Does OS X Lion still allow me to have my standard desktop with my folders and files or is it only iOS style desktop now?

I am concerned because every picture of Lion I saw there is no folders on the desktop, there are only iOS style icons. I don't want to lose the folders I had on my desktop because I have them there as quick access. Will I still have the same ability to drag and drop files and folders on the desktop or is this fully iOS style now?

I believe I know what you are looking for. When I use lion, I was irritated that all my Icons Disappears from desktop..
Solution:
1) go to finder/preferences/general - and then check whatever you wanna show on desktop. does that help?

Similar Messages

  • My iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install :(?

    my iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install

    Apple support article:
    Startup Grey Screen
    You can try to check your hard drive.
    Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
    Apple Hardware Test

  • Preparing for Mountain Lion - what folders and files should be saved?

    Hi gang,
    Although some of you make think this is obvious, it really is not. In preparation for Mountain Lion, I curious what folders and files (other than the obvious) should I move off to another drive? I'm going to do a clean install this time around. I'll probably do an upgrade first to understand any gotcha's when I upgrade my wife's MBP later, then do a clean install.
    I'm going to move the documents, my Aperture and iPhoto libraries, but I'm unsure about the iTunes folder and my movies and such. Most of my software has come from the App Store, so I don't need to worry aobut those, and the few other programs I have the software for (iWork, iLife, but we'll probably need new versions of those.
    I just preparing a list to make sure that I get everthing.
    Thanks, Mark

    When doing a clean install OS upgrade I like to swap out the time machine drive, storing/retiring the old time machine as a backup of the old system while keeping it's Time Machine history.
    So personally what I do is:
    #1 clone my boot drive to an external (at this point I have two backups Time Machine + a clone)
    #2 wipe the boot drive and install new OS on it (at this point I still have two copies of my data TM + clone)
    #3 verifiy the old time machine is accessible from the new boot drive (sometimes due to ownership/permissions/filevault this is a problem so check even if migrating from clone)
    #4 selectively migrate files from clone or TM to new install
    #5 Start a new time machine of the new OS drive (sometimes I'll wipe the clone at this point and use it, prefering to keep the old TM as a archived backup)
    One note, I've burned myself at least once forgetting that I'd excluded some parts of my old drive from Time Machine drive (usually Podcasts, Movies), so pay attention to that before relying on it.

  • While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?

    While intending to perform a clean install of Mountain Lion while continuing with old apps and files, is it a waste to restore a backup that was made while running Mountain Lion as an UPgrade from Lion?
    Originally I was running Mountain Lion as an UPgrade from Lion. I created a backup in Time Machine, performed a clean install of Mountain Lion, then I proceeded to use Time Machine to restore the back up.
    When thinking about the essence of a back up restore, it occurrs to me that for all I know, I may have just wated my time IF Time Machine also restores all the old unneeded files that remain from Lion after an upgrade.
    Since the backup was made while running Mountain Lion as an upgrade from Lion, did restoring this backup defeat the purpose of a clean install by reinstalling old Lion files?
    If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
    -Chris

    Hello John!
    Thank you for your response which solved my problem. For other users who may stumble upon this, I'll clear up the confusion and share how I solved the problem with your help; When looking for answers to my computer problems, finding unresolved questions where person B offers a solution and person A never comes back and says "That worked, thank you.", it demonstrates a "k-thnx-bye" user mentality that leaves others with the same problem lost. Without further ado:
    It is not clear what you did because the meaning of "clean install" is vague. You can erase a volume and install an OS which leaves none of its previous content intact,
    This is what I did: I erased the volume leaving no previous content intact, while then installing OS X Mountain Lion.
    or you can upgrade an existing OS (or reinstall the same one) which does not alter your user - installed files.
    An upgrade to Mountain Lion from Lion is what I started with initially before erasing anything. This was undesirable. Since this can cause Macs to run slower (especially whereas I'm using a mid-2011 Mac Mini), my goal was to go from operating within an upgrade to Mountain Lion, to operating within an installation of Montain Lion that was not preceded by any other oprating system.
    Hence a "clean install of Mountain Lion while continuing with old apps and files" is confusing.
    Well put and understood. What I should have said was:
    1.Erase the volume
    2.Install Mountain Lion clean
    3.Confirm that Mountain Lion is functioning properly
    4.Proceed to use either Time Machine or Migration Assistant to Import/Migrate/Copy over only two things; My old apps (That had been stored originally in the designated Applications folder) and all files and folders originally stored in the home folder under users.
    If you restore from a Time Machine backup then all modifications that occurred subsequent to that backup become erased. It renders moot any OS X upgrade performed subsequent to that backup.
    That makes sense and is just as I later suspected.
    If so, how can I re-do the last portion of the process so that I get all my home-folder files and apps back without the full bulk of old Lion files? Migration assistant I'm guessing?
    Yes.
    This is what I did and everything works perfectly. Thank you so much once again!
    -Chris

