Does OS 10 support the Canon Pixma mini260 printer?

Does OS 10.10.1 support the Canon Pixma mini260 printer?

The last driver that Canon released for this model was for OS X 10.7 and earlier. Here is a link to that driver. You may be able to install this driver on 10.10, although Gatekeeper will block its installation due to its digital signature. So you will have to right-click on the installer and select Open from the pop-up menu. You will then get the option to install the driver.

Similar Messages

  • Help!!!! I had to uninstall and then re-install the canon pixma mg3220 printer . Cannot find toolbar

    Help!  I had to uninstal and then re-instal the Canon Pixma MG 3220 printer.  Now, I cannot find the L shaped toolbar.  It doesn't exist.  Is there some way to get it installed on to my computer Windows 8.1????

    Do you mean Canon Quick Menu?  You can download it here:
    http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_one_inkjet_print...
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Can the Canon Pixma MX922 print pictures at only 4 x 6? If so, any other recommendations?

    I am looking for a printer that primarily prints photos. I am looking for one that can various sized photos, hopefully from wallet size, to bigger. Any suggestions would be greatly appreciated!

    OK. Understood. Easy Print Pro, which comes with the printer, will allow various layouts. You could do multiple wallet size on 4x6 or letter size.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • Can the Canon Pixma ix 6520 support manual duplex printing?

    I know that this printer doesn't support duplex printing but I was wondering how would I double side print manually with the canon pixma ix6520?
    Thanks!

    Hello thekay94.
    Manual duplex printing can be done by printing on one side at a time. 
    If you are printing from a Windows computer, please select the Duplex printing option in the Page Setup tab of the Printing Preferences menu.  If you are printing from a Mac, please use the options in the Layout menu to print the odd pages first, then load the stack back in the printer with the blank side facing you to print on the even numbered pages.
    If immediate assistance is needed, feel free to call us at 1-800-OKCANON.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Where can I find a tutorial for the Canon Pixma MG6220

    I am unable to make full use of the Canon Pixme MG6220 I purchased a few weeks ago. I am an 85 year old geezer and my old printer was pretty straight forward but had limited features whereas this Pixma 6220 is a great machine but I find it most intimidating to use some of its features and have had no luck in finding a tutorial online-------can anyone help me?????

    I dont know how I did it: I have found the manual, but it's extremely confusing. I am 70, not quite as old as the questioner.  I find this manual has too much content and I cannot find what I need (like almost every web page!). 
    We just bought the pixma MG6220 and have installed the driver on both our computers, and it's supposed to work wirelessly, and it does. Mine is a macbook air and we had to use the external drive to do the installation.
    But when it came to scanning photos in order to add them to the digital ones, the scanner could only find my husband's PC, not my macbook. I understand that you cannot simultaneously use both computers to scan. Do I have to switch off the other computer to use mine? Or do I have to attach the laptop with a wire to the printer. My laptop is near the new printer, but the husband's PC and modem are further away - but they work. I have spent several hours trying to solve this, which should have a very simple answer, but can find nothing. I didn't understand 99 per cent of the content of the manual, which is very disempowering. Could it not "hide" the more obscure content and make it accessible via specific links. I do not want to plug in the external drive every time I want to use the scanner or printer (I lose the mouse function).
    I also find it hard to navigate these community pages! What is tagging?

  • I am attempting to connect my Canon Pixma MG5220 printer/copier/scanner to my MacBook Pro OS 10.6.8.  After loading software from Canon and attempting to print, I get the following message: NT_STATUS_ACCESS_DENIED.  What can I do to fix this?

    I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP.  It works fine.  It has been successfully installed on my network and I am able to use it with my laptop running VISTA.  However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck.  I can see it as one of the printer choices when attempting to print; however, I get the following message:
    NT_STATUS_ACCESS_DENIED
    I have been searching for answers, but nothing seems to work yet.  Does anyone have any suggestions?
    Thanks.

    Let me understand:
    - you have purchased named canon, which is conencted to your PC running windows xp
    - downloaded driver for win xp, and canon works fine
    - canon is connected to that PC via USB
    - that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
    - now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
    or you set canon by being connected to your mac directly via USB?
    Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering.

  • Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer. Any solutions?

    Upgrade to Yosemite 10.10.1 caused my Canon Pixma ip8500 printer to stop working. Canon no longer supporting this printer. Any solutions?

    Hi
    try this
    resolve my printer problem.
    with Yosemite, Apple have upgraded CUPS to 2.0, and CUPS work different. So you need to change one think in configuration.
    open terminal, and write the following commands:
    sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
    you asked for the password for superuser
    sudo launchctl stop org.cups.cupsd
    after this check in print queue if the printer is ready and not in pause mode.
    The printer now should work, if the printer only print in B&W you need to change the configuration in CUPS web interface.
    try http://localhost:631/ ; if you receive a error telling the web interface is disabled, type in terminal services the following
    cupsctl WebInterface=yes
    after this try again http://localhost:631/ 
    after this choose in the web page "Adding Printers and Classes", bellow the CUPS for Administrators title.
    in the new page, choose manage printers; after this choose your printer.
    in the page of printer choose from the second combobox the option "set default options";
    in the option page, change the color mode from monochrome to color, and save hitting the button "set default option", you be asked for a user and password with admin privileges.
    After this your print is ok.

