oracle/product/10.2.0/db_2/DBServer_MyDB
chronosRoot=D:/oracle/product/10.2.0/db_2/DBServer_MyDB/sysman/emd/chronos
REPOSITORY_URL=https://DBServer:1158/em/upload/
agentSeed=-908248752
agentVersion=10.1.0.4.0
UploadInterval=5
UploadFailBackoffDBServert= 20
UploadTimeout=1800
UploadFileSize=2048
EMD_URL=https://DBServer:3938/emd/main
AgentListenOnAllNICs=TRUE
NormalThreadStackSize=0
ouiLoc=D:\oracle\product\10.2.0\db_2/oui
TrcFileMaxSize=4096
TrcFileMaxRolls=4
dynamicPropsComputeTimeout=60
EMAGENT_PERL_TRACE_LEVEL=ERROR
tracelevel.fetchlets.emSDK=WARN
httpTimeoutPrimaryHeader=30
httpTimeoutSecondaryHeaders=30
httpTimeoutBody=60
omsRecvDir=D:\oracle\product\10.2.0\db_2\DBServer_MyDB\sysman\recv
agentTZRegion=Europe/Brussels
Emoms.properties:
#Mon Nov 23 16:04:55 GMT 2009
oracle.sysman.emSDK.svlt.ConsoleServerName=DBServer_Management_Service
oracle.sysman.eml.mntr.emdRepPwd=81dbf93fefe9e409
emdrep.ping.pingCommand=ping <hostname>
oracle.sysman.eml.mntr.emdRepPort=1521
oracle.sysman.eml.mntr.emdRepDBName=MyDB
oracle.sysman.eml.mntr.emdRepPwdSeed=6610522536789545842
oracle.sysman.emSDK.svlt.ConsoleMode=standalone
oracle.sysman.emRep.dbConn.statementCacheSize=30
oracle.sysman.db.isqlplusUrl=http\://DBServer\:5560/isqlplus/dynamic
oracle.sysman.emSDK.svlt.ConsoleServerPort=1158
oracle.sysman.eml.mntr.emdRepRAC=FALSE
oracle.sysman.emSDK.emd.rt.useMonitoringCred=true
oracle.sysman.eml.mntr.emdRepPwdEncrypted=TRUE
oracle.sysman.db.isqlplusWebDBAUrl=http\://DBServer\:5560/isqlplus/dba/dynamic
oracle.sysman.emSDK.svlt.ConsoleServerHost=DBServer
oracle.sysman.eml.mntr.emdRepDBID=2250547128
oracle.sysman.emSDK.svlt.ConsoleServerHTTPSPort=1820
oracle.sysman.eml.mntr.emdRepSID=MyDB
oracle.sysman.eml.mntr.emdRepServer=DBServer
oracle.sysman.emSDK.sec.ReuseLogonPassword=true
oracle.sysman.eml.mntr.emdReDBServeronnectDescriptor=(DESCRIPTION\=(ADDRESS_LIST\=(ADDRESS\=(PROTOCOL\=TCP)(HOST\=DBServer)(PORT\=1521)))(CONNECT_DATA\=(SERVICE_NAME\=MyDB)))
oracle.sysman.eml.mntr.emdRepUser=SYSMAN
oracle.sysman.db.adm.conn.statementCacheSize=2
oracle.sysman.db.perf.conn.statementCacheSize=30
I ran emctl status agent:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
Agent Version : 10.1.0.4.1
OMS Version : 10.1.0.4.0
Protocol Version : 10.1.0.2.0
Agent Home : D:\oracle\product\10.2.0\db_2\DBServer_MyDB
Agent binaries : D:\oracle\product\10.2.0\db_2
Agent Process ID : 12148
Agent Process ID : 12148
Agent URL : https://DBServer:3938/emd/main
Started at : 2009-11-23 17:26:21
Started by user : SYSTEM
Last Reload : 2009-11-23 17:26:21
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 528
Size of XML files pending upload(MB) : 2.98
Available disk space on upload filesystem : 73.83%
Agent is Running and Ready
I ran emctl status dbconsole:
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
https://DBServer:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
Logs are generated in directory D:\oracle\product\10.2.0\db_2/DBServer_MyDB/sysman/log
----------------------------

Hi,
PLease can anyone help me ?
Thanks,
@lex

Oracle 10G support for both Cyrillic and Western European Character Sets

Dear all,
Our DB currently supports western EU characters sets but we need to also support Russian Characters.
Is there a common character set for both? or some trick that does the job?
Thanks.
DB: Oracle 10G R2
OS: Linux
Current Char Set:
NLS_CHARACTERSET     WE8ISO8859P1
NLS_CALENDAR     GREGORIAN
NLS_NCHAR_CHARACTERSET     AL16UTF16

AL32UTF8 will always do the job.
CL8ISO8859P5
CL8MSWIN1251
could to the job according to http://download.oracle.com/docs/cd/B19306_01/server.102/b14225/applocaledata.htm#sthref1960.
Edited by: P. Forstmann on 9 août 2011 17:41

Oracle 10g support for TRU 64 4.0.f

Hi,
I need some information on, Can Oracle 10g be installed on TRU64 unix version 4.0.f.
If it does not support directly, is there a patch available etc..
Can somebody confirm.
Thanks,
Nagarajan Dandapani

Hi,
Oracle 10gR1 is certified for Tru64 UNIX 5.1b.
Certification of Oracle 10gR2 for Tru64 UNIX 5.1b.is planned for 1st quarter 2006.
If it does not support directly, is there a patch available etc..No idea, perhaps can you create an iTAR to post the question.
But if you read the metalink note 283751.1 Pre-Install checks for 10gR1 RDBMS (10.1.x) - Tru64 Platforms, you can see that no workaround provide...
Nicolas.
Message was edited by:
N. Gasparotto
Adding metalink note reference.

Does Oracle Lite support Oracle Spatial

Does anybody know whether Oracle Lite or Personal Oracle supports the Oracle Spatial plug-in. Also, for extra credit does anybody know what the difference between Personal Oracle and Oracle Lite is?
We will be needing to provide some attribute and spatial data from our Oracle Enterprise database to several laptops for field personnel using an electronic map we developed. We would like to use a portable version of Oracle that supports Oracle Spatial objects.
Any help would be greatly appreciated.
Thanks
Dan

oh, I didn't realize it was so limited. No, that won't do. We're looking for a "mini" version of the real production database including stored code, triggers etc. Should be scaled down enough to allow rapid syncing of data and schema changes from the production (or really QA) database, but full enough to include the objects necessary to allow the developers to test their code changes to the front end applicaiton on their own environment.

Does OracleAS 10g support business objects

Similar Messages

Maybe you are looking for