  • New airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....

    new airport: can't get my macbook or my imac to join my wireless automatically, my other stuff still joins without problems but i have to join manually with the book and the imac ?? I've tried all the settings and every thing else I can think of.....
    Running on Lion, never had a problem before until the old airport died and I replaced it.

    try connecting the device in _*recovery mode*_, then restore from your backup.
    also, make sure [_*Apple Mobile Device Service*_|http://support.apple.com/kb/TS1567] is installed and started.
    JGG

  • My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?

    My New Tab Page does not work at all. I just have the empty squares with nothing in them at all?
    I know how to use about:config & have had the usual problems with newtab page tiles but this is more like a bug- using 33.0.1. Doesn't show tiles icon in top right corner just shows a gear that is used to hide the empty tiles that I can't fill with sites. First it would only show 2 rows of 4 columns even though I had it set to 5 & 6 then few days later for no reason they went empty with a serrated line around the tiles & can't drag from the bookmarks---- really bloody annoying!!!!!!! Possibly a setting in the about:config but i can't fig it out?

    Reset Firefox to its default state
    If you're having major problems which you can't resolve, start fresh with only your essential information.
    Troubleshooting Information
    This page contains technical information that might be useful when you're trying to solve a problem. If you are looking for answers to common questions about Firefox, check out our support website.
    Application Basics
    Name Firefox
    Version 33.0.1
    Update History
    User Agent Mozilla/5.0 (Windows NT 6.1; WOW64; rv:33.0) Gecko/20100101 Firefox/33.0
    Profile Folder
    Enabled Plugins about:plugins
    Build Configuration about:buildconfig
    Memory Use about:memory
    Multiprocess Windows 0/1
    Crash Reports for the Last 3 Days
    Report ID Submitted
    All Crash Reports
    Extensions
    Name Version Enabled ID
    Adblock Plus 2.6.5 true {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}
    Adblock Plus Pop-up Addon 0.9.2 true [email protected]
    Skype Click to Call 7.3.16540.9015 true {82AF8DCA-6DE9-405D-BD5E-43525BDAD38A}
    Trend Micro BEP Firefox Extension 8.0.0.1173 true [email protected]
    Trend Micro NSC Firefox Extension 6.8.0.1120 true {22C7F6C6-8D67-4534-92B5-529A0EC09405}
    Trend Micro Toolbar 7.0.0.1243 true {22181a4d-af90-4ca3-a569-faed9118d6bc}
    Graphics
    Adapter Description Intel(R) HD Graphics
    Adapter Drivers igdumd64 igd10umd64 igdumdx32 igd10umd32
    Adapter RAM Unknown
    Device ID 0x0046
    Direct2D Enabled true
    DirectWrite Enabled true (6.2.9200.16571)
    Driver Date 1-30-2013
    Driver Version 8.15.10.2993
    GPU #2 Active false
    GPU Accelerated Windows 1/1 Direct3D 11 (OMTC)
    Vendor ID 0x8086
    WebGL Renderer Google Inc. -- ANGLE (Intel(R) HD Graphics Direct3D9Ex vs_3_0 ps_3_0)
    windowLayerManagerRemote true
    AzureCanvasBackend direct2d
    AzureContentBackend direct2d
    AzureFallbackCanvasBackend cairo
    AzureSkiaAccelerated 0
    Important Modified Preferences
    Name Value accessibility.blockautorefresh true
    accessibility.typeaheadfind.flashBar 0
    browser.cache.disk.capacity 358400
    browser.cache.disk.smart_size_cached_value 358400
    browser.cache.disk.smart_size.first_run false
    browser.cache.disk.smart_size.use_old_max false
    browser.cache.frecency_experiment 1
    browser.places.smartBookmarksVersion 7
    browser.sessionstore.upgradeBackup.latestBuildID 20141023194920
    browser.startup.homepage www.google.com
    browser.startup.homepage_override.buildID 20141023194920
    browser.startup.homepage_override.mstone 33.0.1
    browser.tabs.loadInBackground false
    dom.mozApps.used true
    extensions.lastAppVersion 33.0.1