  • Image Capture does not recognize my Canon Pixma MP150 printer

    Image Capture does not recognize my Canon Pixma MP150 printer since I upgraded to Mavericks.

    To scan with Image Capture you need an ICA driver. Looking through the CanonDevices list in the /Library/Image Capture folder I cannot see an entry for the MP150. And I checked Canon Australia's web site and there is no ICA driver for the MP150. There is a scanner driver and MP Navigator for OS X 10.7. You may be able to install and use the driver and application on 10.9, although you will have to get past Gatekeeper to install both items as they are not digitally signed. To do this, you can hold down the Control key and click on the installer. A pop-up menu will appear and you can select Open. You will then be able to install the driver and then the application. If they do install then see if you can open MP Navigator and scan from the MP150.

  • Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?

    Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?    Thank you

    Mail updates are usually part of OSX System Updates and no stand-alone updates.
    Try downloading and installing the 10.6.8 Combo Updater from here http://support.apple.com/kb/DL1399
    Stefan

  • Macbook Air and the Canon Pixma MG2200

    Hi,
    I moved to England and am still using a Macbook Air from the US. I recently purchased a Canon Pixma MG2200 printer and would like to use it...however it will not work on my mac. I've download the necessary software, restarted my computer, purchased the correct usb chords, etc. It just simply won't appear on my computer at all. Any advice?

    I had a similar problem with my Canon printer but after it had been working.  It stopped wirelessly connecting to my MBA but did connect wirelessly to our MacBook.  I turned it and my MBA off, waited, turned them back on and it did not fix the problem.  Then we had some electrical work done on the house and the power was out for 15 minutes.  That fixed it!  So the first action I suggest you unplug it, wait a minute or more and then plug it in again.
    I found it useful to install the software form the CD provided with the printer rather than downloading the drivers.  The download options were confusing with different drivers for different functions and the scanner did not work from the System Preferences > Print & Scan menu until I installed the software from the CD.
    If all else fails contact Canon.  It could be DOA and clearly is covered under the Canon warranty.
    http://www.canon.co.uk/Support/Consumer_Products/Telephone_Numbers/telephone_num bers.aspx

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • Does Flash Paper support the PDF Bookmark functionality inside SWF?

       Does Flash Paper support the PDF Bookmark functionality inside SWF?

    I don't think you will be to happy with this, but I think it
    does not come with the Web Premium CS3 for the Mac:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_16582#flashpaper

  • Does Firefox OS support the use of VPN's?

    Simple question, does Firefox OS support the use of VPN's? If not is it a feature that will be added? And if so, when?

    Thank you for your interest and for purchasing a device! The bug reported has went through some employees. I'm sure that we'll get something done shortly.

  • I have the latest mac desktop  op mountain lion,plugged in the canon pixma ip90v and get a message drawing too much power from usb and it won't work?

    I cannot get the canon pixma ip90v to work with the computer.I get a message about drawing too much power from the usb.

    You need to plug in the power cord that was included with the printer and then use it with USB, or use the power cord included with the printer and access it wirelessly from your iMac. I access my Canon MP560 wirelessly from my iMac, which works well. 

  • When will Lightroom 5 support the Canon 7D Mark II

    Has anyone heard when Lightroom 5.6 will be updated to support the Canon 7D Mark II?

    Native Lightroom support for the D750 was added in the Lightroom 5.7 update released this evening.
    Release details:
    Lightroom 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/lightroom-5-7-now-available.html
    Camera Raw 5.7: http://blogs.adobe.com/lightroomjournal/2014/11/camera-raw-8-7-and-dng-converter-8-7-now-a vailable.html

Maybe you are looking for

  • How to remove device off your Apple ID account

    II'm trying to remove a device off my Apple ID account. How do I do that or if I am able to anyways? Shared an Apple ID account with a partner now it's over.

  • Custom report with  FAGLFLEXA and "Document type"

    We have new GL and we must do a custom report like this: Hierarchy of ProfitCentre ______Credit for mm.yyyy___ Debit for mm.yyyy  Profit centre 1_____________________ c1_______________d1 Profit centre 2_____________________ c2_______________d2 ect. .

  • Improve wifi signal?

    I live in a shared apartment. The router is placed in the hall and my room is across it on the inside. If I step out of the room, I get full signal, but inside the room I get two bars. I don't have a laptop or PC. I want to know how can I improve my

  • How do I disable -- almost permanently -- wireless for my MacBook?

    I know that by deleting the airport function from the network panel and then clicking the 'lock' that denies the computer the ability to connect to wireless signals automatically, but what I'm trying to do is to achieve the same result -- no wireless

  • Trial version of SAP Web Dynpro Developer Studio.

    Hi Experts, I have downloaded and installed the trial version of Java SAP NetWeaver Application Server. I now need to download Java SAP Web Dynpro Developer Studio. Can any one tell me where I can download the trial version of SAP Web Dynpro Develope