    font.internaluseonly.changed true
    gfx.direct3d.last_used_feature_level_idx 1
    keyword.URL http://www.bing.com/search?FORM=UP97DF&PC=UP97&q=
    media.gmp-gmpopenh264.lastUpdate 1413750166
    media.gmp-gmpopenh264.version 1.1
    media.gmp-manager.lastCheck 1414375733
    network.cookie.prefsMigrated true
    places.database.lastMaintenance 1414404204
    places.history.expiration.transient_current_max_pages 102059
    plugin.disable_full_page_plugin_for_types application/pdf
    plugin.importedState true
    plugin.state.npmedia 0
    plugin.state.nptimegrid 1
    print.printer_Canon_MG2100_series_Printer.print_bgcolor false
    print.printer_Canon_MG2100_series_Printer.print_bgimages false
    print.printer_Canon_MG2100_series_Printer.print_colorspace
    print.printer_Canon_MG2100_series_Printer.print_command
    print.printer_Canon_MG2100_series_Printer.print_downloadfonts false
    print.printer_Canon_MG2100_series_Printer.print_duplex 3997817
    print.printer_Canon_MG2100_series_Printer.print_edge_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_edge_left 0
    print.printer_Canon_MG2100_series_Printer.print_edge_right 0
    print.printer_Canon_MG2100_series_Printer.print_edge_top 0
    print.printer_Canon_MG2100_series_Printer.print_evenpages true
    print.printer_Canon_MG2100_series_Printer.print_footercenter
    print.printer_Canon_MG2100_series_Printer.print_footerleft &PT
    print.printer_Canon_MG2100_series_Printer.print_footerright &D
    print.printer_Canon_MG2100_series_Printer.print_headercenter
    print.printer_Canon_MG2100_series_Printer.print_headerleft &T
    print.printer_Canon_MG2100_series_Printer.print_headerright &U
    print.printer_Canon_MG2100_series_Printer.print_in_color true
    print.printer_Canon_MG2100_series_Printer.print_margin_bottom 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_left 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_right 0.5
    print.printer_Canon_MG2100_series_Printer.print_margin_top 0.5
    print.printer_Canon_MG2100_series_Printer.print_oddpages true
    print.printer_Canon_MG2100_series_Printer.print_orientation 0
    print.printer_Canon_MG2100_series_Printer.print_page_delay 50
    print.printer_Canon_MG2100_series_Printer.print_paper_data 1
    print.printer_Canon_MG2100_series_Printer.print_paper_height 11.00
    print.printer_Canon_MG2100_series_Printer.print_paper_name
    print.printer_Canon_MG2100_series_Printer.print_paper_size_type 0
    print.printer_Canon_MG2100_series_Printer.print_paper_size_unit 0
    print.printer_Canon_MG2100_series_Printer.print_paper_width 8.50
    print.printer_Canon_MG2100_series_Printer.print_plex_name
    print.printer_Canon_MG2100_series_Printer.print_resolution 7602290
    print.printer_Canon_MG2100_series_Printer.print_resolution_name
    print.printer_Canon_MG2100_series_Printer.print_reversed false
    print.printer_Canon_MG2100_series_Printer.print_scaling 1.00
    print.printer_Canon_MG2100_series_Printer.print_shrink_to_fit true
    print.printer_Canon_MG2100_series_Printer.print_to_file false
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_bottom 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_left 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_right 0
    print.printer_Canon_MG2100_series_Printer.print_unwriteable_margin_top 0
    privacy.sanitize.migrateFx3Prefs true
    privacy.sanitize.timeSpan 2
    storage.vacuum.last.index 1
    storage.vacuum.last.places.sqlite 1412311800
    Important Locked Preferences
    Name Value
    JavaScript
    Incremental GC true
    Accessibility
    Activated false
    Prevent Accessibility 0
    Library Versions
    Expected minimum version Version in use
    NSPR 4.10.7 4.10.7
    NSS 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSMIME 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSSSL 3.17.1 Basic ECC 3.17.1 Basic ECC
    NSSUTIL 3.17.1 3.17.1
    Experimental Features
    Name ID Description Active End Date Homepage

  • I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I have a Windows 2003 Server 64-Bit, and when I upgraded to Firefox 4.0.1 now it won't run, it keeps saying to restart the computer to complete the installation, but I've restarted theserver 4 times, and I still can't use it.

    I ended up putting it in DFU mode.  It's kinda hard to tell it was in DFU mode because nothing showed on the screen, it was just black, but the sounds from the computer helped to tell me it was connected.
    Itunes still didn't recognize the device for whatever reason.
    So I used redsn0w.  I don't know if I can say that on these forums, but considering itunes was worthless at this point I am going to give credit where credit is due.
    Now I am giving itunes a second chance to upgrade to 5.1, if it doesn't work, well, back to redsnow and maybe I will even jailbreak it this time rather than just using the fecovery fix found under extras.

  • I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?

    I have an old project with AVCHD clips and I want to import the clips again with surround sound. How can I relink the project clips to the re-imported ones without doing the project from the begining?
    I have a sony handicam and I imported the clips to iMovie and they lost quality and converted the audio to stereo. I want to import the project to final cut X and import the AVCHD in 1080p and surround sound and export the movie in bluray. Can I relink the clips without editing everything again?
    thanks!

    Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad - either via the trashcan icon in the top right corner if viewing the photo in full screen, or via the icon of the box with the arrow coming out of it in thumbnail view.
    Photos that were synced from a computer are deleted by moving/removing/de-selecting them from where they were synced from and then re-syncing. If you want to remove them all then normally you could just sync an empty folder (in terms of photos) to the iPad, but as you don't want to sync at the moment you can't do that.
    You can reset the iPad back to factory settings and start from scratch with it : Settings > General > Reset > Erase All Content And Settings

  • How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

    How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

    How can I filter to find photos NOT pinned to a map? I have 28,000 phots with many mapped and many not. The Search function does not include GPS data. I haven't found  way to search metadata inside or out of Elements.

  • I have iphoto 8.1.2 .If i buy and instal iphoto 9.5.1 does that mean that i will loose all my folders and files?

    i have iphoto 8.1.2 .If i buy and instal iphoto 9.5.1 does that mean that i will loose all my folders and files?

    LarryHN wrote:
    Unfortunately the facts contradict your opinions - the facts are that Apple has stated that iPhoto can continue to be used and that you can seamlessly migrate form iPhoto to photos - you are telling people to do and not do things based on your personal opinions
    Uh, perhaps you should learn to read what was actually written.
    What did I tell anyone to do/not do?
    What was my "opinion"?
    I wrote, "However, note that iPhoto is going away, soon to be replaced soon by the new Photos app".
    the facts are that Apple has stated that iPhoto can continue to be used and that you can seamlessly migrate form iPhoto to photos
    I never suggested, hinted or stated otherwise...
    Are you stating that Apple is going to continue on with iPhoto & it is NOT going to be replaced by the Photos app?
    and how does all this help the OP?

  • I have shared an acount with my mother and now i have moved. Is it possible to create my own acount and still have all my aplication and games available?

    I have shared an acount with my mother and now i have moved. Is it possible to create my own acount and still have all my aplication and games available?

    Yes, you can keep the apps and music, but not transfer them to your new account, so if you want to download past purchases or update any of them you'll need the password of the apple ID with which you first bought them.

  • Can I retrieve contacts that I deleted from an email account on my IPhone that I no longer have access to? I have synced the contacts with my computer and have not synced since I deleted the mail account on my Iphone. Can I still retrieve the contacts?

    can I retrieve contacts that I deleted from an email account on my IPhone that I no longer have access to? I have synced the contacts with my computer and have not synced since I deleted the mail account on my Iphone. Can I still retrieve the contacts on my home computer?

    This might be a problem as it is a company mail account that I no longer work for.
    Could I...
    Plug iphone into pc and click Restore in iTunes?
    Then using ICloud, retrieve all the data lost in the restore?

  • I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras.  The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook.  Have tried Safari and Firefox browsers.

    I have a MacBook Air with OS X and am having trouble accessing the ADT Pulse Home Security System cameras.  The mobile (iPhone and iPad) apps allow access no problem, but I can't get a picture on the MacBook.  Have tried Safari and Firefox browsers.  Anyone have any ideas?  Thanks.

    From a Catherine to Katherine -- Had the exact same problem!!  I had to enable Java twice - both in Safari and then on the MacBookAir itself.

  • I just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear

    i just update my iphone 4s to ios 7.0.4 and update my macbook pro to ios maveric. Now, my iphone 4s does not sound form the speaker and the volume button up and down also does not work.I could hear the sound through the earphone. Also the airplay disapear. Please advice how to downgrade to the previous OS

    Please try going to your settings area of your display. Click on General and go to 'reset all settings'
    Good luck!

  • My friend have new Macbook Air with OSX Mavericks and I have Macbook Pro with OSX Mountain Lion, Can I create a bootable maverick in pendrive from macbook air and perform a clean installation/update on my macbook pro with osx mountain lion?

    I have late 2012 edition Macbook Pro, I have a internet connection with does not run smoothly It gets disconnected and reconnects Thus I failed everytime when I update my OSX Mountain Lion to Mavericks in App Store. My friend just bought 2013 end Macbook Air whicch have OSX Mavericks pre installed.
    I was hoping if I can create a OS X version in pendrive from his laptop and use that to install and thuss also update OS on my Mountain Lion.
    Kindly explain me in detail how to perform this.
    I have already taken back up of all files and I am ready to total clean my laptop.
    And I want to update to Maverick so I can thus further update to upcoming OS X Yosemite.

    The Mavericks on the Air is probably machine specific since it came pre-installed, so it wouldn't work on your computer. See if your friend will let you access the App Store, where you can sign in using your Apple ID and download the installer. You can use this free program to copy the installer and update your computer.
    Bootable USB Flash Drive – Diskmaker X

Maybe you are looking for

  • How to convert cs3 psd files for use in Camera Raw?

    I have very many psd files that I want to adjust in Camera Raw and Smart Oblects. They are full resolution scanned Kodachrome slides. Please help.  Kit Pravda

  • Max is not working in infopath form 2010

    Hi, I have created one form in infopath 2010. I want to get maximum id of a table when i click on new record. I am trying to use max() function for the same. But its not working for me. Please help to solve the issue. Thanks in advance! Regards Rajni

  • Text Field Label?

    I have created a form with expandable fields. I have a couple fields that I want to have text label in but I want the label to disappear when the user types in the field. Is this possible? I found where I can add a label of sorts but it needs to be m

  • MuVo TX FM display and power prob

    hello to all! good evening...i've been the owner of a creative MuVo TX FM for a little over a year now and im extremely satisfied with it. it was extremely reliable and handy and was a worthy competitor against the shuffle...it never gave me any prob

  • Risk Resolution in RAR

    hi experts, It looks like it is possible in AC RAR to directly chosse a risk resolution after a risk analysis. But when I select "remove access " or "delimit access" the button submit is always gray(impossible to click). It probably comes from a cust